Mohammed Waseem is applying for the position of QC Piping/Welding Inspector. He has over 6 years of experience in quality control activities like piping/welding inspection, NDT testing, and documentation review for various oil, gas, and petrochemical projects in Saudi Arabia. He holds an B.Tech in Mechanical Engineering and welding inspector certification. His responsibilities have included material inspection, welding procedure review, witnessing tests, and ensuring work meets standards and client requirements.

1. Curriculum Vitae
NNAMEAME:: MMOHAMMEDOHAMMED WWASEEMASEEM
PPOSTOST AAPPLIEDPPLIED FORFOR QC- PQC- PIPINGIPING/W/WELDINGELDING INSPECTORINSPECTOR
SkypeID/ContactNo Mohammedwaseem30 / 00966509627317
MMAILAIL IIDD mail2mohdwaseem@gmail.com, mech.engg319@gmail.com
PPASSPORTASSPORT NNUMBERUMBER K6890094 (VK6890094 (VALIDALID TTILLILL 16-10-2022)16-10-2022)
AAVAILABILITYVAILABILITY:: 1 M1 MONTHONTH
NNATIONALITYATIONALITY:: IINDIANNDIAN
CAREER OBJECTIVE:
Primary objective is to continue career development in the field of welding and quality control. Seeks a
senior position, where I shall be able to make significant contributions and make use of the experience,
technical knowledge and skills gained in previous positions. Would welcome challenging and stimulating
work environment and willing to make long term commitment to meet these ends.
QUALIFICATION & CERTIFICATIONS.
 B.Tech in Mechanical Engineering from lords institute of Engineering an Technology, Jawaharlal
Nehru Technological University.
 CSWIP 3.1 Certified Welding Inspector by TWI (CERT NO :- 99318)
 Diploma in Process piping Enginering as per ASME B 31.3.
 Diploma in PDMS ( Plant Design Management System).
 Attended 1 week training course of TQM & ISO 9001-2008.
COMPUTER PROFICIENCY :
• SOFTWARE’S : AUTO CAD (Drafting and Modeling), SAP (PP module).
• Languages : C, C++, and Microsoft Visual Basic
• Productivity : Microsoft Office 2013 (Excel, Word, Power Point).
PROFILE:
I am a Competent, diligent & result oriented professional SAUDI ARAMCO APPROVED QC Mech- Piping
inspector with 6+ years of strong experience in Power, refinery Petrochemical, oil and gas projects.
Insightful knowledge and experience of QA/QC activities like Piping/Welding inspection, NDT,
Hydrostatic/pneumatic tesitng, Helium leak test Structural fabrication, and review of documents like QC
procedures, ITP, WPS ,PQR, WQT Etc. working experience in centrifugal compressor and steam turbine
assembly inspection. Material Handled: CS, CS NACE, LTCS, SS (304, 304L, 316 ,316L and low alloy steels
( P5, P9, P11, P22 grades). Working experience with various code and standards such as API, ASTM, ASME
Section II, V, VIII, IX, ANSI/ASME B 31.1, B 31.3, B31.4, and 31.8 , AWS D 1.1, saudi aramco standards.
Excellent communication skills, a strong team leader,and always make an effort to provide the client with a
quality of service that meets contractual obligations, measurement of control with cost, resolve issues as
they arise and willingness to deliver results.
PROFESSIONL EXPERIENCE:
1. Name of organization:- Nesma & Partners Cont.Co.Ltd. Al-Khobar,(Saudia Arbia).
Project : SAUDI ARAMCO DOW ARABIA (SADARA CHEMICAL
CONVERSION PROJECT)
Designation : QC Engineer Mechanical Piping/Welding.
Mohammed Waseem
QC Engineer MECH-Piping/Welding PAGE 1 OF 4

2. Curriculum Vitae
Client : Foster Wheeler
Inclusive dates : Nov, 2014 – Present
Location : Jubail 2 industrial city II.
