This document proposes a conceptual framework for measuring the performance of supply chain collaboration at different stages of partnership. It discusses key performance metrics identified in the literature, including operational efficiency, risk/return ratio, order of dominance, cost, profit, inventory levels, forecast accuracy, flexibility, and responsiveness. The document also describes two case studies of companies at different stages of collaboration practice to validate the proposed model and understand how different metrics are used at initial and advanced collaboration stages.
This document discusses statistical analysis methods for comparing final weight scores in quality function deployment (QFD) studies. It introduces a statistical testing procedure to determine if the final weights assigned to engineering attributes in a QFD house of quality matrix are significantly different. The testing procedure uses a parametric bootstrap method to generate random samples and test the significance of differences between final weight scores. The document also examines the robustness of different rating scales used in QFD relationship matrices and their impact on the final weight scores. The statistical testing procedure aims to provide a reliable basis for prioritizing engineering attributes and determine where differences in final weights are meaningful.
Aberdeen executive sales and operations planning maturity levels and key sol...asar770218
The document discusses sales and operations planning (S&OP) maturity levels and key solutions. It explores the business challenges companies face, including rising costs and global complexity. S&OP aims to maximize profitability through cost control. The top focus areas for companies are supply chain visibility, inventory management, collaboration, and S&OP. As economic conditions remain unstable, S&OP is given more attention to integrate finance and manage complexity.
Serialized Optimization Of Supply Chain Model Using Genetic Algorithm And Geo...Jonathan Lobo
• “Serialized Optimization Of Supply Chain Model Using Genetic Algorithm And Geometric Predictions” in international journal for science and advance research in technology Volume 2,Issue 10 in October 2016
This document discusses the rising costs of manufacturing in China and the potential for "nearshoring" production to Mexico. Key points include:
- Labor and other manufacturing costs have risen significantly in China in recent years and are expected to continue increasing due to government policy, while the cost gap with Mexico is narrowing.
- Raw material and energy costs can vary significantly between countries - for example, natural gas and some plastics inputs are cheaper in North America.
- Environmental and industrial policy changes in China are expected to further affect costs and competitiveness for some industries.
- Recent major investments by large companies in Mexico underline its continued competitiveness for manufacturing.
This document analyzes factors that determine the success of value chains. It provides real-world examples of different types of value chains, including collaborative, coordinated, and cooperative chains. Five key requirements for effective value chain management are identified from these examples: 1) the attitude of participants, 2) ability to learn and adapt, 3) ability to acquire and act on knowledge, 4) adherence to principles, and 5) focusing on relationships rather than labels. The document concludes by comparing value chains and value chain roundtables, and discusses an Australian initiative to strengthen industry competitiveness through value chain research, training and consultations.
This document provides an overview of a study on the impacts of service quality on customer satisfaction for Corporation X. The study aims to (1) construct service quality dimensions and a research framework for food retail chains, (2) explore differences between customer importance and satisfaction, and (3) provide a new management approach. The methodology section outlines the research framework based on SERVQUAL, a 36-item questionnaire, data collection from 400 customers, and analyses including descriptive statistics, factor analysis, reliability/validity testing, paired t-tests, ANOVA, and Importance-Performance Analysis.
One of the most important issues concerning the designing a supply chain is selecting the supplier. Selecting proper suppliers is one of the most crucial activities of an organization towards the gradual improvement and a promotion in performance. This intricacy is because suppliers fulfil a part of customer’s expectancy and selecting among them is multi-criteria decision, which needs a systematic and organized approach without which this decision may lead to failure. The purpose of this research is proposing a new method for assessment and rating the suppliers. We have identified several evaluation criteria and attributes; the selection among them was by the Simple Multi-Attribute Rating Technique (SMART) method, then we have specified the connection and the influence of the criteria on each other by DEMATEL method. After that, suppliers were graded by using the Fuzzy Analytical Network Process (FANP) approach and the most efficient one was selected. The innovation of this research is combining the SMART method, DEMATEL method, and Analytical Network Process in Fuzzy state which lead to more exact and efficient results which is proposed for the first time by the researchers of this study.
This document discusses statistical analysis methods for comparing final weight scores in quality function deployment (QFD) studies. It introduces a statistical testing procedure to determine if the final weights assigned to engineering attributes in a QFD house of quality matrix are significantly different. The testing procedure uses a parametric bootstrap method to generate random samples and test the significance of differences between final weight scores. The document also examines the robustness of different rating scales used in QFD relationship matrices and their impact on the final weight scores. The statistical testing procedure aims to provide a reliable basis for prioritizing engineering attributes and determine where differences in final weights are meaningful.
Aberdeen executive sales and operations planning maturity levels and key sol...asar770218
The document discusses sales and operations planning (S&OP) maturity levels and key solutions. It explores the business challenges companies face, including rising costs and global complexity. S&OP aims to maximize profitability through cost control. The top focus areas for companies are supply chain visibility, inventory management, collaboration, and S&OP. As economic conditions remain unstable, S&OP is given more attention to integrate finance and manage complexity.
Serialized Optimization Of Supply Chain Model Using Genetic Algorithm And Geo...Jonathan Lobo
• “Serialized Optimization Of Supply Chain Model Using Genetic Algorithm And Geometric Predictions” in international journal for science and advance research in technology Volume 2,Issue 10 in October 2016
This document discusses the rising costs of manufacturing in China and the potential for "nearshoring" production to Mexico. Key points include:
- Labor and other manufacturing costs have risen significantly in China in recent years and are expected to continue increasing due to government policy, while the cost gap with Mexico is narrowing.
- Raw material and energy costs can vary significantly between countries - for example, natural gas and some plastics inputs are cheaper in North America.
- Environmental and industrial policy changes in China are expected to further affect costs and competitiveness for some industries.
- Recent major investments by large companies in Mexico underline its continued competitiveness for manufacturing.
This document analyzes factors that determine the success of value chains. It provides real-world examples of different types of value chains, including collaborative, coordinated, and cooperative chains. Five key requirements for effective value chain management are identified from these examples: 1) the attitude of participants, 2) ability to learn and adapt, 3) ability to acquire and act on knowledge, 4) adherence to principles, and 5) focusing on relationships rather than labels. The document concludes by comparing value chains and value chain roundtables, and discusses an Australian initiative to strengthen industry competitiveness through value chain research, training and consultations.
This document provides an overview of a study on the impacts of service quality on customer satisfaction for Corporation X. The study aims to (1) construct service quality dimensions and a research framework for food retail chains, (2) explore differences between customer importance and satisfaction, and (3) provide a new management approach. The methodology section outlines the research framework based on SERVQUAL, a 36-item questionnaire, data collection from 400 customers, and analyses including descriptive statistics, factor analysis, reliability/validity testing, paired t-tests, ANOVA, and Importance-Performance Analysis.
One of the most important issues concerning the designing a supply chain is selecting the supplier. Selecting proper suppliers is one of the most crucial activities of an organization towards the gradual improvement and a promotion in performance. This intricacy is because suppliers fulfil a part of customer’s expectancy and selecting among them is multi-criteria decision, which needs a systematic and organized approach without which this decision may lead to failure. The purpose of this research is proposing a new method for assessment and rating the suppliers. We have identified several evaluation criteria and attributes; the selection among them was by the Simple Multi-Attribute Rating Technique (SMART) method, then we have specified the connection and the influence of the criteria on each other by DEMATEL method. After that, suppliers were graded by using the Fuzzy Analytical Network Process (FANP) approach and the most efficient one was selected. The innovation of this research is combining the SMART method, DEMATEL method, and Analytical Network Process in Fuzzy state which lead to more exact and efficient results which is proposed for the first time by the researchers of this study.
