This document is a curriculum vitae for Eng. Ahmad Ibrahim Naser that outlines his personal details, education, qualifications, languages, and 21 years of experience in maintenance, construction, and quality control in the oil and gas sector. It provides details on 7 different roles he has held between 1992 and 2014 with companies in Syria, Iraq, England, Malaysia, and China, describing his responsibilities and duties in quality assurance, quality control, piping, fabrication, and maintenance.

1. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
Ahmad Ibrahim Naser
Homs, Syria
Mob: +963-944-871587
+963-31-2764281 (Syria)
E-mail: engnas@gmail.com
Personal Data
Date of Birth : 4th
January, 1968
Nationality : Syrian
Marital Status : Married
Education
Bachelor of Science in Mechanical Engineering – Power Department
- Awarded date: 1992.
- Name of University: Aleppo University-Faculty of Mechanical & Electrical Engineering.
Professional Qualification & Training courses
-CSWIP 3.1 from the Welding Institute – Certificate No. 33014/2
Expiry Date 9 March2018
Language
•Arabic: Mother Tongue.
•English : Very Good
Experience Summary:
I have 21 years of experience in Static Equipment Maintenance, Construction and Quality Control in Oil
and GAS sector working in leading EPC, Client and contractor companies.
Page 1 of 7

2. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
Job Description
• Cover Visual, Radiographic, Dye Penetrant, Magnetic Particle, Ultrasonic, Hardness Leak
(Pressure, Vacuum, & Hydro testing) Test.
• Preparation & approval of WPS supporting with PQR.
• Welder Performance Qualification (WPQ).
• Non destructive test (NDT)
• Material Receiving Report (MRR) according to Material take-off list (MTO)
• Reviewing Procedures, method statement (MS), specification and standards for the project.
• Review and approving all procedure documents such as isometric drawings, shop
drawings, and as built drawings.
• Witnessing Pressure test on the valve, piping system...etc. as per approved procedure.
• Piping process fabrication & erection
• Flow line & pipelines welding, Lowering , HSS,…etc
• Welding Examination (before, during &after welding).
• Spool dimension identification.
• Release for hydrostatic & pneumatic test.
• Cleaning, Flushing &Drying for piping.
• Study and solve the erection problems and site design modifications during the work.
• Coordinate with other contractors.
Personal Experience
From august 2014 at jule 2015
:
Company : Alyamama engineering company contractor
With SIPD) SHELL IRAQ) MAJNON FIELD IRAQ
Position : QA/QC Engineer
• Review Plans and drawing in accordance with specification..
• Comparison of Mill Test Reports (MTRs) in accordance with relevant code.
• Preparation & approval of WPS supporting with PQR.
• Witnessing for welder performance Qualification(WPQ) & PQR
• Review of all fabricated activities to piping and pipeline as per drawing.
Page 2 of 7

3. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
• Inspection of all welding and coating activities at workshop and site.
• Visual inspection of welding joint.
• Monitoring of consumables to be used and ensure
that baking of special electrode as per Approved WPS & MS.
• Inspection of Fit – up as per WPS.
• Preparation of final documentations
From September, 2013 to august 2014
Company : WDRVM SYRIA
PROJECT : 2.5 MW wind turbine construction and installation design by aerodyn
German company
Position : QA/QC coordinator
• Review Plans and drawing in accordance with specification..
• Comparison of Mill Test Reports (MTRs) in accordance with relevant code.
• Carry out Daily jobs activities.
• Review of all fabricated activities of the tower as per drawing.
• Inspection of all welding and coating activities of tower at workshop.
• Visual inspection of welding joint.
• Witnessing of PWHT to Doorframe of tower as per WPS.
• Monitoring of consumables to be used and ensure that baking of special
electrode as per Approved WPS & MS.
• Inspection of Fit – up as per WPS.
• Preparation of final documentations
From June, 2012 at September 2012
Page 3 of 7

4. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
Company : SAIPEM –MlE PROJECT- ALGERIA
Position : QAQC Test Pack
From September, 2010 till june2012
Company : “DPS” (Dynamic Process Systems) Bristol / England – K.L / Malaysia
(AFPC contract)
Position : PIPING Engineer
.
• Project: Engineering Project, Duration 3 Years.
• Responsibilities: All piping activities of the project, which includes:
1. Prepare and carry out site survey.
2. Prepare marked-up and as-built drawings.
3. Prepare SSR (site survey report) including drawings related and site photos.
4. Prepare recommendations for designer.
.
From September 2009 up to September 2010
Company : SIPC (SINOPEC) OPC
A Leading company in Oil and Gas sector from China working in Syria with joint venture of
Syrian oil Gas Company
Location : Oudh Petroleum Company,
Position : QA/QC Coordinator, Welding Inspector
Duties
• Review Plans and drawing in accordance with specification.
Page 4 of 7

5. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
• Conduct inspection activities in accordance with Quality Assurance manual
and Quality Control Inspection Plan.
• Ensure that adequate precautions are taken to protect the works from weather
and other hazards during application.
• Comparison of Mill Test Reports (MTRs) in accordance with relevant code.
• Carry out Daily jobs activities after receiving RFI.
• Witnessing of WQT at work shop as per Approved WPS.
• Review of all fabricated activities of the piping process as per approved
isometrics and drawing.
• Inspection of all welding activities of piping process at work shop.
• Visual inspection of welding joint.
• Witnessing of PWHT as per Approved WPS.
• Checking of all fitting to be used in fabrication as per approved isometrics.
• Monitoring of consumables to be used and ensure that baking of special
electrode as per Approved WPS & MS.
• Inspection of Fit – up as per approved WPS.
• Verifying the work order, drawing and received material
• Preparation of final documentations
From Mar, 2003 to September, 2009
Company : MEMAC for construction & Engineering services. (AFPC
CONTRACT), Jonit venture between Syrian Oil and Shell Petroleum.
Position : senior supervisor and QA/QC Engineer in construction &maintenance projects.
Duties :
• Organization and supervision of multi discipline
maintenance team in an oil & gas field.
• Produce and read isometrics, drawing, P&ID and have a fully under standing of international
codes & standards ( ASME, ANSI, API, DIN,... etc )
• Preparation and planning of maintenance jobs and construction , writing material requisitions,
make cost estimate
• Develop and submit HSE plan for each individual jobs include a detailed hazard analysis,
together with adequate control and recovery measures for each hazard.
• Experience of cleaning & preparing equipment and facilities in an oil & gas environment for
inspection and fully conversant with normal and safe procedure.
Page 5 of 7

6. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
• Detailed description of work
• The work description shall include but not limited to the following:
• The repair and maintenance of the following.
• Floating roof tanks
• Fixed roof oil/water tanks
• Production separators, vessel, etc.
• Heat exchangers (sell & tube as well as air cooled)
• Flow lines, transport lines, pipe lines for oil and gas.
• Piping for oil, gas, air, water, etc. using carbon steel, low temperature carbon steel, duplex &
austenitic stainless steel.
• Hot tapping
• Emphasize and follow-up the implementation of safety rules
• Inspection of Pressure Vessels.
• Inspection of Heat Exchangers (Visual, hydrotest, Boroscope...etc).
• Interpretation of radiography films as per applicable code and client specification.
• Witnessing of hydrotest for insulation valves as per Specification.
• Witnessing of pneumatic for PSV as per Specification.
• Holiday test detection for Internal painting) and wrapping insolation.
• Witnessing of required NDT (PT, MPI).
• Inspection of fit up as per approved WPS.
• Verifying of Joint preparation, fit-up & welding as per approved WPS.
• Vacuum box for tanks bottom plates welding.
• Welder Performance Qualification (WPQ).
• NDT (RT-PT-MPI-TML-Hardness test-crack detector).
From July, 2002 till December, 2002
Company : CANCO Company (AFPC contract)
Position : Senior Mechanical Supervisor.
Duties
• Fabrication And Erection of stainless steel chemical injection skids for well heads.
Page 6 of 7

7. Eng. Ahmad Ibrahim Naser CURRICULUM VITAE
Tel No. +963-944-871587, +963-31-7383378 (Syria)
From October 1992 till July 2002
Company : HOMS Refinery
Position : PIPING SUPERVISOR
Duties
• Maintenance of all pipe work with different material carbon steel, alloy steel, stainless steel, etc.
• Major and minor modification for plant improvement
• Maintenance for all the static equipment in the refinery including but not limited the following
• Heat exchangers including sell & tube heat exchangers, boilers, furnaces, air cooled HIM.
• Tanks ( fixed & floating roof)
• Installation of five steam boilers and associate pipe work
• Construction & erection of reciprocating Compressors together with their auxiliaries such as the
connecting piping, drums, coolers, valves, ... etc with CKD PRAHA DIZ company
• Replacement of tubes for furnaces unit 500 made from ASTM A200T9
• Head and member of the many technical committees to establish the required specifications for
piping, tubing and fittings.
AHMAD NASER 1/12/2014
Page 7 of 7