A one page overveiw on current and future uk street lighting costs
•
0 likes•497 views
UK local councils are being sold very expensive LED lanterns, to replace the HPS lanterns, in order to reduce the councils energy and service cost bills by 70%. I have developed a low cost alternitive useing a traditional lanter head that incorparated a HP sodium bulb, instead uses a LED screw in corn bulb, that comes with a life of 50,000 hrs. While the lantern casing has a life of 20 + years. If your council or country is looking to reduce its street/road lighting costs, contact me today
Report
Share
Report
Share
Download to read offline
Recommended
Ellipz Lighting: Projects behind our success
The document summarizes the energy and cost savings from replacing various lighting fixtures with more efficient LED alternatives from Ellipz. It provides details on the wattage reduction, energy savings in kWh and dollars annually, payback periods, and lighting output in lux for several replacement projects including outdoor SON lamps, fluorescent T8 and T5 tubes, and HPS fixtures with Ellipz LED high bays, undercabinet lights, troffers, and street lights. The replacements resulted in energy savings ranging from 68 kWh to over 3,000 kWh annually with payback periods between 9 to 30 months depending on the fixture and operating hours.
Cato Energy (3)
This document summarizes technologies that can derive renewable energy from sustainable sources of carbon, including various forms of waste. It describes a process that converts organic waste into porous, reactive carbon and recyclable materials using CO2 and/or CO. This process is more efficient and less capital intensive than traditional mass burn energy production. The carbon produced can be used as fuel in coal power plants or converted into hydrocarbon gases and liquids. It also outlines technologies for producing "clean coal" from high-sulfur coal to generate carbon, sulfur and electricity in an environmentally safe way.
BOUZOUKAS_A. _INNOVATION WEEK ON RES_PRESENTATION_2013_EN_FINAL
The document discusses European energy policy and renewable energy targets. It focuses on Greece's targets for renewable energy sources (RES) like hydro, photovoltaics, wind, and biomass. Greece exceeded its 2020 photovoltaics target of 2,500 MWp by installing that much in 2013 instead. Net metering is presented as a solution to sustain renewable energy growth without government support and create new markets. Examples are given showing how net metering could allow homeowners to cover energy needs and costs with rooftop solar and potentially electric vehicles or heat pumps.
Smart Grids
The document discusses how to meet future energy demands in the UK in a sustainable way through 2030 and beyond. It proposes using renewable sources like wind, solar, biomass and tidal for 30% of energy, and nuclear and carbon capture coal for another 60%, totaling 90% clean energy. The remaining 10% would come from "dirty" coal energy. It also discusses using smart grids, dynamic demand, storage and dispersed generation to better match energy use to intermittent renewable supply and reduce costs for consumers.
Eco3 Bts Env
The document compares the environmental impact of using an ECO3 device at one telecommunications site versus 1000 sites. It finds that at one site the device can power 1.12 homes and save 1506kg of CO2 emissions while at 1000 sites it can power 1120 homes, save 1.5 million kg of CO2, and save 800 acres of trees. Scaling up to more sites results in substantial increases in energy savings, greenhouse gas reductions, and acres of trees saved.
Energy and Sydney - high demand and new solutions | Biocity Studio
The document summarizes the history and development of electricity generation and distribution in Australia, particularly in Sydney and New South Wales, from 1863 to the present day. It discusses key milestones like the first electric light display in 1863, cities gaining street lighting in the late 1800s, and the first power station built in Melbourne in 1904. It also provides statistics on current electricity connections, annual generation amounts, household consumption averages, and projections for increased demand from Sydney's growing population.
The Role of Low Carbon Technologies
The document discusses low carbon technologies that could be implemented in the village of St Margaret's at Cliffe in Dover, UK. It analyzes the costs, benefits, and payback periods of various large-scale wind turbines, bio-mass systems, and renovations to reduce the carbon emissions of homes in the village. It also provides examples of sustainable technologies like PV-T hybrid solar panels, solar hot water, voltage optimization, and LED lighting that can help lower energy use and carbon footprint.
Be An Energy Producer
By conserving electricity through replacing incandescent light bulbs with compact fluorescent lamps (CFLs), individuals can help produce electricity and reduce carbon emissions. CFLs use 75% less energy than incandescent bulbs to produce the same amount of light. Replacing four bulbs saves over 1 kWh of electricity per day. At a household level this could generate over 500 kWh annually, equivalent to the output of a small diesel generator. CFLs also last around 10 times longer than incandescent bulbs, saving money on purchasing replacements.
Recommended
Ellipz Lighting: Projects behind our success
The document summarizes the energy and cost savings from replacing various lighting fixtures with more efficient LED alternatives from Ellipz. It provides details on the wattage reduction, energy savings in kWh and dollars annually, payback periods, and lighting output in lux for several replacement projects including outdoor SON lamps, fluorescent T8 and T5 tubes, and HPS fixtures with Ellipz LED high bays, undercabinet lights, troffers, and street lights. The replacements resulted in energy savings ranging from 68 kWh to over 3,000 kWh annually with payback periods between 9 to 30 months depending on the fixture and operating hours.
