From the previous couple of decades no of endeavours have made by scientists to upgrade the rate of heat transfer with the utilization of fins by differing number of parameters. The parameters like fin geometries, fin spacing, temperature dissemination, height, length have been explored in this paper. The paper gives some short audits about the methods for improving the rate of heat transfer by use of fins. Principle thought process of the paper is to give some concise information about the efficiency enhancements that can be made in fins to improve heat transfer rate. Naveen Kumar | Udit Singhal "A Review Paper on Fin Efficiency Enhancement" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29543.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29543/a-review-paper-on-fin-efficiency-enhancement/naveen-kumar
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
FLUID FLOW ANALYSIS IN AIR DUCT FLOW WITH AND WITHOUT INTERNAL THREADS USING ...IAEME Publication
Computational heat transfer flow modeling is one of the great challenges in the classical sciences. As with most problems in engineering, the interest in the heat transfer augmentation is increasing due to its extreme importance in various industrial applications. This paper deals with the analysis of heat transfer for fluid flowing through the pipe with and without internal threads using CFD. Using CFD codes for modeling the heat and fluid flow is an efficient tool for predicting equipment performance. CFD offers a convenient means to study the detailed flows and heat exchange processes, which take place inside the tube. Simulations were carried out using commercial CFD software ANSYS Fluent version 14.5. Friction factor and Nusselt number for air flowing through the specified tube (internal diameter = 0.005 m, length = 0.1 m) were obtained first for the plain tube and then for the tube with internal threads with pitch 5mm in the Reynolds number range of 2000 to 5000. Finally results will be compared to available experimental and analytical calculations. The data obtained by simulation are matching with the literature value for a plain tube with the discrepancy of less than plus or minus 5% for Nusselt number and for the friction factor.
Enhanced heat transfer for the tube with internal threads has been observed. Heat flux is more uniform all along the tube and decreases uniformly towards the center.
Performance evaluations of two pass solar air heater using 60â° inclinedv-sh...inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
CFD Analysis of Plate Fin Tube Heat Exchanger for Various Fin InclinationsIJERA Editor
ANSYS Fluent software is used for three dimensional CFD simulations to investigate heat transfer and fluid flow characteristics of six different fin angles with plain fin tube heat exchangers. The numerical simulation of the fin tube heat exchanger was performed by using a three dimensional numerical computation technique. Geometry of model is created and meshed by using ANSYS Workbench software. To solve the equation for the fluid flow and heat transfer analysis ANSYS FLUENT was used in the fin-tube heat exchanger. The fluid flow and heat transfer are simulated and result compared for both laminar and turbulent flow models k-epsilon and SST k-omega, with steady state solvers to calculate heat transfer, flow velocity and temperature fields of variable inclined fin angles (Ɵ = 00,100 , 200, 300, 400,500). Model is validate by comparing the simulated value of velocity, temperature and colburn factor with experimental and numerical results investigated by WANG [1] and GHORI KIRAR [10]. Reasonable agreement is found between the simulations and other results, and the ANSYS Fluent software is sufficient for simulating the flow fields in tube fin heat exchanger.
Experimental study on heat transfer and friction factor characteristics in la...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Analysis of Coiled-Tube Heat Exchangers to Improve Heat Transfer Rate With Sp...IJMER
Steady heat transfer enhancement has been studied in helically coiled-tube heat exchangers. The outer side of the wall of the heat exchanger contains a helical corrugation which makes a helical rib on the inner side of the tube wall to induce additional swirling motion of fluid particles. Numerical calculations have been carried out to examine different geometrical parameters and the impact of flow and thermal boundary conditions for the heat transfer rate in laminar and transitional flow regimes. Calculated results have been compared to existing empirical formula and experimental tests to investigate the validity of the numerical results in case of common helical tube heat exchanger and additionally results of the numerical computation of corrugated straight tubes for laminar and transition flow have been validated with experimental tests available in the literature. Comparison of the flow and temperature fields in case of common helical tube and the coil with spirally corrugated wall configuration are discussed. Heat exchanger coils with helically corrugated wall configuration show 80–100% increase for the inner side heat transfer rate due to the additionally developed swirling motion while the relative pressure drop is 10–600% larger compared to the common helically coiled heat exchangers. New empirical Co-relation has been proposed for the fully developed inner side heat transfer prediction in case of helically corrugated wall configuration.
Comparative Study and Analysis between Helical Coil and Straight Tube Heat Ex...IJERA Editor
The purpose of this study is to determine the relative advantage of using a helically coiled heat exchanger against a straight tube heat exchanger. It is found that the heat transfer in helical circular tubes is higher as compared to Straight tube due to their shape. Helical coils offer advantageous over straight tubes due to their compactness and increased heat transfer coefficient. The increased heat transfer coefficients are a consequence of the curvature of the coil, which induces centrifugal forces to act on the moving fluid, resulting in the development of secondary flow. The curvature of the coil governs the centrifugal force while the pitch (or helix angle) influences the torsion to which the fluid is subjected to the centrifugal force results in the development of secondary flow. Due to the curvature effect, the fluid streams in the outer side of the pipe moves faster than the fluid streams in the inner side of the pipe. In current work the fluid to fluid heat exchange is taken into consideration. Most of the investigations on heat transfer coefficients are for constant wall temperature or constant heat flux. The effectiveness, overall heat transfer coefficient, effect of cold water flow rate on effectiveness of heat exchanger when hot water mass flow rate is kept constant and effect of hot water flow rate on effectiveness when cold water flow rate kept constant studied and compared for parallel flow, counter flow arrangement of Helical coil and Straight tube heat exchangers. All readings were taken at steady state condition of heat exchanger. The result shows that the heat transfer coefficient is affected by the geometry of the heat exchanger. Helical coil heat exchanger are superior in all aspect studied here.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
FLUID FLOW ANALYSIS IN AIR DUCT FLOW WITH AND WITHOUT INTERNAL THREADS USING ...IAEME Publication
Computational heat transfer flow modeling is one of the great challenges in the classical sciences. As with most problems in engineering, the interest in the heat transfer augmentation is increasing due to its extreme importance in various industrial applications. This paper deals with the analysis of heat transfer for fluid flowing through the pipe with and without internal threads using CFD. Using CFD codes for modeling the heat and fluid flow is an efficient tool for predicting equipment performance. CFD offers a convenient means to study the detailed flows and heat exchange processes, which take place inside the tube. Simulations were carried out using commercial CFD software ANSYS Fluent version 14.5. Friction factor and Nusselt number for air flowing through the specified tube (internal diameter = 0.005 m, length = 0.1 m) were obtained first for the plain tube and then for the tube with internal threads with pitch 5mm in the Reynolds number range of 2000 to 5000. Finally results will be compared to available experimental and analytical calculations. The data obtained by simulation are matching with the literature value for a plain tube with the discrepancy of less than plus or minus 5% for Nusselt number and for the friction factor.
Enhanced heat transfer for the tube with internal threads has been observed. Heat flux is more uniform all along the tube and decreases uniformly towards the center.
Performance evaluations of two pass solar air heater using 60â° inclinedv-sh...inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
CFD Analysis of Plate Fin Tube Heat Exchanger for Various Fin InclinationsIJERA Editor
ANSYS Fluent software is used for three dimensional CFD simulations to investigate heat transfer and fluid flow characteristics of six different fin angles with plain fin tube heat exchangers. The numerical simulation of the fin tube heat exchanger was performed by using a three dimensional numerical computation technique. Geometry of model is created and meshed by using ANSYS Workbench software. To solve the equation for the fluid flow and heat transfer analysis ANSYS FLUENT was used in the fin-tube heat exchanger. The fluid flow and heat transfer are simulated and result compared for both laminar and turbulent flow models k-epsilon and SST k-omega, with steady state solvers to calculate heat transfer, flow velocity and temperature fields of variable inclined fin angles (Ɵ = 00,100 , 200, 300, 400,500). Model is validate by comparing the simulated value of velocity, temperature and colburn factor with experimental and numerical results investigated by WANG [1] and GHORI KIRAR [10]. Reasonable agreement is found between the simulations and other results, and the ANSYS Fluent software is sufficient for simulating the flow fields in tube fin heat exchanger.
Experimental study on heat transfer and friction factor characteristics in la...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Analysis of Coiled-Tube Heat Exchangers to Improve Heat Transfer Rate With Sp...IJMER
Steady heat transfer enhancement has been studied in helically coiled-tube heat exchangers. The outer side of the wall of the heat exchanger contains a helical corrugation which makes a helical rib on the inner side of the tube wall to induce additional swirling motion of fluid particles. Numerical calculations have been carried out to examine different geometrical parameters and the impact of flow and thermal boundary conditions for the heat transfer rate in laminar and transitional flow regimes. Calculated results have been compared to existing empirical formula and experimental tests to investigate the validity of the numerical results in case of common helical tube heat exchanger and additionally results of the numerical computation of corrugated straight tubes for laminar and transition flow have been validated with experimental tests available in the literature. Comparison of the flow and temperature fields in case of common helical tube and the coil with spirally corrugated wall configuration are discussed. Heat exchanger coils with helically corrugated wall configuration show 80–100% increase for the inner side heat transfer rate due to the additionally developed swirling motion while the relative pressure drop is 10–600% larger compared to the common helically coiled heat exchangers. New empirical Co-relation has been proposed for the fully developed inner side heat transfer prediction in case of helically corrugated wall configuration.