This document describes a study that aimed to validate a shortened 15-item version of the SERVPERF scale, called SERVPERF-M, for measuring customer perceptions of service quality. The researchers administered SERVPERF to customers of 4 small businesses to collect data. Exploratory factor analysis of the full 22-item SERVPERF scale found a 5-factor structure but the factors were not clearly defined as the original dimensions. Item analysis led to the development of SERVPERF-M with 3 items measuring each of 5 dimensions (Tangibles, Reliability, Responsiveness, Assurance, Empathy). Confirmatory factor analysis was used to validate that SERVPERF-M measures these same 5 latent traits. The researchers
The Importance of Supply Network Development and Firm’s Capabilities in Build...YogeshIJTSRD
This paper discusses the advantages and importance of supply chain network development and firm’s capability to enhance competitive advantage. Supplier network supply network plays an importance role for the company so that they will be able to play a more active role and optimal in the management and operation of the network of suppliers that include product design, production, suppliers, marketing and distribution. In large companies, a strong distribution network is needed, as well as in small and medium scale companies. Companies are required distribution network that is robust in the entire territory of Indonesia. To succeed in this objective, Companies need a distribution strategy, which is an area of marketing strategy aimed primarily at increasing sales and the number of customers to support sustainable growth. Robertus Sigit Haribowo Lukito | Lena Ellitan "The Importance of Supply Network Development and Firm’s Capabilities in Building Business Performance: A Theoretical Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd39903.pdf Paper URL: https://www.ijtsrd.com/management/strategic-management/39903/the-importance-of-supply-network-development-and-firm’s-capabilities-in-building-business-performance-a-theoretical-review/robertus-sigit-haribowo-lukito
This document discusses developing a taxonomy architecture for implementing a knowledge management (KM) solution for third-party logistics (3PL) service providers. It proposes a four-stage model to develop a generic taxonomy components framework (GTCF) to help structure and present knowledge for 3PL providers. The framework aims to guide 3PL executives in initiating KM processes according to their goals, organization, and technological/behavioral biases. While KM is important for 3PL providers, implementing KM solutions has been challenging due to issues like measuring success and presenting knowledge. The proposed GTCF taxonomy seeks to address these issues.
SUPPLY CHAIN STRATEGY BASED SUPPLIER EVALUATION-AN INTEGRATED FRAMEWORK ijmvsc
This document summarizes research on supply chain strategy-based supplier evaluation frameworks. It provides an overview of different manufacturing strategies (lean, agile, leagile) and discusses how supplier strategy should align with the organization's manufacturing strategy. The document then proposes a hybrid methodology using fuzzy positive/negative ideal ratings and membership degree transformation to evaluate supplier performance based on six key criteria under different supply chain strategies. An application example is provided to illustrate the proposed evaluation methodology.
This document proposes a hybrid methodology to help organizations achieve agility. It involves identifying key performance indicators (KPIs) aligned with strategic objectives, then constructing "houses of quality" to identify and rank important agile attributes, enablers, and improvement paths. The methodology is demonstrated through a case study of a food company in Iran. The company was able to identify the most suitable improvement paths to enhance its organizational agility. Some limitations are that only a limited number of KPIs could be included, and the metrics may be more industry-specific than inclusive of all possibilities. The practical implication is that the methodology ensures the right agility metrics are selected to match the organization's values and objectives.
In recent years, management and, consequently, supply chain performance measurement, has attracted the attention of a large number of managers and researchers in the field of production and operations management. In parallel with the evolution of organizations from a single approach to a network and supply chain approach, performance measurement systems have also changed and moved towards network and supply chain performance measurement. Therefore, in order to face the storm of great change and transformation and not give in to the wave of competitive aggression, organizations have long had one thing in common, and that is to focus approaches and focus efforts towards achieving results. Results that lead to a competitive advantage and are more effective and decisive in the performance indicators of the organization, including earning more. In this study, in order to identify and prioritize the factors affecting the supply chain in manufacturing companies, using indicators such as cost, timely delivery and procurement time to evaluate the supply chain efficiency is considered. And performance evaluation was performed at the manufacturer level. Therefore, in order to evaluate the performance of the supply chain using the AHP integration approach and the DEA method approach in the fuzzy environment, the suppliers and suppliers of the manufacturing company were evaluated and ranked in terms of performance.
This document discusses developing a balanced supplier scorecard. It begins with an introduction to supplier scorecards and balanced scorecards. It then reviews literature on supplier evaluation models and criteria. Two case studies on Honeywell and Tara Aerospace's supplier scorecards are presented. The document proposes a balanced supplier scorecard with four perspectives: financial, customer, internal processes, and innovation/learning. It identifies shortcomings in current scorecards and suggests enhancements like including environmental and social factors. The conclusion emphasizes that effective scorecards should be flexible, updated in real-time, cost-based, and benchmarked.
An effective way to optimize key performance factors of supply chainIAEME Publication
This document summarizes an article from the International Journal of Management that discusses optimizing key performance factors in supply chain management. The article begins with an abstract that outlines the goal of using analytical techniques to optimize costs in the outward supply chain. It then reviews relevant literature on supply chain performance measurement and modeling supply chain systems. The methodology section outlines the steps taken, which include identifying key parameters that influence performance, formulating the problem as minimizing total supply chain costs given constraints, validating the model, and implementing the solution. The conclusion emphasizes the importance of supply chain performance measurement for competitiveness.
Supply Chain Edge Supply Chain Alignment And Assessment White PaperjoebradySCE
In this white paper, we describe how a comprehensive supply chain assessment can help companies quickly identify the next generation of improvements, prioritize them according to business impact and the needs of critical stakeholders, and build concrete plans for implementing the desired improvements.
Operations Management Processes and Supply Chains Global 11th Edition Krajews...Callahanne
The document discusses several processes and examples of process analysis:
1. It provides discussion questions about various processes involving customer contact at different stages.
2. It discusses hybrid process solutions for hospitality businesses dealing with both tourism and business customers.
3. It compares the processes of eBay and McDonald's, noting how eBay accommodates customer variability while McDonald's reduces it.
4. It discusses potential process improvements in the medical industry through increased electronic file sharing.
This presentation describes the ASQ QMD Globalization & Supply Chain Technical Committee efforts to inventory existing supplier scorecards for benchmarking and to support its efforts to create supplier scorecard standards
johncachat@hotmail.com
www.peproso.com
Solution manual for operations management processes and supply chains 10th ed...Aamir Ali
This document contains 11 discussion questions about operations management concepts. The questions cover topics like identifying core processes, competitive priorities for companies like Amazon and FedEx, designing hospital emergency room operations, and calculating productivity metrics. Sample responses are provided that analyze strategic plans, environmental factors, core competencies, and key capabilities for different organizations.
Analysis The Leanness of The Supply Chain By Fuzzy QFDIJERA Editor
This document discusses using fuzzy quality function deployment (FQFD) to analyze the leanness of a supply chain. It begins with definitions of lean production and its principles. It then discusses using FQFD to identify lean attributes (LAs) and lean enablers (LEs) that contribute to a lean supply chain. A methodology is proposed that uses two houses of quality (HOQs) - the first to prioritize LAs based on competitive bases, and the second to determine relationships between LAs and LEs to identify which LEs should be implemented. Fuzzy logic is used to deal with imprecise assessments in both HOQs. The goal is to help companies achieve a lean supply chain through continuous improvement
Crosscheck: Intergation Methods, Supply Chain Management and the Boeing 787 D...Herbert Ferguson-Augustus
As a part of Communication course at the University of Minnesota, Herbert B. Ferguson-Augustus researched the supply chain management practices at the Boeing Company during the 787 Dreamliner Program. Research focuses on how Boeing integrated its Tier I suppliers into the design and production processes. Research findings are discussed here.