Cato Energy (3)
This document summarizes technologies that can derive renewable energy from sustainable sources of carbon, including various forms of waste. It describes a process that converts organic waste into porous, reactive carbon and recyclable materials using CO2 and/or CO. This process is more efficient and less capital intensive than traditional mass burn energy production. The carbon produced can be used as fuel in coal power plants or converted into hydrocarbon gases and liquids. It also outlines technologies for producing "clean coal" from high-sulfur coal to generate carbon, sulfur and electricity in an environmentally safe way.
BOUZOUKAS_A. _INNOVATION WEEK ON RES_PRESENTATION_2013_EN_FINAL
The document discusses European energy policy and renewable energy targets. It focuses on Greece's targets for renewable energy sources (RES) like hydro, photovoltaics, wind, and biomass. Greece exceeded its 2020 photovoltaics target of 2,500 MWp by installing that much in 2013 instead. Net metering is presented as a solution to sustain renewable energy growth without government support and create new markets. Examples are given showing how net metering could allow homeowners to cover energy needs and costs with rooftop solar and potentially electric vehicles or heat pumps.
Smart Grids
The document discusses how to meet future energy demands in the UK in a sustainable way through 2030 and beyond. It proposes using renewable sources like wind, solar, biomass and tidal for 30% of energy, and nuclear and carbon capture coal for another 60%, totaling 90% clean energy. The remaining 10% would come from "dirty" coal energy. It also discusses using smart grids, dynamic demand, storage and dispersed generation to better match energy use to intermittent renewable supply and reduce costs for consumers.
Eco3 Bts Env
The document compares the environmental impact of using an ECO3 device at one telecommunications site versus 1000 sites. It finds that at one site the device can power 1.12 homes and save 1506kg of CO2 emissions while at 1000 sites it can power 1120 homes, save 1.5 million kg of CO2, and save 800 acres of trees. Scaling up to more sites results in substantial increases in energy savings, greenhouse gas reductions, and acres of trees saved.
Energy and Sydney - high demand and new solutions | Biocity Studio
The document summarizes the history and development of electricity generation and distribution in Australia, particularly in Sydney and New South Wales, from 1863 to the present day. It discusses key milestones like the first electric light display in 1863, cities gaining street lighting in the late 1800s, and the first power station built in Melbourne in 1904. It also provides statistics on current electricity connections, annual generation amounts, household consumption averages, and projections for increased demand from Sydney's growing population.
The Role of Low Carbon Technologies
The document discusses low carbon technologies that could be implemented in the village of St Margaret's at Cliffe in Dover, UK. It analyzes the costs, benefits, and payback periods of various large-scale wind turbines, bio-mass systems, and renovations to reduce the carbon emissions of homes in the village. It also provides examples of sustainable technologies like PV-T hybrid solar panels, solar hot water, voltage optimization, and LED lighting that can help lower energy use and carbon footprint.
Be An Energy Producer
By conserving electricity through replacing incandescent light bulbs with compact fluorescent lamps (CFLs), individuals can help produce electricity and reduce carbon emissions. CFLs use 75% less energy than incandescent bulbs to produce the same amount of light. Replacing four bulbs saves over 1 kWh of electricity per day. At a household level this could generate over 500 kWh annually, equivalent to the output of a small diesel generator. CFLs also last around 10 times longer than incandescent bulbs, saving money on purchasing replacements.
CeX Camberley Case Study Oct 2015
This document provides information on an energy-saving lighting conversion project completed for a CeX Entertainment Exchange store in Camberley, Surrey. The project is estimated to save £2,217.20 per year in energy costs with a payback period of 26.5 months based on annual usage. LED retrofit lighting was installed to replace old inefficient fluorescent tubes and save 2/3 of the energy usage. The store director reported the new retrofit and LED lights have made the store brighter while reducing energy costs.
Energy North
Energy North is an Aboriginal-owned company specializing in biomass heating technology manufactured in Canada. They have over 26 years of experience designing and manufacturing biomass industrial boilers and cogeneration plants. Their certified products meet North American standards and regulations and include commercial pellet boilers, hybrid biomass boilers, and biomass cogeneration systems for communities.
111114 finland biowind
The document discusses a BioWind project in South Ostrobothnia, Finland that aims to increase renewable energy production through wind power and biofuels. The project will expand wind power capacity to 500 turbines producing 1800 MW of power. It will also increase the use of forest biomass for bioenergy to between 6-13.5 million cubic meters per year by 2020. The goal is for renewable sources to provide 25% of the region's total energy production and for bioenergy to account for 90% of renewable energy.