Comparative Study and Analysis between Helical Coil and Straight Tube Heat Ex...IJERA Editor
The purpose of this study is to determine the relative advantage of using a helically coiled heat exchanger against a straight tube heat exchanger. It is found that the heat transfer in helical circular tubes is higher as compared to Straight tube due to their shape. Helical coils offer advantageous over straight tubes due to their compactness and increased heat transfer coefficient. The increased heat transfer coefficients are a consequence of the curvature of the coil, which induces centrifugal forces to act on the moving fluid, resulting in the development of secondary flow. The curvature of the coil governs the centrifugal force while the pitch (or helix angle) influences the torsion to which the fluid is subjected to the centrifugal force results in the development of secondary flow. Due to the curvature effect, the fluid streams in the outer side of the pipe moves faster than the fluid streams in the inner side of the pipe. In current work the fluid to fluid heat exchange is taken into consideration. Most of the investigations on heat transfer coefficients are for constant wall temperature or constant heat flux. The effectiveness, overall heat transfer coefficient, effect of cold water flow rate on effectiveness of heat exchanger when hot water mass flow rate is kept constant and effect of hot water flow rate on effectiveness when cold water flow rate kept constant studied and compared for parallel flow, counter flow arrangement of Helical coil and Straight tube heat exchangers. All readings were taken at steady state condition of heat exchanger. The result shows that the heat transfer coefficient is affected by the geometry of the heat exchanger. Helical coil heat exchanger are superior in all aspect studied here.
DETERMINATION OF THE TEMPERATURE DISTRIBUTION THE PERFORATED FINS UNDER NATUR...Ozyegin University
This work treats the problem of heat transfer for perforated fins under natural convection. The temperature distribution is examined for an array of rectangular fins (15 fins) with uniform cross-sectional area (100x270 mm) embedded with various vertical body perforations that extend through the fin thickness. The patterns of perforations include 18 circular perforations (holes). Experiments were carried out in an experimental facility that was specifically design and constructed for this purpose. The heat transfer rate and the coefficient of heat transfer increases with perforation diameter increased.
KEYWORDS: Perforated Fins, Temperature Distribution, Natural Convection.
DETERMINATION OF THE TEMPERATURE DISTRIBUTION THE PERFORATED FINS UNDER NATUR...Ozyegin University
This work treats the problem of heat transfer for perforated fins under natural convection. The temperature distribution is examined for an array of rectangular fins (15 fins) with uniform cross-sectional area (100x270 mm) embedded with various vertical body perforations that extend through the fin thickness. The patterns of perforations include 18 circular perforations (holes). Experiments were carried out in an experimental facility that was specifically design and constructed for this purpose. The heat transfer rate and the coefficient of heat transfer increases with perforation diameter increased
Assessment of thermo-hydraulic performance of inward dimpled tubes with varia...CFD LAB
This paper presents a numerical investigation and assessment of thermal and hydraulic performance of dimpled
tubes of varying topologies at constant heat flux of 10 kW m2 and Reynolds numbers ranging from 2300 to
15,000. The performance of the tubes consisting of conical, spherical and ellipsoidal dimples with equivalent
flow volumes were compared using steady state Reynolds Averaged Navier Stokes simulations. The ellipsoidal
dimples, in comparison to other dimple shapes, demonstrated large increment in heat transfer rate. The variation
in the orientation of the ellipsoidal dimples was examined to further improve thermal and hydraulic performances of the tube. A 45° inclination angle of ellipsoidal dimple, from its major axis, increased the thermohydraulic performance by 58.1% and 20.2% in comparison to smooth tube and 0° ellipsoidal dimpled tube,
respectively. Furthermore, Large Eddy Simulations (LES) were carried out to investigate the role geometrical
assistance to fluid flow and heat transfer enhancement for the 45° and 90° ellipsoidal dimpled tubes. LES results
revealed a flow channel of connected zones of wakes which maximized fluid-surface contact and therefore
enhanced the thermal performance of the tube. In addition, correlations for Nusselt number and friction factor
for all angular topologies of ellipsoidal dimpled tube have been proposed.
Heat transfer enhancement and friction factor analysis in tube using conical ...eSAT Journals
Abstract Role of the conical spring array for the heat transfer enhancement and pressure drop change in a pipe with constant heat flux boundary condition was investigated. Three different arrangements of conical spring array inserts were used in the experimental setup. Conical spring inserts with diverging conical spring, converging-diverging conical spring and converging conical spring array inserts arrangements were used. Water was used as a working fluid in the experimental setup. It was found that use of conical spring array inserts arrangement leads to enhancement in heat transfer. Higher heat transfer rate was achieved in the divergent spring array arrangement than the converging-diverging and converging arrangement. However, maximum friction factor is achieved in the diverging spring array insert arrangement. By increasing the Reynolds Number for different turbulator arrangement, the significant increase in Nusselt number was obtained. The enhancement in Nusselt Number for the diverging, converging-diverging, converging conical spring array arrangement was 645% ,431% and 259% respectively. The heat transfer enhancement efficiency can be evaluated based on the power consumption per unit mass of fluid. Heat transfer enhancement efficiencies were found for the divergent spring array arrangement up to 277% and for the convergent-divergent spring arrangement up to 212% and for the convergent spring array arrangement up to 153%. Keywords— Heat exchanger, Heat transfer enhancement, Friction factor, Conical spring turbulator, Heat transfer enhancement efficiency
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EXPERIMENTAL STUDY OF HEAT TRANSFER FROM PLATE FIN ARRAY IN MIXED CONVECTION ...ijiert bestjournal
The work summarized in this paper presents an exper imental study of heat transfer from plate fin in mixed convection mode enhancement by the us e of plate fins is presented. After a brief review of the basic methods used to enhance the hea t transfer by simultaneous increase of heat transfer surface area as well as the heat tran sfer coefficient,a simple experimental method to assess the heat transfer enhancement is p resented. The method is demonstrated on plate fins as elements for the heat transfer enhanc ement,but it can in principle be applied also to other fin forms. That is varying various paramet ers (height,spacing). The order of the magnitude of heat transfer enhancement obtained exp erimentally,it was found that by a direct comparison of Nu and Re no conclusion regarding the relative performances could be made. This is because the dimensionless variables are int roduced for the scaling of heat transfer and pressure drop results from laboratory to large scal e but not for the performance comparison. Therefore a literature survey of the performance co mparison methods used in the past was also performed. Experiments will carried out on mix ed convection heat transfer from plate fin heat sinks subject to the influence of its geometry and heat flux. A total of 9 plate fins were pasted into the upper surface of the base plate. Th e area of the base plate is 150mm by 150mm. The base plate and the fins were made of alu minum. For all tested plate fin heat sinks,however,the heat transfer performance for h eat sinks with plate fins was better than that of solid pins.
experimental investigation of heat transfer intensification of pin fins under...INFOGAIN PUBLICATION
Recent development era in technology has huge requirement of high performance lightweight, and compact heat transfer equipment. To accomplish this demand fins are widely used as effective elements for heat transfer enhancement. One of the commonly used heat exchanger fins is the pin fin which offers an economical and trouble free solution in many situations. This is more important in cooling of air conditioning equipment, thermal power plants, gas turbine blade, aerospace industry, combustion chamber liners, and biomedical devices, electrical and electronic component. Therefore now a day’s industries are utilizing thermal system with pin fins and analyse the various influencing parameters on performance of pin fin of different geometry under force convection. The turbulence occurred due to these techniques are good enough to enhance heat transfer rate. This article is focused on comprehensive review of work carried out in this technology.
Performance Evaluation of Plate-Fin-And Tube Heat Exchanger with Wavy Fins- A...IJERA Editor
The plate fin-and-tube heat exchangers are widely used in variety of industrial applications, particularly in the heating, air-conditioning and refrigeration, HVAC industries. In most cases the working fluid is liquid on the tube side exchanging heat with a gas, usually air. It is seen that the performance of heat exchangers can be greatly increased with the use of unconventionally shaped flow passages such as plain, perforated offset strip, louvered, wavy, vortex generator and pin. The current study is focused on wavy-fin. The wavy surface can lengthen the path of airflow and cause better airflow mixing. In order to design better heat exchangers and come up with efficient designs, a thorough understanding of the flow of air in these channels is required. Hence this study focuses on the heat transfer and friction characteristics of the air side for wavy fin and tube heat exchanger.
CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchang...ijtsrd
The flow properties of heat transfer across such corrugated channels are very distinct from parallel plate channels. The primary flow direction is parallel to the waviness of the channel of the corrugated channel, although the local flow direction is still changed due to the waviness of the channel. By flow recirculation, separation and re attachment, the thermal boundary layer formed on its walls is regularly disrupted and the convective heat transfer coefficient is thus increased. In this work, in corrugated channels, the convective heat transfer and pressure drop characteristics of flow have been tested numerically. On channels of uniform heat flux and fixed corrugation over a Reynolds number spectrum, 10000 = Re = 30000, numerical research was conducted. The impacts of channel configuration, variation in Reynold’s number, and concentration variations of nanoparticles in base fluid on heat transfer are discussed. As opposed to the traditional corrugated channel, a major heat transfer gain was associated with the proposed corrugated channel. Based on the nanofluid concentration, Reynold number and channel configuration of the corrugated channel, the average Nusselt number increased by a factor of 2.2 up to 2.8 compared to that of the semi circular corrugated channel. Compared with the effect of channel configuration variation, triangular corrugated channel was the best Nusselt numbers, followed by the shape Semi circular Triangular , and Semi circular corrugated channel with the lowest results. Prof. Pushparaj Singh | Rishi Kesh Jha "CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchanger using Different Corrugated Channel Configurations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35706.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35706/cfd-analysis-for-heat-transfer-enhancement-of-a-corrugated-plate-heat-exchanger-using-different-corrugated-channel-configurations/prof-pushparaj-singh
DETERMINATION OF THE TEMPERATURE DISTRIBUTION THE PERFORATED FINS UNDER NATUR...Ozyegin University
This work treats the problem of heat transfer for perforated fins under natural convection. The temperature distribution is examined for an array of rectangular fins (15 fins) with uniform cross-sectional area (100x270 mm) embedded with various vertical body perforations that extend through the fin thickness. The patterns of perforations include 18 circular perforations (holes). Experiments were carried out in an experimental facility that was specifically design and constructed for this purpose. The heat transfer rate and the coefficient of heat transfer increases with perforation diameter increased.
KEYWORDS: Perforated Fins, Temperature Distribution, Natural Convection.
DETERMINATION OF THE TEMPERATURE DISTRIBUTION THE PERFORATED FINS UNDER NATUR...Ozyegin University
This work treats the problem of heat transfer for perforated fins under natural convection. The temperature distribution is examined for an array of rectangular fins (15 fins) with uniform cross-sectional area (100x270 mm) embedded with various vertical body perforations that extend through the fin thickness. The patterns of perforations include 18 circular perforations (holes). Experiments were carried out in an experimental facility that was specifically design and constructed for this purpose. The heat transfer rate and the coefficient of heat transfer increases with perforation diameter increased
Assessment of thermo-hydraulic performance of inward dimpled tubes with varia...CFD LAB
This paper presents a numerical investigation and assessment of thermal and hydraulic performance of dimpled
tubes of varying topologies at constant heat flux of 10 kW m2 and Reynolds numbers ranging from 2300 to
15,000. The performance of the tubes consisting of conical, spherical and ellipsoidal dimples with equivalent
flow volumes were compared using steady state Reynolds Averaged Navier Stokes simulations. The ellipsoidal
dimples, in comparison to other dimple shapes, demonstrated large increment in heat transfer rate. The variation
in the orientation of the ellipsoidal dimples was examined to further improve thermal and hydraulic performances of the tube. A 45° inclination angle of ellipsoidal dimple, from its major axis, increased the thermohydraulic performance by 58.1% and 20.2% in comparison to smooth tube and 0° ellipsoidal dimpled tube,
respectively. Furthermore, Large Eddy Simulations (LES) were carried out to investigate the role geometrical
assistance to fluid flow and heat transfer enhancement for the 45° and 90° ellipsoidal dimpled tubes. LES results
revealed a flow channel of connected zones of wakes which maximized fluid-surface contact and therefore
enhanced the thermal performance of the tube. In addition, correlations for Nusselt number and friction factor
for all angular topologies of ellipsoidal dimpled tube have been proposed.
Heat transfer enhancement and friction factor analysis in tube using conical ...eSAT Journals
Abstract Role of the conical spring array for the heat transfer enhancement and pressure drop change in a pipe with constant heat flux boundary condition was investigated. Three different arrangements of conical spring array inserts were used in the experimental setup. Conical spring inserts with diverging conical spring, converging-diverging conical spring and converging conical spring array inserts arrangements were used. Water was used as a working fluid in the experimental setup. It was found that use of conical spring array inserts arrangement leads to enhancement in heat transfer. Higher heat transfer rate was achieved in the divergent spring array arrangement than the converging-diverging and converging arrangement. However, maximum friction factor is achieved in the diverging spring array insert arrangement. By increasing the Reynolds Number for different turbulator arrangement, the significant increase in Nusselt number was obtained. The enhancement in Nusselt Number for the diverging, converging-diverging, converging conical spring array arrangement was 645% ,431% and 259% respectively. The heat transfer enhancement efficiency can be evaluated based on the power consumption per unit mass of fluid. Heat transfer enhancement efficiencies were found for the divergent spring array arrangement up to 277% and for the convergent-divergent spring arrangement up to 212% and for the convergent spring array arrangement up to 153%. Keywords— Heat exchanger, Heat transfer enhancement, Friction factor, Conical spring turbulator, Heat transfer enhancement efficiency
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EXPERIMENTAL STUDY OF HEAT TRANSFER FROM PLATE FIN ARRAY IN MIXED CONVECTION ...ijiert bestjournal
The work summarized in this paper presents an exper imental study of heat transfer from plate fin in mixed convection mode enhancement by the us e of plate fins is presented. After a brief review of the basic methods used to enhance the hea t transfer by simultaneous increase of heat transfer surface area as well as the heat tran sfer coefficient,a simple experimental method to assess the heat transfer enhancement is p resented. The method is demonstrated on plate fins as elements for the heat transfer enhanc ement,but it can in principle be applied also to other fin forms. That is varying various paramet ers (height,spacing). The order of the magnitude of heat transfer enhancement obtained exp erimentally,it was found that by a direct comparison of Nu and Re no conclusion regarding the relative performances could be made. This is because the dimensionless variables are int roduced for the scaling of heat transfer and pressure drop results from laboratory to large scal e but not for the performance comparison. Therefore a literature survey of the performance co mparison methods used in the past was also performed. Experiments will carried out on mix ed convection heat transfer from plate fin heat sinks subject to the influence of its geometry and heat flux. A total of 9 plate fins were pasted into the upper surface of the base plate. Th e area of the base plate is 150mm by 150mm. The base plate and the fins were made of alu minum. For all tested plate fin heat sinks,however,the heat transfer performance for h eat sinks with plate fins was better than that of solid pins.
experimental investigation of heat transfer intensification of pin fins under...INFOGAIN PUBLICATION
Recent development era in technology has huge requirement of high performance lightweight, and compact heat transfer equipment. To accomplish this demand fins are widely used as effective elements for heat transfer enhancement. One of the commonly used heat exchanger fins is the pin fin which offers an economical and trouble free solution in many situations. This is more important in cooling of air conditioning equipment, thermal power plants, gas turbine blade, aerospace industry, combustion chamber liners, and biomedical devices, electrical and electronic component. Therefore now a day’s industries are utilizing thermal system with pin fins and analyse the various influencing parameters on performance of pin fin of different geometry under force convection. The turbulence occurred due to these techniques are good enough to enhance heat transfer rate. This article is focused on comprehensive review of work carried out in this technology.
Performance Evaluation of Plate-Fin-And Tube Heat Exchanger with Wavy Fins- A...IJERA Editor
The plate fin-and-tube heat exchangers are widely used in variety of industrial applications, particularly in the heating, air-conditioning and refrigeration, HVAC industries. In most cases the working fluid is liquid on the tube side exchanging heat with a gas, usually air. It is seen that the performance of heat exchangers can be greatly increased with the use of unconventionally shaped flow passages such as plain, perforated offset strip, louvered, wavy, vortex generator and pin. The current study is focused on wavy-fin. The wavy surface can lengthen the path of airflow and cause better airflow mixing. In order to design better heat exchangers and come up with efficient designs, a thorough understanding of the flow of air in these channels is required. Hence this study focuses on the heat transfer and friction characteristics of the air side for wavy fin and tube heat exchanger.
CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchang...ijtsrd
The flow properties of heat transfer across such corrugated channels are very distinct from parallel plate channels. The primary flow direction is parallel to the waviness of the channel of the corrugated channel, although the local flow direction is still changed due to the waviness of the channel. By flow recirculation, separation and re attachment, the thermal boundary layer formed on its walls is regularly disrupted and the convective heat transfer coefficient is thus increased. In this work, in corrugated channels, the convective heat transfer and pressure drop characteristics of flow have been tested numerically. On channels of uniform heat flux and fixed corrugation over a Reynolds number spectrum, 10000 = Re = 30000, numerical research was conducted. The impacts of channel configuration, variation in Reynold’s number, and concentration variations of nanoparticles in base fluid on heat transfer are discussed. As opposed to the traditional corrugated channel, a major heat transfer gain was associated with the proposed corrugated channel. Based on the nanofluid concentration, Reynold number and channel configuration of the corrugated channel, the average Nusselt number increased by a factor of 2.2 up to 2.8 compared to that of the semi circular corrugated channel. Compared with the effect of channel configuration variation, triangular corrugated channel was the best Nusselt numbers, followed by the shape Semi circular Triangular , and Semi circular corrugated channel with the lowest results. Prof. Pushparaj Singh | Rishi Kesh Jha "CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchanger using Different Corrugated Channel Configurations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35706.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35706/cfd-analysis-for-heat-transfer-enhancement-of-a-corrugated-plate-heat-exchanger-using-different-corrugated-channel-configurations/prof-pushparaj-singh
Heat Transfer Analysis of a Plate Heat Exchanger with a Combination of Ribs a...ijtsrd
The advancements and improvements in all heat transfer equipment’s are primarily intended to save energy and reduce project capital investment expenses energy or material . A better heat exchanger is one that can transfer a high heat rate while using a low pumping power and at a cheap cost. Passive heat transfer enhancement techniques have various benefits over other heat transfer enhancement techniques, including low cost, ease of fabrication, and installation. Rib turbulators can enhance heat transmission significantly, but they generally come at a considerable cost in terms of pressure loss. Dimple techniques have lately gained popularity because to their ability to promote heat transmission while imposing a minor pressure penalty. When dimple surfaces are mixed with nanofluids, some studies have seen increased heat transmission, but the key concern is an increase in the systems friction factor, which is also regulated within acceptable ranges. The thermal characteristics of a heat exchanger with a combination of dimple ribs were evaluated using a 3 dimensional numerical 3 D simulation. The subject of this study is the handling of air flow velocity through the channel, which was changed from 3.97 to 5.80 m s. The simulation programme ANSYS 19.2 was used to investigate the heat transfer physiognomies of a heat exchanger managing a combination of dimple ribs. The numerical findings revealed that the combination of dimple ribs greatly improved heat transmission over the dimple alone. In comparison, the average Nusselt number of a channel with dimpled Plate is 4.28 percent more than that of a channel with dimpled ribs. Prof. Pushparaj Singh | Navin Kumar "Heat Transfer Analysis of a Plate Heat Exchanger with a Combination of Ribs and Dimples using CFD" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-4 , June 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49887.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/49887/heat-transfer-analysis-of-a-plate-heat-exchanger-with-a-combination-of-ribs-and-dimples-using-cfd/prof-pushparaj-singh
Analysis of Natural Convention Heat Transfer Enhancement in Finned Tube Heat ...journal ijrtem
ABSTRACT: Most of the engineering problems require high performance heat transfer components with progressively less weight, volumes, accommodating shapes and costs. Air cooled heat exchangers are subjected to air on outer side of heat exchanger surface on in heat recovery systems like economizers gases are subjected on one side of tube surface. On air or gas side heat transfer coefficient is less. Extended surface (fins) are one of the next exchanging devices that are employed extensively to increase heat transfer rates from tubular heat exchangers. The rate of heat transfer depends on the surface area of fin available for exchanging the heat transfer rate from the primary surface of cylindrical shape. Present study focuses on enhancement of heat transfer by using both circular and elliptical type of fins. The present paper attempts to examine trend of heat transfer coefficient experimentally and by using CFD software for various types of elliptical fins with i) varying elliptical ratio, ii) changing orientation of mounting of heat exchanger tube with elliptical fins, iii) varying spacing or fin density. KEY WORDS: Natural convection, Heat transfer enhancements, Elliptical fin, Fin orientation, Fin density.
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
Study on Effect of Twisted Tape Insert Geometry in Heat Exchangerijtsrd
The heat exchanger is a device used to transfer heat from hot fluid to cold fluid. The current research reviews existing work conducted in improving performance of heat exchanger by varying geometric profile, baffling space, baffling inclination and use of helical inserts. The existing researches were conducted using both experimental and numerical techniques. The effect of operational parameters on performance of heat exchanger is also presented. Deepak Bhoi | Sudhir Singh Rajput "Study on Effect of Twisted Tape Insert Geometry in Heat Exchanger" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-2 , February 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49163.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/49163/study-on-effect-of-twisted-tape-insert-geometry-in-heat-exchanger/deepak-bhoi
Similar to A Review Paper on Fin Efficiency Enhancement (20)
‘Six Sigma Technique’ A Journey Through its Implementationijtsrd
The manufacturing industries all over the world are facing tough challenges for growth, development and sustainability in today’s competitive environment. They have to achieve apex position by adapting with the global competitive environment by delivering goods and services at low cost, prime quality and better price to increase wealth and consumer satisfaction. Cost Management ensures profit, growth and sustainability of the business with implementation of Continuous Improvement Technique like Six Sigma. This leads to optimize Business performance. The method drives for customer satisfaction, low variation, reduction in waste and cycle time resulting into a competitive advantage over other industries which did not implement it. The main objective of this paper ‘Six Sigma Technique A Journey Through Its Implementation’ is to conceptualize the effectiveness of Six Sigma Technique through the journey of its implementation. Aditi Sunilkumar Ghosalkar "‘Six Sigma Technique’: A Journey Through its Implementation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64546.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64546/‘six-sigma-technique’-a-journey-through-its-implementation/aditi-sunilkumar-ghosalkar
Edge Computing in Space Enhancing Data Processing and Communication for Space...ijtsrd
Edge computing, a paradigm that involves processing data closer to its source, has gained significant attention for its potential to revolutionize data processing and communication in space missions. With the increasing complexity and data volume generated by modern space missions, traditional centralized computing approaches face challenges related to latency, bandwidth, and security. Edge computing in space, involving on board processing and analysis of data, offers promising solutions to these challenges. This paper explores the concept of edge computing in space, its benefits, applications, and future prospects in enhancing space missions. Manish Verma "Edge Computing in Space: Enhancing Data Processing and Communication for Space Missions" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64541.pdf Paper Url: https://www.ijtsrd.com/computer-science/artificial-intelligence/64541/edge-computing-in-space-enhancing-data-processing-and-communication-for-space-missions/manish-verma
Dynamics of Communal Politics in 21st Century India Challenges and Prospectsijtsrd
Communal politics in India has evolved through centuries, weaving a complex tapestry shaped by historical legacies, colonial influences, and contemporary socio political transformations. This research comprehensively examines the dynamics of communal politics in 21st century India, emphasizing its historical roots, socio political dynamics, economic implications, challenges, and prospects for mitigation. The historical perspective unravels the intricate interplay of religious identities and power dynamics from ancient civilizations to the impact of colonial rule, providing insights into the evolution of communalism. The socio political dynamics section delves into the contemporary manifestations, exploring the roles of identity politics, socio economic disparities, and globalization. The economic implications section highlights how communal politics intersects with economic issues, perpetuating disparities and influencing resource allocation. Challenges posed by communal politics are scrutinized, revealing multifaceted issues ranging from social fragmentation to threats against democratic values. The prospects for mitigation present a multifaceted approach, incorporating policy interventions, community engagement, and educational initiatives. The paper conducts a comparative analysis with international examples, identifying common patterns such as identity politics and economic disparities. It also examines unique challenges, emphasizing Indias diverse religious landscape, historical legacy, and secular framework. Lessons for effective strategies are drawn from international experiences, offering insights into inclusive policies, interfaith dialogue, media regulation, and global cooperation. By scrutinizing historical epochs, contemporary dynamics, economic implications, and international comparisons, this research provides a comprehensive understanding of communal politics in India. The proposed strategies for mitigation underscore the importance of a holistic approach to foster social harmony, inclusivity, and democratic values. Rose Hossain "Dynamics of Communal Politics in 21st Century India: Challenges and Prospects" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64528.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/history/64528/dynamics-of-communal-politics-in-21st-century-india-challenges-and-prospects/rose-hossain
Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in...ijtsrd
