The document discusses various advanced diagnostic aids used in periodontal diagnosis. It summarizes conventional diagnostic methods and their limitations. It then describes advances in clinical diagnosis using probes, radiographic assessment using digital radiography and subtraction radiography. It also discusses advances in microbiological analysis using methods like bacterial culturing, direct microscopy, immunodiagnostic assays and molecular techniques like PCR. Advances in characterizing the host response using markers of inflammation are also highlighted.
Porphyromonas gingivalis belongs to the phylum Bacteroidetes and is a nonmotile, Gram-negative, rod-shaped, anaerobic, pathogenic bacterium. It forms black colonies on blood agar.
It is found in the oral cavity, where it is implicated in certain forms of periodontal disease, as well as in the upper gastrointestinal tract, the respiratory tract, and the colon. It has also been isolated from women with bacterial vaginosis. Collagen degradation observed in chronic periodontal disease results in part from the collagenase enzymes of this species. It has been shown in an in vitro study that P. gingivalis can invade human gingival fibroblasts and can survive in them in the presence of considerable concentrations of antibiotics.P. gingivalis also invades gingival epithelial cells in high numbers, in which cases both bacteria and epithelial cells survive for extended periods of time. High levels of specific antibodies can be detected in patients harboring P. gingivalis. Dr Harshavardhan Patwal , explains the various enzymes enzyme peptidyl-arginine deiminase, which is involved in citrullination.[4] Patients with rheumatoid arthritis have an increased incidence of periodontal disease, and antibodies against the bacterium are significantly more common in these patients.
P. gingivalis is divided into K-serotypes based upon capsular antigenicity of the various types.
Porphyromonas gingivalis belongs to the phylum Bacteroidetes and is a nonmotile, Gram-negative, rod-shaped, anaerobic, pathogenic bacterium. It forms black colonies on blood agar.
It is found in the oral cavity, where it is implicated in certain forms of periodontal disease, as well as in the upper gastrointestinal tract, the respiratory tract, and the colon. It has also been isolated from women with bacterial vaginosis. Collagen degradation observed in chronic periodontal disease results in part from the collagenase enzymes of this species. It has been shown in an in vitro study that P. gingivalis can invade human gingival fibroblasts and can survive in them in the presence of considerable concentrations of antibiotics.P. gingivalis also invades gingival epithelial cells in high numbers, in which cases both bacteria and epithelial cells survive for extended periods of time. High levels of specific antibodies can be detected in patients harboring P. gingivalis. Dr Harshavardhan Patwal , explains the various enzymes enzyme peptidyl-arginine deiminase, which is involved in citrullination.[4] Patients with rheumatoid arthritis have an increased incidence of periodontal disease, and antibodies against the bacterium are significantly more common in these patients.
P. gingivalis is divided into K-serotypes based upon capsular antigenicity of the various types.
Periodontitis is a complex infection initiated by bacteria –tissue destruction.
Host: the organism from which a parasite obtains its nourishment/ an individual who receives a graft
Modulation: the alteration of function or status of something in response to a stimulus or an altered physical or chemical environment
Furcation involvement is a common sequela of severe chronic periodontal disease. Its effective management has a profound influence on the outcome of periodontal therapy.
Definition of periodontal pocket, classification, Histopathology of periodontal pocket, microflora involved, pathogenesis, periodontal pocket as a healing lesion, microtopography of root surface, treatment of periodontal pocket
Advanced Diagnostic Aids in Periodontology .pptxDanish Hamid
In periodontology, advanced diagnostic aids include techniques like digital radiography, cone beam computed tomography (CBCT), microbiological and biochemical studies and advanced periodontal probing. These tools help in assessing bone levels, identifying periodontal pockets, and planning effective treatment strategies. Additionally, biomarker analysis and genetic testing are emerging areas for understanding individual susceptibility to periodontal diseases.
Periodontitis is a complex infection initiated by bacteria –tissue destruction.
Host: the organism from which a parasite obtains its nourishment/ an individual who receives a graft
Modulation: the alteration of function or status of something in response to a stimulus or an altered physical or chemical environment
Furcation involvement is a common sequela of severe chronic periodontal disease. Its effective management has a profound influence on the outcome of periodontal therapy.