GenCell CleanTech Open 2014
GenCell provides backup power solutions using alkaline fuel cell technology. Their fuel cells can provide clean, reliable backup power for as long as needed. GenCell fuel cells offer several advantages over diesel generators and batteries including longer duration backup from a single fuel source, higher efficiency, and lower fuel costs through the use of ammonia. GenCell is also developing hybrid and off-grid solutions to provide continuous power using their fuel cells combined with batteries and renewable energy sources.
Toby Ast, Preservation of Affordable Housing
Toby Ast, Preservation of Affordable HousingNational Housing Conference & the Center for Housing Policy
Bridle Path Apartments is a 104-unit elderly housing complex in Randolph, MA consisting of 3 buildings built in 1983. The document discusses renovating the buildings' community room and considers converting from electric to gas heating, but estimates it would have a 31.6 year payback. Instead, efficiency upgrades like lighting, weatherstripping, and insulation are estimated to cost $8,500 with a shorter payback. A 43kW solar photovoltaic system was also installed with a $439,880 grant, projected to generate 49,000 kWh annually. Results showed a 6-7% improvement in energy usage from 2006-2009 after adjustments.Wiggly Numbers | Bob Everett
The document discusses the challenges in accurately accounting for carbon emissions from various energy sources and technologies. It notes that small differences in assigned emission factors can significantly impact policy decisions. Proper accounting is difficult as emission factors may vary depending on fuel source, grid load, and other complex factors. The document examines issues with emission factors for biofuels, electricity, and combined heat and power generation. Consistent and accurate emission accounting requires more research to address ongoing uncertainties and variability.
Balatonfüred Town Public Street Lighting Project of GE Lighting
Balatonfüred Town Council in Hungary, as part of its greening strategy, changed its old lighting system to GE’s public LED lighting solution, with increased energy efficiency, long-life and low maintenance.
Balatonfüred is the first town in Europe to roll out GE's LED streetlights. Most streetlamps currently in place are in desperate need of an upgrade. Streetlighting accounts for a whopping 30% of the average local authority's energy bill – lighting is a very resource-hungry utility. It becomes especially wasteful when the lights aren't operating at their most efficient and therefore haemorrhages funds that could be better used elsewhere. In Balatonfüred, a town with a population of only 13,500 people, 1,400 GE luminaires have already been rolled out, and the town is already planning to install the lighting across the entire town and reap the benefits.
Eco3 Atm Env
The document summarizes the annual environmental impact of a single ATM site. It reports that the site saves 3456 kWh of energy, powers 1.12 domestic homes, and reduces carbon dioxide emissions by 1506kg, sulfur dioxide emissions by 607kg, and nitrogen oxide by 6kg. Using the technology at 10000 ATM sites could light 11000 homes, save 8000 acres of trees, and achieve significant environmental benefits.
Vickers_Ice_01
Vickers Electronics has achieved 48.5 billion kWh of energy savings, representing £9.5 billion in savings to UK industry, and reducing CO2 emissions by 9 million tons over 25 years of contributing to a low carbon future.
Tv standby
Turning off electronics when not in use can save significant amounts of energy and money. Leaving a TV in standby mode uses about 1 kWh of electricity every 2 days, costing around 30 euros per year. Producing that 1 kWh requires burning 0.9 kg of coal or oil and emits 2.5 kg of carbon dioxide. If all 2 million Danish TVs were left on standby constantly it would use 360 million kWh per year, cost 60 million euros, require burning 36,000 tons of coal or oil, and emit 90,000 tons of carbon dioxide.
CASE STUDY: Hendesigns
Hendesigns Ltd provides energy efficient lighting solutions and services including free energy surveys, funding assistance, and installation. They have helped over 70 local businesses upgrade their lighting and obtain Energy Grant 500 funding of up to £500 for projects with paybacks of under 5 years. Examples included switching a delicatessen's halogen and fluorescent lights to LEDs for £2911 with a 4.3 year payback and annual savings of £550, and converting a health club's lights using adapters and replacing halogens with LEDs for £632 with a 1.15 year payback and £549 in annual savings.
China Base Led Street Light Ningbo Andy
The document is from Tony Cheung, VP of Sales at a Chinese LED lighting company established in 2005 with $14 million in capital investment. It summarizes the company's factory and production facilities, quality certifications, customer base, and LED street lighting products which offer energy savings of 40-60% over traditional lighting as well as a lifespan of over 14 years.
Ch 11 stopping new carbon plants thru energy efficiency
Study materials for most important book on global warming and how to save civilization in the 9 years left.
Air Source Heatpump Case Study - Part 1
The document summarizes heat pump testing results from a 24-day period in a highly insulated home. It reports an average daily electrical input of 3.7 kWh/day to provide heating, which is better than the target of 2.36 kWh/day set by the Zero Carbon Britain plan. Further improvements could be made by reducing heat pump cycling and standby power consumption. The heat pump provides heating with significantly lower carbon emissions than gas heating on the average UK grid.
Mooc wendy carmona
The document proposes an alternative technology project to reduce greenhouse gas emissions from a housing construction project in Mexico. The key points are:
1) A construction company is building 10,000 homes that would emit over 108,540 tons of CO2 annually using conventional technology, exceeding Mexico's limit of 25,000 tons.