Background and Objective Telehealth has become a well known tool for the delivery of health care in Saudi Arabia, and the perspective and knowledge of healthcare providers are influential in the implementation, adoption and advancement of the method. This systematic review was conducted to examine the current literature base regarding telehealth and the related healthcare professional perspective and knowledge in the Kingdom of Saudi Arabia. Materials and Methods This systematic review was conducted by searching 7 databases including, MEDLINE, CINHAL, Web of Science, Scopus, PubMed, PsycINFO, and ProQuest Central. Studies on healthcare practitioners telehealth knowledge and perspectives published in English in Saudi Arabia from 2000 to 2023 were included. Boland directed this comprehensive review. The researchers examined each connected study using the AXIS tool, which evaluates cross sectional systematic reviews. Narrative synthesis was used to summarise and convey the data. Results Out of 1840 search results, 10 studies were included. Positive outlook and limited knowledge among providers were seen across trials. Healthcare professionals like telehealth for its ability to improve quality, access, and delivery, save time and money, and be successful. Age, gender, occupation, and work experience also affect health workers knowledge. In Saudi Arabia, healthcare professionals face inadequate expert assistance, patient privacy, internet connection concerns, lack of training courses, lack of telehealth understanding, and high costs while performing telemedicine. Conclusions Healthcare practitioners telehealth perceptions and knowledge were examined in this systematic study. Its collection of concerned experts different personal attitudes and expertise would help enhance telehealths implementation in Saudi Arabia, develop its healthcare delivery alternative, and eliminate frequent problems. Badriah Mousa I Mulayhi | Dr. Jomin George | Judy Jenkins "Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in Saudi Arabia: A Systematic Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64535.pdf Paper Url: https://www.ijtsrd.com/medicine/other/64535/assess-perspective-and-knowledge-of-healthcare-providers-towards-elehealth-in-saudi-arabia-a-systematic-review/badriah-mousa-i-mulayhi
The Impact of Digital Media on the Decentralization of Power and the Erosion ...ijtsrd
The impact of digital media on the distribution of power and the weakening of traditional gatekeepers has gained considerable attention in recent years. The adoption of digital technologies and the internet has resulted in declining influence and power for traditional gatekeepers such as publishing houses and news organizations. Simultaneously, digital media has facilitated the emergence of new voices and players in the media industry. Digital medias impact on power decentralization and gatekeeper erosion is visible in several ways. One significant aspect is the democratization of information, which enables anyone with an internet connection to publish and share content globally, leading to citizen journalism and bypassing traditional gatekeepers. Another aspect is the disruption of conventional media industry business models, as traditional organizations struggle to adjust to the decrease in advertising revenue and the rise of digital platforms. Alternative business models, such as subscription models and crowdfunding, have become more prevalent, leading to the emergence of new players. Overall, the impact of digital media on the distribution of power and the weakening of traditional gatekeepers has brought about significant changes in the media landscape and the way information is shared. Further research is required to fully comprehend the implications of these changes and their impact on society. Dr. Kusum Lata "The Impact of Digital Media on the Decentralization of Power and the Erosion of Traditional Gatekeepers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64544.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64544/the-impact-of-digital-media-on-the-decentralization-of-power-and-the-erosion-of-traditional-gatekeepers/dr-kusum-lata
Online Voices, Offline Impact Ambedkars Ideals and Socio Political Inclusion ...ijtsrd
This research investigates the nexus between online discussions on Dr. B.R. Ambedkars ideals and their impact on social inclusion among college students in Gurugram, Haryana. Surveying 240 students from 12 government colleges, findings indicate that 65 actively engage in online discussions, with 80 demonstrating moderate to high awareness of Ambedkars ideals. Statistically significant correlations reveal that higher online engagement correlates with increased awareness p 0.05 and perceived social inclusion. Variations across colleges and a notable effect of college type on perceived social inclusion highlight the influence of contextual factors. Furthermore, the intersectional analysis underscores nuanced differences based on gender, caste, and socio economic status. Dr. Kusum Lata "Online Voices, Offline Impact: Ambedkar's Ideals and Socio-Political Inclusion - A Study of Gurugram District" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64543.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64543/online-voices-offline-impact-ambedkars-ideals-and-sociopolitical-inclusion--a-study-of-gurugram-district/dr-kusum-lata
Problems and Challenges of Agro Entreprenurship A Studyijtsrd
Noting calls for contextualizing Agro entrepreneurs problems and challenges of the agro entrepreneurs and for greater attention to the Role of entrepreneurs in agro entrepreneurship research, we conduct a systematic literature review of extent research in agriculture entrepreneurship to overcome the study objectives of complications of agro entrepreneurs through various factors, Development of agriculture products is a key factor for the overall economic growth of agro entrepreneurs Agro Entrepreneurs produces firsthand large scale employment, utilizes the labor and natural resources, This research outlines the problems of Weather and Soil Erosions, Market price fluctuation, stimulates labor cost problems, reduces concentration of Price volatility, Dependency on Intermediaries, induces Limited Bargaining Power, and Storage and Transportation Costs. This paper mainly devoted to highlight Problems and challenges faced for the sustainable of Agro Entrepreneurs in India. Vinay Prasad B "Problems and Challenges of Agro Entreprenurship - A Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64540.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64540/problems-and-challenges-of-agro-entreprenurship--a-study/vinay-prasad-b
Comparative Analysis of Total Corporate Disclosure of Selected IT Companies o...ijtsrd
Disclosure is a process through which a business enterprise communicates with external parties. A corporate disclosure is communication of financial and non financial information of the activities of a business enterprise to the interested entities. Corporate disclosure is done through publishing annual reports. So corporate disclosure through annual reports plays a vital role in the life of all the companies and provides valuable information to investors. The basic objectives of corporate disclosure is to give a true and fair view of companies to the parties related either directly or indirectly like owner, government, creditors, shareholders etc. in the companies act, provisions have been made about mandatory and voluntary disclosure. The IT sector in India is rapidly growing, the trend to invest in the IT sector is rising and employment opportunities in IT sectors are also increasing. Therefore the IT sector is expected to have fair, full and adequate disclosure of all information. Unfair and incomplete disclosure may adversely affect the entire economy. A research study on disclosure practices of IT companies could play an important role in this regard. Hence, the present research study has been done to study and review comparative analysis of total corporate disclosure of selected IT companies of India and to put forward overall findings and suggestions with a view to increase disclosure score of these companies. The researcher hopes that the present research study will be helpful to all selected Companies for improving level of corporate disclosure through annual reports as well as the government, creditors, investors, all business organizations and upcoming researcher for comparative analyses of level of corporate disclosure with special reference to selected IT companies. Dr. Vaibhavi D. Thaker "Comparative Analysis of Total Corporate Disclosure of Selected IT Companies of India" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64539.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64539/comparative-analysis-of-total-corporate-disclosure-of-selected-it-companies-of-india/dr-vaibhavi-d-thaker
The Impact of Educational Background and Professional Training on Human Right...ijtsrd
This study investigated the impact of educational background and professional training on human rights awareness among secondary school teachers in the Marathwada region of Maharashtra, India. The key findings reveal that higher levels of education, particularly a master’s degree, and fields of study related to education, humanities, or social sciences are associated with greater human rights awareness among teachers. Additionally, both pre service teacher training and in service professional development programs focused on human rights education significantly enhance teacher’s knowledge, skills, and competencies in promoting human rights principles in their classrooms. Baig Ameer Bee Mirza Abdul Aziz | Dr. Syed Azaz Ali Amjad Ali "The Impact of Educational Background and Professional Training on Human Rights Awareness among Secondary School Teachers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64529.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64529/the-impact-of-educational-background-and-professional-training-on-human-rights-awareness-among-secondary-school-teachers/baig-ameer-bee-mirza-abdul-aziz
A Study on the Effective Teaching Learning Process in English Curriculum at t...ijtsrd
“One Language sets you in a corridor for life. Two languages open every door along the way” Frank Smith English as a foreign language or as a second language has been ruling in India since the period of Lord Macaulay. But the question is how much we teach or learn English properly in our culture. Is there any scope to use English as a language rather than a subject How much we learn or teach English without any interference of mother language specially in the classroom teaching learning scenario in West Bengal By considering all these issues the researcher has attempted in this article to focus on the effective teaching learning process comparing to other traditional strategies in the field of English curriculum at the secondary level to investigate whether they fulfill the present teaching learning requirements or not by examining the validity of the present curriculum of English. The purpose of this study is to focus on the effectiveness of the systematic, scientific, sequential and logical transaction of the course between the teachers and the learners in the perspective of the 5Es programme that is engage, explore, explain, extend and evaluate. Sanchali Mondal | Santinath Sarkar "A Study on the Effective Teaching Learning Process in English Curriculum at the Secondary Level of West Bengal" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62412.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/62412/a-study-on-the-effective-teaching-learning-process-in-english-curriculum-at-the-secondary-level-of-west-bengal/sanchali-mondal
The Role of Mentoring and Its Influence on the Effectiveness of the Teaching ...ijtsrd
