Since around 1990 the M9, 9mm pistol has been the United States armed services choice for side arms. This presentation is an overview of the M9 and also a basic primer on pistol marksmanship.
The document outlines range safety procedures and organization for a shooting range. It details four cardinal rules of gun safety: treat every gun as if it's loaded, never point the gun at anything you don't intend to shoot, be sure of your target and what is beyond it, and keep your finger off the trigger until ready to shoot. It then describes the various personnel and their duties needed to safely operate the range, including the range safety officer, ammunition detail, and medical personnel. Finally, it outlines the safety briefing and inspection procedures to ensure safe firing.
The document discusses the fundamentals of pistol marksmanship training. It covers the four cardinal rules of gun safety, the triad of marksmanship involving the personal, equipment, and environment factors, and the five fundamentals of grip, stance, aiming, breath control, and trigger press. Mastering these concepts is key to enhancing one's skills in pistol shooting safely and accurately.
Gun safety is a set of rules and recommendations for safely possessing, storing, and handling firearms to minimize accidental injury or damage. The rules include: treating all firearms as if they are loaded, keeping the muzzle pointed in a safe direction, keeping fingers off the trigger until ready to shoot, and knowing the target and what lies beyond it. Firearms not in use should be securely stored unloaded in a locked safe or container, with ammunition stored separately. Proper handling and storage can help prevent accidental discharge and ensure safety.
This presentation covers the knots used in firefighting & rescue. Includes basic description of the knot and it’s use, advantages, disadvantages, video of the knots being tied. Shows how to tie 19 knots. Most with video on how to tie the knots. Presentation is over 80 slides in length.
The document provides guidelines for safe firearms handling from several organizations. It lists the National Rifle Association's gun safety rules of always keeping the gun pointed in a safe direction, keeping fingers off the trigger until ready to shoot, and keeping guns unloaded until use. It also lists Colonel Cooper's four rules of always assuming guns are loaded, never pointing the muzzle at anything you don't intend to shoot, keeping fingers off the trigger until on target, and being sure of the target and beyond. The document emphasizes always keeping the firearm pointed in a safe direction, unloading firearms when not in use, and being sure the barrel is clear of obstructions before shooting.
The document discusses key aspects of an effective fire prevention program, including life safety, property protection, and continuity of operations as primary goals. It describes the fire triangle of fuel, heat, and oxygen and strategies to control or isolate these elements. The document provides guidelines for good housekeeping, safe storage of flammables and combustibles, and identifies electrical hazards. It emphasizes the importance of compartmentalization through proper maintenance of fire barriers such as walls, doors, and dampers.
This document provides guidelines for safe gun handling and use at a firing range. It outlines 4 fundamental rules of gun safety: always treat every gun as if it is loaded, keep the muzzle pointed in a safe direction, keep your finger off the trigger until ready to shoot, and know your target and what lies beyond. The document also details proper storage, cleaning, use of eye and ear protection, and range safety procedures such as only handling guns at the firing line and announcing when firing.
The document outlines range safety procedures and organization for a shooting range. It details four cardinal rules of gun safety: treat every gun as if it's loaded, never point the gun at anything you don't intend to shoot, be sure of your target and what is beyond it, and keep your finger off the trigger until ready to shoot. It then describes the various personnel and their duties needed to safely operate the range, including the range safety officer, ammunition detail, and medical personnel. Finally, it outlines the safety briefing and inspection procedures to ensure safe firing.
The document discusses the fundamentals of pistol marksmanship training. It covers the four cardinal rules of gun safety, the triad of marksmanship involving the personal, equipment, and environment factors, and the five fundamentals of grip, stance, aiming, breath control, and trigger press. Mastering these concepts is key to enhancing one's skills in pistol shooting safely and accurately.