Definition of periodontal pocket, classification, Histopathology of periodontal pocket, microflora involved, pathogenesis, periodontal pocket as a healing lesion, microtopography of root surface, treatment of periodontal pocket
Advanced Diagnostic Aids in Periodontology .pptxDanish Hamid
In periodontology, advanced diagnostic aids include techniques like digital radiography, cone beam computed tomography (CBCT), microbiological and biochemical studies and advanced periodontal probing. These tools help in assessing bone levels, identifying periodontal pockets, and planning effective treatment strategies. Additionally, biomarker analysis and genetic testing are emerging areas for understanding individual susceptibility to periodontal diseases.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
2. Contents
Introduction
Limitations of conventional periodontal diagnosis
Advances In Clinical Diagnosis
Advances In Radiographic Assessment
Advances Microbiologic Analysis
Advances In Characterizing The Host Response
3. Introduction
• Definition : Diagnosis is defined as identifying the disease
from an evaluation of history, signs and symptoms, laboratory
tests and procedures.
• Importance :
a. It identifies and indicates the nature of etiological factors
b. Indicates the nature of pathological processes
c. It is essential for treatment planning
4. types of diagnosis
Provisional differential comprehensive
therapeutic
emergency
Diagnostic aids in periodontics conventional
advanced
6. • Tissue destruction ( Periodontitis)
Loss of connective tissue
clinical radiographic
attatchment loss bone loss
Gives historical evidence of damage
Identify and quantify current clinical signs of inflammation
7. Limitations
• Does not provide cause of condition
• Susceptibility of patient
• Cannot reliably identify sites with ongoing periodontal
destruction
• Cannot differentiate whether response to therapy is positive or
negative
8. • Periodontal disease is localised and multifactorial.
Periodontal
pathogens
Host
response
behaviouralsystemic
Genetic
9. • Consideration should be given microbiologic
immunologic
systemic
genetic
behavioural factors
in addition to clinical and radiographic parameters.
10. • The focus is now disease prevention, early discovery, and
intervention to minimize treatment, thus enabling the most
desirable outcomes.
• Diagnostic modalities available to clinicians today expand
greatly on the foundation of a comprehensive visual
assessment, which has been and will be the cornerstone of the
diagnostic process.
11. Classification
• Aids used in clinical diagnosis
i. Conventional probes – regular examination
ii. Millimeter probes – for gingival bleeding
iii. Pressure sensitive probes
Other clinical diagnostic aids
i. Filter papers- for measuring GCF
ii. Periotron 6000- for measuring GCF
iii. Olfactometer- for mouth odors
iv. Mobilometer- for tooth mobility
v. PSR- for faster screening and recording of PD
12. • Aids used in radiographic diagnosis
i. IOPA radiographs
ii. Ortho-pantomograph
iii. Xero-radiography
• Aids used in microbial diagnosis
i. Direct examination
a. Light microscopy
b. Dark field microscopy
ii. Culture tests
a. Aerobic culture
b. Anaerobic culture
13. • Aids used in immunological diagnosis
i. Immunofluorescense- direct and indirect
ii. Polymerase chain reaction
iii. Latex agglutination
iv. Flow cytometry
v. ELISA
• Biochemical diagnosis
i. Studies for prostaglandins
ii. Studies for collagenase
• Other diagnostic aids
i. study casts
ii. FSEIA
iii. N-benzoyl-DL- arginine 2- naphthylamide (BANA)
14. Advanced diagnostic aids
• Advanced periodontal probes
i. Automated controlled force probes
ii. Thermal periodontal probes
• Advanced diagnostic aids in periodontal radiography
i. Digital radiography
ii. Substraction radiography
iii. Digital substraction radiography
iv. Transmission radiography
v. Magnetic resonance imaging
vi. Computerized tomography
vii. Nuclear medicine bone scan
15. • Advanced diagnostic aids in microbiologic analysis
i. Advances in culturing technique
ii. Advances in immunodiagnostic methods
iii. Advances in enzymatic methods
iv. Advances in nuclear biology- PCR and DNA probes
• Advanced diagnostic aids in charting the host response
i. Assessment of inflammatory mediators and products
ii. Assessment of tissue breakdown products
iii. Assessment of host derived enzymes
16. • Advanced diagnostic aids to determine periodontal disease
activity
i. Crevicular contents
• Products of bacteria
• Products of host cells and host immunity
ii. Markers in peripheral blood
• Neutrophil functional profile
• Monocyte responsiveness to LPS
• Circulating antibodies to plaque bacteria
iii. Detection of specific periodontal pocket bacteria
a. DNA probes
b. BANA hydrolysis
c. Antibody techniques
17. Advances in clinical diagnosis
• Degree of gingival inflammation
a. redness and swelling
b. gingival bleeding
• Gingival bleeding ∞ plaque accumulation
gingival inflammation
(Greenstein G et al 1981)
size of inflammatory infiltrate
probability of losing attatchments
(Lang et al.1991)
18. Gingival temperature
• Thermal probes are sensitive diagnostic devices for measuring
early inflammatory changes in gingival tissue.