This paper reports on a study which was conducted to investigate the role of mentoring and its influence on the effectiveness of the teaching of Physics in secondary schools in the South West Region of Cameroon. The study adopted the convergent parallel mixed methods design, focusing on respondents in secondary schools in the South West Region of Cameroon. Both quantitative and qualitative data were collected, analysed separately, and the results were compared to see if the findings confirm or disconfirm each other. The quantitative analysis found that majority of the respondents 72 of Physics teachers affirmed that they had more experienced colleagues as mentors to help build their confidence, improve their teaching, and help them improve their effectiveness and efficiency in guiding learners’ achievements. Only 28 of the respondents disagreed with these statements. With majority respondents 72 agreeing with the statements, it implies that in most secondary schools, experienced Physics teachers act as mentors to build teachers’ confidence in teaching and improving students’ learning. The interview qualitative data analysis summarized how secondary school Principals use meetings with mentors and mentees to promote mentorship in the school milieu. This has helped strengthen teachers’ classroom practices in secondary schools in the South West Region of Cameroon. With the results confirming each other, the study recommends that mentoring should focus on helping teachers employ social interactions and instructional practices feedback and clarity in teaching that have direct measurable impact on students’ learning achievements. Andrew Ngeim Sumba | Frederick Ebot Ashu | Peter Agborbechem Tambi "The Role of Mentoring and Its Influence on the Effectiveness of the Teaching of Physics in Secondary Schools in the South West Region of Cameroon" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64524.pdf Paper Url: https://www.ijtsrd.com/management/management-development/64524/the-role-of-mentoring-and-its-influence-on-the-effectiveness-of-the-teaching-of-physics-in-secondary-schools-in-the-south-west-region-of-cameroon/andrew-ngeim-sumba
Design Simulation and Hardware Construction of an Arduino Microcontroller Bas...ijtsrd
This study primarily focuses on the design of a high side buck converter using an Arduino microcontroller. The converter is specifically intended for use in DC DC applications, particularly in standalone solar PV systems where the PV output voltage exceeds the load or battery voltage. To evaluate the performance of the converter, simulation experiments are conducted using Proteus Software. These simulations provide insights into the input and output voltages, currents, powers, and efficiency under different state of charge SoC conditions of a 12V,70Ah rechargeable lead acid battery. Additionally, the hardware design of the converter is implemented, and practical data is collected through operation, monitoring, and recording. By comparing the simulation results with the practical results, the efficiency and performance of the designed converter are assessed. The findings indicate that while the buck converter is suitable for practical use in standalone PV systems, its efficiency is compromised due to a lower output current. Chan Myae Aung | Dr. Ei Mon "Design Simulation and Hardware Construction of an Arduino-Microcontroller Based DC-DC High-Side Buck Converter for Standalone PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64518.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/64518/design-simulation-and-hardware-construction-of-an-arduinomicrocontroller-based-dcdc-highside-buck-converter-for-standalone-pv-system/chan-myae-aung
Sustainable Energy by Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadikuijtsrd
Energy becomes sustainable if it meets the needs of the present without compromising the ability of future generations to meet their own needs. Some of the definitions of sustainable energy include the considerations of environmental aspects such as greenhouse gas emissions, social, and economic aspects such as energy poverty. Generally far more sustainable than fossil fuel are renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy sources. Worthy of note is that some renewable energy projects, like the clearing of forests to produce biofuels, can cause severe environmental damage. The sustainability of nuclear power which is a low carbon source is highly debated because of concerns about radioactive waste, nuclear proliferation, and accidents. The switching from coal to natural gas has environmental benefits, including a lower climate impact, but could lead to delay in switching to more sustainable options. “Carbon capture and storage” can be built into power plants to remove the carbon dioxide CO2 emissions, but this technology is expensive and has rarely been implemented. Leading non renewable energy sources around the world is fossil fuels, coal, petroleum, and natural gas. Nuclear energy is usually considered another non renewable energy source, although nuclear energy itself is a renewable energy source, but the material used in nuclear power plants is not. The paper addresses the issue of sustainable energy, its attendant benefits to the future generation, and humanity in general. Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadiku "Sustainable Energy" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64534.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/64534/sustainable-energy/paul-a-adekunte
Concepts for Sudan Survey Act Implementations Executive Regulations and Stand...ijtsrd
This paper aims to outline the executive regulations, survey standards, and specifications required for the implementation of the Sudan Survey Act, and for regulating and organizing all surveying work activities in Sudan. The act has been discussed for more than 5 years. The Land Survey Act was initiated by the Sudan Survey Authority and all official legislations were headed by the Sudan Ministry of Justice till it was issued in 2022. The paper presents conceptual guidelines to be used for the Survey Act implementation and to regulate the survey work practice, standardizing the field surveys, processing, quality control, procedures, and the processes related to survey work carried out by the stakeholders and relevant authorities in Sudan. The conceptual guidelines are meant to improve the quality and harmonization of geospatial data and to aid decision making processes as well as geospatial information systems. The established comprehensive executive regulations will govern and regulate the implementation of the Sudan Survey Geomatics Act in all surveying and mapping practices undertaken by the Sudan Survey Authority SSA and state local survey departments for public or private sector organizations. The targeted standards and specifications include the reference frame, projection, coordinate systems, and the guidelines and specifications that must be followed in the field of survey work, processes, and mapping products. In the last few decades, there has been a growing awareness of the importance of geomatics activities and measurements on the Earths surface in space and time, together with observing and mapping the changes. In such cases, data must be captured promptly, standardized, and obtained with more accuracy and specified in much detail. The paper will also highlight the current situation in Sudan, the degree to which survey standards are used, the problems encountered, and the errors that arise from not using the standards and survey specifications. Kamal A. A. Sami "Concepts for Sudan Survey Act Implementations - Executive Regulations and Standards" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63484.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63484/concepts-for-sudan-survey-act-implementations--executive-regulations-and-standards/kamal-a-a-sami
Towards the Implementation of the Sudan Interpolated Geoid Model Khartoum Sta...ijtsrd
The discussions between ellipsoid and geoid have invoked many researchers during the recent decades, especially during the GNSS technology era, which had witnessed a great deal of development but still geoid undulation requires more investigations. To figure out a solution for Sudans local geoid, this research has tried to intake the possibility of determining the geoid model by following two approaches, gravimetric and geometrical geoid model determination, by making use of GNSS leveling benchmarks at Khartoum state. The Benchmarks are well distributed in the study area, in which, the horizontal coordinates and the height above the ellipsoid have been observed by GNSS while orthometric heights were carried out using precise leveling. The Global Geopotential Model GGM represented in EGM2008 has been exploited to figure out the geoid undulation at the benchmarks in the study area. This is followed by a fitting process, that has been done to suit the geoid undulation data which has been computed using GNSS leveling data and geoid undulation inspired by the EGM2008. Two geoid surfaces were created after the fitting process to ensure that they are identical and both of them could be counted for getting the same geoid undulation with an acceptable accuracy. In this respect, statistical operation played an important role in ensuring the consistency and integrity of the model by applying cross validation techniques splitting the data into training and testing datasets for building the geoid model and testing its eligibility. The geometrical solution for geoid undulation computation has been utilized by applying straightforward equations that facilitate the calculation of the geoid undulation directly through applying statistical techniques for the GNSS leveling data of the study area to get the common equation parameters values that could be utilized to calculate geoid undulation of any position in the study area within the claimed accuracy. Both systems were checked and proved eligible to be used within the study area with acceptable accuracy which may contribute to solving the geoid undulation problem in the Khartoum area, and be further generalized to determine the geoid model over the entire country, and this could be considered in the future, for regional and continental geoid model. Ahmed M. A. Mohammed. | Kamal A. A. Sami "Towards the Implementation of the Sudan Interpolated Geoid Model (Khartoum State Case Study)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63483.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63483/towards-the-implementation-of-the-sudan-interpolated-geoid-model-khartoum-state-case-study/ahmed-m-a-mohammed
Activating Geospatial Information for Sudans Sustainable Investment Mapijtsrd
Sudan is witnessing an acceleration in the processes of development and transformation in the performance of government institutions to raise the productivity and investment efficiency of the government sector. The development plans and investment opportunities have focused on achieving national goals in various sectors. This paper aims to illuminate the path to the future and provide geospatial data and information to develop the investment climate and environment for all sized businesses, and to bridge the development gap between the Sudan states. The Sudan Survey Authority SSA is the main advisor to the Sudan Government in conducting surveying, mappings, designing, and developing systems related to geospatial data and information. In recent years, SSA made a strategic partnership with the Ministry of Investment to activate Geospatial Information for Sudans Sustainable Investment and in particular, for the preparation and implementation of the Sudan investment map, based on the directives and objectives of the Ministry of Investment MI in Sudan. This paper comes within the framework of activating the efforts of the Ministry of Investment to develop technical investment services by applying techniques adopted by the Ministry and its strategic partners for advancing investment processes in the country. Kamal A. A. Sami "Activating Geospatial Information for Sudan's Sustainable Investment Map" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63482.pdf Paper Url: https://www.ijtsrd.com/engineering/information-technology/63482/activating-geospatial-information-for-sudans-sustainable-investment-map/kamal-a-a-sami