Gun safety is a set of rules and recommendations for safely possessing, storing, and handling firearms to minimize accidental injury or damage. The rules include: treating all firearms as if they are loaded, keeping the muzzle pointed in a safe direction, keeping fingers off the trigger until ready to shoot, and knowing the target and what lies beyond it. Firearms not in use should be securely stored unloaded in a locked safe or container, with ammunition stored separately. Proper handling and storage can help prevent accidental discharge and ensure safety.
This presentation covers the knots used in firefighting & rescue. Includes basic description of the knot and it’s use, advantages, disadvantages, video of the knots being tied. Shows how to tie 19 knots. Most with video on how to tie the knots. Presentation is over 80 slides in length.
The document provides guidelines for safe firearms handling from several organizations. It lists the National Rifle Association's gun safety rules of always keeping the gun pointed in a safe direction, keeping fingers off the trigger until ready to shoot, and keeping guns unloaded until use. It also lists Colonel Cooper's four rules of always assuming guns are loaded, never pointing the muzzle at anything you don't intend to shoot, keeping fingers off the trigger until on target, and being sure of the target and beyond. The document emphasizes always keeping the firearm pointed in a safe direction, unloading firearms when not in use, and being sure the barrel is clear of obstructions before shooting.
The document discusses key aspects of an effective fire prevention program, including life safety, property protection, and continuity of operations as primary goals. It describes the fire triangle of fuel, heat, and oxygen and strategies to control or isolate these elements. The document provides guidelines for good housekeeping, safe storage of flammables and combustibles, and identifies electrical hazards. It emphasizes the importance of compartmentalization through proper maintenance of fire barriers such as walls, doors, and dampers.
This document provides guidelines for safe gun handling and use at a firing range. It outlines 4 fundamental rules of gun safety: always treat every gun as if it is loaded, keep the muzzle pointed in a safe direction, keep your finger off the trigger until ready to shoot, and know your target and what lies beyond. The document also details proper storage, cleaning, use of eye and ear protection, and range safety procedures such as only handling guns at the firing line and announcing when firing.
The document provides emergency evacuation procedures for The Royale Chulan hotel in Kuala Lumpur. It outlines that in the event of an emergency, there are two nearest emergency exits from the floor - the main entrance and a staff entrance at the loading bay area. It instructs that when the first alarm sounds, to remain alert, and when the second continuous alarm is accompanied by a PA announcement, to immediately leave the floor via the closest exit and proceed to the emergency exits on the left and right. Evacuees are directed to the assembly area in front of the hotel near Jalan Conlay and not to use the lifts or re-enter the building until instructed it is safe.
Security guards are expected to respond effectively to emergency situations such as fires, bombs, or medical emergencies. They should be familiar with their employer's emergency response procedures and know their role. Security guards may be responsible for detecting emergencies, notifying authorities, evacuating premises, and securing scenes. It is important for security guards to receive training on potential emergencies and how to minimize damage through preparedness and an organized response.
This document outlines the cardinal rules of gun safety: always treat firearms as if they are loaded, never point the muzzle of a firearm at anything you are not willing to destroy, never put your finger on the trigger until ready to fire, and always be sure of your target and what is behind and in front of it. Following these rules can help minimize accidental injury from improper handling of firearms.
The document provides guidance on close quarters battle and room clearing techniques for SWAT teams. It discusses principles like surprise, speed, and violence of action. It outlines procedures for stacking at the entry point, breaching doors, entering and clearing rooms, communicating status updates, handling unknown individuals, and rehearsing tactics. Key rules include never clearing alone, maintaining muzzle awareness, and not stopping movement or scanning until the room is fully cleared.
This document provides an overview of safety rules and regulations for a construction site. It contains 3 main points:
1. It introduces the need for a safety induction course to inform new workers of in-house safety rules and provides site-specific information like location maps and layout plans.
2. It outlines various safety measures that will be provided like training, equipment, and goals to prevent injuries and property damage. Basic PPE requirements are also described.
3. It details many specific safety procedures and hazards related to tasks like working at heights, excavations, lifting, welding, electricity, and more. Proper protocol is emphasized for reporting issues, emergencies, and following supervisors' instructions.
