CONTENT DELIVERED:
Knowing about the materials around us and trying to revolutionize them for the betterment of the humankind should be a priority to all engineers irrespective of their discipline. In an attempt to introduce materials and their impact on daily life and innovations that have happened on the past from Stone Age to the impending one well into the futuristic world were unveiled to the audience. From the historical perspective cutting through the different eras and the evolution of different materials due to the cultural and industrial revolutions were discussed. The significant classification of the materials from the past to the present and into the future was also revealed to the students.
Highlighting the due importance of the failure analysis from the pieces of the history made the audience to understand its utmost importance in their pursuit toward perfection in whatever they are intend to design.Titanic,Bhopal and Columbia tragedies and their message to the engineers were narrated.
The good, bad and ugly parts of the plastics were highlighted by citing crucial examples across the world and in particular from USA, the super power.Guidence regarding this were taken from International youth programme and summit 2012. This was done with an intention of narrating them different aspects of plastics and what they are supposed to do to save earth and future generation from the perils of it. Finally the career options in this discipline were also shown to them.
this ppt describes materials ,metals, ceremics and its types, polymer, composites etc.
u can study more topics of material science on this you tube channel
https://www.youtube.com/playlist?list=PLAd8Bzun6OmL4Sg2sKbDJ1b5PZZ0Vb5Hu
Materials Engineering and Metallurgy Lecture NotesFellowBuddy.com
FellowBuddy.com is an innovative platform that brings students together to share notes, exam papers, study guides, project reports and presentation for upcoming exams.
We connect Students who have an understanding of course material with Students who need help.
Benefits:-
# Students can catch up on notes they missed because of an absence.
# Underachievers can find peer developed notes that break down lecture and study material in a way that they can understand
# Students can earn better grades, save time and study effectively
Our Vision & Mission – Simplifying Students Life
Our Belief – “The great breakthrough in your life comes when you realize it, that you can learn anything you need to learn; to accomplish any goal that you have set for yourself. This means there are no limits on what you can be, have or do.”
Like Us - https://www.facebook.com/FellowBuddycom
This module deals with the classification of the engineering materials and their processing techniques. The engineering materials can broadly be classified as:a) Ferrous Metals ,b) Non-ferrous Metals (aluminum, magnesium, copper, nickel, titanium) ,c) Plastics (thermoplastics, thermosets) ,d) Ceramics and Diamond,e) Composite Materials & f) Nano-materials.
this ppt describes materials ,metals, ceremics and its types, polymer, composites etc.
u can study more topics of material science on this you tube channel
https://www.youtube.com/playlist?list=PLAd8Bzun6OmL4Sg2sKbDJ1b5PZZ0Vb5Hu
Materials Engineering and Metallurgy Lecture NotesFellowBuddy.com
FellowBuddy.com is an innovative platform that brings students together to share notes, exam papers, study guides, project reports and presentation for upcoming exams.
We connect Students who have an understanding of course material with Students who need help.
Benefits:-
# Students can catch up on notes they missed because of an absence.
# Underachievers can find peer developed notes that break down lecture and study material in a way that they can understand
# Students can earn better grades, save time and study effectively
Our Vision & Mission – Simplifying Students Life
Our Belief – “The great breakthrough in your life comes when you realize it, that you can learn anything you need to learn; to accomplish any goal that you have set for yourself. This means there are no limits on what you can be, have or do.”
Like Us - https://www.facebook.com/FellowBuddycom
This module deals with the classification of the engineering materials and their processing techniques. The engineering materials can broadly be classified as:a) Ferrous Metals ,b) Non-ferrous Metals (aluminum, magnesium, copper, nickel, titanium) ,c) Plastics (thermoplastics, thermosets) ,d) Ceramics and Diamond,e) Composite Materials & f) Nano-materials.
undamentals of Crystal Structure: BCC, FCC and HCP Structures, coordination number and atomic packing factors, crystal imperfections -point line and surface imperfections. Atomic Diffusion: Phenomenon, Fick’s laws of diffusion, factors affecting diffusion.