• Project : SEWAGE TREATMENT PLANT
Designation : QC Engineer Mechanical Piping/Welding.
Client : SAUDI ARAMCO
Inclusive dates : May, 2014 – Nov 2014
Location : Thuwal Jeddah.
• Project : PCC NYLON 6.6
Designation : QC Engineer Mechanical Piping/Welding.
Client : PETRO CHEMICAL CONVERSION COMPANY. LTD
Inclusive dates : Aug, 2013 – April 2014
Main Contractor: JACOB, ZAMEL & TURBAG CONSULTING COMPANY
Location : Jubail2 Industrial city.
• Project : JUBAIL EXPORT REFINERY PROJECT(DELAYED COKER PROJECT
PACKAGE 4)
Designation : QC Engineer Mechanical Piping/Welding.
Client : SAUDI ARAMCO TOTAL OIL REFINERY PROJECT
Main Contractor: CONSORTIUM OF CHIYODA PETROSTAR / SAMSUNG
SAUDI ARABIA
Inclusive dates : Dec, 2012 – August 2013
Location : Jubail 2 Industrial city.
JOB PROFILE AND RESPONSIBLITIES:
● Review of project applicable drawings, QC Procedures, and all related documents, preparation of ITP,
check lists, method of statement. Identify area deficient in regard to achieving quality, progress
schedules; represent QC in all areas of inspection.
● Conduct line check to verify the overall completeness of installed piping system. Ensure that examination
and test required by the inspection and test plan (ITP) had been performed with satisfactory results.
● Reporting to the QA/QC Manager in day to day progress of work .
● Responsible for raising RFI for the inspection on daily basis.
● Material receiving inspection , prepare damage reports, if found any. like Consumable, pipes, plates,
fittings, valves, bolt, nuts, structural item and Equipment etc, Review of mill test certificates and
consumable certificate as per requirement , prepare damage reports, if found any.
● PMI test witness and reporting for stainless steel.
● Review the track record of periodic calibration of welding machines, baking/drying ovens, pressure
gauges, and other instruments.
● Good knowledge of reading isometric and P&ID.
● Monitor and verify the welding parameter as per approved WPS and ensure that only approved welding
procedures are followed and welders are qualified.
● Witnessing shop and field fabrication, visual inspection of welding before, during and after the welding
process and ensuring that it is free from welding defects (e.g. undercut, pin hole, porosities, start / stop
crater …etc) and meeting the drawing and code requirements.
● preparing fit up and Daily Welding report, inspection of structural welding.
● Monitoring and witnessing the preheat, post heating & PWHT activities.
● Spool Released Inspection and site erection and assembly inspection.
● Witness NDT- RT, PT, and MPT inspection of weld joints.
● Requesting and coordinating with third party inspectors for Non Destructive Testing of welds as per
ASME V.
● Good working Knowledge in all welding process (SMAW, GTAW, SAW etc ).
Mohammed Waseem
QC Engineer MECH-Piping/Welding PAGE 2 OF 4

3. Curriculum Vitae
● Witnessing welder’s qualification test and qualifying welders for different base metals, materials &
thickness if required according to ASME Sec IX.
● Review of hydro test package to ensure that all the related documents are attached in the test package as
per the project requirements prior to hydro test.
●` Prepare Punch list during walk down with client prior to testing, Verification of pre test punch list(A &
B).
● Prepare the test package status and progress reports.
● Witness the pressure testing (Hydro test, Pneumatic test) of piping system.
● Flange Joint Assembly and Orifice flange flush grinding inspection.
● Raise Site Non-Conformances Report and Investigate Corrective actions.
● Visual inspection of flanges, gaskets, and bolts, prior to installation, Witnessing & making reports of bolt
torque .
● Witness the layup , Re-instatement inspection and verification punch list items.
● Attending the meetings with construction and client to resolve the site technical queries.
● Excellent communication and documentation skills, with ability to communicate technical issues to the
Manager, clients, and the fabrication facility.