Bomb Threat Its Detection & PreventionSunjib Anwar
Bomb threats and detection of improvised explosive devices (IEDs) are serious security concerns. Employees should be aware of bomb threats and take detection and prevention measures to minimize damage and loss of life. Key actions include: recognizing suspicious objects and evacuating the area; never touching suspicious objects; following bomb threat protocols like keeping callers on the phone; and implementing security measures like barriers, perimeter controls, and package inspection to deter and detect threats. If a bomb detonates, remaining alert for secondary explosions, controlling panic, evacuating safely, and cordoning off the area are critical response steps.
This document outlines OSHA regulations regarding fall protection in construction workplaces. It discusses requirements for fall protection systems to prevent falls from unprotected sides/edges, holes, excavations, ramps/walkways, dangerous equipment, and other surfaces over 6 feet high. Fall protection such as guardrails, safety nets, covers or personal fall arrest systems must be used. The document also provides definitions for terms related to fall protection equipment and systems.
This document provides an overview of industrial security management. It discusses physical security, personnel security, documentation security, risk analysis, and legal bases for industrial security in the Philippines. It focuses on physical security measures, including perimeter barriers like fences, lighting, and protective alarms. It describes different types of barriers, lighting equipment and lamps, and alarm detection systems that can be used to detect and deter security threats on industrial sites.
The document discusses the key roles and responsibilities of security guards and supervisors. It outlines that security guards are responsible for protecting premises and occupants from theft, crime, fires and emergencies through surveillance and responding to risks. They must maintain good conduct and be physically fit. Security supervisors oversee security guards and ensure safety procedures are followed. Both roles require skills like effective communication, emergency response, and crowd control.
If a fire is discovered, dial 911 for help and fight the fire if it is safe to do so. In case of a fire, remember to RACE: rescue those in danger, alert others and call 911, contain the fire by closing doors and windows, and extinguish or evacuate. When the fire alarm sounds, leave the building immediately and proceed to the safe assembly point without delay or collecting belongings. Use a fire extinguisher only if the fire is small by pulling the pin, aiming at the base of the fire, squeezing the handle, and sweeping side to side. Do not fight larger fires or those involving smoke, blocked exits, chemicals, or that are not being contained.
This document discusses knots and rope usage in firefighting. It covers the different types of ropes used - life safety ropes, escape ropes, and utility ropes. It describes various rope materials like synthetic fibers, wire ropes, and natural fibers. It discusses rope construction methods like twisted, braided, and kernmantle. The document provides details on inspecting, cleaning, caring for, and storing ropes. It explains different types of knots like loops, hitches, bends and provides instructions on tying knots like the bowline, clove hitch, figure eight, and prusik hitch. It also shows examples of hoisting tools and equipment using ropes and knots.
The document provides information on the 710th ASMC training plan concept and references for small arms training. It details the training that will be conducted on the M16/M4 rifle and M9 pistol, including classroom instruction, hands-on tasks, and live-fire ranges. The training will cover weapon components, maintenance, firing fundamentals, and qualification with assigned weapons.
The document provides guidance on safely using lifting equipment according to UK regulations. It summarizes the legal requirements, definitions, and general safety procedures. The key points covered include:
1. Responsibilities of manufacturers, suppliers, employers and employees in ensuring lifting equipment is safe and properly maintained.
2. Definitions of important terms related to lifting equipment and legal requirements.
3. An overview of UK regulations and standards covering the supply and safe use of lifting equipment.
1) In case of a fire, stay calm and follow evacuation procedures. Find the two closest exits, know where fire alarms and extinguishers are located, and be familiar with your building's evacuation plan.
2) If you discover a small fire, use a fire extinguisher by pulling the pin, aiming at the base of the fire, squeezing the handle, and sweeping side to side. For larger fires, close doors and activate the fire alarm to warn others before evacuating.