Solutions manual for operations management processes and supply chains 11th e...Brown485
Solutions Manual for Operations Management Processes and Supply Chains 11th Edition by Krajewski
Download at: http://downloadlink.org/p/solutions-manual-for-operations-management-processes-and-supply-chains-11th-edition-by-krajewski/
People also search:
operations management processes and supply chains 11th edition free pdf
operations management processes and supply chains 11th edition pdf
operations management processes and supply chains 11th edition solutions
operations management processes and supply chains 10th edition pdf
operations management: processes and supply chains (11th edition) ebook
operations management processes and supply chains 11th edition answers
operations management processes and supply chains 11th edition test bank
operations management processes and supply chains pdf
Operations Management Processes and Supply Chains 12th Edition Krajewski Test...kalotogub
This document contains a series of multiple choice questions about operations management processes in services and manufacturing. It covers key topics like the different types of processes (front office, back office, hybrid office and line, job, batch, continuous flow processes), how to position processes on matrices based on factors like customer contact and customization, and strategies like make-to-stock and assemble-to-order. The questions test understanding of core concepts around classifying and analyzing different process structures and choices in both manufacturing and service operations.
This document provides an overview of green quality and its relationship to green supply chain management. It discusses how quality and environmental sustainability have become increasingly important to organizations. The significance of considering both quality and the environment throughout the supply chain is explained. Key aspects of green quality are then explored in relation to different supply chain actors like suppliers, manufacturers, and logistics. Examples of companies that have improved their green quality through various initiatives are also provided.
Supply chain cost identification as a means of cost reduction strategy. a ca...Alexander Decker
This document summarizes a research article that examines the supply chain processes of Ghana Supply Company Limited (GSCL) with the aim of identifying non-value adding activities to offer cost reduction strategies. The study used questionnaires and interviews with GSCL procurement, warehousing, and shipping personnel. Findings showed GSCL's supply chain operations are well-coordinated under the director of operations. Activities like procurement, shipping, warehousing and fleet management are integrated. The study also found GSCL uses strategies like proper procurement planning and effective lead time management to reduce supply chain costs.
This article discusses the challenges of developing a common performance measurement system for a collaborative supply chain. Through a case study of a supply chain in the fast moving consumer goods industry, the authors examine two potential collaborative performance measures - inventory levels and product availability. They find that inventory levels cannot reliably be measured collaboratively due to data limitations. Measuring product availability would require a complex information sharing system across the supply chain. The key challenges revealed include underlying data inconsistencies, the need to synchronize business processes, and determining an appropriate collaborative evaluation method.
This document summarizes a research paper that examines the relationship between supply chain management practices (SCMP) and supply chain performance (SCP) in the electronics industry in Malaysia. The study tested a research framework using a structural equation modeling method. The results indicate that six of the seven dimensions of SCMP have a significant positive effect on SCP. The dimension of "agreed vision and goals" showed the greatest influence on SCP compared to the other SCMP dimensions. The study provides insights for SCM practitioners and policymakers on how SCMP can increase competitiveness and SCP in manufacturing industries.
This document describes a study that aimed to validate a shortened 15-item version of the SERVPERF scale, called SERVPERF-M, for measuring customer perceptions of service quality. The researchers administered SERVPERF to customers of 4 small businesses to collect data. Exploratory factor analysis of the full 22-item SERVPERF scale found a 5-factor structure but the factors were not clearly defined as the original dimensions. Item analysis led to the development of SERVPERF-M with 3 items measuring each of 5 dimensions (Tangibles, Reliability, Responsiveness, Assurance, Empathy). Confirmatory factor analysis was used to validate that SERVPERF-M measures these same 5 latent traits. The researchers
The Importance of Supply Network Development and Firm’s Capabilities in Build...YogeshIJTSRD
This paper discusses the advantages and importance of supply chain network development and firm’s capability to enhance competitive advantage. Supplier network supply network plays an importance role for the company so that they will be able to play a more active role and optimal in the management and operation of the network of suppliers that include product design, production, suppliers, marketing and distribution. In large companies, a strong distribution network is needed, as well as in small and medium scale companies. Companies are required distribution network that is robust in the entire territory of Indonesia. To succeed in this objective, Companies need a distribution strategy, which is an area of marketing strategy aimed primarily at increasing sales and the number of customers to support sustainable growth. Robertus Sigit Haribowo Lukito | Lena Ellitan "The Importance of Supply Network Development and Firm’s Capabilities in Building Business Performance: A Theoretical Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd39903.pdf Paper URL: https://www.ijtsrd.com/management/strategic-management/39903/the-importance-of-supply-network-development-and-firm’s-capabilities-in-building-business-performance-a-theoretical-review/robertus-sigit-haribowo-lukito
This document discusses developing a taxonomy architecture for implementing a knowledge management (KM) solution for third-party logistics (3PL) service providers. It proposes a four-stage model to develop a generic taxonomy components framework (GTCF) to help structure and present knowledge for 3PL providers. The framework aims to guide 3PL executives in initiating KM processes according to their goals, organization, and technological/behavioral biases. While KM is important for 3PL providers, implementing KM solutions has been challenging due to issues like measuring success and presenting knowledge. The proposed GTCF taxonomy seeks to address these issues.
SUPPLY CHAIN STRATEGY BASED SUPPLIER EVALUATION-AN INTEGRATED FRAMEWORK ijmvsc
This document summarizes research on supply chain strategy-based supplier evaluation frameworks. It provides an overview of different manufacturing strategies (lean, agile, leagile) and discusses how supplier strategy should align with the organization's manufacturing strategy. The document then proposes a hybrid methodology using fuzzy positive/negative ideal ratings and membership degree transformation to evaluate supplier performance based on six key criteria under different supply chain strategies. An application example is provided to illustrate the proposed evaluation methodology.
This document proposes a hybrid methodology to help organizations achieve agility. It involves identifying key performance indicators (KPIs) aligned with strategic objectives, then constructing "houses of quality" to identify and rank important agile attributes, enablers, and improvement paths. The methodology is demonstrated through a case study of a food company in Iran. The company was able to identify the most suitable improvement paths to enhance its organizational agility. Some limitations are that only a limited number of KPIs could be included, and the metrics may be more industry-specific than inclusive of all possibilities. The practical implication is that the methodology ensures the right agility metrics are selected to match the organization's values and objectives.
In recent years, management and, consequently, supply chain performance measurement, has attracted the attention of a large number of managers and researchers in the field of production and operations management. In parallel with the evolution of organizations from a single approach to a network and supply chain approach, performance measurement systems have also changed and moved towards network and supply chain performance measurement. Therefore, in order to face the storm of great change and transformation and not give in to the wave of competitive aggression, organizations have long had one thing in common, and that is to focus approaches and focus efforts towards achieving results. Results that lead to a competitive advantage and are more effective and decisive in the performance indicators of the organization, including earning more. In this study, in order to identify and prioritize the factors affecting the supply chain in manufacturing companies, using indicators such as cost, timely delivery and procurement time to evaluate the supply chain efficiency is considered. And performance evaluation was performed at the manufacturer level. Therefore, in order to evaluate the performance of the supply chain using the AHP integration approach and the DEA method approach in the fuzzy environment, the suppliers and suppliers of the manufacturing company were evaluated and ranked in terms of performance.
This document discusses developing a balanced supplier scorecard. It begins with an introduction to supplier scorecards and balanced scorecards. It then reviews literature on supplier evaluation models and criteria. Two case studies on Honeywell and Tara Aerospace's supplier scorecards are presented. The document proposes a balanced supplier scorecard with four perspectives: financial, customer, internal processes, and innovation/learning. It identifies shortcomings in current scorecards and suggests enhancements like including environmental and social factors. The conclusion emphasizes that effective scorecards should be flexible, updated in real-time, cost-based, and benchmarked.