Educational Unity Embracing Diversity for a Stronger Societyijtsrd
In a rapidly changing global landscape, the importance of education as a unifying force cannot be overstated. This paper explores the crucial role of educational unity in fostering a stronger and more inclusive society through the embrace of diversity. By examining the benefits of diverse learning environments, the paper aims to highlight the positive impact on societal strength. The discussion encompasses various dimensions, from curriculum design to classroom dynamics, and emphasizes the need for educational institutions to become catalysts for unity in diversity. It highlights the need for a paradigm shift in educational policies, curricula, and pedagogical approaches to ensure that they are reflective of the diverse fabric of society. This paper also addresses the challenges associated with implementing inclusive educational practices and offers practical strategies for overcoming barriers. It advocates for collaborative efforts between educational institutions, policymakers, and communities to create a supportive ecosystem that promotes diversity and unity. Mr. Amit Adhikari | Madhumita Teli | Gopal Adhikari "Educational Unity: Embracing Diversity for a Stronger Society" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64525.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64525/educational-unity-embracing-diversity-for-a-stronger-society/mr-amit-adhikari
Integration of Indian Indigenous Knowledge System in Management Prospects and...ijtsrd
The diversity of indigenous knowledge systems in India is vast and can vary significantly between different communities and regions. Preserving and respecting these knowledge systems is crucial for maintaining cultural heritage, promoting sustainable practices, and fostering cross cultural understanding. In this paper, an overview of the prospects and challenges associated with incorporating Indian indigenous knowledge into management is explored. It is found that IIKS helps in management in many areas like sustainable development, tourism, food security, natural resource management, cultural preservation and innovation, etc. However, IIKS integration with management faces some challenges in the form of a lack of documentation, cultural sensitivity, language barriers legal framework, etc. Savita Lathwal "Integration of Indian Indigenous Knowledge System in Management: Prospects and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63500.pdf Paper Url: https://www.ijtsrd.com/management/accounting-and-finance/63500/integration-of-indian-indigenous-knowledge-system-in-management-prospects-and-challenges/savita-lathwal
DeepMask Transforming Face Mask Identification for Better Pandemic Control in...ijtsrd
The COVID 19 pandemic has highlighted the crucial need of preventive measures, with widespread use of face masks being a key method for slowing the viruss spread. This research investigates face mask identification using deep learning as a technological solution to be reducing the risk of coronavirus transmission. The proposed method uses state of the art convolutional neural networks CNNs and transfer learning to automatically recognize persons who are not wearing masks in a variety of circumstances. We discuss how this strategy improves public health and safety by providing an efficient manner of enforcing mask wearing standards. The report also discusses the obstacles, ethical concerns, and prospective applications of face mask detection systems in the ongoing fight against the pandemic. Dilip Kumar Sharma | Aaditya Yadav "DeepMask: Transforming Face Mask Identification for Better Pandemic Control in the COVID-19 Era" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64522.pdf Paper Url: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/64522/deepmask-transforming-face-mask-identification-for-better-pandemic-control-in-the-covid19-era/dilip-kumar-sharma
Streamlining Data Collection eCRF Design and Machine Learningijtsrd
Efficient and accurate data collection is paramount in clinical trials, and the design of Electronic Case Report Forms eCRFs plays a pivotal role in streamlining this process. This paper explores the integration of machine learning techniques in the design and implementation of eCRFs to enhance data collection efficiency. We delve into the synergies between eCRF design principles and machine learning algorithms, aiming to optimize data quality, reduce errors, and expedite the overall data collection process. The application of machine learning in eCRF design brings forth innovative approaches to data validation, anomaly detection, and real time adaptability. This paper discusses the benefits, challenges, and future prospects of leveraging machine learning in eCRF design for streamlined and advanced data collection in clinical trials. Dhanalakshmi D | Vijaya Lakshmi Kannareddy "Streamlining Data Collection: eCRF Design and Machine Learning" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63515.pdf Paper Url: https://www.ijtsrd.com/biological-science/biotechnology/63515/streamlining-data-collection-ecrf-design-and-machine-learning/dhanalakshmi-d
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
2. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29543 | Volume – 4 | Issue – 1 | November-December 2019 Page 902
be separated. With favourable circumstances there are
somewhere in the range of few disadvantages as well,
appending fins to any surface expands the weight and may
now and again decline the general effectiveness. They can be
utilized just where a surface is in direct contact with the
liquid close by.
Applications
1. They are used in IC engines where engine is exposed to
air like two wheelers and aircraft.
2. They are used in compressors as well.
3. Fins are also used in the Evaporators and condensation
components of the refrigeration and air conditioning.
4. They are also used in the electricmotors.
Literature Review
S. A. Nadaa et al. [1] Free type convection heat transfer in a
level annulus with fins and without fins were numerically
examined for rectangular fins and longitudinal fins annular
fins. The effect of Rayleigh constant number, annulus
profundity, fin number and measurement the heat stream
pattern, isotherms, transfers and compelling warm
conductivity were contemplated. Correlation between the
heat transfer upgrades of the annular fins and the
longitudinal fins wasdirected.
Omer Sarfraz et al. [2] This paper displays the improvement
of a point by point model with the cross-fin conduction type
heat transfer convenience.Thisapparatusisdifferentiatedby
exploratory data and without thought of cross-fin heat
conduction for two of the cooling and heating cases. As
impact of the cross-fin heat conductionuponthegeneralheat
transfer was viewed as under 10 % of by and large heat
transfer, when two of the water systems were dynamic
(water stream in other compartments of heat exchanger).
Regardless, cross-fin type conduction ends up imperativefor
instance a most outrageousdifferentiationofmoreimportant
than 20% by the general heat transfer was found when only
one arrangement of theheatexchangerwasinactive(without
any water stream in the chambers). The cross-fin heat
conduction was moreover found to increase by extended
difference in the air and water temperatures under heat
exchangerchannelespeciallywhenheatexchangersystem(s)
is inactive. By and large, the model without any cross fin-
conduction have an extended tendency to under predict the
breaking point right when one structure is inert and
extension of cross fin conduction to the model lessens that
proportion of tendency. Thus, disregarding cross-fin
conduction when heat exchanger system(s) is inert may
achieves less precise desire for all in all heat exchanger limit.
Shwin-Chung Wong et al.[3] This examination numerically
explores the normal convection from level cylinder with
circular type fins.Theseparametersincorporatefindiameter,
tube diameter, fin material, and fin dispersing, under a
permanent temperature distinction by 50 K and the fin
thickness by 0.5 mm .
Saroj Yadava et al.[4] The present work revealed is the
correlation of numerical information with experimental
information. After the experiment it has been inferred that
the heat transfer from fin increments by increment in inlet
speed and along these lines here is a decent understandingof
observationalandthenumericaloutcomeshavefound.Bythe
contextual investigations, This has been discovered that kite
and curved shape has more prominent impact on Nusselt
number and heat transfer coefficient.
Pulkit Sagara et al.[5] The example of round and hollow
bodies, body surface harshness 400 micron and 300 micron,
250 micron taken into thought.Aprogressionoftemperature
is about equal in each of the Three bodies. By the harshness
of body increments from 240 to 400 micron the heat motion
increments. Which implies the rate of heat dissemination
increments as the harshness increment for same zone and
volume. The examination of body reason that as the
increment the unpleasantness of body the heat transfer
increments by the group of same region and volume.
Partner L. Ndlovua et al. [6] We have effectively done warm
investigation of outspreadfins.Inthissubsequentdifferential
conditions have comprehended utilizing He's VIM and the
explanatory arrangements have benchmarked by the value
arrangements. These effects of thermo physical parameters
were illustrated with clarification. The radiation type heat
transfer has expected to happen at higher temperatures as
depicted against the type of coefficient of heat transfer. We
have likewise demonstrated that investigativearrangements
may significant upon depicting the thermo physical
properties of heat transfer conditions. The unequivocal
arrangements give a simple method for assessing fins bases
warm conductance and the fins proficiency, this will be
troublesome utilizing value plans. Besides, this incorporated
shift in weather conditions term on spiral model offin,which
by consequence of constant fin development. The expansion
in velocity of flowing actuates an even stream field which
thus expands heat dissemination from non uniform fin. We
see that temperature in abatements with expanding
estimations of Peclet number and thermo-geometric fins
parameters. When cooling is necessary, More estimations of
Peclet number and thermo-geometric parameters will be
required.
Xiaoming Huanga t al. [7] A heat pipe sink with a fin exhibit
the inconsistent and ceaselessly non uniform heights were
predicted toincreaseregularconvectionheattransferagainst
decreasing stream opposition. A presentationexaminationof
the heat pipe sink with VHFA was completed dependent on
numerical reproduction. To explain stream and the heat
transfer attributes, parameter examines and multi-target
advancement examination were led.