Study Notes - Power Engineering 4th Class - Basic Properties of Engineering M...Steven Belaire
My study notes on Power Engineering - 4th Class Unit 10 Chapter 46 - Basic Properties of Engineering Materials, as taught in Alberta (SAIT, NAIT, BCIT and other technical colleges)
Illustration and detailed Analysis on the Structure and Applications of Metal...Cyril John
Next Generation Material produced by enhancing Aluminium element manufacturing process.Astonishing Application in Space Aircraft manufacturing that in a way encourages Space Exploration and provides a glance of what Human race can achieve.
Metals and alloys for prosthodontics/ dental education in indiaIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training
center with best faculty and flexible training programs for dental
professionals who wish to advance in their dental practice,Offers certified
courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry,
Prosthetic Dentistry, Periodontics and General Dentistry.
undamentals of Crystal Structure: BCC, FCC and HCP Structures, coordination number and atomic packing factors, crystal imperfections -point line and surface imperfections. Atomic Diffusion: Phenomenon, Fick’s laws of diffusion, factors affecting diffusion.
Study Notes - Power Engineering 4th Class - Basic Properties of Engineering M...Steven Belaire
My study notes on Power Engineering - 4th Class Unit 10 Chapter 46 - Basic Properties of Engineering Materials, as taught in Alberta (SAIT, NAIT, BCIT and other technical colleges)
Illustration and detailed Analysis on the Structure and Applications of Metal...Cyril John
Next Generation Material produced by enhancing Aluminium element manufacturing process.Astonishing Application in Space Aircraft manufacturing that in a way encourages Space Exploration and provides a glance of what Human race can achieve.
Metals and alloys for prosthodontics/ dental education in indiaIndian dental academy
Indian Dental Academy: will be one of the most relevant and exciting training
center with best faculty and flexible training programs for dental
professionals who wish to advance in their dental practice,Offers certified
courses in Dental implants,Orthodontics,Endodontics,Cosmetic Dentistry,
Prosthetic Dentistry, Periodontics and General Dentistry.
This lecture note is designed to technical school students and for university which study manufacturing/mechanical streams it helps to understand the basic for material testing.
Introduction to Mechanical Engineering Sciences --- KTUDr. Rejeesh C R
BE 101-2 -- Introduction to Mechanical Engineering Sciences
Module VI -- Manufacturing Engineering & Materials -- APJ Abdul kalam Technological University --- KTU
Subject Name: Testing of Materials (TOM)
Subject code: OML751
Unit I: Introduction to Materials Testing
B.E. Mechanical Engineering
Final year, VII Semester.
Open Elective Subject
[As per Anna university syllabus; R-2017]
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Adversarial Attention Modeling for Multi-dimensional Emotion Regression.pdf
An overview to the science of materials.
1. An Overview To The
Science of Materials
Presented by –
W. Andrew Nallayan
Associate Professor
Department of Mechanical Engineering
Dr.M.G.R. Educational & Research Institute
2. To be Covered…
● Objectives of Materials
● Material science & Fundamentals
● Evolution of Materials & Three Age System
● Material Classification
● Failure Analysis
● Engineering Disasters
● Plastics …The Good..Bad….and Ugly
● Career in materials
3. Objective – Material Science
To Understand the Properties and Behavior of
▪ Metals
▪ Polymers (Plastics)
▪ Ceramics
▪ Semiconductors
▪ Composites
4. Material Science
The central concept in Materials Science and
Engineering is that the properties and behavior of every
material is dependant on its microstructure, and that
microstructure can be controlled by the way in which the
material is made and processed.
Structure – How the atoms fit together..?
For crystalline materials, then this involves the size
and shape of the crystals (usually called Grains)
5. Fundamental of Material Science
Material science is the investigation of the relationship
among the “components” i.e., Processing, Structure,
Properties & Performance of the materials
11. Steel Age
Second Steel Age 1876 – 1926
➢ Great impact on Industrial Revolution
➢ Construction of Rail Roads
Problem: Due to unproven structure steel production
was slow and costly
“Carbon content in molten iron”
Solution: Henry Bessemer – 1856 – now called as
Bessemer process – Effective way to introduce oxygen
into molten iron – To reduce the carbon content/
12. Steel Age
Second Steel Age 1876 – 1926
Other Revolutions
1876 – France 1906 – Portsmouth
13. The Development of materials over time. The materials of pre-history, on the
left, all occur naturally; the challenge for the engineers of that era was one of
shaping them. The development of thermo chemistry and (later) of polymer
chemistry enabled man-made materials, shown in the colored zones. Three—
stone, bronze and iron—were of such importance that the era of their
dominance is named after them.