An effective way to optimize key performance factors of supply chainIAEME Publication
This document summarizes an article from the International Journal of Management that discusses optimizing key performance factors in supply chain management. The article begins with an abstract that outlines the goal of using analytical techniques to optimize costs in the outward supply chain. It then reviews relevant literature on supply chain performance measurement and modeling supply chain systems. The methodology section outlines the steps taken, which include identifying key parameters that influence performance, formulating the problem as minimizing total supply chain costs given constraints, validating the model, and implementing the solution. The conclusion emphasizes the importance of supply chain performance measurement for competitiveness.
Supply Chain Edge Supply Chain Alignment And Assessment White PaperjoebradySCE
In this white paper, we describe how a comprehensive supply chain assessment can help companies quickly identify the next generation of improvements, prioritize them according to business impact and the needs of critical stakeholders, and build concrete plans for implementing the desired improvements.
Operations Management Processes and Supply Chains Global 11th Edition Krajews...Callahanne
The document discusses several processes and examples of process analysis:
1. It provides discussion questions about various processes involving customer contact at different stages.
2. It discusses hybrid process solutions for hospitality businesses dealing with both tourism and business customers.
3. It compares the processes of eBay and McDonald's, noting how eBay accommodates customer variability while McDonald's reduces it.
4. It discusses potential process improvements in the medical industry through increased electronic file sharing.
This presentation describes the ASQ QMD Globalization & Supply Chain Technical Committee efforts to inventory existing supplier scorecards for benchmarking and to support its efforts to create supplier scorecard standards
johncachat@hotmail.com
www.peproso.com
Solution manual for operations management processes and supply chains 10th ed...Aamir Ali
This document contains 11 discussion questions about operations management concepts. The questions cover topics like identifying core processes, competitive priorities for companies like Amazon and FedEx, designing hospital emergency room operations, and calculating productivity metrics. Sample responses are provided that analyze strategic plans, environmental factors, core competencies, and key capabilities for different organizations.
Analysis The Leanness of The Supply Chain By Fuzzy QFDIJERA Editor
This document discusses using fuzzy quality function deployment (FQFD) to analyze the leanness of a supply chain. It begins with definitions of lean production and its principles. It then discusses using FQFD to identify lean attributes (LAs) and lean enablers (LEs) that contribute to a lean supply chain. A methodology is proposed that uses two houses of quality (HOQs) - the first to prioritize LAs based on competitive bases, and the second to determine relationships between LAs and LEs to identify which LEs should be implemented. Fuzzy logic is used to deal with imprecise assessments in both HOQs. The goal is to help companies achieve a lean supply chain through continuous improvement
Crosscheck: Intergation Methods, Supply Chain Management and the Boeing 787 D...Herbert Ferguson-Augustus
As a part of Communication course at the University of Minnesota, Herbert B. Ferguson-Augustus researched the supply chain management practices at the Boeing Company during the 787 Dreamliner Program. Research focuses on how Boeing integrated its Tier I suppliers into the design and production processes. Research findings are discussed here.
Solutions manual for operations management processes and supply chains 11th e...Brown485
Solutions Manual for Operations Management Processes and Supply Chains 11th Edition by Krajewski
Download at: http://downloadlink.org/p/solutions-manual-for-operations-management-processes-and-supply-chains-11th-edition-by-krajewski/
People also search:
operations management processes and supply chains 11th edition free pdf
operations management processes and supply chains 11th edition pdf
operations management processes and supply chains 11th edition solutions
operations management processes and supply chains 10th edition pdf
operations management: processes and supply chains (11th edition) ebook
operations management processes and supply chains 11th edition answers
operations management processes and supply chains 11th edition test bank
operations management processes and supply chains pdf
Operations Management Processes and Supply Chains 12th Edition Krajewski Test...kalotogub
This document contains a series of multiple choice questions about operations management processes in services and manufacturing. It covers key topics like the different types of processes (front office, back office, hybrid office and line, job, batch, continuous flow processes), how to position processes on matrices based on factors like customer contact and customization, and strategies like make-to-stock and assemble-to-order. The questions test understanding of core concepts around classifying and analyzing different process structures and choices in both manufacturing and service operations.
This document provides an overview of green quality and its relationship to green supply chain management. It discusses how quality and environmental sustainability have become increasingly important to organizations. The significance of considering both quality and the environment throughout the supply chain is explained. Key aspects of green quality are then explored in relation to different supply chain actors like suppliers, manufacturers, and logistics. Examples of companies that have improved their green quality through various initiatives are also provided.
Supply chain cost identification as a means of cost reduction strategy. a ca...Alexander Decker
This document summarizes a research article that examines the supply chain processes of Ghana Supply Company Limited (GSCL) with the aim of identifying non-value adding activities to offer cost reduction strategies. The study used questionnaires and interviews with GSCL procurement, warehousing, and shipping personnel. Findings showed GSCL's supply chain operations are well-coordinated under the director of operations. Activities like procurement, shipping, warehousing and fleet management are integrated. The study also found GSCL uses strategies like proper procurement planning and effective lead time management to reduce supply chain costs.
This article discusses the challenges of developing a common performance measurement system for a collaborative supply chain. Through a case study of a supply chain in the fast moving consumer goods industry, the authors examine two potential collaborative performance measures - inventory levels and product availability. They find that inventory levels cannot reliably be measured collaboratively due to data limitations. Measuring product availability would require a complex information sharing system across the supply chain. The key challenges revealed include underlying data inconsistencies, the need to synchronize business processes, and determining an appropriate collaborative evaluation method.
This document summarizes a research paper that examines the relationship between supply chain management practices (SCMP) and supply chain performance (SCP) in the electronics industry in Malaysia. The study tested a research framework using a structural equation modeling method. The results indicate that six of the seven dimensions of SCMP have a significant positive effect on SCP. The dimension of "agreed vision and goals" showed the greatest influence on SCP compared to the other SCMP dimensions. The study provides insights for SCM practitioners and policymakers on how SCMP can increase competitiveness and SCP in manufacturing industries.
This document summarizes a research paper that studied supply chain management practices (SCMP) in the electronics industry in Malaysia and their impact on supply chain performance (SCP). The study used a quantitative survey of 125 electronics firms. The results of a structural equation model indicate that six of the seven dimensions of SCMP studied (agreed vision and goals, information sharing, supply chain leadership, customer relationship, quality management and postponement) had a significant positive effect on SCP. Agreed vision and goals showed the greatest influence on SCP compared to the other SCMP dimensions. The study helps provide insights into important SCMP for improving competitiveness and SCP in manufacturing industries.
The document presents a framework for measuring supply chain performance. It discusses the importance of performance measurement in supply chain management and reviews relevant literature. The framework was developed based on literature and an empirical study of British companies. The framework considers performance measures at strategic, tactical, and operational levels for key supply chain activities like planning, sourcing, production, and delivery. It aims to promote a better understanding of supply chain performance measurement and stimulate further research.
JOSCM | Journal of Operations and Supply Chain Management - Volume 8 number 2 - July/December 2015
This issue of Journal of Operations and Supply Chain Management counts with eight papers that focus on strategic, tactical and operational aspects of supply chain management.
The paper from Nyaoga, Magutu and Aduda (2015) explores the link between supply chain strategies and firm performance. Based on data from 627 companies, the authors show that supply chain strategies account for a significant share of firms´ performance; reinforcing that companies should investments in supply chain practices. Radanliev (2015), in its turn, develops a framework based on the supply chain architecture, design, and engineering literature that offers guidelines on how practitioners can decompose and build a green-field (new and non-existent) supply chain. We also have three papers on specific supply chain strategies. Pereira and Silva (2015) and Bradaschia and Pereira (2015), for instance, explore the concept of supply chain resilience and its antecedents. With the use of case studies, the former shows how the management of buyer and supplier interfaces, of risk, and of knowledge can enhance resilience in a supply chain while the latter adds that flexibility is also a vital enabler of supply chain resilience. Ferreira, Bertan and Pimenta (2015) then show the importance of inter-organizational integration to achieve the outcomes expected by companies.