(Kung et al 1990)
• Commercially available system periotemp probe
• Individual temperature differences are compared with those
expected for each tooth and higher temperature pockets are
signaled with a red emitting diode.
• Subgingival temperature at diseased sites is increased as
compared to normal healthy sites
19. • Elevated subgingival temperature ∞ attatchment loss
& elevated propertions of
periodontopathic bacteria
( Haffajee et al.)
20. Periodontal probes
• Most widely used
• Clinical assessment of connective tissue destruction in
periodontitis
• Gold standard – recording changes in periodontal status
• Probing depth is measured from the free gingival margin
(FGM) to the depth of the probable crevice.
• not the most objective measure of loss of periodontal tissues
21. • CAL is a more objective measure of loss of Existing
periodontal support.
• CAL also does not give any indication of current disease
activity.
• When interpreting the PD and CAL measurements made with
conventional periodontal probes, it is important to consider
that these values depend on the inflammatory state of the
tissues.
22. Classification of periodontal probes depending
on generation.
1.First generation probes:(conventional probes)
Conventional manual probes that do not
control probing force or pressure and
that are not suited for automatic data
collection.
eg: Williams periodontal probe
CPITN probe
UNC-15 probe
University of Michigan’O’ probe
Goldman Fox probe
Glickman probe
Merritt A and B probe
23. 2.Second generation probe:
(Constant force probe)
Introduction of constant force or pressure sensitive probes
allowed for improved standardization of probing.
e.g.: Pressure sensitive probe
Constant pressure probe
3.Third generation probe:(Automated probes)
Computer assisted direct data capture was an important step in
reducing examiner bias and
also allowed for generation probe precision.
e.g.: Toronto probe
Florida probe
Interprobe, Foster Miller probe.
24. 4.Fourth generation probes:(Three dimensional probes)
Currently under development, these are aimed at recording
sequential probe positions along a gingival sulcus.
An attempt to extend linear probing in a serial manner to take
account of the continuous and three dimensional pocket that
is being examined.
5.Fifth generation probe:(Noninvasive)
Three dimensional probe.
Basically these will add an ultrasound to a fourth generation
probes.
If the fourth generation can be made, it will aim in
addition to identify the attachment level without
penetrating it.
e.g.: Ultra sonographic probe.
25. Florida probe:
Tip is 0.4mm
Sleeve- edge provides reference
to make measurements
Coil Spring; provides constant probing force
Computer for data storage.
26.
27. • Disadvantages of Florida probe.
Lack of tactile sensitivity
Fixed probing force
Underestimation of deep periodontal pockets.
Other electronic probes:
Improvised Florida PASHA probe
Interprobe
Perioprobe
Foster Miller probe
Toronto Automated ( difficult to reproduce patient head
position and in 2nd and 3rd Molar area.)
28. PSR system
• To screen dental patients to facilitate the detection of mild
forms of periodontal diseases and to identify individuals who
have previously undetected periodontitis.
• It is designed for general dental practitioner to identify the
patient’s requiring periodontal care and to determine the type
of care required.
29. • Based on the worst site per sextant.
• If one or more sextants show significant signs of disease,
clinician is advised to do a complete periodontal examination
and charting
30. Advances in Radiographic Assessment
• Dental Radiography are traditional method to assess
destruction of alveolar bone.
• Problems with conventional Radiography:
Variation in projection geometry
Variation in contrast and density
Masking by other anatomic structures.
They are very specific but lack sensitivity.
31. Digital Radiography
• Computerized images.
• Image property almost equal to conventional radiographs
• 1/3rd to half reductions in radiation dose.
32. Substraction Radiography
• Well established in medicine
• Introduced in Periodontal diagnosis
• Principle: Serial radiographs converted to digital images
superimposed composite image– Quantitative changes
• Changes in density and volume of bone
a. can be detected as lighter areas (bone gain)
b. Dark areas (bone loss)
33. • Perfect accuracy at a lesion depth of 0.49 mm
( Grondhal et al 1988)
• Limitations: needs paralleling technique and accurate
superimposition.