2) The proposed alternative uses solar panels, LED lights, and solar water heaters, reducing emissions to 24,462 tons annually.
3) This alternative would cost $230.9 million initially but save $158.9 million annually in energy costs while generating $121.1 million annually from selling the reduced emissions credits. The investment would be recouped in 1 year and 9 months
All Energy Presentation 2010
All Energy 2010 Dialight LED Lighting Presentation - \'Smart LED Lighting Solutions to Reduce Carbon in UK Cities and Business\'
Lokesh
The document discusses the different types of light bulbs - incandescent, CFL, and LED. It provides details on their energy efficiency, lifespan, luminous efficiency, power consumption, and environmental impact. LED bulbs are the most efficient option, with energy savings of 80-90% compared to incandescent bulbs. They last 50,000 hours compared to 1,200 hours for incandescent. LEDs do not contain toxic mercury like CFLs. Widespread adoption of LEDs in India could save 9,000 million kWh of electricity annually, worth $850 million. This would significantly reduce the need for new power plants and cut national electricity demand.
Ecoterrace Refurb Presentation Axis Design
The document discusses a competition to refurbish terraced homes in Newcastle and Stoke to make them more energy efficient and reduce their carbon emissions. It states that approximately 45,000 terraced homes could be refurbished to upgrade their insulation, install solar panels, use more efficient heating and lighting, and reduce their annual carbon emissions by over 5 tons per home on average. The refurbishments aim to lower energy bills by around £100 per month and raise the home's energy performance certificate rating to band B.
Promlite GREEN Benefits
Lights are the second largest user of energy in commercial buildings and traditional lighting utilizes less than 25% of energy input as light with the rest lost as heat. LED lights operate at much lower temperatures than traditional bulbs, reducing energy costs from air conditioning and lasting 50,000 hours or more, lowering maintenance costs from fewer replacement needs. Switching to LED lighting can reduce a building's carbon footprint from lighting by 85% due to their higher energy efficiency compared to incandescent bulbs, helping address global warming concerns.
Electricity storage
This document discusses methods for estimating household electricity consumption in Poland. It provides statistics showing the average annual electricity consumption per dwelling in Poland is around 2,100 kWh. It then estimates average daily consumption at 6 kWh but notes this may increase to 10-12 kWh in summer due to air conditioning use. A second method calculates estimated weekly consumption of common appliances totaling around 7 kWh daily. The document then discusses electricity storage options like Tesla Powerwalls and considers costs, capacities, and payback periods for households. It estimates a household could save around €585-€4,095 annually depending on the battery lifespan. Finally, it performs a SWOT analysis and provides recommendations regarding suppliers and targeting markets with higher electricity costs
Building Integrated Renewables Public
The document discusses various renewable energy sources including solar, wind, biomass, and biofuels. It provides information on technologies such as solar photovoltaics and solar thermal, types of wind turbines, biomass heating systems, and combined heat and power systems. Case studies are presented on installations of solar PV, biomass CHP, and small residential wind turbines.
Maintenance-Lighting Presentation
This document discusses the history and evolution of electrical lighting, from Thomas Edison's incandescent lamp to modern LED lighting. It notes that while fluorescent tubes were an improvement over early incandescent bulbs, they contain mercury and have high disposal costs. The document also presents a case study showing that switching an office from fluorescent to LED lighting would save over £7,000 annually and pay for itself within 1.5 years, due to LEDs being more energy efficient and having lower maintenance costs over their lifespan. A large project is planned to replace lighting in several areas of a building with LEDs at an estimated cost of £150,000.
More Related Content
What's hot
CeX Camberley Case Study Oct 2015
This document provides information on an energy-saving lighting conversion project completed for a CeX Entertainment Exchange store in Camberley, Surrey. The project is estimated to save £2,217.20 per year in energy costs with a payback period of 26.5 months based on annual usage. LED retrofit lighting was installed to replace old inefficient fluorescent tubes and save 2/3 of the energy usage. The store director reported the new retrofit and LED lights have made the store brighter while reducing energy costs.
Energy North
Energy North is an Aboriginal-owned company specializing in biomass heating technology manufactured in Canada. They have over 26 years of experience designing and manufacturing biomass industrial boilers and cogeneration plants. Their certified products meet North American standards and regulations and include commercial pellet boilers, hybrid biomass boilers, and biomass cogeneration systems for communities.
111114 finland biowind
The document discusses a BioWind project in South Ostrobothnia, Finland that aims to increase renewable energy production through wind power and biofuels. The project will expand wind power capacity to 500 turbines producing 1800 MW of power. It will also increase the use of forest biomass for bioenergy to between 6-13.5 million cubic meters per year by 2020. The goal is for renewable sources to provide 25% of the region's total energy production and for bioenergy to account for 90% of renewable energy.