This volume also counts with papers focused on logistic services, transportation, and inventory management - key decision areas in supply chain management. Liane Okdinawati, Simatupang and Sunitiyoso (2015) review the literature on collaborative transportation management and suggest areas for future research in the field and Yang (2015) provides an overview of the third-party logistics providers in the United States for investigating how the industry has evolved to meets customers' needs in an environment marked by global supply chains. Finally, this issue has a technical note on a stochastic two-echelon model to solve the petrol station replenishment problem. This model offers insights on how firms can devise a replenishment policy to minimize inventory costs, in the long run, given the demand pattern.
For more information on this issue, visit the FGV Library System: http://bit.ly/2livlzW
Critique on papers related to supply chain management Trushart Wagh
The document summarizes and critiques several papers related to supply chain management. It discusses key topics like:
- Factors that affect the implementation rates of energy and productivity recommendations in small to medium companies.
- How Advanced Product Quality Planning (APQP) can help small to medium industries improve quality.
- The need for sustainability to be incorporated into supply chain management to create long-term profitability.
- A multidimensional framework that was developed to comprehensively evaluate the performance and sustainability of supply chains. This framework accounts for economic, environmental, social and temporal dimensions.
Determinants of Supply Chain Performance of Indian Manufacturing OrganizationsWaqas Tariq
This paper aims at proposing various determinants of supply chain performance of Indian manufacturing organizations. The determinants are summarized based on extensive literature review of empirical research articles on supply chain management (SCM) and performance measurement approaches. This study is a part of a larger research project exploring SC related practices. A critical analysis is carried out so as to identify research gaps in context of performance measurement of supply chains, as well as to propose directions for future research. A conceptual model is also proposed. Critical investigation of selected articles led to an idea that there can be significant effect of selected variables on SC Performance. It is to be seen that how various parameters, taken from the literature review, affect SC performance and ultimately contributing to its competitiveness. The various parameters like supplier-buyer relations, external supply chain, environmental factors, human metrics, information sharing and performance measurement approaches are taken in a single study in the context of Indian manufacturing organizations. Based on a pilot study with sample size of 100, empirical tests resulted in reduction of items. Based on the obtained results, the organizations can enhance the SCM performance by improving the current practices/strategies through focusing on the determinants that significantly influence SCM performance. Further research can be carried out by using data of various supply chains of other sectors and industries of India to generalize the research.
Determinants of Strategic Supply Chain Management in Enhancing Organization P...paperpublications3
Abstract: The purpose of the study was to investigate the determinantsof strategic supply chain management in enhancing organization performance, a case of Eldoret Water and Sanitation Company. The target population consisted of all the managers and employees at ELDOWAS. The study adopted a descriptive survey research design, in which both stratified and simple random sampling techniques were utilized in selecting the participants for the study. This study used a sample of 60 employees and management representatives. Questionnaire, interview schedule and document analysis were be used to collect data. Data was analyzed using descriptive statistical technique that included frequencies, percentages and means. Findings of the study found out that 53.3% of organisation performance was influenced by the four determinants studied in the research. Results on coefficient of variation showed that a unit change in supply chain infrastructure would affect organisation performance by (0.14β1), resource sharing (0.062β2), information flow (0.457β3) and organisation linkage (0.215β4). All the four determinants looked in this research were found to have positive influence; supply chain infrastructure (r=0.505), resource sharing (r=0.567), information flow (r=0.705) and organisation linkage (r=0.322) on organisation performance. The study recommends that ICT should be fully integrated and utilised in sharing information between the organisation and partner in the supply chain management, information systems and flow need to be enhanced to ensure that the suppliers and customers receive it on time.
The document outlines a thesis proposal on designing a supply chain for MEAD Food Complex Company to minimize costs. The objectives are to evaluate the company's current supply chain strategy, assess supplier locations and numbers, determine optimal transportation methods, and design an optimal distribution system. A literature review identified challenges in supply chain design and coordination across organizations. The methodology will use a multi-criteria decision-making approach with data collection from company reports and site visits to model and analyze the supply chain network. The results aim to provide a new optimal supply chain design to reduce MEAD's costs and improve customer satisfaction.
Determinantsof Strategic Supply Chain Management in Enhancing Organization Pe...paperpublications3
Abstract: The purpose of the study was to investigate the determinantsof strategic supply chain management in enhancing organization performance, a case of Eldoret Water and Sanitation Company. The target population consisted of all the managers and employees at ELDOWAS. The study adopted a descriptive survey research design, in which both stratified and simple random sampling techniques were utilized in selecting the participants for the study. This study used a sample of 60 employees and management representatives. Questionnaire, interview schedule and document analysis were be used to collect data. Data was analyzed using descriptive statistical technique that included frequencies, percentages and means. Findings of the study found out that 53.3% of organisation performance was influenced by the four determinants studied in the research. Results on coefficient of variation showed that a unit change in supply chain infrastructure would affect organisation performance by (0.14β1), resource sharing (0.062β2), information flow (0.457β3) and organisation linkage (0.215β4). All the four determinants looked in this research were found to have positive influence; supply chain infrastructure (r=0.505), resource sharing (r=0.567), information flow (r=0.705) and organisation linkage (r=0.322) on organisation performance. The study recommends that ICT should be fully integrated and utilised in sharing information between the organisation and partner in the supply chain management, information systems and flow need to be enhanced to ensure that the suppliers and customers receive it on time.
Keywords: Determinants, Information flow, Infrastructure,Supply Chain Management & Resource sharing.
A new fuzzy dematel todim hybrid method for evaluation criteria of knowledge ...ijmvsc
Knowledge management (KM) adoption in the supply chain network needs a good investment as well as
few changes in the culture of the entire SC. Knowledge management is the process of creating,
distributing and transferring information. The goal of this study is to Rank KM criteria in supply chain
network in Iran which is important for firms these days. Criterion used in this paper were extracted from
the literature review and were confirmed by supply chain experts. The proposed approach for ranking and
finding out about these criterion is hybrid fuzzy DEMATEL-TODIM, with using fuzzy number as data for
our studies we could avoid uncertainty. The data was gathered from PhD. And Ms. Students in industrial
engineering of Kharrazmi university of Tehran and PhD. And Ms. Students of the management department
of Semnan university. A new hybrid approach was used for achieving the results of this study. This new
hybrid approach ranks data criteria respect to each other, then by using TODIM for ranking respect to
the best situation (gains), the rates of criterion were determined which is a very important advantage.
An Empirical Review On Supply Chain IntegrationStephen Faucher
This document summarizes an empirical review of 152 articles on supply chain integration published between 2000 and 2012. It categorizes the articles into three perspectives: vertical integration between organizations in the supply chain, functional integration across departments within organizations, and integration models. The review finds literature on topics like the relationship between lean production and information/physical flow integration, frameworks for measuring supply chain performance, and how supplier integration practices can impact organizational performance. It aims to identify gaps in the current research and provide directions for future studies on supply chain integration.