34. Diagnostic Subtraction Radiography
• Positioning device during film exposure
specialized software designed for digital image subtraction
using conventional personal computers
• Applies an algorithm that corrects for the effects of angular
alignment discrepencies and provides some degree of
flexibility in imaging procedure
35. Computer Assisted Densitometric Image Analysis
(CADIA)
Video cameras
measures
light transmitted through Radiographs
signals from camera
converted into
gray scale images
camera interfaced with image processor
+ computer
36. • Offers objective method for following alveolar bone density
changes quantitatively over time.
• Higher sensitivity
• High degree of reproducibility
• accuracy
38. • A thin fan beam of X-Rays rotates around the patient to
generate in one resolution a thin axial slice of the area of
interest.
• Multiple overlapping axial slices are obtained by several
revolution of the X-ray beam until the whole area of interest is
covered.
• With the help of a computer and sophisticated Algorithms
these slices are then used to generate a three dimensional
digital map of the jaw which help in evaluation of the implant
patient.
39. • Specialized software can be used to generate appropriate views
that best depict the dimensions of the jaws and the location of
important anatomic structures.
• DENTAL VIEWS OBTAINED FROM A CT SCAN
INCLUDE:-
» 1. AXIAL
» 2. PANORAMIC
» 3. CROSS-SECTIONAL. Views of the Jaws.
40.
41. ADVANTAGES of Computed Tomography
1. True cross sections offer a precise and detailed
evaluation of the height and width of the ALVEOLAR
RIDGE.
2. The images can be adjusted and printed without
magnification, facilitating measurements directly on the
prints or films with standard rulers.
3. Various anatomic structures can be visualized and
analyzed at all the Coordinate axis.
1. Superioinferior
2. Anteroposterior
3. Buccolingual
42. – Images of the entire arch several edentulous areas can be
visualized with single examination.
– The Bone and soft tissue contrast and resolution are
excellent for the diagnostic task.
43. DISADVANTAGES of Computed Tomography
specialized equipment and setting.
Radiologists and Technicians need to be knowledgeable
of the anatomy, anatomic variants and pathology of the
jaws as well as considerations pertinent implant treatment
planning.
higher radiation dose to the patient as compared to other
modalities used during implant treatment planning.
it delivers radiation to whole arch.
Metallic Restorations can cause ring artifacts that impair
the diagnostic quality of the image, it is challenging to the
patients having heavy metallic restored dentition.
44. CONE-BEAM COMPUTED TOMOGRAPHY
• Cone-Beam Computed Tomography (CBCT) is a new
imaging modality that offers significant advantages for the
evaluation of implant patients.
45. • The 3- D CBCT images canbe combined with high precision
3D visible light (photographic) surface images to create a
virtual patient that accurately displays both hard and soft tissue
structures.
• This multi- modal image image visualization enables a
treatment platform that allows assessment of the patient’s
present condition, planning and stimulation of treatment
options, progress monitoring and evaluation of outcomes.
46. Advances in Microbiologic Analysis
• Strong evidence for actinomycetemcomitans (Aa),
Porphyromonas gingivalis (Pg), and Tannerella forsythia
(Tf).
• Other organisms that are thought to have etiologic role are
Camphylobacter rectus, Eubaterium nodatum,
Fusobacterium nucleatum, Peptostreptococcus micros,
Prevetolla intermedia and Prevetolla nigrescens,
Trepenoma Denticola
47. • Microbiologic tests( that can identify)
a. Can support diagnosis of various Periodontal disease.
b. Can tell about initiation & progression
c. Active & Inactive
d. Can also be used to monitor Periodontal therapy
whether it is suppressed/ eradicated.
• Several studies
(-)nce of Pathogens better periodontal health
(+)nce of pathogens periodontal disease
48. • Bacterial culturing
• Direct microscopy
• Immunodiagnostic methods
• Enzymatic methods
• Diagnostic assays based on molecular biologic techniques
49. Bacterial culturing
• Historically, widely used in characterizing composition of
subgingival microflora.
• Plaque sample anaerobic culture
selective non-selective
Advantage: 1. clinician can obtain absolute or relative count
2. invitro method for antibiotic susceptibility
50. • Limitations :
i. Culture can grow only live bacteria.
ii. Sensitivity is low
iii. Requires sophisticated equipment and experienced personnel.
iv. Time consuming
v. expensive
51. Direct microscopy
• Dark field
Direct microscopy alternative to culture methods
• Ability to assess morphology
& motility in plaque.
• Dark field microscopy seems an unlikely candidate as a
diagnostic test of destructive periodontal diseases.