18. Smart Material - Piezoelectric
➢ On applying a
mechanical stress
to these materials it
generates an
electric current.
➢ Piezoelectric
microphones
transform changes
in pressure caused
by sound waves
into an electrical
signal.
19. Smart Material – Shape Memory
➢ After deformation -
materials they
remember their original
shape - return back to
its original shape when
heated.
➢ Applications include
shape memory “stents -
tubes threaded into
arteries” that expand on
heating to body
temperature to allow
increased blood flow.
20. Smart Material – Thermo chromic
➢ These are the
materials which change
their color in response
to changes in
temperature.
➢ They have been used
in “bathplugs that
change color when the
water is to hot” or
“Sensing Temperature
in Coffee cups”
21. Smart Material – Photo
chromic
These
materials
change color
in response to
changes in
light
conditions.
22. Smart Materials – Magneto
rheological
➢It is a fluid
➢ Fluids become solid
when placed in a
magnetic field.
➢These can be used for
buildings and bridges to
suppress the damaging
effects.
➢For example, high
winds or earthquakes
23. Nanoengineered Materials –
Medical Applications
● Polymeric micelle Nanoparticles - drugs to tumors
● Carbon Nanoparticles called Nanodiamonds
● For example: Protein molecules can be attached to nanodiamonds -
increase bone growth around joint or dental implants.
● Chemotherapy drugs attached to nanodiamonds - tested for brain
tumor treatment, and some researchers are looking to use the same to
treat leukemia.
24. Alloys
Alloy is a mixture of two or more elements
with a certain fixed composition in which the
major component is metal
Aim:
▪ To increase the Hardness and strength of the
metal
▪ To prevent corrosion or Rusting
▪ To improve the appearance of the metal surface
25. Properties of Alloys, Composition & Uses
Alloys Composition Properties Uses
Bronze • 90% Copper
• 10% Tin
✓ Heat & strong
✓ Does not corrode
easily
✓ Has shiny Surface
✓ Statues and monuments
✓ Medal swards &
artistic materials
Brass • 70% Copper
• 30% Zinc
✓ Harder than copper ✓ Musical instruments &
Kitchen wares
Steel • 99% Iron
• 1% Carbon
✓ Hard & Strong ✓ Construction of
buildings & bridges
Stainless Steel • 74% Iron
• 8% Carbon
• 18% Chromium
✓ Shiny
✓ Strong
✓ Doesn’t rust
✓ Surgical Instruments
Duralumin • 93% Aluminium
• 3% Copper
• 3% Magnesium
• 1% Manganese
✓ Light
✓ Strong
✓ Body of Aero planes &
Bullet trains
Pewter • 96% Tin
• 3% Copper
• 1% Antimony
✓ Luster
✓ Shiny
✓ Strong
✓ Making of souvenirs
27. Failure Analysis
A Systematic approach and investigation to determine the
most probable causes of failure
When to consider a failure…?
In general, an engineering component or
assembly is considered to have failed under the
following three conditions when the component
is
– Inoperable,
– Operates but doesn’t perform the intended
function
– Operates but safety and reliability is very poor
28. Failure of mechanical components
Failure of a mechanical component can occur in
many ways
– Elastic deformation is beyond acceptable limit
– Excessive and unacceptable level of plastic
deformation
– Complete fracture and
– Loss of dimension due to variety of reasons.
29. Fundamental causes of failure
The failure of an engineering component in
actual working conditions can occur due to
very large of factors related with
– design
– Materials
– manufacturing
– service conditions etc…
30. Need to know causes of failure
– Improper design
– Improper selection of materials
– Defects and discontinuities in metal itself
– Improper processing of materials
– Poor service conditions
– Poor assembling
– Poor maintenance
31. Major Engineering Disaster
➢ Titanic Ship – 1912
➢ St. Francis Dam Flooding – 1928
➢ Tacoma Narrow Bridge Collapse – 1940
➢ Bhopal Gas Tragedy - 1984
➢ Chernobyl Disaster – 1986
➢ Space Shuttle Columbia Disaster – 2003
32. Titanic Ship - 1912
● On April 14, 1912,
Passenger ship (R.M.S.