EFFECTS OF SUPPLIER EFFECTIVENESS ON ORGANIZATION PERFORMANCE AT KENYA SEED C...paperpublications3
This document summarizes a research study on the effects of supplier effectiveness on organizational performance at Kenya Seed Company in Kitale, Kenya. The study aims to determine the impact of supplier agility, process visibility, supplier willingness, and supplier capabilities on an organization's operational, relational, and transformational performance. A sample of 190 employees from Kenya Seed Company participated in focus groups, interviews, and surveys. The findings showed that supplier effectiveness can significantly influence organizational performance both positively and negatively. Specifically, all four components of supplier effectiveness were found to impact the three dimensions of organizational performance. When supplier effectiveness is high, organizational performance is also high. Therefore, developing effective supplier relationships is concluded to be an important strategic tool for improving performance.
1) The document proposes an integrated model for performance management of manufacturing units that combines performance measurement and improvement.
2) Performance is measured using an extended Brown-Gibson model considering objective and service quality factors evaluated through analytic hierarchy process.
3) If performance measures do not meet satisfactory levels, quality function deployment is used to redesign manufacturing processes.
Analysis of ship to use program stu a case study to investigate the effectiveIAEME Publication
This document analyzes the effectiveness of a supplier certification program called Ship To Use (STU) for a manufacturing company. It first reviews literature on supplier development programs and their benefits. It then describes the STU program and process for the case company. The methodology section proposes collecting supplier data from the SAP system to identify STU parts from previous and current years, and compare parts withdrawn due to quality issues to calculate STU program effectiveness. Analysis of 196 suppliers found the STU program to be 90.22% effective in maintaining supplier quality based on this metric. The study provides a method to evaluate certification program effectiveness.
Toc Approach for Supply Chain Performance EnhancementWaqas Tariq
Field of Supply Chain Management witnessed rapid growth in recent past and proved to be a successful tool for organizations growth. Success of supply chain improvement initiative lies in selection of appropriate Key Performance Indicators (KPIs) using best suitable supply chain framework. These KPI’s are to be measured, monitored and controlled with proper review mechanism. This study presents a methodology for identification of the constraint KPI from the supply chain metrics. Selection of the KPI’s is done using Supply Chain Operations Reference (SCOR) framework. Analytical Hierarchy Process (AHP) is used for decomposing the goal into micro level for analyzing and prioritizing KPIs. Subsequently, benchmarking study is carried by comparing foundry industry KPIs with global best practice industry average. Goal Programming function is formulated using AHP ratings and solved using WINQSB software. Finally Theory of Constraint (TOC) management philosophy is applied for finding the constraints for supply chain performance enhancement.
Relationships among Supplier Selection Criteria using Interpretive Structural...inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Download Link > https://ertekprojects.com/gurdal-ertek-publications/blog/modelling-the-supply-chain-perception-gaps/
This study applies the research of perception gap analysis to supply chain integration and develops a generic model, the 3-Level Gaps Model, with the goal of contributing to harmonization and integration in the supply chain. The model suggests that significant perception gaps may exist among supply chain members with regards to the importance of different performance criteria. The concept of the model is conceived through an empirical and inductive approach, combining the research discipline of supply chain relationship and perception gap analysis. First hand data has been collected through a survey across a key buyer in the motor insurance industry and its eight suppliers. Rigorous statistical analysis testified the research hypotheses, which in turn verified the validity and relevance of the developed 3-Level Gaps Model. The research reveals the significant existence of supply chain perception gaps at all three levels as defined, which could be the root-causes to underperformed supply chain.
Modelling the supply chain perception gapsGurdal Ertek
This study applies the research of perception gap analysis to supply chain integration and develops a generic model, the 3-Level Gaps Model, with the goal of contributing to harmonization and integration in the supply chain. The model suggests that significant perception gaps may exist among supply chain members with regards to the importance of different performance criteria. The concept of the model is conceived through an empirical and inductive approach, combining the research discipline of supply chain relationship and perception gap analysis. First hand data has been collected through a survey across a key buyer in the motor insurance industry and its eight suppliers. Rigorous statistical analysis testified the research hypotheses, which in turn verified the validity and relevance of the developed 3-Level Gaps Model. The research reveals the significant existence of supply chain perception gaps at all three levels as defined, which could be the root-causes to under performed supply chain.
http://research.sabanciuniv.edu/
This document discusses how supplier relationship management (SRM) can leverage intellectual capital to increase competitive advantage. SRM involves developing close, collaborative relationships with suppliers to gain access to their expertise, experiences, and processes. When technology is integrated into SRM and suppliers share intellectual capital, supply chain efficiency and profitability increase. However, organizations must understand supplier characteristics, the drivers of SRM, and trends to fully realize these benefits through intellectual capital capture and creation within strategic supplier alliances.
Principles of food beverage and labor cost controlslibfsb
The Rush Hour Inn, owned by Kim Rusher, was experiencing declining profits over the past two years despite increasing sales volumes. Her accountant's statement showed a restaurant profit of only $36,117 for the most recent year. In contrast, the Graduate Restaurant nearby, owned by Bill Young, who studied hospitality management in college, had been profitable each year since he opened it four years prior. The key difference appeared to be that Bill paid close attention to controlling costs and maximizing sales through careful management, while Kim had not focused on these important aspects of running a successful foodservice business.
Principles of food beverage and labor cost controlslibfsb
The Rush Hour Inn, owned by Kim Rusher, was experiencing declining profits over the past two years despite increasing sales volumes. Her accountant's statement showed a restaurant profit of only $36,117 for the most recent year. In contrast, the Graduate Restaurant nearby, owned by Bill Young, who studied hospitality management in college, had been profitable each year since he opened it four years prior. The key difference appeared to be that Bill paid close attention to controlling his costs and ensuring they remained in line with his sales.
This document provides a revised curriculum handbook for the Food and Beverage Operations Core of the Associate Degree in Applied Science program. The curriculum was developed as part of the Caribbean Tourism Learning System (CTLS) to standardize tourism education across the Caribbean region. The handbook outlines 11 courses that make up the Food and Beverage Operations Core, including topics like Food Preparation, Sanitation and Safety, Food Science, Bar Operations, and Food and Beverage Management. It also provides information on program objectives, credit hours, internship requirements, and sample semester schedules.
This document outlines a training module on food and beverage operations. It includes a description of the module's aims to provide an understanding of operational and supervisory aspects of running food and beverage establishments. The learning outcomes cover key areas of food and beverage operations. The syllabus details the topics that will be covered in each of the 8 chapters, including food production, purchasing, menu planning, and banqueting. Learners will be assessed through a 2.5 hour exam covering short and long answer questions.
Food safety basics a reference guide for foodservice operatorslibfsb
This document provides guidelines for food safety in foodservice operations. It discusses purchasing safe raw materials, proper receiving, storage, and production practices to prevent foodborne illness. Key points include maintaining proper temperatures, preventing cross-contamination, thoroughly cooking foods, and quickly cooling leftovers. Following these guidelines can help foodservice operations avoid legal and financial costs from foodborne illness outbreaks.
This document appears to be the preface for "The Bar and Beverage Book, Fourth Edition" by Costas Katsigris and Chris Thomas. It provides a high-level overview of the book's contents and goals. The preface notes that owning a bar seems appealing but requires hard work and planning. It discusses challenges the industry has faced with changing demographics and drinking habits. It also covers the increased legal responsibilities for alcohol service. The preface previews that later chapters will cover topics like market research, bar design, equipment, spirits, wine, beer, mixology, regulations, and managing a profitable business. The goal is to prepare readers for both the rewards and responsibilities of bar ownership or employment.
This document appears to be the preface to "The Bar and Beverage Book, Fourth Edition" by Costas Katsigris and Chris Thomas. It provides a high-level overview of the contents of the book, noting that it covers the responsibilities of alcohol service, planning and designing a bar business, an in-depth look at spirits and mixology trends, and regulations for the industry. The preface states that the book aims to prepare readers for the challenges of owning a bar business and realizing the rewards of friends, fun, and profit through hard work and planning. It notes the book addresses how changing demographics and laws have impacted the industry since the first edition was published.