52. Immunodiagnostic methods
• It employs Antibody
that recognize
specific bacterial antigen
• Various procedures:
a. Direct & indirect immunofluorescence assays
b. Flow cytometry
c. ELISA
d. Membrane assay
e. Latex agglutination
53. Immunofluorescence assay
• Direct IFA: AB conjugated with Fluorescein marker +
Bacteria ( Antigen) = Immuno complex
• Indirect IFA: Primary AB + Bacteria= Immune Complex+
Secondary Fl conjugated AB
55. Cytofluorography/ Flow cytometry
Bacterial cells+ species specific AB
+ Secondary FL Conjugated AB
Introduced in flowcytometer
Bacterial cells is separated into
single cell suspension-
passes through the tube
Cells identified by lasers
56. • merits :
rapid identification
labels bacterial cells species specific antibody
fluorescin conjugated secondary
antibody
• Demerits:
sophistication
expensive
57. ELISA= Enzyme Linked Immunosorbent Assay
Similar AB and Antigen reaction, but the fluorescence is read
using a photometer.
Evalusite: commercially available kit to detect Aa,Pg and Pi.
58.
59. Well with precoated antibody + Sample
to be tested= immune complex
Specific antigen bind to the antibody +
Secondary antibody added.
Immunofloresence dye bound to
secondary antibody
Substrate added which changes the
color of the solution
Amount of florescence checked by
photometer (450nm)
60. • Latex Agglutination Test
Latex beads coated with species specific AB when beads come
in contact with specific species in sample they bind and
agglutination occurs clumping of beads is visible test
positive.
Advantages:
Simple and Rapid testing
Higher sensitivity and specificity.
61. Enzymatic methods
• Bacteria release specific enzymes. Certain group of species
share common enzymatic profile.
e.g. Tf, PG, Td, and Capnocytophaga species release trypsin
like enzyme.
• Enyme hydrolyses specific substrate (BANA) release
cromophore ( B-naphtalamide) Cromophore changes color
on addition of a substance( fast garnet)
62. Perioscan is a popular diagnostic kit uses BANA reaction.
Disadvantage:
May be positive in clinically healthy site
Cannot detect disease activity
Limited organisms detected
Other pathogens may be present if it’s negative.
63. Molecular Biology Techniques
• Basic Principle: Analysis of DNA, RNA and protein structure.
Hybridization: Pairing of complimentary strands of DNA to
produce a double stranded DNA
.
Nucleic acid probe: is a known DNA/RNA which is synthesized
artificially and labeled with a enzyme or a radioisotope for
detection when placed in a plaque sample
64. DNA Probe: uses a segment of a
single stranded DNA, labeled
with a enzyme of a radio
isotope, that is able to hybridize
to a complimentary nuclei
strand, and thus detect presence
of target microorganism.
65. DNA Probe
Whole genomic: Targets the whole DNA strand rather then a
specific sequence or gene.
High chances to cross react with non target microorganism
Lower sensitivity and specificity.
67. • Checkerboard DNA-DNA Hybridization Technology:
Developed by Socransky et.al.
40 bacterial species can be detected using whole genomic
digoxigenin-labeled DNA probes.
Large number of samples can be tested and upto 40 oral species
detected with a single test.
68. Advantages of DNA probes as compared to bacterial
culturing.
1. More sensitive and specific
2. Requires as less as 104 cells of each species to be
detected.
3. Multiple species detected with a single test
4. Does not require viable bacteria
5. Large number of samples can be assessed.
Disadvantage:
1. Expensive
2. Expert personnel to carry out the test
3. Not easily available
69. • Polymerase Chain Reaction (PCR):
Involves amplification of a region of DNA by a primer specific to
the target species.
If there is amplification then it indicates the presence of the target
species in the sample.
70. Advantages:
1. High detection limit. As less as 5- 10 cells can be
amplified and detected.
2. Less cross reactivity under optimal conditions
3. Many species can be detected simultaneously
Disadvantage:
1. Small quantity needed for reaction may not contain the
necessary target DNA
2. Plaque may contain enzymes which may inhibit these
reactions.
71. Advances in characterizing the host response
• Diagnostic tests have been developed that add measures of the
inflammatory process to conventional clinical measures.
• These diagnostic tests gives information about
pattern of destruction
current activity of disease
rate of disease progression
extent & severity of further breakdown
response to therapy
72. • So, knowing about disease destructive process-
clinician can individualise their therapeutic approach,
and customize the treatment.
• Source of samples may be; GCF, Saliva, or Blood.
• GCF is most commonly used, where as saliva is recently been
researched.
