Ahmed Sohail is seeking a position in mechanical engineering where he can contribute his skills and experience. He has over 10 years of experience in QA/QC inspection roles, specializing in welding and piping inspection. His experience includes projects for oil refineries and power plants in Pakistan, Qatar, and Saudi Arabia. He is certified in welding inspection and lead auditing and is proficient in English, Arabic, Urdu, and Punjabi.

1. Ahmed Sohail
Objective
Personal Information
Experience
To be an integral part of a dynamic organization which can provide me the
opportunity to contribute my skills and explore new avenues in the field of
mechanical engineering.
Born on November 22, 1987, Married, Pakistani Citizen
Permanent Address: 315-A Johar Town Lahore, Pakistan.
Postal Code: 54000
1. Employer: AL TARIQ CONSTRUCTION CO LTD.
Designation: QA/QC INSPECTOR
From: OCT, 2014 to date
Client: HEP
Company: (Attock Refinery Limited)
Project: Attock Oil Refinery Upgradation.
Location Rawalpindi Punjab Pakistan,
Responsibilities:
QA/QC(Welding/Piping)
• Study contract & specification to evaluate the level of quality control for
project to meet customer’s expectation/requirements comprehensively.
• Ensure that Procedures, Method Statements and QIP’s are followed at
site.
• Ensure that all relevant codes, specifications and drawings are applied
at Project and only current documents are in use.
• Carrying out daily Inspections of CS, SS, LA, MONEL, NACE and
Inconal piping fabrication & erection works as per ITP.
• Check MTC’s of all welding consumables, gases, flux, wires meet the
code/specification requirement and are in good condition prior to use.
Also responsible to control the proper storage, handling, baking and
issuance of consumables to welder at site.
• Monitor that all welding parameters are within the specified limits of
WPS during the welding operations & carry out visual inspection of the
completed welds.
• Ensure that all welding machines are calibrated as per frequency and
periodically inspected for any discrepancy and maintain log.
• Responsible for the marking and rectification of all the weld repairs.
• Carry out line walk down & ensure piping systems are installed
according to relevant P&ID’s & Isometrics.
• Preparation & verification of punch list.
• Witness pressure testing as applicable.
• Compile quality records and prepare QC dossiers for final handover to
client.
Cell #: +92-333-4099332
Cell #: +971-562594722
E-mail: ahmed.malik1@hotmail.com

2. Experience
Experience
2. Employer: DESCON ENGINEERING LTD
Designation: QA/QC INSPECTOR
From: OCT, 2012 to SEP,2014
Client: JGC
Company: Ras Gas(Qatar Petrolium)
Project: Barzan
Location Ras Laffan Industrial Area, Alkhor city,
Qatar
Responsibilities:
QA/QC(Welding/Piping)
• Study contract & specification to evaluate the level of quality control for
project to meet customer’s expectation/requirements comprehensively.
• Ensure that Procedures, Method Statements and QIP’s are followed at
site.
• Ensure that all relevant codes, specifications and drawings are applied
at Project and only current documents are in use.
• Carrying out daily Inspections of CS, LTCS, SS, LA and Inconal piping
fabrication & erection works as per ITP.
• Check MTC’s of all welding consumables, gases, flux, wires meet the
code/specification requirement and are in good condition prior to use.
Also responsible to control the proper storage, handling, baking and
issuance of consumables to welder at site.
• Monitor that all welding parameters are within the specified limits of
WPS during the welding operations & carry out visual inspection of the
completed welds.
• Ensure that all welding machines are calibrated as per frequency and
periodically inspected for any discrepancy and maintain log.
• Responsible for the marking and rectification of all the weld repairs.
• Carry out line walk down & ensure piping systems are installed
according to relevant P&ID’s & Isometrics.
• Preparation & verification of punch list.
• Witness pressure testing as applicable.
• Compile quality records and prepare QC dossiers for final handover to
client.
Qurrayah Combined Cycle Power Plant 2 October 2011 Sep
2012
Welding Inspector.
Fabrication, Installation and Erection of HRSG Piping with ARABIAN
BEMCO Contracting Co.Ltd
Responsibilities:
 Dimensional Inspection of spools, Incoming materials, equipment instalment
and Pipe supports.
 Carrying out the welding inspection before, during and after welding operation
as per approved test plan, relevant engineering drawing, international standard
and project specification.
 Witnessing welder’s performance qualifications test for piping (WQT & PQR)
as per ASME Sec IX.
 Monitoring Welding activities, NDT, Material Inspection, RT film interpretation
and related documentation.