3) If trapped, seal doors and vents with wet cloth to hold back smoke, keep low where the air is cleaner, and signal for help from a window. Your safety during a fire depends on being
The document provides instructions and requirements for soldiers reporting to the Special Forces Assessment and Selection (SFAS) course at Fort Bragg. It outlines what to bring including proper uniforms, paperwork, and physical requirements. Soldiers must report to Building D-3915 with their gear and will be briefed on life in the holding barracks. The document emphasizes starting SFAS on the right foot by being physically and administratively prepared. A functioning Common Access Card with the proper certificates is also required.
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
This document discusses different types of carries that can be used to transport an injured or unconscious person. It lists several carries including the fireman's drag, fireman's carry, 4 man carry, and 6 man carry. These carries allow emergency responders or others to safely move an individual who needs assistance.
8. Principle of Fire Fighting 10-phases-of-fire.pptInNaRivera1
The document outlines 10 phases of fire operations:
1) Pre-fire planning to prepare for potential fires in buildings.
2) Sizing up when first responding to determine the situation and plan of action.
3) Rescue of any victims by locating, extracting, and providing medical assistance to them.
4) Cover exposure of uninvolved buildings to prevent fire spread.
This document outlines the objectives and content of a pistol training course presented by Warpig Combatives. The course covers safe handling, loading, firing, unloading, disassembling and assembling of pistols. It also discusses cleaning materials, safety guidelines, storage options, and hygiene practices when handling firearms. Additional training opportunities through the NRA and Warpig Combatives on self defense, combatives and protecting firearms are presented.
This document outlines the objectives and content of a pistol firearm instruction course. It details the course objectives which include identifying pistol components, safely loading and firing a pistol, and demonstrating proper handling. The document outlines range commands, procedures for malfunctions and dropped ammunition, eight safety rules for shooting and storage, proper shooting stances including isosceles and weaver positions. It concludes with a review of the lesson objectives.
The document provides emergency evacuation procedures for The Royale Chulan hotel in Kuala Lumpur. It outlines that in the event of an emergency, there are two nearest emergency exits from the floor - the main entrance and a staff entrance at the loading bay area. It instructs that when the first alarm sounds, to remain alert, and when the second continuous alarm is accompanied by a PA announcement, to immediately leave the floor via the closest exit and proceed to the emergency exits on the left and right. Evacuees are directed to the assembly area in front of the hotel near Jalan Conlay and not to use the lifts or re-enter the building until instructed it is safe.
Security guards are expected to respond effectively to emergency situations such as fires, bombs, or medical emergencies. They should be familiar with their employer's emergency response procedures and know their role. Security guards may be responsible for detecting emergencies, notifying authorities, evacuating premises, and securing scenes. It is important for security guards to receive training on potential emergencies and how to minimize damage through preparedness and an organized response.
This document outlines the cardinal rules of gun safety: always treat firearms as if they are loaded, never point the muzzle of a firearm at anything you are not willing to destroy, never put your finger on the trigger until ready to fire, and always be sure of your target and what is behind and in front of it. Following these rules can help minimize accidental injury from improper handling of firearms.
The document provides guidance on close quarters battle and room clearing techniques for SWAT teams. It discusses principles like surprise, speed, and violence of action. It outlines procedures for stacking at the entry point, breaching doors, entering and clearing rooms, communicating status updates, handling unknown individuals, and rehearsing tactics. Key rules include never clearing alone, maintaining muzzle awareness, and not stopping movement or scanning until the room is fully cleared.
This document provides an overview of safety rules and regulations for a construction site. It contains 3 main points:
1. It introduces the need for a safety induction course to inform new workers of in-house safety rules and provides site-specific information like location maps and layout plans.
2. It outlines various safety measures that will be provided like training, equipment, and goals to prevent injuries and property damage. Basic PPE requirements are also described.
3. It details many specific safety procedures and hazards related to tasks like working at heights, excavations, lifting, welding, electricity, and more. Proper protocol is emphasized for reporting issues, emergencies, and following supervisors' instructions.