• Assessment of Host response
i. Inflammatory mediators and products
ii. Host derived enzymes
iii. Tissue breakdown products
73. Inflammatory mediators & products:
• Cytokines- potent local mediators of inflammation
produced by variety of cells
• GCF- TNF α
IL-1
IL-6
IL-8
• Good correlation with disease status and severity but not
disease progression
74. • In untreated periodontitis- concentration of PGE2 increased
during active phase of periodontal destruction.
• Cytokines ∞ disease severity & status
• PGE2 ∞ active phase of periodontal disease
75. Host derived enzymes:
• Matrix components are dissolved by either
a. ECM metalloproteinase dependent
b. Plasmin dependent cleavage reactions
• Proteases and enzymes involved in these processes may be
used as diagnostic aids.
78. For periodontal diagnosis, the ideal diagnostic test should be
• Quantitative.
• Highly sensitive method capable of analyzing a single
periodontal site in health as well as disease.
• Reproducible.
• Highly specific.
• Simple to perform.
• A rapid, one or two stage procedure.
• Non-invasive.
• Versatile in terms of sample handling, storage and transport.
• Amendable to chairside use.
• Economical. ( Chapple 1997)
79. Chairside periodontal test kits can be categorized as
• Microbiologic tests
• Biochemical test kits
• Genetic kits
Microbiological test kits
The bacteriological tests
(Microscopy, Culture, Omnigene, Affirm DP and Evalusite) are
mainly aimed at spirochetes, Aa, Pg and Pi.
Microbial tests can also be used to monitor periodontal therapy
directed towards the suppression or eradication of
periodontopathogenic microorganisms
80. Omnigene
• DNA probe systems
• available for the detection of A. actinomycetemcomitans, P.
gingivalis, P. intermedia, F. nucleatum, C. rectus, T. denticola
and E. corrodens.
81. Evalusite
• Evalusite is a kit that employs a novel membrane-based
enzyme immunoassay for the detection of three putative
periodontopathogens: Aa, Pg and Pi.
• a pink spot is displayed if the test organism is present.
• The main weaknesses of this test kit reside in
• 1) the assumption that the three detected organisms are
causing disease;
• (2) it is a multistage test;
• (3) it has a subjective calorimetric end point and (4) there is no
permanent record of the results.
82. PerioScan®
• Perioscan is a diagnostic test kit that utilizes the BANA (N-
benzoyl-DL-arginine-2-naphthylamide)-hydrolysis reaction,
• developed to detect bacterial trypsin-like proteases in the
dental plaque
83. Biochemical test kits
• Perio 2000- to evaluate VSCs
• Prognos- Stik- to detect elevated levels of MMPs
• Perio- Check- to measure neutral protease activity
• PerioGard- to detect AST
• Pocket Watch- simple method for AST
84. Genetic test kits
• Various gene polymorphisms are considered to be risk factors
for the initiation or progression of periodontal disease.
• In 1997, Kornman et al. found an association between the
polymorphism in the genes encoding for interleukin-1α and
interleukin-1β and increased severity of periodontitis.
• PST® genetic susceptibility test - the first and only genetic
test that analyzes two interleukins (IL-1α and IL-1β) genes for
variations. IL-1 genetic susceptibility may not initiate or cause
the disease but rather may lead to earlier or more severe
disease
85. Salivary diagnostics
• OralDNA® Labs has developed a salivary test, the
MyPerioID® PST®, that identifies a patient’s genetic
susceptibility and inherent risk to periodontal disease by
evaluating their interleukin-1 (IL-1) gene cluster,
• MyPerioPath®, that identifies the type and concentration of
13 pathogenic bacteria known to cause periodontal disease.
86. Conclusion
• In periodontology, the success of any treatment is dependent
upon the accuracy of the initial diagnosis.
• At present, the majority of chronic periodontitis cases can be
adequately managed using existing diagnostic methodology,
although it is clearly more desirable to be able to diagnose
“active disease” as it occurs, rather than months later.
• However, the clinician must ensure that the use of such tests
will benefit the patients in terms of both the value of
diagnostic data obtained and the cost in time and money.
87. References
• Carranza’s Clinical Periodontology 10th and 11th edition.
• Armitage GC, Jeffcoat MK, Chadwick DE: longitudinal
evaluation of elastase as a marker for the progression of
Periodontitis, J Periodontol 1994; 65:120.
• Beck JD: Issues in assessment of diagnostic tests and risk for
Periodontal diseases, Periodontol 2000;7:100