This document provides an introduction to management in the hospitality industry. It discusses the varied roles and opportunities available in hospitality management. The hospitality industry is large and diverse, encompassing food service, lodging, and other sectors. It is also a dynamic industry that is shaped by various economic and social forces. The future of hospitality looks promising, with continued growth expected globally.
The recruiter would be asked questions about career opportunities and paths in both limited-service and full-service hotels, the typical roles and responsibilities of entry-level positions, expectations for advancement, desirable skills and qualifications employers seek, and tips for gaining relevant experience.
The document discusses how the potential future development of artificial general intelligence, known as the singularity, could impact libraries. It considers ideas from science fiction works that envision a future where machine intelligence surpasses human intelligence. The singularity may lead to technologies that vastly enhance human thinking abilities. This could mean that libraries transition to being repositories of older technologies, havens for people who do not use intelligence amplifiers, or even become obsolete if money and jobs are no longer needed. The impact on library budgets is unclear in a post-singularity world.
This document summarizes an article about managing library finances through effective teamwork. It discusses how ancient stories emphasized the importance of teamwork to achieve goals. For libraries, goals may include implementing new systems or gaining funding. Effective team management requires understanding individual team members to foster creativity and avoid costly mistakes. Teams today can be physical or virtual, each with their own challenges to overcome. Managing conflict is also important for team success.
The document discusses issues that libraries face when maintaining services and resources with limited budgets and personnel. It describes how libraries try to please all patrons by offering many services, but this spreads resources too thin. The document advocates that libraries should be willing to discontinue some services in order to focus resources on the most valuable offerings. It provides examples of libraries spending money on duplicative formats of materials and retaining outdated collections and practices. The document encourages libraries to let go of the need to serve all needs and to instead focus on core services.
This document summarizes the findings of two surveys administered in 2009 and 2010 to examine how libraries managed budgets during the recession. Key findings include:
- Budget cuts were worse in 2009 than 2010, suggesting cuts in 2009 were effective.
- Stress levels for librarians were high in 2009 and increased further in 2010.
- Libraries received little cost-sharing help from departments they served.
- Communication, purchasing, and personnel were areas libraries offered best practices for coping with budgets.
This document discusses strategies for making library printing and copying more environmentally friendly. It recommends moving to electronic circulation notices, reserves, and other documents to eliminate paper use. It also suggests setting printers and copiers to default to double-sided printing and draft quality to reduce paper and ink usage. Using recycled paper and soy-based inks can further reduce environmental impact.
This document discusses issues related to salaries and managing turnover among librarians. It notes that librarians tend to share salary information with one another, which can negatively impact recruitment and retention when salaries are too low compared to the market. The document suggests that while factors like workplace culture and job satisfaction are important, salary is often the primary reason why librarians leave positions. It warns that when pay is inadequate, it can spread discontent among current employees and damage an institution's reputation as an employer. Managing pay competitiveness and addressing pay issues proactively are presented as important strategies for retaining talent.
This document is an article from The Bottom Line: Managing Library Finances discussing the benefits of annual dramatic visual changes in libraries. The author argues that resets boost circulation, improve staff engagement with patrons, and provide projects to discuss with elected officials when seeking funding. Resets help libraries speak the "project language" of competing city departments and maintain visibility with officials. The article concludes by encouraging libraries to include at least one dramatic visual change in their annual plans.
This document summarizes strategies for dealing with difficult colleagues as a new employee. It identifies 10 types of issues that may arise, such as rudeness, annoying habits, inappropriate conversations, and not pulling their own weight. The summary provides suggestions on how to address these issues, including trying to understand the reason for the behavior, deciding if it rises to a level that cannot be tolerated, talking to the colleague, involving supervisors, and as a last resort, finding a new job. The goal is to help new employees successfully navigate challenges with colleagues.
This document discusses the management of e-book collections in libraries and the implications for the economic management of libraries. It notes that the addition of digital formats like e-books has led to dramatic changes in how libraries are planned and managed. Specifically, it discusses how e-book collections impact three main areas of library processes: 1) purchasing processes, 2) collection organization processes, and 3) collection circulation processes. Within purchasing, it describes different business models libraries must consider, such as pricing and access models. It also discusses implications for organizing and circulating e-book collections.
This document discusses making the case for in-house training programs in libraries. It argues that conducting training programs in-house allows the training to be tailored to the library's unique culture and strategies. In-house training is also viewed as an investment in developing the skills of existing staff, rather than just a cost. The document provides suggestions for developing an effective in-house training program, including conducting a needs assessment, analyzing jobs and core competencies, and evaluating the long-term impact of the training on both individual skills and organizational performance.
The document discusses using freely available electronic books from databases like Google Books and the Hathi Trust to weed a physical library collection. It notes that the open source GIST Gift and Deselection Manager allows libraries to compare books in their collection to titles available freely online, in order to identify books that could be removed to free up shelf space. The author is interested in using such a tool to streamline the weeding process at their library and better utilize limited resources.
1. The current issue and full text archive of this journal is available at
www.emeraldinsight.com/1463-5771.htm
BIJ
18,6 Supply chain collaboration
performance metrics:
a conceptual framework
856
Usha Ramanathan
Newcastle Business School, Northumbria University, Newcastle upon Tyne, UK
Angappa Gunasekaran
Department of Decision and Information Sciences, Charlton College of Business,
University of Massachusetts, North Dartmouth, Massachusetts, USA, and
Nachiappan Subramanian
Department of Mechanical Engineering, Thiagarajar College of Engineering,
Madurai, India
Abstract
Purpose – Successful implementation of supply chain collaboration (SCC) by Wal-Mart has
encouraged many manufacturing companies, such as Procter & Gamble, Hewlett-Packard Co, and West
Marine Products Inc., to initiate collaboration. Subsequently, collaboration between suppliers and
retailers has become a common practice in many recent supply chains. However, measuring the benefits
of collaboration is still a big challenge. Based on supply chain literature and practice, this paper aims to
propose a conceptual framework and a standard set of metrics to evaluate the performance of SCC.
Design/methodology/approach – The authors discuss two case studies to validate the proposed
model. The case study discussions are appropriate to understand the usage of different performance
metrics in initial and advanced stages of collaboration.
Findings – From the case study it is recognized that the collaborating members in the supply chain
are not able to visualise all possible benefits of collaboration. To surmount this issue, the paper
proposes a framework to study the performance of companies involved in initial and advanced stages
of collaboration.
Originality/value – The classification suggested in this paper on different stages of collaboration
and related metrics can guide researchers and practitioners in manufacturing companies to evaluate
the performance of SCC.
Keywords Collaboration, Performance metrics, Supply chain, Supply chain management,
Manufacturing industries
Paper type Research paper
1. Introduction
Supply chain involves raw material and component suppliers, manufacturers, distributors,
and retailers until the finished products reach end customers. It has been generally agreed
that the performance of the entire supply chain could be improved through collaboration
(Barratt and Oliveira, 2001; Seifert, 2003). The literature reveals that businesses have been
Benchmarking: An International collaborating in general for several decades in many different forms for varied purposes.
Journal Some of the purposes of collaboration are to improve overall business performance,
Vol. 18 No. 6, 2011
pp. 856-872 reduce cost, increase profit, and improve forecast accuracy (McIvor et al., 2003; McCarthy
q Emerald Group Publishing Limited and Golicic, 2002; Matchette and Seikel, 2004). Lucrative benefits of collaboration can
1463-5771
DOI 10.1108/14635771111180734 encourage many supply chain members to initiate the process of collaboration.