GenCell CleanTech Open 2014
GenCell provides backup power solutions using alkaline fuel cell technology. Their fuel cells can provide clean, reliable backup power for as long as needed. GenCell fuel cells offer several advantages over diesel generators and batteries including longer duration backup from a single fuel source, higher efficiency, and lower fuel costs through the use of ammonia. GenCell is also developing hybrid and off-grid solutions to provide continuous power using their fuel cells combined with batteries and renewable energy sources.
Toby Ast, Preservation of Affordable Housing
Toby Ast, Preservation of Affordable HousingNational Housing Conference & the Center for Housing Policy
Bridle Path Apartments is a 104-unit elderly housing complex in Randolph, MA consisting of 3 buildings built in 1983. The document discusses renovating the buildings' community room and considers converting from electric to gas heating, but estimates it would have a 31.6 year payback. Instead, efficiency upgrades like lighting, weatherstripping, and insulation are estimated to cost $8,500 with a shorter payback. A 43kW solar photovoltaic system was also installed with a $439,880 grant, projected to generate 49,000 kWh annually. Results showed a 6-7% improvement in energy usage from 2006-2009 after adjustments.Wiggly Numbers | Bob Everett
The document discusses the challenges in accurately accounting for carbon emissions from various energy sources and technologies. It notes that small differences in assigned emission factors can significantly impact policy decisions. Proper accounting is difficult as emission factors may vary depending on fuel source, grid load, and other complex factors. The document examines issues with emission factors for biofuels, electricity, and combined heat and power generation. Consistent and accurate emission accounting requires more research to address ongoing uncertainties and variability.
Balatonfüred Town Public Street Lighting Project of GE Lighting
Balatonfüred Town Council in Hungary, as part of its greening strategy, changed its old lighting system to GE’s public LED lighting solution, with increased energy efficiency, long-life and low maintenance.
Balatonfüred is the first town in Europe to roll out GE's LED streetlights. Most streetlamps currently in place are in desperate need of an upgrade. Streetlighting accounts for a whopping 30% of the average local authority's energy bill – lighting is a very resource-hungry utility. It becomes especially wasteful when the lights aren't operating at their most efficient and therefore haemorrhages funds that could be better used elsewhere. In Balatonfüred, a town with a population of only 13,500 people, 1,400 GE luminaires have already been rolled out, and the town is already planning to install the lighting across the entire town and reap the benefits.
Eco3 Atm Env
The document summarizes the annual environmental impact of a single ATM site. It reports that the site saves 3456 kWh of energy, powers 1.12 domestic homes, and reduces carbon dioxide emissions by 1506kg, sulfur dioxide emissions by 607kg, and nitrogen oxide by 6kg. Using the technology at 10000 ATM sites could light 11000 homes, save 8000 acres of trees, and achieve significant environmental benefits.
Vickers_Ice_01
Vickers Electronics has achieved 48.5 billion kWh of energy savings, representing £9.5 billion in savings to UK industry, and reducing CO2 emissions by 9 million tons over 25 years of contributing to a low carbon future.
Tv standby
Turning off electronics when not in use can save significant amounts of energy and money. Leaving a TV in standby mode uses about 1 kWh of electricity every 2 days, costing around 30 euros per year. Producing that 1 kWh requires burning 0.9 kg of coal or oil and emits 2.5 kg of carbon dioxide. If all 2 million Danish TVs were left on standby constantly it would use 360 million kWh per year, cost 60 million euros, require burning 36,000 tons of coal or oil, and emit 90,000 tons of carbon dioxide.
What's hot (10)
Balatonfüred Town Public Street Lighting Project of GE Lighting
Balatonfüred Town Public Street Lighting Project of GE Lighting
Similar to A one page overveiw on current and future uk street lighting costs
CASE STUDY: Hendesigns
Hendesigns Ltd provides energy efficient lighting solutions and services including free energy surveys, funding assistance, and installation. They have helped over 70 local businesses upgrade their lighting and obtain Energy Grant 500 funding of up to £500 for projects with paybacks of under 5 years. Examples included switching a delicatessen's halogen and fluorescent lights to LEDs for £2911 with a 4.3 year payback and annual savings of £550, and converting a health club's lights using adapters and replacing halogens with LEDs for £632 with a 1.15 year payback and £549 in annual savings.
China Base Led Street Light Ningbo Andy
The document is from Tony Cheung, VP of Sales at a Chinese LED lighting company established in 2005 with $14 million in capital investment. It summarizes the company's factory and production facilities, quality certifications, customer base, and LED street lighting products which offer energy savings of 40-60% over traditional lighting as well as a lifespan of over 14 years.
Ch 11 stopping new carbon plants thru energy efficiency
Study materials for most important book on global warming and how to save civilization in the 9 years left.