Mr. Vibhav Sawant et al. [8] This paper is focussed on
accomplishing higher heat transfer rate and higher film
coefficient. The system for accomplishing this target can be
extraordinary. The heat transfer rate may be expanded
against altering geometry of the fins as concentrated in this
paper as on account of vehicle radiators. Additionally the
sensational change in the heat transfer coefficient by scores
and in this way the expansion in heat transfer rate was seen
in this paper. Utilizing a covering of yttrium oxide expands
the fin effectiveness and has focal points over the traditional
fins.
Tehmina Ambreen et al. [9] The pin fin shape-subordinate
heat transfer and liquid stream attributes of water and
nanofluid cooled heat sink by the stunned micropin- fin
course of action were researched by actualizing the
Lagrangian-Eulerian model. The stick fin designs of square,
3. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29543 | Volume – 4 | Issue – 1 | November-December 2019 Page 903
roundabout and triangular cross-areas can broke down for
the parametric weight scope of 570 Pa ≤ ΔP ≤ 2760 Pa. For
the nanofluid coolant, the watery arrangement areenhanced
with a 0.5% volume division of alumina nanoparticles by a
normal measurement of 20 nm. Heat transfer traits are
communicated as far as warm obstruction and nearby and
normal Nusselt number, though the stream and speed forms
are plotted to appreciate the stream dispersion within the
heat sinks of variable stick fin designs.
A.M. González et al. [10] The presentinvestigationproposesa
half and half test/numerical strategy to get the normal
convective type heattransfercoefficientwhat'smore,general
fin surface proficiency of the cylinder column plate finned
heat exchanger with in-line course of action. This method
joins exploratory information got from wind burrow
estimations and value recreation of heat transferred by fins
to decide a traditional in general fin effectiveness, η0, and
found the middle valueofconvectiveheattransfercoefficient,
h0. This idea has demonstrated against testing the gadget of
various fins materials (aluminum AL, CS and Cu) and wind
current rate (4.9 10. ≤ ue 0 m/s). This procedure was
approved with some looking at outcomesforNusseltnumber
by connections proposed by Kaminski and Gross and ESCOA
for the aluminum fins. The parametric report has
demonstrated that Nusselt number relating to the finned
surfaces depends principally on the geometrical and wind
stream parameters. For Prandtl number Pr= 0.7 and scopeof
Reynolds number102 ≤ ≤× ReDh .510 4, a connection can be
approximated as Nu Pr Re Dh = 0.2617 Dh 1/3 0.6318
(coefficient of assurance R2= 0.993). Contrastingly, the
generalfinsurfaceproficiency,η¯0,andworldwideparameter
Nu η Dh × ¯0 (Nusselt number dependent upon general heat
transfer coefficient, U) rely on the material of fin and were
found bigger for larger conductive materials. Besides,
evaluation of the mass and cost proficiency shows that
aluminium fins give the most elevated heat conversion
standard per unit mass, and steel fins yield the littlest
expense per unit heat transfer rate.
Khoshvaght-Aliabadi el al.[ 11] This paper talks concluded
thatdifferentparameterslikeshape(rectangular,roundabout,
tapered,conelike,parabolic),geometryandmaterial(copper,
aluminium, mellow steel, metal and stainless steel) of pin fin
were thought about in ANSYS. The results demonstrated
copper roundabout empty pin balance and copper
rectangular fin balance to be ideal fin balances. It was
discovered that copper and aluminium pin balances with
same shape have about equivalent heat transfer. So it was
presumed that aluminium tobe idealmaterialforpinbalance
because of economic imperatives.
Dipankar Bhanja et al.[12] This paper examined the heat
transfer improvement by permeable pin fins in a free
convection. For answer for administering fin condition
Adomian disintegration technique was utilized. It was
discovered that with increment in nusselt number and
porosity proportion fin productivity diminishes and with
increment in sweep to length proportion fin proficiency
increments. Theparameterslikeporosityproportion,Raleigh
number warm conductivity proportion improves heat
transfer.
Pandit et al.[13] In this paper, different geometries and pin
fin stature proportion to the channel of thermoelectric
generator for vehicle applications wereinspectedtoimprove
the proficiency. It was discovered that precious diamond
molded pin fins demonstrated to be superior to different
shapes for warm proficiency. It was additionally discovered
that pin fin tochannelstatureproportionat0.5demonstrated
greatest proficiency.
Younghwan joo et al.[14] This paper looked at the heat
transfer of plate fin with pin fin heat soaks in freeconvection.
They gave an approved new connection of heat transfer
coefficient for the advancement of stick fin heat sinks. This
has discovered that for all out heat dissemination plate fin
heat sinks demonstrated to superior to anything pin fin heat
sinks, while for heat dispersal per unit mass the turn around
is valid.
Conclusion
Subsequent to experiencing some of research papers on fins,
the end turned out that proficiency of fin can be expanded in
a few different ways relying on parameters. A few different
ways and systems have been created by specialists so as to
upgrade the heat transfer by fins. It was discovered that in
materials of fins aluminium demonstrated to be more
proficient than others. Including dividing and interferences
can likewise improve the efficiency. Prologue to scores and
openings can likewise be valuable to improve the
productivity of fins. By expanding Reynolds number heat
transfer by fins can be expanded. Likewise fins of curved
geometry can likewiseimprovetherateofheattransferwhen
contrasted with different geometries like annular and
unusual fins. Adding covering to fins can likewise improve
heat transfer. A fin exhibit withdimplesisanotherinstanceof
improving heat transfer through fins.
REFERENCES
[1] S. A. Nada, M.A.Saida, 2018. “Effects of fin geometries,
arrangements, dimensions and numbers on natural
convection heat transfer characterstics in finned
horizontal annulus", International Journal of Thermal
sciences.
[2] Omer Sarfraz, Christian, K. Bach Craig R. Bradshaw,
2019, “Discrete Modeling Of fin and tube Heat
Exchangers With cross-fin Conduction functionality”,
International Journal Of Refrigeration.
[3] Shwin-Chung Wong, Wei-Yi Lee, 2018, “Numerical
study on the natural convection fromhorizontal finned
tubes with small and large fin temperature variations”,
International Journal of Thermal Sciences.
[4] Saroj Yadava, Krishna M. Pandeya, 2016, "A
Comparative Thermal Analysis of Pin Fins for
Improved Heat Transfer in Forced Convection",
Department of Mechanical Engineering, National
Institute of Technology Silchar, Assam.
[5] Pulkit Sagara, Puneet Teotiab, Akash DeepSahlotc,H.C
Thakur, 2016, "Heat transfer analysisandoptimization
of engine fins of varying surface roughness",
International Conference on Advancements in
Aeromechanical Materials for Manufacturing.
[6] Partner L. Ndlovua, Raseelo J. Moitshekia,
2019,"Analysis of temperature distribution in radial
moving fins with temperature dependent thermal
conductivity andheattransfercoefficient,International
Journal of ThermalSciences.
4. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29543 | Volume – 4 | Issue – 1 | November-December 2019 Page 904
[7] Xiaoming Huanga, Chunyu Shia, Junhe Zhoub, Xiaojian
Lua, Guoliang Xua, 2019,"Performance analysis and
design optimization of heat pipe sink with a variable
height fin array under natural convection", Applied
ThermalEngineering.
[8] Mr. Vibhav Sawant, Mr. Suprabhat Mohod , Archana
Gaikwad , Parth Shah, 2017,"Review Paper on
Optimisation of Fins by Modifying Geometry and
Materials used for Production",International Journal of
Innovative andEmerging Research in Engineering.
[9] Tehmina Ambreen, Arslan Saleem, Cheol Woo Park,
2019, "Pin-fin shape- dependentheattransferandfluid
flow characteristics of water- and nanofluid-cooled
micropin-fin heat sinks: Square,circularandtriangular
fin cross-sections", Applied Thermal Engineering.
[10] A. M. González, M. Vaz Jr., P.S.B. Zdanski, 2018, " A
hybrid numerical- experimental analysis of heat
transfer by forced convection in plate-finned heat
exchangers", Applied Thermal Engineering.
[11] Khoshvaght-Aliabadi, M., Deldar, S., & Hassani, S. M.,
2018, “Effects of pin-fins geometry and nanofluid on
the performance of a pin-fin miniature heat sink”,
(PFMHS), International Journal ofMechanical Sciences.
[12] Bhanja, D., Kundu, B., & Mandal, P. K. , 2013, “Thermal
analysis of porous pin fin used for electronic cooling”,
Procedia Engineering
[13] Pandit, J., Thompson, M., Ekkad, S. V., & Huxtable, S. T. ,
2014, “Effect of pin fin to channel height ratio and pin
fin geometry on heat transfer performancefor flow in
rectangular channels”, International Journal of heat
and mass transfer
[14] Joo, Y., & Kim, S. J. , 2015, “ Comparison of thermal
performance between plate-fin and pin-fin heat sinks
in natural convection”, International Journal of Heat
and Mass Transfer.