Bomb Threat Its Detection & PreventionSunjib Anwar
Bomb threats and detection of improvised explosive devices (IEDs) are serious security concerns. Employees should be aware of bomb threats and take detection and prevention measures to minimize damage and loss of life. Key actions include: recognizing suspicious objects and evacuating the area; never touching suspicious objects; following bomb threat protocols like keeping callers on the phone; and implementing security measures like barriers, perimeter controls, and package inspection to deter and detect threats. If a bomb detonates, remaining alert for secondary explosions, controlling panic, evacuating safely, and cordoning off the area are critical response steps.
This document outlines OSHA regulations regarding fall protection in construction workplaces. It discusses requirements for fall protection systems to prevent falls from unprotected sides/edges, holes, excavations, ramps/walkways, dangerous equipment, and other surfaces over 6 feet high. Fall protection such as guardrails, safety nets, covers or personal fall arrest systems must be used. The document also provides definitions for terms related to fall protection equipment and systems.
This document provides an overview of industrial security management. It discusses physical security, personnel security, documentation security, risk analysis, and legal bases for industrial security in the Philippines. It focuses on physical security measures, including perimeter barriers like fences, lighting, and protective alarms. It describes different types of barriers, lighting equipment and lamps, and alarm detection systems that can be used to detect and deter security threats on industrial sites.
The document discusses the key roles and responsibilities of security guards and supervisors. It outlines that security guards are responsible for protecting premises and occupants from theft, crime, fires and emergencies through surveillance and responding to risks. They must maintain good conduct and be physically fit. Security supervisors oversee security guards and ensure safety procedures are followed. Both roles require skills like effective communication, emergency response, and crowd control.
If a fire is discovered, dial 911 for help and fight the fire if it is safe to do so. In case of a fire, remember to RACE: rescue those in danger, alert others and call 911, contain the fire by closing doors and windows, and extinguish or evacuate. When the fire alarm sounds, leave the building immediately and proceed to the safe assembly point without delay or collecting belongings. Use a fire extinguisher only if the fire is small by pulling the pin, aiming at the base of the fire, squeezing the handle, and sweeping side to side. Do not fight larger fires or those involving smoke, blocked exits, chemicals, or that are not being contained.
This document discusses knots and rope usage in firefighting. It covers the different types of ropes used - life safety ropes, escape ropes, and utility ropes. It describes various rope materials like synthetic fibers, wire ropes, and natural fibers. It discusses rope construction methods like twisted, braided, and kernmantle. The document provides details on inspecting, cleaning, caring for, and storing ropes. It explains different types of knots like loops, hitches, bends and provides instructions on tying knots like the bowline, clove hitch, figure eight, and prusik hitch. It also shows examples of hoisting tools and equipment using ropes and knots.
The document provides information on the 710th ASMC training plan concept and references for small arms training. It details the training that will be conducted on the M16/M4 rifle and M9 pistol, including classroom instruction, hands-on tasks, and live-fire ranges. The training will cover weapon components, maintenance, firing fundamentals, and qualification with assigned weapons.
The document provides guidance on safely using lifting equipment according to UK regulations. It summarizes the legal requirements, definitions, and general safety procedures. The key points covered include:
1. Responsibilities of manufacturers, suppliers, employers and employees in ensuring lifting equipment is safe and properly maintained.
2. Definitions of important terms related to lifting equipment and legal requirements.
3. An overview of UK regulations and standards covering the supply and safe use of lifting equipment.
1) In case of a fire, stay calm and follow evacuation procedures. Find the two closest exits, know where fire alarms and extinguishers are located, and be familiar with your building's evacuation plan.
2) If you discover a small fire, use a fire extinguisher by pulling the pin, aiming at the base of the fire, squeezing the handle, and sweeping side to side. For larger fires, close doors and activate the fire alarm to warn others before evacuating.