Air Source Heatpump Case Study - Part 1
The document summarizes heat pump testing results from a 24-day period in a highly insulated home. It reports an average daily electrical input of 3.7 kWh/day to provide heating, which is better than the target of 2.36 kWh/day set by the Zero Carbon Britain plan. Further improvements could be made by reducing heat pump cycling and standby power consumption. The heat pump provides heating with significantly lower carbon emissions than gas heating on the average UK grid.
Mooc wendy carmona
The document proposes an alternative technology project to reduce greenhouse gas emissions from a housing construction project in Mexico. The key points are:
1) A construction company is building 10,000 homes that would emit over 108,540 tons of CO2 annually using conventional technology, exceeding Mexico's limit of 25,000 tons.
2) The proposed alternative uses solar panels, LED lights, and solar water heaters, reducing emissions to 24,462 tons annually.
3) This alternative would cost $230.9 million initially but save $158.9 million annually in energy costs while generating $121.1 million annually from selling the reduced emissions credits. The investment would be recouped in 1 year and 9 months
All Energy Presentation 2010
All Energy 2010 Dialight LED Lighting Presentation - \'Smart LED Lighting Solutions to Reduce Carbon in UK Cities and Business\'
Lokesh
The document discusses the different types of light bulbs - incandescent, CFL, and LED. It provides details on their energy efficiency, lifespan, luminous efficiency, power consumption, and environmental impact. LED bulbs are the most efficient option, with energy savings of 80-90% compared to incandescent bulbs. They last 50,000 hours compared to 1,200 hours for incandescent. LEDs do not contain toxic mercury like CFLs. Widespread adoption of LEDs in India could save 9,000 million kWh of electricity annually, worth $850 million. This would significantly reduce the need for new power plants and cut national electricity demand.
Ecoterrace Refurb Presentation Axis Design
The document discusses a competition to refurbish terraced homes in Newcastle and Stoke to make them more energy efficient and reduce their carbon emissions. It states that approximately 45,000 terraced homes could be refurbished to upgrade their insulation, install solar panels, use more efficient heating and lighting, and reduce their annual carbon emissions by over 5 tons per home on average. The refurbishments aim to lower energy bills by around £100 per month and raise the home's energy performance certificate rating to band B.
Promlite GREEN Benefits
Lights are the second largest user of energy in commercial buildings and traditional lighting utilizes less than 25% of energy input as light with the rest lost as heat. LED lights operate at much lower temperatures than traditional bulbs, reducing energy costs from air conditioning and lasting 50,000 hours or more, lowering maintenance costs from fewer replacement needs. Switching to LED lighting can reduce a building's carbon footprint from lighting by 85% due to their higher energy efficiency compared to incandescent bulbs, helping address global warming concerns.
Electricity storage
This document discusses methods for estimating household electricity consumption in Poland. It provides statistics showing the average annual electricity consumption per dwelling in Poland is around 2,100 kWh. It then estimates average daily consumption at 6 kWh but notes this may increase to 10-12 kWh in summer due to air conditioning use. A second method calculates estimated weekly consumption of common appliances totaling around 7 kWh daily. The document then discusses electricity storage options like Tesla Powerwalls and considers costs, capacities, and payback periods for households. It estimates a household could save around €585-€4,095 annually depending on the battery lifespan. Finally, it performs a SWOT analysis and provides recommendations regarding suppliers and targeting markets with higher electricity costs
Building Integrated Renewables Public
The document discusses various renewable energy sources including solar, wind, biomass, and biofuels. It provides information on technologies such as solar photovoltaics and solar thermal, types of wind turbines, biomass heating systems, and combined heat and power systems. Case studies are presented on installations of solar PV, biomass CHP, and small residential wind turbines.
Maintenance-Lighting Presentation
This document discusses the history and evolution of electrical lighting, from Thomas Edison's incandescent lamp to modern LED lighting. It notes that while fluorescent tubes were an improvement over early incandescent bulbs, they contain mercury and have high disposal costs. The document also presents a case study showing that switching an office from fluorescent to LED lighting would save over £7,000 annually and pay for itself within 1.5 years, due to LEDs being more energy efficient and having lower maintenance costs over their lifespan. A large project is planned to replace lighting in several areas of a building with LEDs at an estimated cost of £150,000.
Eco-Street-2-version (1)
The document proposes a two-phase smart street lighting project for the UK. Phase 1 would convert 6.6 million public street lamps to LED, saving energy costs. Phase 2 would add cameras to lampposts, allowing smart parking features while further reducing energy usage. Using 20W LED lamps instead of 60W lamps could save over £129 million per year in energy costs. The target is Birmingham City Council, with the goal of expanding the project nationally.
community retrofit
The document summarizes Radian Housing Association's 'Retrofit South East' project to retrofit social housing in southeast England to make it more energy efficient and reduce carbon emissions. It discusses the UK's need to retrofit most of its existing housing by 2050 to meet climate targets. The project retrofitted 33 homes in Petersfield to an advanced standard through measures like insulation, efficient appliances and solar panels, reducing regulated CO2 emissions by up to 88%. It also trained local businesses and conducted research on the benefits of retrofitting, which include job creation, health and economic savings.