Titanic) that sank in less
than 3 hours after
collided with the massive
ice berg from
Southampton (UK) to
New York city. ● More than 2200 passengers
and crew were aboard the
Titanic - more than 1500 lost
their lives
33. Engineering Failure - Material
Several Rivets of the 3 million Rivets -
recovered and tested- found – Manufactured -
low quality iron which on “impact” caused
them to fall apart (Breakage)
Example:
“Impact Resistance” (iron) – low-
Charpy Impact test
34. Causes & Reasons
● Metallurgists Tim
Foecke and Jennifer
Hooper McCarty -
investigated - materials
- building of the
Titanic - Belfast
shipyard – found -
steel plates toward the
bow and the stern were
held together - low -
grade iron rivets.
35. Reason For the Cause
✓ Higher-grade rivets
may be in short
supply
✓ The better rivets
couldn't be inserted
in those areas using
the shipyard
crane-mounted
hydraulic equipment.
✓ The metallurgists said -
low-grade rivets - ripped
- more easily during the
collision causing - ship to
sink more quickly that it
would have if stronger
rivets had been used.
36. Engineering Failure - Design
Water tight
Compartments:
Sections with
intervening water tight
partitions into which the
interior of the large ship
is usually divided for
safety
➢ 16 water tight compartment
that kept the boat a float -
were not individually sealed -
rather connected near ceiling
- this enabled water to spill -
one compartment to another -
sink the ship
37. Bhopal Gas Tragedy - 1984
Disaster -World worst
Industrial Catastrophes
– December 2-3, 1984 –
Union carbide India
limited (UCIL)
Pesticide plant in
Bhopal, Madhya
Pradesh, India.
● Problem – Leak of Methyl
Isocyanate Gas & other
chemicals
● Immediate death – 2,259
● Later Madhya Pradesh
government confirmed 3,787
deaths related to gas release
38. Bhopal Gas Tragedy - UCIL
● Union Carbide India Limited started in 1969
● Manufacturers of –
Phosgene
Monomethlyamine
Methyl Isocyanate &
Pesticides of carbaryl (also known as
Sevin)
39. Leakage of Gas - UCIL
● Entry of Water into the Tank E610 containing 40 tons of
Methyl Isocyanate at 5 Psi
● Resulting in Exothermic Reaction - increased the pressure
from 5 Psi - 40 Psi - Methyl Isocyanate - leak into the
atmosphere
● Atmosphere – weak wind – weak Turbulence – cause slow
dilution of Gas which spreaded widely
41. Factors – Gas Leak
● Storing Methyl Isocyanate in large tanks & filling beyond the
recommended levels
● Flare tower & several vent gas scrubbers – out of service for 5
month before the disaster
● Failure of several saftey system & available saftey system –
switched off to save money
● Methyl Isocyanate tank refrigeration was kept at 20 degree
Celsius instead of 4.5 degree celsius as directed by the manual
● Only 1 back up system was present instead of 4 back up
system which has been used by an USA plant
45. Cause
● Space Shuttle Wings -
Subjected - more heat
● Protection - Reinforced
Carbon Panel
46. Plastics & RIC
Material consisting of any of a wide range of
synthetic or semi-synthetic organic compounds that are
malleable and so can be molded into solid objects
RIC – Resin Identification Code:
The “ASTM International Resin Identification
Coding System” - abbreviated as the RIC, is a set of
symbols appearing on plastic products - identify the
plastic resin out of which the product is made
Developed originally by the Society of the Plastics
Industry (Now the Plastics Industry Association) – 1988 -
administered by ASTM International since 2008
48. You ought to know!!
▪ Did you Know there are7 types of plastics?
▪ Did you know that each plastic type is
assigned a number?
▪ Did you know that only some varieties of
plastics are recyclable?
49. Plastic Type - 1: PETE
Polyethylene Terephthalate
This variety of plastic
is widely used in
disposable water bottles.
It is safe to use as long as it
is disposed of within a
short period of time. This is
because it often attracts
bacteria. This plastic type is
recyclable.
50. Plastic Type - 2: HDPE
High-density
Polyethylene - The
plastic used in milk
jugs, juice bottles and
detergent bottles.
Products made of this
plastic are opaque in
color. This plastic type
is recyclable.