3) If trapped, seal doors and vents with wet cloth to hold back smoke, keep low where the air is cleaner, and signal for help from a window. Your safety during a fire depends on being
The document provides instructions and requirements for soldiers reporting to the Special Forces Assessment and Selection (SFAS) course at Fort Bragg. It outlines what to bring including proper uniforms, paperwork, and physical requirements. Soldiers must report to Building D-3915 with their gear and will be briefed on life in the holding barracks. The document emphasizes starting SFAS on the right foot by being physically and administratively prepared. A functioning Common Access Card with the proper certificates is also required.
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
This document discusses different types of carries that can be used to transport an injured or unconscious person. It lists several carries including the fireman's drag, fireman's carry, 4 man carry, and 6 man carry. These carries allow emergency responders or others to safely move an individual who needs assistance.
8. Principle of Fire Fighting 10-phases-of-fire.pptInNaRivera1
The document outlines 10 phases of fire operations:
1) Pre-fire planning to prepare for potential fires in buildings.
2) Sizing up when first responding to determine the situation and plan of action.
3) Rescue of any victims by locating, extracting, and providing medical assistance to them.
4) Cover exposure of uninvolved buildings to prevent fire spread.
This document outlines the objectives and content of a pistol training course presented by Warpig Combatives. The course covers safe handling, loading, firing, unloading, disassembling and assembling of pistols. It also discusses cleaning materials, safety guidelines, storage options, and hygiene practices when handling firearms. Additional training opportunities through the NRA and Warpig Combatives on self defense, combatives and protecting firearms are presented.
This document outlines the objectives and content of a pistol firearm instruction course. It details the course objectives which include identifying pistol components, safely loading and firing a pistol, and demonstrating proper handling. The document outlines range commands, procedures for malfunctions and dropped ammunition, eight safety rules for shooting and storage, proper shooting stances including isosceles and weaver positions. It concludes with a review of the lesson objectives.
This document outlines the objectives and content of a pistol firearm instruction course. The course covers safe gun handling rules, pistol components and operation, identifying proper ammunition, addressing ammunition malfunctions, determining dominant eye, and demonstrating proper shooting stance and grip. Specific topics include ammunition types, parts, malfunction types, sight alignment, breath and trigger control fundamentals. The overall goal is to teach firearm responsibility, safety and basic pistol skills.
Detective Privado - Detctive Privado Argentina on SrinvestigadorGig Fivers
Srinvestigador is a private investigation firm located in Argentina that offers various detective services including conducting investigations into infidelity, theft, corporate espionage, fraud, and gathering background information. The firm uses advanced equipment to capture reliable data covertly, and sells surveillance products like audio recorders and keyloggers. Srinvestigador claims to have vast experience and ensures discretion, confidentiality, accountability and efficiency for each case.
A presentation I designed about the Glock 17 Pistol, a product I knew very little about but discovered that it was supposed to be the most innovative pistol in modern times.
This document outlines the objectives and content of a pistol safety course. The course will teach students to safely handle, load, fire and unload different types of pistols, including revolvers and semi-automatic pistols. It will review the three basic firearm safety rules and identify the major components of pistols like the frame, barrel and action. The first lesson will focus on safety rules and pistol components.
This document outlines the NRA Basic Pistol Shooting Course. It introduces administrative policies, the course goal of teaching safe pistol ownership and use. It describes the responsibilities of gun owners and different types of pistols before focusing on the key safety rules around keeping firearms pointed in a safe direction, keeping fingers off the trigger, and keeping guns unloaded until ready to use. The document provides an overview of pistol parts and functioning to teach students.
O documento apresenta um plano de aulas para um curso de culinária, com 28 aulas abordando diversos tópicos como preparo de ervas, legumes, caldos, molhos, carnes, peixes, frutos do mar e sobremesas. Cada aula inclui a elaboração de fichas técnicas com receitas e procedimentos operacionais.
The document provides instructions for proper gun safety and handling. It outlines 4 main rules: 1) Treat every gun as if it is loaded, 2) Never point the gun at anything you do not intend to shoot, 3) Keep your finger off the trigger until ready to fire, and 4) Be sure of your target and what is beyond it. It also gives guidelines for range safety including always wearing eye and ear protection and only handling guns at the safety area. Proper stance, grip, sight alignment and trigger control are emphasized.