The Positive Environmental and Economical Impact of CHP
By capturing waste heat from electricity production, CHP systems require less fuel than separate heat and power systems, reducing greenhouse gas emissions like CO2 and air pollutants such as NOx. If 20% of US power came from CHP by 2030, it could eliminate 848 million tons of CO2 emissions, equivalent to removing 154 million cars from the road. CHP also provides economic benefits like reduced energy costs, offset capital costs, and a hedge against volatile energy prices. For example, using CHP in Saudi Arabia could increase crude oil exports by 150,000 barrels per day, increasing national revenues by around 14 billion Saudi Riyals annually.
Stop Local Warming: How Buildings Can Deliver Profitable CO2-Savings, Eelco v...
Stop Local Warming: How Buildings Can Deliver Profitable CO2-Savings, Eelco v...Alliance To Save Energy
On December 14, 2009, the Alliance to Save Energy and the Renewable Energy and Energy Efficiency Partnership (REEEP) held a side event at the COP15 climate conference in Copenhagen, Denmark, entitled, "Paradox to Paradigm: The Role of Energy Efficiency in Creating Low Carbon Economies."Climate Change Mitigation & Adaptation
Climate Change Plan
Renewable Technologies
Financial Assistance
Conservation & Efficiency
Mitigation with Technology
Global Climate Change
UK Energy Supply & Climate
Scotland\'s Projected Climate Changes
Climate Change Adaptation & Forward Planning
Hen Amr 2010 07 20
The University of Hull has over 18,000 students and 2,500 staff across its main and satellite campuses. It aims to reduce its carbon emissions by 34% by 2020 and 80% by 2050 relative to 1990 levels in line with UK climate targets. Installing automatic meter reading and flow reduction devices in student residence hall showers could save on water, energy, and emissions; and pay for themselves within a few years due to avoided costs under the UK's Carbon Reduction Commitment policy. The university holds energy saving competitions between residence halls to reduce consumption by 10%.
Induction Presentation Cgls 2011
This document discusses the benefits of induction lighting compared to other lighting technologies such as high pressure sodium (HPS) and metal halide lighting. Induction lights last significantly longer at 100,000 hours compared to 22,000 hours for HPS and 10,000 hours for metal halide. They also maintain higher lumen output over their lifetime. This results in substantial savings for cities and businesses in reduced maintenance and energy costs when replacing existing lighting with induction fixtures. Induction lighting also produces light that appears brighter to the human eye due to its higher color rendering index and color temperature.
LVD EMI Lighting
Advanced NRG Solutions partners with LVD to promote induction lighting as an energy efficient alternative to traditional lighting solutions like LED and high pressure sodium. LVD lamps have lifespans over 60,000 hours, higher efficiency than LEDs, and case studies show they provide better lighting while reducing energy costs and maintenance compared to other options. Examples of successful street lighting and industrial projects in China and other countries demonstrate the benefits of LVD induction lamps.
Similar to A one page overveiw on current and future uk street lighting costs (20)
Ch 11 stopping new carbon plants thru energy efficiency
Ch 11 stopping new carbon plants thru energy efficiency
The Positive Environmental and Economical Impact of CHP
The Positive Environmental and Economical Impact of CHP
Stop Local Warming: How Buildings Can Deliver Profitable CO2-Savings, Eelco v...
Stop Local Warming: How Buildings Can Deliver Profitable CO2-Savings, Eelco v...
Recently uploaded
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge EducationGlobal Landscapes Forum (GLF)
Presented by Feri Johana at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyEpcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Promoting Multilateral Cooperation for Sustainable Peatland management
Presented by Agus Julianto on GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably
Global Peatlands Map and Hotspot Explanation Atlas
Presented by Alexandra Barthelmes at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
在线办理(lboro毕业证书)拉夫堡大学毕业证学历证书一模一样
学校原件一模一样【微信：741003700 】《(lboro毕业证书)拉夫堡大学毕业证学历证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Overview of the Global Peatlands Assessment
Presented by Patrick Scheel at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...Global Landscapes Forum (GLF)
Presented by Sonya Dewi at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyENVIRONMENT~ Renewable Energy Sources and their future prospects.
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Peatlands of Latin America and the Caribbean
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Recycling and Disposal on SWM Raymond Einyu pptx
Increasing urbanization, rural–urban migration, rising standards of living, and rapid development associated with population growth have resulted in increased solid waste generation by industrial, domestic and other activities in Nairobi City. It has been noted in other contexts too that increasing population, changing consumption patterns, economic development, changing income, urbanization and industrialization all contribute to the increased generation of waste.
With the increasing urban population in Kenya, which is estimated to be growing at a rate higher than that of the country’s general population, waste generation and management is already a major challenge. The industrialization and urbanization process in the country, dominated by one major city – Nairobi, which has around four times the population of the next largest urban centre (Mombasa) – has witnessed an exponential increase in the generation of solid waste. It is projected that by 2030, about 50 per cent of the Kenyan population will be urban.