● Attending the meeting with client before walk down of sub systems and systems for making
precommissioning MC Punch list.
● Preparing quality inspection reports and dossiers for Project Submittal.
2) Worked in BHEL (Bharat Heavy Electricals Limited, India) as a Project Assistant under Quality
Control of Steam Turbine & Compressors Department since JAN-2010 to NOV-2012.
Projects Successfully Completed:
• Client : Tabriz oil and refiner, Iraq.
Designation : QC Inspector (Shop)
Description : BCL (407A Centrifugal gas compressor)
• Client : National thermal power corporation, India
Designation : QC Inspector (Shop)
Description : BFP Steam turbine
• Client : Indian oil corporation limited, Paradip.
Designation : QC Inspector (Shop)
Description : BCL (407A centrifugal gas compressor)
• Client : Larson and Tubro, Mumbai.
Designation : QC Inspector (Shop)
description : (Steam Turbine)
• Client : Mangalore refinery petrochemical limited
Designation : QC Inspector (Shop)
Description : 2mcl (807 centrifugal gas compressor)
● Knowledge of applicable codes, standards, ITP, project specification and procedure.
● Review of applicable project drawings, specifications and related documents.
● Responsible for raising RFI for the inspection on daily basis.
● Ensure that examination and test required by the inspection and test plan (ITP) had been performed
with satisfactory results
● Inspection of incoming materials and Review the product & material test certificate and consumables
certificate as per requirements.
● Inspection of welding consumables and storage, monitoring the weld parameters of different welding
process in accordance with WPS and PQR, Monitoring of Pre-heating/Post Heating/PWHT and Electrode
Mohammed Waseem
QC Engineer MECH-Piping/Welding PAGE 3 OF 4

4. Curriculum Vitae
backing activities, inspection of joints before, during & after welding according with WPS and applicable
standards/codes.
● Preparation of punch list item A and B prior to testing.
● verify preparation of testing package including piping test record, check & assure that all joints are
exposed for examination during pressure test.
● Prepare and conduct Hydrostatic test and Helium Leak test for Centrifugal Compressor casing, Exhaust
hood of Turbine, Oil and Gas pipe lines of Compressors and Turbine.
● Prepare and conduct Magnetic Particle Test, Liquid Penetrant Test, for Centrifugal Compressor casing,
Exhaust hood of Turbine, Oil and Gas pipe lines.
● To coordinate with the Clients related to quality issues and Inspection.
● Checking the mechanical run out test of Steam Turbine and Centrifugal gas compressor rotors.
● Clearance Check and Assembly Inspection.
● Inspect and witness re-instatement bolt torquing of flanged joints prior to final pipingcompletion.
● Post Test Inspection of Bearings.
● Painting Inspection and Preservation.
● Pre-Dispatch Check
● Preparing of Inspection reports and other documents for Project Submittal
● Maintain all documentation involved during inspection for QC record and traceability.
● Issue of Final Inspection release reports to the client.
● Communicating with customer, third party inspector for the further queries and any special
requirement.
APPROVED QC INSPECTOR BY :
• SAUDI ARAMCO TOTAL OIL REFINERY PROJECT QUALITY TEAM
• CHYODA PETROCHEMICAL /SAMSUNG ARABIA QUALITY TEAM
• SAUDI ARAMCO DOW ARABIA/FOSTER WHEELER QUALITY TEAM.
• SAUDI ARAMCO QUALITY TEAM ( JUBAIL BLUNK PLANT).
PERSONAL DETAILS :
• Father Name : Mohd Azeem
• Date of birth : 14-04-1989
• Languages known: English, Hindi and Urdu
• Marital status : Unmarried
ACHIEVEMENT :
Presented Technical paper on “INSPECTION AND MAINTANANCE OF ROLLER BERAING” at south central
railway during project work and won the first prize in Engineering College.
Place : Jubail II Mohammed Waseem
Mohammed Waseem
QC Engineer MECH-Piping/Welding PAGE 4 OF 4