This document describes the design and development of a solar-powered automatic seed sowing machine that can help farmers sow seeds more efficiently. Key components of the machine include a solar panel, battery, microcontroller, sensors, electric motor and a seed dispensing mechanism. The machine is designed to sow seeds at the desired depth and spacing automatically as it is moved across the field. This helps reduce labor costs and time spent on sowing compared to manual methods. The document discusses the working of various parts and potential applications like attaching multiple hoppers or sprinklers to cover larger farm areas. It is concluded that the automatic solar-powered machine offers advantages like low cost, easy operation and improved sowing accuracy.
Monitoring and Control of Solar Power System using Reliance SCADAijtsrd
This system presents the monitoring and control of real time data acquisition of a solar power system in reliance SCADA. SCADA supervisory control and data acquisition systems are currently employed in many applications, such as home automation, greenhouse automation, and hybrid power systems. Commercial SCADA systems are costly to set up and maintain therefore those are not used for small renewable energy systems. This system demonstrates applying Reliance SCADA and Arduino Uno on a small photovoltaic PV power system to monitor the current, voltage, of the PV and battery and also control the load from SCADA. The designed system uses low cost sensors, an Arduino Uno microcontroller, and free Reliance SCADA software. The Arduino Uno microcontroller collects data from sensors and communicates with a computer through a USB cable. Uno has been programmed to transmit data to Reliance SCADA on PC. In addition, Modbus library has been uploaded on Arduino to allow communication between the Arduino and our SCADA system by using the MODBUS RTU protocol. The results of the experiments demonstrate that SCADA works in real time and can be effectively used in monitoring a solar energy system. Khin Pyone Ei Aung | Nyan Phyo Aung | Lwin Lwin Htay "Monitoring and Control of Solar Power System using Reliance SCADA" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26459.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26459/monitoring-and-control-of-solar-power-system-using-reliance-scada/khin-pyone-ei-aung
The designed SCADA software system ensured remote monitoring of the positions and advanced system health conditions of all the solar tracking systems to provide data analytics and reporting. This SCADA solution was designed and developed toco-exist in a remote system that will continuously monitor multiple fields consisting of several masters and their respective slave trackers.
Efficient Energy Management System with Solar EnergyIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
Monitoring and Control of Solar Power System using Reliance SCADAijtsrd
This system presents the monitoring and control of real time data acquisition of a solar power system in reliance SCADA. SCADA supervisory control and data acquisition systems are currently employed in many applications, such as home automation, greenhouse automation, and hybrid power systems. Commercial SCADA systems are costly to set up and maintain therefore those are not used for small renewable energy systems. This system demonstrates applying Reliance SCADA and Arduino Uno on a small photovoltaic PV power system to monitor the current, voltage, of the PV and battery and also control the load from SCADA. The designed system uses low cost sensors, an Arduino Uno microcontroller, and free Reliance SCADA software. The Arduino Uno microcontroller collects data from sensors and communicates with a computer through a USB cable. Uno has been programmed to transmit data to Reliance SCADA on PC. In addition, Modbus library has been uploaded on Arduino to allow communication between the Arduino and our SCADA system by using the MODBUS RTU protocol. The results of the experiments demonstrate that SCADA works in real time and can be effectively used in monitoring a solar energy system. Khin Pyone Ei Aung | Nyan Phyo Aung | Lwin Lwin Htay "Monitoring and Control of Solar Power System using Reliance SCADA" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26459.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26459/monitoring-and-control-of-solar-power-system-using-reliance-scada/khin-pyone-ei-aung
The designed SCADA software system ensured remote monitoring of the positions and advanced system health conditions of all the solar tracking systems to provide data analytics and reporting. This SCADA solution was designed and developed toco-exist in a remote system that will continuously monitor multiple fields consisting of several masters and their respective slave trackers.
Efficient Energy Management System with Solar EnergyIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
An open source intelligent auto wakeup solar energy harvesting system for sup...LeMeniz Infotech
An Open Source Intelligent Auto-Wakeup Solar Energy Harvesting System for Supercapacitor-Based Energy Buffering
Energy harvesting systems that couple solar panels with supercapacitor buffers offer an attractive option for powering computational systems deployed in field settings, where power infrastructure is inaccessible. Supercapacitors offer a particularly compelling advantage over electrochemical batteries for such settings because of their ability to survive many more charge–discharge cycles. We share a versatile open source design for such a harvesting system that targets embedded system applications requiring power in the 1–10 W range. Our system is designed for high efficiency and controllability and, importantly, supports auto-wakeup from a state of complete energy depletion.
Web : http://www.lemenizinfotech.com
web : http://www.lemenizinfotech.com/embedded-ieee-projects-2016-2017/
Web : http://ieeemaster.com
Web : http://ieeemaster.com/embedded-ieee-projects-2016-2017/
Address: 36, 100 Feet Road(Near Indira Gandhi Statue), Natesan Nagar, Pondicherry-605 005
Contact numbers: +91 95663 55386, 99625 88976 (0413) 420 5444
Mail : projects@lemenizinfotech.com
Mobile : 9566355386 / 9962588976
Real Time Monitoring and Electro Magnetic Interference causing Data corruptionRekaNext Capital
On site, where there are motors and generators, the sensor reading are affected by Electro-Magnetic Interference. The presentation shares some Good Engineering Practices to minimize Data Corruption. Real Time Monitoring Data Quality is even more sensitive to Data Corruption as there is a huge amount of sensors per hour.