HDPE
51. Plastic Type - 3: PVC
Polyvinyl Chloride - This plastic
type is durable and used to manufacture
pipes, food wraps and bottles that store
various types of oil. This plastic type is
not recyclable.
52. Plastic Type - 4: LDPE
Low-density polyethylene - LDPE
is safe for human use but not exactly
recyclable. It is used to manufacture
grocery bags and a variety of bottles.
53. Plastic Type - 5: PP
Polypropylene - Medicine bottles,
straws and a variety of cups are made
of polypropylene. It is safe and
recyclable.
54. Plastic Type - 6: PS
Polystyrene - Disposable cups, plates and
containers are made of polystyrene. This type of
plastic is considered to feature toxic chemicals and
shouldn't be used too often. This type of plastic is
not recyclable.
55. Plastic Type - 7: PETE
BPA, Polycarbonate
- Difficult to recycle, this
plastic type is
unpredictable. It is used in
a variety of items, from
DVDs and iPods to
sports and medical
equipment. There is no
guarantee about the safety
aspect of this plastic type.
56. YOU could HELP – Laying
Roads a) collecting waste plastics,
including plastic carry bags,
cups, soft and hard foams and
laminated plastics;
b) cleaning it by washing;
c) shredding it to a uniform
size;
d) melting the waste plastics
at temperature of 165 degree
Celsius and blending it with
hot aggregates and bitumen
and using this mixture to lay
the road.
57.
58. When did plastics become so
popular?
Post-war boom in
plastics
production
65. ChrisJordan
100 billion plastic bags get
used each year in the US.
ACUTAL SIZE
100,000,000,000
This is an artist’s visualization of what gets used in just five seconds
74. NORTH PACIFIC GYRE
•A massive current system that circulates plastic trash
•Twice the size of the continental US
•Plastic trash accumulates, but doesn’t biodegrade
89. Plastic in your sushi?
17 pieces of plastic in
the stomach of a fish
caught in the middle of
the Pacific.
90. Plastics Leach toxic chemicals
●Bisphenol A (BPA)
● Plastic hardener
● Used in DVDs, canned food lining,
baby bottles, water bottles
● Chemical found in 93% of
Americans over the age of 6
●Phthalates
● Plastic softener
● Found in toys, food packaging,
shower curtains, nail polish, hair
spray and shampoo, baby teething
rings
These Chemicals are
‘hormone mimickers’
that affect the Endocrine
System.
91. Plastic Bath
A study of 20 teens across America detected
16 chemicals from 4 chemical families including plastic
(phthalates) in their blood and urine.
Look up your products at SKIN DEEP
www.cosmeticsdatabase.com
96. REFUSE, REDUCE,
REUSE…
then RECYCLE
THINK TWICE
•Do you really need a bag for your bag of
chips?
•Ask the waiter to wrap in foil instead of
styrofoam
•Ask for “no straw”
•Don’t buy things with excess packaging
•Buy the can instead of the plastic bottle
•Shop at the local farmer’s markets
•Bring your own salsa/jam jar to parties. Its
free!
97. Encourage “Extended Producer
Responsibility” (EPR)
● Companies that make and package products are held
responsible for the end life of these products - collection
and disposal.
● EPR Motivates producers to reduce the waste they
produce, and make products more recyclable.
• Adopted by Germany in 1991
• Packaging waste reduced by 14%
in first four years
• Recycling rose to 75%!
98. Spread the Word…with a
SMILE
Share what you’ve learned
• Lead by example
• Ask your friends and family
to join you
• Speak to city council
• Write letters to government
officials
• Get your school involved
• And come to the Plastics Are
Forever Youth summit in
2011!
99. Career in Materials
Materials science and
engineering graduates are
employed in a range of
sectors, including:
• Aerospace
• Armed forces and Defense
• Automotive
• Manufacturing
• Nuclear industry
• Oil and gas
• Pharmaceuticals
• Telecommunications
100. Career in Materials - Qualifications
Apart from a degree in materials engineering, technology or
science, a number of other engineering and science-based subjects
are acceptable for entry to this profession, including:
● Applied chemistry
● Applied physics
● Ceramics and glass
● Chemical engineering
● Chemistry
● Mechanical engineering
● Metallurgy
● Minerals/mining engineering
● Geology
● Physics
● Polymer science/technology
● Structural engineering.