The document provides safety instructions and operating procedures for Mosin-Nagant rifles. It details how to safely handle, load, fire, unload and store the rifles. It also gives a brief history of Mosin-Nagant rifles, describes the parts and how to disassemble/clean the rifle. The document concludes by stating the manufacturer assumes no liability for improper use or handling of the rifles.
This document provides information on marksmanship training with the M16 rifle. It discusses how to mechanically zero the M16/A2, the proper steady firing position, breath control techniques for firing, supported and unsupported prone firing positions, procedures for remedial action in case of a stoppage, qualification standards for a record fire range, and the task and standards for zeroing an M16A2 rifle.
This document provides an overview of lesson two on self-defense firearms. It covers the four universal safety rules, how to clear different types of handguns, the different actions of handguns including revolvers, semi-automatics, and their firing mechanisms. It also discusses ammunition, common malfunctions, selecting the right firearm, and introduces home defense shotguns and the AR-15 platform. The key topics are treating all guns as loaded, never pointing at anything you don't intend to shoot, keeping your finger off the trigger until ready to fire, and being sure of your target and beyond.
Firearms safety: ten guidelines for proper weapons handlingmartien635
This is the most fundamental rule of defense. There would be almost no shooting incidents if anyone treated a weapon so carefully that the muzzle never pointed at anything they didn't want to shoot. It's as simple as that, and the option is yours.
Never point your gun at something you don't want to kill. When loading or unloading a weapon, this is especially important. As long as the muzzle is pointed in a safe direction, no damage will occur in the case of an accidental discharge.
The document provides information about the history of Glock and the features of the Glock 17 Gen4 pistol, including:
1) Glock was founded in 1963 in Austria and first introduced pistols in 1980 that were adopted by the Austrian military.
2) The Glock 17 Gen4 has interchangeable backstraps, an enlarged reversible magazine catch, and a rough textured frame. It has a 17 round magazine capacity.
3) Glock pistols have 3 independent safeties - a trigger safety, firing pin safety, and drop safety that prevent firing unless the trigger is pulled fully rearward.
This document provides an orientation for beginning pistol shooters. It outlines safety rules that prohibit live ammunition in the classroom and require keeping guns pointed in a safe direction and unloaded until ready to fire. The document reviews pistol parts for revolvers and semi-automatics, demonstrates proper shooting fundamentals like grip, stance, sight alignment, breath control, and follow through. It describes the firing range layout and safety rules, and outlines the process shooters will follow with an instructor at the firing point, starting with dry firing and then live firing with supervision.
The document provides instructions for safely operating and maintaining the SIG SG 550/551 SP semi-automatic assault rifle. It describes the various components of the weapon, including the barrel, receiver, bolt, trigger assembly, sights, magazine, and accessories. The document also provides step-by-step instructions for handling the weapon safely, such as loading, unloading, changing magazines, aiming and firing, cleaning, and making adjustments to the sights. Maintenance and safety procedures are emphasized throughout.
This document provides 10 safety precautions for handling firearms:
1. Treat every firearm as if it is loaded and do not rely entirely on safety mechanisms.
2. Unload your firearm when engaging in activities that could cause loss of balance, such as climbing trees.
3. Only load a firearm when ready to use it, and unload it immediately after use.
4. Always keep the muzzle pointed in a safe direction and check that a firearm is unloaded before handing it to someone.
5. Store firearms and ammunition separately in locked storage, keeping ammunition inaccessible to children.
6. Be absolutely sure of your target and what lies beyond it before firing.
7. Consider the range of
This document provides standardized procedures for USAF personnel to follow when handling small arms and light weapons, including loading, unloading, and clearing procedures. It outlines the specific steps to take for semi-automatic pistols, rifles, shotguns, grenade launchers, and machine guns. All personnel must use these procedures and handle weapons safely by keeping fingers off triggers and muzzles pointed in a safe direction during all handling.
