The document provides a curriculum vitae and details of Ahmad Rastom B. Mohd Nazim's professional experience. It summarizes his current role as a Source Inspection Coordinator and Engineering Inspector at DNV GL Malaysia, with responsibilities including sourcing inspectors, reviewing reports, and ensuring quality standards. It also outlines his 6 years of experience in mechanical engineering, inspection, and management roles at various companies.

1. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
1 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Personal Particular:
Name : Ahmad Rastom Bin Mohd Nazim
Current Profile : Source Inspection Coordinator/ Engineering Inspector
PastDesignation : R&D Engineer HVAC (System Design)
Degree : Mechanical Engineering (Automotive Engineering)
Citizenship : Malaysian
Location : Terengganu
Phone no : +60-197838033
Email : ahmad_rastom@yahoo.com
Available to start: 8th October 2017
Current Job Profile:
 Sourcing inspectors for each vendor based on project requirements
 Technically reviewreports, documents and procedures and send to project team
 Maintain up to date registers for all reports,man hours,invoices,NCR’s and abortive visits
 Ensure project requirements are compiled prior to releaseof equipment and materials
 Manage Quality Projectfor Local Vendor Inspection,Global Vendor Inspection
 SolvingQuality Issuerelates to PurchaseOrder,Interational Standard (etc: ASTM, ASME, EN, AWS)
 MonitoringSubordinates/Inspector movement and work quality
 Ensure works invoiced within timely manner and handlingSubordinates invoices.
 Managingwork done via Salesforcesystem(Cloudbasesoftware)
 Attending Site Inspection (Welding,Piping,Skid, Valve), Pre-Inspection Meeting and Solvingsite
quality issue
 Handlingexpeditingvisitfor worldwidevendor inspection
Summary of Professional Experience:
6 years experienced in various typeof mechanical engineering,inspection and management background such
as:
 Engineering Inspector for various package(valve,skid,electrical,mechanical package)
 Source Inspection Coordinator for DNV GL handlingadhoc and projectinspection request
 Source Inspection Coordinator for Shell Project: F14DR-A and F14/F29 Platformunder MMHE Sdn Bhd
 R&D Engineer for HVAC system where involved in heat transfer knowledge and HVAC component
 Trainee Engineer in Metal Stamping/fabrication company
Note: Please refer to Ahmad Rastom’s detailed Working Experience for full experience listed
Memberships/Certification: Training enrolled:
 Certified Magnetic ParticleInspection,
CSWIP Level II,2016
 Attended CSWIP Ultrasonic Level II Testing Course, 2017
 Certified WeldingInspector,CSWIP
Level II (Certification No: 99631),2015
 Attended CSWIP Magnetic ParticleLevel II Testing Course,
2016
 Registered with CIDB Malaysia,2014  Completed Shell MindFlash –Shell Induction Training,
Inspection Services from DNVGL, 2015
 Registered with Board of Engineers
Malaysia,2012
 Trained for DNVGL Inspection Software , iInspectby
SalesforceatKorea, 2015
 Registered with Institution of
Engineers Malaysia,2010
 Attended CSWIP 3.1 WeldingInspector Course -
CertificateNo: 1WBU/676707, 2014

2. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
2 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
 Product Training –DMS GO UT Thickness Measurement,
2014
 CIDB Green Card Training – 2014
 DNV GL in-house training –Safety Boat Transfer, 2014 &
Confines Space, 2014
 MicrosoftExcel Training – Basic,2013
 Enrolled in shortcourses – ISO 9001:2008 Quality
Management System Requirement, 2011
Educational Background:
No. Year Qualification Institution Achievement
1) 2007 - 2011
Bachelor of Degree Engineering
(Mechanical)
Universiti Teknologi
Malaysia (UTM), Johor
Latest CPA: 3.62
Average CGPA: 3.38
Major CGPA: 3.64
Test of English Communication Skill:
Oral - Band 4
Writing - Band 3
2) 2006 – 2007 Certificate in Physical Science
N. Sembilan Matriculation
College.
CPA: 3.78
MUET: Band 3
Professional Experience: Note: Please refer to Ahmad Rastom’s detailed Working Experience for full details
No. Year Role Company Achievement
1)
October 2016 –
Present
Source Inspection Coordinator &
Engineering Inspector
DNV GL Malaysia
Sdn Bhd
Currently handling Source
Inspection of Repsol’s Kinabalu
Redevelopment and Bunga Pakma
2)
January 2016 –
October 2016
Source Inspection Coordinator &
Engineering Inspector
Germanischer Lloyd
GLM Sdn Bhd
Additional job role as Engineering
Inspector while doing coordination
for Local and Global Vendor
Inspection
3)
December 2013 –
January 2016
Source Inspection Coordinator
Germanischer Lloyd
GLM Sdn Bhd
Completing Bergading Project
(timeliness and quality) and
Trusted to take over the Global
Vendor Inspection for Malaysia
4)
September 2012 -
December 2013
Project Inspection Coordinator
MalaysiaMarineand
Heavy Engineering
Manage to save half of F14DR-A
Source Inspection Budget, 2013 and
Good award for Source Inspection
of F14DR-A (Sarawak Shell’s Audit),
2013
5)
September 2011 -
September 2012
R&D Engineer – HVAC System OYL Sdn Bhd
Nominated as 5S Chairman of O.Y.L
R&D Centre for period of 6 months ,
2012 and completing case study of
Noise Issue via changing the design
of superheated inlet tube

3. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
3 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Miscellaneous details:
 Familiarwith Codes and Standards (ASTM, API, ASME, Shell Engineering Standard)
 Familiarwith Design Software (AutoCad, SolidWork,CatiaV5)
 Familiarwith SAP System
 Trained with EspiritSoftware (tailored software for HVAC Heat Transfer Efficiency)
 Knowledgeable on P&ID, WQPT, WQT, Valves, Cable,HVAC, Skid, Vessels,Painting
 On time submission of Inspection Report to Client
 Active in ProjectManagement and Technical Matters related to Quality as per Governed Standard
 Experienced in ManagingPersonnel travellingplan onshore/offshorework execution
 Experienced in solvingquality issue(etc: Vessel misalignment,improper packing,visual dimensional
issue,ratingissue)
 Act as focal pointamong Client,Inspector, Vendor, Subvendor and Technical Specialist
 Planningworks to be completed by Inspector and reporting to Client within same day
 Providetechnical inputs to assigned Inspector duringwork commenced, ensuringno missingaction
References:
1. Name: Mohd Idris bin Sabtu
Position:Senior Inspector
Organisation:DNV GL Sdn Bhd
Contact no: +60-192648263
3. Name: Mohd Azli Bin Surip
Position:Senior Inspection Coordinator for Shell,Malikai
Organisation:Velosi
Contact no: +60-197113836
2. Name: Noor Azanizam
Position:QC Engineer (F14DR-A)
Organisation:MMHE Sdn Bhd
Contact no: +60-137771396

4. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
4 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Detailed Working Experience

5. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
5 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Detailed Working Experience:
1) DNV GL Malaysia SDNBHD OCTOBER 2016,
PRESENT
Position: Source Inspection Coordinator & Engineering Inspector
Responsibilities:-
A. As source Inspection coordinator
I. Assigningwork to inspectors and monitoringof adequate work execution, review and authorisation of
inspection reports and certificates to be issued.
II. Maintain and enforce complianceto standard inspection procedures,establish projectspecific procedures
where required and liaisewith clients and manufacturers on inspection matters and projectexecution.
III. Coordinateinspector movement for respective worksite and engagement of contract inspectors as per it’s
needs
IV. MonitoringInspector work for complianceto Client’s requirement and International Standard
Project handled/coordinate:-
Client: Repsol MalaysiaLimited
Project: Source Inspection for Choke Valve, DBB Valve, Wet Venturi Meter, Life SavingEquipment, Seamless
Pipe.
Client: Brunei Shell Petroleum
Project: Source Inspection for Bend by Pantech
Source Inspection of Coatingby Wasco
1) GERMANISCHER LLOYD GLM SDNBHD DEC 2013, OCTOBER
2016
Position: Source Inspection Coordinator & Engineering Inspector
Responsibilities:-
A. As source Inspection coordinator
I. Assigningwork to inspectors and monitoring of adequate work execution, review and authorisation of
inspection reports and certificates to be issued.
II. Maintain and enforce complianceto standard inspection procedures,establish projectspecific procedures
where required and liaisewith clients and manufacturers on inspection matters and projectexecution.
III. Coordinateinspector movement for respective worksite and engagement of contract inspectors as per it’s
needs
Project handled/coordinate:-
Client: Talisman MalaysiaLimited
Project: Source Inspection (Global) for Kinabalu & Bunga Pakma Development, Febr 2015 – September 2016
Scope: Source Inspection for Oversea supplied package(SAWL LinePipe, Fittings,Olets,Air Compressor,
Welded Tubulars,InletDiffusers,DBB Valves)

6. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
6 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Client: Murphy Malaysia
Project: Source Inspection (Global) for Scope B1 - Deepwater
Scope: Source Inspection for Oversea supplied package(PressureHub, SurfaceJet Pump, Artificial Lifting
Equipment)
Client: Hyundai Heavy Industries
Project: Bergading WHP & CPP, 2015 – August 2016.
Scope: Source Inspection for Malaysia’s Supplied Item for various packages asbelow:
Client: Hyundai Heavy Industries
Project: Bergading WHP & CPP, 2015 – August 2016.
Scope: Source Inspection for Malaysia’s Supplied Item for various packages asbelow:
I. Vendor: Eco Tower Sdn Bhd & West Port Fabrication Sdn Bhd
Package: Hydrocyclone& Produced Water Floatation Vessel
Scope: Pre Inspection Meeting, Fit-Up, Welding,Blast/Prime,Hydrotest,
Acid Cleaning,Final Visual/Dimensional
II. Vendor: Amalgamated Metal Corporation & EProcess Technologies
Package: Fine Desander & CoarseDesander
Scope: Fabrication Inspection,Dimensional Inspection
III. Vendor: Sime Darby Tractors Sdn Bhd
Package: Emergency Diesel Generator Package
Scope: Pre Inspection Meeting, Fit-Up, Welding,Blast/Prime,Visual Dimensional
IV. Vendor: Peco Facet (M) Sdn Bhd / AMC, Gebeng
Package: General Filter Vessel
Scope: Pre Inspection Meeting, Fit-Up, Welding,Blast/Prime,Hydrotest, Acid Cleaning,
Final Visual/Dimensional
V. Vendor: FavelleFavco Sdn Bhd
Package: CPP Pedestal Crane
Scope: Pre Inspection Meeting, Fit-Up, Welding,NDT Witness,Blast/Prime,Final
Visual/Dimensional
VI. Vendor: Jutasama Sdn Bhd
Package: Thin Walled & Thick Walled PressureVessel
Scope: Pre Inspection Meeting, Fit-Up, Welding,Visual/Dimensional
Other Projects handled:
Client: Thai Nippon Steel
Vendor: FavelleFavco Crane Malaysia
Scope: 11 units of cranes fabrication inspection as per client’s inspection monitoringsystem

7. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
7 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Client: Premier Oil Vietnam
Vendor: Mirvalves Sdn Bhd
Scope: Valve inspection (etc: NDT, hydrotest, final inspection)
Client: INPEX Australia
Vendor: NOV FGS Sdn Bhd
Scope: GRE Pipe fabrication’sresidentinspection (etc : harness Test, Short Term BurstTest)
Client: Petrofac Malaysia
Vendor: N/A
Scope: Lifting Audit for Petrofac’s asset(Total of 9 assets includingMOPU2, Kemaman Supply Base, Cendor)
Client: Egyptian RefiningCompany
Vendor: BabCock Hitachi,Philipines
Scope: Boiler Fabrication’sstages inspection (etc: PIM, Material Inspection,FitUp inspection,RT, Hydrotest)
B. As Engineering Inspector
I. Joint inspection alongwith inspector for various assignment.
II. Report review to ensure all reports arecomplied with client’s requirement and ensuringno complains on
reporting manner (technically/commercially)
III. Followup inspection with all parties involved in order to provideclientwith useful info
Inspection conducted/witnessed:
Client: Daewoo Nigeria Ltd
Scope: Hydrotest, Fugitive Emission Test, FAT for Carbon and Duplex Stainless Steel of Manual & Auto mated
Choke Valve
Client: Jack In PileSdn Bhd
Scope: Pre-Bore Machineinspection atPutrajaya for DOSH Crane approval permit
Client: Daewoo International Corporation
Scope: Witnessed WQT under EJJV Sdn Bhd for Daewoo Project(6G Welding)
Client: Aker Solutions Sdn Bhd
Scope: Witnessed WPQT for Aker Solutions under the TullowTen project (Auto Gtaw)
Client: Lucstar Sdn Bhd
Scope: Witnessed UT Thickness Meassurement for 10 KL LPG Tank (usingDMS GO)
Client: OAG Group Sdn Bhd
Scope: Witnessed High Density PolyurethaneFoam Testing & Witnessed Fusion Bonded Epoxy Testing
Client: DNVGL Korea
Scope: Witnessed FAT for Rock Catcher, Surge Tank, Dust Collector and Cycloneat Vesseltech Eng Sdn Bhd
Client: DNVGL Thailand for CUEL
Scope: Witnessed Functional,Packing,Final Inspection for Control Valve
Client: Sapura Kencana (Allied MarineEquipment)

8. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
8 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Scope: Witnessed Pneumatic Test for PressureVessel Human Occupancy (Deck Decompression Chamber
and Low PressureVolume Tank)
2) Malaysia Marineand Heavy Engineering SEPTEMBER 2012, DECEMBER 2013
Position: Source Inspection Coordinator
Project: F14DR-A Topside and Jacket fabrication.
Responsiblilities:
A.As Source Inspection Coordinator
I. Preparinginspection plan for all packages’discipline
II. Singlehandled the F14-DR Source Inspection for all packages
III. Carry out inspection of for various package(Mechanical/Electrical/Piping/Instrument)
IV. Report review to ensure TPI reporting is correctas per project’s requirement
V. Keep summary of inspection record throughout project
VI. Review/Endorse Material data Book for the Final Documentation of Supplier’s item quality
VII. Reporting to Sarawak Shell Berhad Quality Supply Engineer
Package handled/coordinate:
Client: Shell Sarawak Berhad
Vendor: FirstMarinePte Ltd
Package:Aluminum Helideck – As per Client Requirement (etc: CAP 437/SES 47.1)
Client: Shell Sarawak Berhad
Vendor: KL Valve Fittings
Package: Instrument 6 Way Air Manifold,DBB Valves
Client: Shell Sarawak Berhad
Vendor: IEV Sdn Bhd
Package: PileGripper / Diaphragm/ Grout Packer
Client: Shell Sarawak Berhad
Vendor: Gerbaru Jaya Sdn Bhd
Package: Butterfly Valve, Gate Valve
Client: Shell Sarawak Berhad
Vendor: Wintake Sdn Bhd
Package: CO2 Suppression System, Fire FightingEquipment
B. Inspection and testing
I. Joint inspection alongwith inspector for various assignments.
II. Review ITP, Testing Procedure as per Client’s specification.
III. Review/Accept on Material Data Record as Final Documentation
Inspection conducted/witnessed:
Client: Shell Sarawak Berhad

9. Ahmad Rastom B. Mohd Nazim
ahmad_rastom@yahoo.com / 0197838033
Quality /Mechanical Engineering/ Inspection
9 of 9
Document Détails:
1) Page 1 to 3: CurriculumVitae
2) Page 4 to 9: Working Experience
Vendor: KL VAF Sdn Bhd
Scope: WitnessingHydro Test, Pneumatic and Final Inspection for various sizeof Check Valves, DBB Valve
Client: Shell Sarawak Berhad
Vendor: Kumpulan Agresif Sdn Bhd
Scope: WitnessingDeluge ValveTest (Functional/Final Inspection) ,Ball Valve,Gate Valve, Globe Valve
(Functional/Final Inspection)
Client: Shell Sarawak Berhad
Vendor: SBN Industries Sdn Bhd
Scope: Cathodic Protection/AluminiumAnode (corrosion/continuity/electrochemical test),Mechanical Testing
for API 5L pipe at PTS, Johor.
Client: Shell Sarawak Berhad
Vendor: Hi-EssenseSdn Bhd
Scope: Power Cable(Final Inspection/electrical testing –High Voltage Test/Continuity Test/Wire Construction)
Client: Shell Sarawak Berhad
Vendor: Micric EngineeringSdn Bhd
Scope: Watson McDaniel’s Liquid Drainer (Hydro/functional testing) inspection
Client: Shell Sarawak Berhad
Vendor:MSET Engineering Sdn bhd
Scope: Progress VisitInspection/FitUp inspection for Service Water Tank
Client: Shell Sarawak Berhad
Vendor: OridiantSdn Bhd
Scope: Thermowell (Final Inspection/Visual/Dimensional/Hydrotest)
Client: Shell Sarawak Berhad
Vendor: Wintake Sdn Bhd
Scope: CO2 Suppression System Hydrotest
3) O.Y.L Sdn Bhd SEPTEMBER 2011 , SEPTEMBER 2012
Position: R&D Engineer – System Design
Project: HVAC – Residential Application
Responsibilities:
A.General
I. Designing HVAC system
II. Handling3 project ata time
III. Carry out mock up work for the new model (includingprocess:bending, machining,brazingand fitting)
IV. Heat Calculation to ensure targeted capacity achieved usingHeat Transfer software
V. Sourcingthe best usage of compressor for HVAC system
VI. Testing and optimizingthe HVAC system within research and development laboratory
B. Research and Testing
I. Conducting testing for the new model to meet Middleeast Market/Environment
II. Research on noiseissuethatcomplained by customer which ableto be solved usingnew design for the
superheated inlettube.