3. Experience
Experience
 To ensure that welding is performed as per approved procedures
recommended
 Responsible in making Request for Inspection (RFI) for any Hold Point
 Control of QC documentation with reference to approved procedure,
ITP
 punch list items, ensuring they are being resolved
Riyadh Power Plant 10 May 2009 to Sep
2011
QA/QC(Welding/Piping)
Fire Fighting Water / Foam Supply Network piping installation and fuel oil
piping installation in BOP area at Riyadh Power plant 10 with
ARABIAN
BEMCO Contracting Co.Ltd
Responsibilities:
 Dimensional Inspection of spools, Incoming materials, equipment instalment
and Pipe supports.
 Carrying out the welding inspection before, during and after welding operation
as per approved test plan, relevant engineering drawing, international standard
and project specification.
 Witnessing welder’s performance qualifications test for piping (WQT & PQR)
as per ASME Sec IX.
 Monitoring Welding activities, NDT, Material Inspection, RT film interpretation
and related documentation.
 To ensure that welding is performed as per approved procedures
recommended
 Preparation of weld map and maintaining the weld record
 Responsible in making Request for Inspection (RFI) for any Hold Point
 Control of QC documentation with reference to approved procedure,
ITP
 Conversant with International Codes like ASME IX, API 1104, ASME
B31.3 etc.
 Witnessing of Air Blowing & hydro test of lines
 Preparation of test packages & witnessed hydro test and pneumatic
test and line flushing reinstated tested lines
 Prepare and monitor punch list items, ensuring they are being resolved
Riyadh Power Plant 08 Oct 2008 up to May
2009
QA/QC(Welding/Piping)
Piping installation of BOP at Riyadh Power plant 8 extention,PP8
III
With Al-Tokhi industrial Trading and Contracting Co.
Responsibilities:

4.  Planning all activities during and after fabrication
 Coordinating NDT activities Inspection of pipe to pipe & pipe to fittings
welds & various steel materials. If required performing mechanical test
and chemical analysis in order to confirm as per project specification
and relevant International Standard
 Maintaining welding inspection logs and other relevant document
 Conduct WQT as per Welding Procedure Specification
 Creating software data base reports for welding, NDT, material
traceability record (line wise, part wise, joint wise for approx – 50000
inch dial) as per daily work completion. Welding consumable control
 Responsible to review all approved piping test packages being
completed from hydro and pneumatic
testing and verify associated documentation in accordance to project
standard and specification
Educational
Qualification
Brief Summary of
Skills
Languages
2014 IRQA-UK LEAD AUDITOR ISO 9001:2008 Pakistan
2011 TWI (UK) Certificate # 59511 Expiry: 11 Sep 2016 Pakistan
Certified Welding Inspector CSWIP Level 2- (3.1)
2006 Chartered Management Accountant Pakistan
Certificate in Business Accounting (CIMA)
2005 Punjab College of Commerce Pakistan
Inter in commerce
2003 St.Stephens Cambridge School Pakistan
Matriculation
 Windows 98, 2000, XP, 2007, MS Office 2000, 2003, 2007 etc.
 Ms. Project
 Designing Software like AutoCAD.
 Familiar with international standards of ASME 31.3,31.1 for power plant
piping,ASME Sec IX for qualification standard of welding procedures
Fluent in English, Arabic, Urdu and Punjabi.