Design of A REAL TIME Arduino Controlled Wireless Monitoring System for Solar...IJSRD
To improve the efficiency of solar systems, it is very important to get more information about solar panel performance, tracking and maintenance. In this paper data monitoring of solar power system is performed by combination ARDUINO UNO and ARDUINO WI-FI SHIELD Communication. Which has the ability to identify areas of failure and can be easily accessed. The ARDUINO UNO is used for data automatic analysis, processing, displaying and saving automatically whereas ARDUINO WI-FI SHIELD communication device is responsible for real time data transmission to the monitoring center. This system monitors the ambient temperature around solar power generation equipment’s, humidity, solar irradiation, generated current and voltage by solar panel and battery voltage it also controls the battery charging level. At the receiving end SQL database is used to save the data and for displaying purpose web based is used.
In this project an automated greenhouse robot was built with the purpose of controlling the greenhouse
environment Parameters such as temperature and humidity. The microcontroller used to create the automated
greenhouse robot was an AT89s51. This project utilizes three different sensors, a humidity sensor, a Light
sensor and a temperature sensor. The 2sensors are controlling the two Relays which are a fan (for cooling) and
a bulb (for heating). The fan is used to change the temperature and the bulb is used to heat the plants. The
humidity control system and the temperature control system were tested both separately and together. The
result showed that the temperature and humidity could be maintained in the desired range.
An open source intelligent auto wakeup solar energy harvesting system for sup...LeMeniz Infotech
An Open Source Intelligent Auto-Wakeup Solar Energy Harvesting System for Supercapacitor-Based Energy Buffering
Energy harvesting systems that couple solar panels with supercapacitor buffers offer an attractive option for powering computational systems deployed in field settings, where power infrastructure is inaccessible. Supercapacitors offer a particularly compelling advantage over electrochemical batteries for such settings because of their ability to survive many more charge–discharge cycles. We share a versatile open source design for such a harvesting system that targets embedded system applications requiring power in the 1–10 W range. Our system is designed for high efficiency and controllability and, importantly, supports auto-wakeup from a state of complete energy depletion.
Web : http://www.lemenizinfotech.com
web : http://www.lemenizinfotech.com/embedded-ieee-projects-2016-2017/
Web : http://ieeemaster.com
Web : http://ieeemaster.com/embedded-ieee-projects-2016-2017/
Address: 36, 100 Feet Road(Near Indira Gandhi Statue), Natesan Nagar, Pondicherry-605 005
Contact numbers: +91 95663 55386, 99625 88976 (0413) 420 5444
Mail : projects@lemenizinfotech.com
Mobile : 9566355386 / 9962588976
Real Time Monitoring and Electro Magnetic Interference causing Data corruptionRekaNext Capital
On site, where there are motors and generators, the sensor reading are affected by Electro-Magnetic Interference. The presentation shares some Good Engineering Practices to minimize Data Corruption. Real Time Monitoring Data Quality is even more sensitive to Data Corruption as there is a huge amount of sensors per hour.
Design of A REAL TIME Arduino Controlled Wireless Monitoring System for Solar...IJSRD
To improve the efficiency of solar systems, it is very important to get more information about solar panel performance, tracking and maintenance. In this paper data monitoring of solar power system is performed by combination ARDUINO UNO and ARDUINO WI-FI SHIELD Communication. Which has the ability to identify areas of failure and can be easily accessed. The ARDUINO UNO is used for data automatic analysis, processing, displaying and saving automatically whereas ARDUINO WI-FI SHIELD communication device is responsible for real time data transmission to the monitoring center. This system monitors the ambient temperature around solar power generation equipment’s, humidity, solar irradiation, generated current and voltage by solar panel and battery voltage it also controls the battery charging level. At the receiving end SQL database is used to save the data and for displaying purpose web based is used.
In this project an automated greenhouse robot was built with the purpose of controlling the greenhouse
environment Parameters such as temperature and humidity. The microcontroller used to create the automated
greenhouse robot was an AT89s51. This project utilizes three different sensors, a humidity sensor, a Light
sensor and a temperature sensor. The 2sensors are controlling the two Relays which are a fan (for cooling) and
a bulb (for heating). The fan is used to change the temperature and the bulb is used to heat the plants. The
humidity control system and the temperature control system were tested both separately and together. The
result showed that the temperature and humidity could be maintained in the desired range.
Today, we know that solar energy is a renewable source of energy. And the fossils fuel may not be available in the future and it also pollutes to our environment. So we have to use, one of the most promising source of energy where everyone focusing on the concept of solar power and its utilization. Smartly grass cutting robot detects obstacles by the ultrasonic sensor with servo in wide range for avoiding obstacles without any need of human interaction. All the motors, sensors and cutting operation are automatically controlled by the Arduino and manually by Bluetooth module. And the cutting operation is performed by single metallic thread which is operated by DC motor 10000 rpm . Cutting robot batteries charged by a charging dock which is located in the ground separately. Charging dock is attached with the Solar panel and charging controller. Ajit Singh Shekhawat | Nikesh Kumar | Roopal Yadav | Siddharth Tyagi | Arun Pratap Singh ""Smart Solar Grass Cutter Robot"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23320.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23320/smart-solar-grass-cutter-robot/ajit-singh-shekhawat
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.