The document provides instructions for mounting Tier One 17mm Dovetail Rings on a rifle. It instructs the user to place the unloaded firearm in a vice, loosen the ring clamp screws, and position the rear ring on the dovetail while avoiding interference with the bolt handle. It then describes positioning the front ring using the provided recoil arrestor pin if possible. Finally, it details adjusting the optic position for eye relief and leveling it side to side before tightening the ring screws.
This document provides safety instructions and operating instructions for the CZ 75 P-07 Duty pistol. It outlines 23 safety rules including always treating the pistol as if it is loaded, keeping it pointed in a safe direction, using proper ammunition, and storing it securely. It then describes the pistol's features and operation, including how to load, fire, and unload it safely. The document provides guidance on maintenance and cleaning of the pistol.
Similar to An Introduction To The M9 Pistol and Basic Pistol Marksmanship (12)
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
Assessment and Planning in Educational technology.pptxKavitha Krishnan
In an education system, it is understood that assessment is only for the students, but on the other hand, the Assessment of teachers is also an important aspect of the education system that ensures teachers are providing high-quality instruction to students. The assessment process can be used to provide feedback and support for professional development, to inform decisions about teacher retention or promotion, or to evaluate teacher effectiveness for accountability purposes.
How to Manage Your Lost Opportunities in Odoo 17 CRMCeline George
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
2. M9 Pistol BasicsM9 Pistol Basics PistolPistol
M9 Pistol is a 9-MM, semi-automatic, magazine
fed, recoil-operated, double-action gun.
The magazine holds up to 15 rounds.
3.
4. SAFETY FEATURESSAFETY FEATURES
• To prevent accidental discharge:
o De-cocking/safety lever
o Firing pin block
o Half-cock hammer notch
5. WARNINGWARNING
The half-cocked position catches the hammer and stopsThe half-cocked position catches the hammer and stops
your gun from firing if the hammer is released afteryour gun from firing if the hammer is released after
manually cocking your gun. The half-cocked position ismanually cocking your gun. The half-cocked position is
NOT considered a safety position as if you pull theNOT considered a safety position as if you pull the
trigger from the half-cocked position the M9 will fire.trigger from the half-cocked position the M9 will fire.
6. FUNDAMENTALSFUNDAMENTALS
• Engaging the enemy closely with quick and accurate
fire is the main purpose for a pistol. Knowing how to
accurately shoot can only be accomplished by
knowing and using the fundamentals of
marksmanship.
7. THE ELEMENTS OF COMBATTHE ELEMENTS OF COMBAT
PISTOL MARKSMANSHIPPISTOL MARKSMANSHIP
• Proper Grip
• Aiming
• Breath control
• Trigger squeeze
• Target engagement
• Shooting Positions
8. GRIPGRIP
Your Pistol should be thought of as an extension of your
hand and arm. Using your finger to point at an object
is a good analogy.
9. ONE-HAND GRIPONE-HAND GRIP
Hold the pistol in the non-firing hand and with the
firing hand form a V with the thumb and forefinger.
Place the pistol in the V and wrap the firing hand
around the pistol. Grip the pistol tightly until you begin
to tremble; relax until the trembling has stopped. At
this point, the necessary pressure for a proper grip is
being applied.
10.
11. FIST GRIPFIST GRIP
Grip the pistol with the one-hand grip; close the
fingers of the non-firing hand over the fingers of
the firing hand. You should make sure that the
index finger of the non-firing hand is between
the middle finger of the firing hand and the
trigger guard. Place the thumb of the non-firing
hand alongside the thumb of the firing hand.
18. 1. Grip the gun properly and at arms length.
2. The front sight post needs to be visually aligned with the rear sight post. The top of the two
site posts need to be on the same level.
3. The gap of light between the sides of the front sight and inside vertical edge of the rear
notch should be equal.
4. After the sites are aligned, you then aim where you want to shoot and fire away!
Aiming Steps