Aim:
A healthy, safe, secure and sustainable solid waste management system fit for a world – class city.
Improve and protect the public health of Nairobi residents and visitors.
Ecological health, diversity and productivity and maximize resource recovery through the participatory approach.
Goals:
Build awareness and capacity for source separation as essential components of sustainable waste management.
Build new environmentally sound infrastructure and systems for safe disposal of residual waste and replacing current dumpsites which should be commissioned.
Current solid waste management situation:
The status.
Solid waste generation rate is at 2240 tones / day
collection efficiently is at about 50%.
Actors i.e. city authorities, CBO’s , private firms and self-disposal
Current SWM Situation in Nairobi City:
Solid waste generation – collection – dumping
Good Practices:
• Separation – recycling – marketing.
• Open dumpsite dandora dump site through public education on source separation of waste, of which the situation can be reversed.
• Nairobi is one of the C40 cities in this respect , various actors in the solid waste management space have adopted a variety of technologies to reduce short lived climate pollutants including source separation , recycling , marketing of the recycled products.
• Through the network, it should expect to benefit from expertise of the different actors in the network in terms of applicable technologies and practices in reducing the short-lived climate pollutants.
Good practices:
Despite the dismal collection of solid waste in Nairobi city, there are practices and activities of informal actors (CBOs, CBO-SACCOs and yard shop operators) and other formal industrial actors on solid waste collection, recycling and waste reduction.
Practices and activities of these actor groups are viewed as innovations with the potential to change the way solid waste is handled.
CHALLENGES:
• Resource Allocation.
Wildlife-AnIntroduction.pdf so that you know more about our environment
All about wildlife, if you are fond of animals and wildlife then do follow us for more content like this
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
Climate Change All over the World .pptx
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
原版制作(Newcastle毕业证书)纽卡斯尔大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(Newcastle毕业证书)纽卡斯尔大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Recently uploaded (20)
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...
Promoting Multilateral Cooperation for Sustainable Peatland management
Promoting Multilateral Cooperation for Sustainable Peatland management
Global Peatlands Map and Hotspot Explanation Atlas
Global Peatlands Map and Hotspot Explanation Atlas
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
world-environment-day-2024-240601103559-14f4c0b4.pptx
world-environment-day-2024-240601103559-14f4c0b4.pptx
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
Wildlife-AnIntroduction.pdf so that you know more about our environment
Wildlife-AnIntroduction.pdf so that you know more about our environment
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
A one page overveiw on current and future uk street lighting costs
- 1. Thermaltricity™ Delivering value beyond technology Registered office address: 05-15,13 A/F South Tower, World Finance Centre, Harbor City, 17 Canton Rd, Tsim Sha Tsui, Kowloon, Hong Kong Contact Details: Mr Eric R Hawkins (MD) E-Mail: enquiries@thermaltricity.com Skype: jayhawk8 Sales Office China: thermaltricity@yeah.net (Ms R Wang), M:+86 15861165109. UK - T: + 44 (0)1202 881115 Lowest cost LED direct replacement for HPS street light bulbs Below, the average running costs & Co2 emissions of a 150 watt HP sodium lamp The UK Government is committed to cutting Co2 Emissions by 80% by 2050. In 2010, UK street lighting stock in all pole heights was 7.2 million The latest figures obtained for the running costs per 8 hr day per street light is £0.26p including the energy cost based on a £0.10p a kWh and replacement of HPS bulb every 20,000 hrs. One street light with an average wattage of 150 watts, operating on average 8 hrs a day x 365 days = 438 kWh x £0.10p a kWh = £43.80 or £0.12p a day 7.2 million Street lights x £43.80 = £306.6 million + replacement of the HPS bulb every 20,000 hrs (4- 5 years) at a cost of £30.00 each = £43.2 million every year + installation cost and safe disposal The carbon emissions released by the burning of 7.2 million HPS bulbs a year based on DEFRA figures is 0.527 kG per 1kWh = 1.6 billion kG Projected LED bulb replacement and energy costs & Co2 emission reductions To provide the same lumens and warm colour as the current 150 watt HPS bulb uses in the above figures, a new direct replacement LED Corn bulb as shown in the pictures above uses just 45 watts an hour, reducing energy costs by 70% a year. With the NEW replacement LED bulb, the energy cost is reduced to £13.14p a year = to £0.036p per day based on £0.10p per kWh charged by the Utility. 7.2 million Street Lights x £13.14p = £172.6 million with a life of 50,000 hrs (10-12 years) at a cost of £48.00 each. Replacement LED bulb cost over 12 years is £4.00 Carbon emissions will fall to 490 million kG year on year. The bottom line to all UK councils seeking to cut street lighting running costs is to NOT follow Bournemouth by sending the old HPS light fixture to scrap merchants to be replaced with a more expensive all in one LED fixture nobody can service.