2. In general, businesses with similar objectives work closer to achieve excellence in common Supply chain
supply chain processes such as planning, forecasting, and replenishment. The extent and performance
intensity of collaboration may vary greatly based on business objectives, which in turn
decide the success of supply chain collaboration (SCC) (Larsen et al., 2003, ECR Europe, metrics
2002). Owing to cost involved in initiating collaboration, sometimes SCC will be more
viable to suppliers than buyers (Chen et al., 2007) or more viable to buyers than suppliers
(Dong and Xu, 2002). Hence, in the process of SCC, each business needs to weigh their 857
current scenario with past and future. This may include periodic review of performance
of collaboration using a standard set of metrics. Periodic reviews can help improve
collaboration agreement with other supply chain members regularly.
In the literature of SCC, many performance measures have been suggested including
cost, benefits such as profit, lead time, customer satisfaction, inventory, forecast accuracy,
etc. (Chang et al., 2007; Kim and Oh, 2005; Angerhofer and Angelides, 2006; Simatupang
and Sridharan, 2005). Majority of supply chain metrics in the literature are measures of
internal performance of a firm (Lambert and Pohlen, 2001; Barratt, 2004). If information on
performance of supply chain is shared with other partners, then it could possibly improve
the overall efficiency of the supply chain. Simatupang and Sridharan (2004a, b) have
proposed a collaborative performance system consisting of three cycles with respect to
collaborative enablers to improve operational performances. On reviewing the literature of
SCC, we have identified that the performance metrics for SCC were not given adequate
importance as compared to general supply chain performance.
We have also found that there is no specific set of metrics readily available to supply
chain members to measure their performance in SCC at pilot and advanced stages of
collaboration. Hence, we believe that identifying the key metrics to measure the
performance of SCC from suppliers’ or buyers’ viewpoint is indispensable. Therefore, in this
paper, we propose a conceptual framework to measure performance of SCC at initial and
advanced stages of partnership. In line with supply chain literature of collaboration and
performance measurement we have developed a conceptual model for performance metrics.
The major objective of this paper is to suggest a specific set of metrics at early and
advanced stages of collaboration. To facilitate this study, we have attempted to
understand the current status of collaboration in SC through literature review. Then we
have conducted two case studies as this approach will be appropriate to have an in-depth
knowledge on the selected cases in achieving our research objective (Yin, 1994). For case
study, we have considered two manufacturing companies at two different stages of
collaboration. One of the case study companies is practicing “collaborative planning
forecasting and replenishment (CPFR)” for the past four years, whereas the other
company is recently involved in CPFR. Choice of these two cases has been instrumental
in relating our literature findings to match with initial and advanced stages of
collaboration. Further in this article SCC with respect to literature review refers to a
combination of different supply chain practices, whereas in the context of case study,
SCC is specific to CPFR practice.
This paper starts with an introduction to role of collaboration in supply chain and a
review of literature related to performance metrics of SCC. Section 3 proposes various
functional drivers and enhancers for constructing SCC. This section also describes
a conceptual framework on performance metrics of SCC. Section 4 describes and
analyses the SCC at two case companies that practice collaboration at two different
stages. The paper concludes with some scope for future research.
3. BIJ 2. SCC and performance
18,6 2.1 Role of collaboration in supply chain
In order to improve supply chain processes and to gain support from other supply chain
partners, several supply chain management practices such as vendor managed
inventory (VMI), efficient consumer response (ECR), continuous replenishment (CR), and
electronic data interchange have been suggested in the literature. In VMI (developed in
858 the mid-1980s) the customer’s inventory policy and replenishment process are managed
by vendor or supplier. However, VMI’s supply chain visibility has not been found
powerful enough to avoid the bullwhip effect completely (Barratt and Oliveira, 2001).
Here, bullwhip effect refers to amplification of demand fluctuations from downstream to
upstream in supply chain. This drawback of VMI has been successfully modified in the
later versions in different sectors and the derived versions are termed as ECR, CR, etc.
Ever increasing supply chain demands have led to the invention of CPFR (introduced in
late 1990s), another supply chain management practice, which incorporates planning,
forecasting, and replenishment under a single framework (Fliedner, 2003). CPFR has
been introduced as a pilot project between Wal-Mart and Warner-Lambert in the
mid-1990s aiming to develop a supply chain responsive to customer demand. CPFR is a
new collaborative business perspective that combines the intelligence of multiple
trading partners in the planning and fulfilment of customer demand by linking sales and
marketing information (VICS, 2002).
The CPFR framework encourages all partners to share sales, inventory, forecast, and
all related information to improve forecast accuracy (VICS, 2002). Such information
sharing believes to avoid bullwhip effect (Lee et al., 2000; Cachon and Fisher, 2000). This
information exchange is made possible through advanced technology in many retail
sectors (for example, Wal-Mart’s electronic point of sale data is made available to all its
collaborating partners). Quality of information being exchanged among SC partners’
influences the supply chain processes and forecast accuracy (Forslund and Jonsson,
2007). Some of the benefits of SCC such as cost reduction, inventory reduction and
forecast accuracy are revealed through many case studies (Smaros, 2007; Danese, 2007)
and some mathematical models (Lee et al., 2000; Aviv, 2007); but the indicators for
measuring the benefits of collaborations are not clear and precise. We have endeavoured
to group the performance metrics of SCC, identified from the literature, in the
next section.
2.2 Performance metrics for SCC
The primary objective of initiating collaboration in any supply chain is to enhance the
overall performance of supply chain and this can be achieved through the collective
effort of all supply chain members (Angerhofer and Angelides, 2006). Barratt (2004)
identified managing change, cross-functional activities, process alignment, joint
decision making, and supply chain metrics as essential elements for successful SCC.
In these five elements, the first two are related to initial front-end agreement among SC
members and their involvement in SCC. Power sharing and leadership issues are also
included in the front-end agreements. Whilst, supply chain processes and joint decision
making are commonly used in all type of SCC, the supply chain metrics are different
for inter- and intra-– organizational collaborations. Internal and logistics performance
measures are also discussed in recent literatures of SCC. In this paper, we have tried to
identify all possible performance metrics from the literature of SCC with respect
4. to different stages of collaboration. In this attempt, first we have checked the motive of Supply chain
SCC as this will indirectly indicate SC processes to be evaluated. performance
Like-minded people or businesses with similar objectives come closer to form a
group. One or more of them take a leading role in initiating formal collaboration. Then, metrics
interested supply chain members make front-end agreement (VICS, 2002). Top
management decides cross-functional activities and involvement of various
departments in collaboration at functional/operational and strategic level (Ireland and 859
Crum, 2005). Performance at this stage of collaboration is measured through operational
efficiency and risk/return ratio. Hence, business strategy is been considered as one of the
metrics as it measures the functional capability of the SC member for varying market
demand (Akkermans et al., 1999; SCOR model). Although CPFR suggests equal
opportunities to the SC members in collaboration, this is not reflected in practice. Hence,
the order of dominance and decision sharing create a win- win or win- or lose-lose
situation in SCC (Kim and Oh, 2005). Partnership revival or inclusion is considered in
case of unexpected loss/profit or reduction in profit. As various processes of supply
chain (namely planning, forecasting, production, and replenishment) have impact on
cost, profit, inventory levels, stock outs and resource measures, these measures have
been deemed important by many academics and practitioners (Angerhofer and
Angelides, 2006; Gunasekaran et al., 2001). Table I lists the measures of SC from the
literature.
Supply chain models developed after inception of CPFR incorporated some
improvement to the original CPFR framework by measuring its performance
Essential
Role of SCC elements for SCC Performance metrics Authors
Collaborative Cross-functional Business strategies (functional Akkermans et al. (1999) and
planning and activities capabilities), processes SCC (2001) – SCOR model
production, (operational efficiencies), stake
decision making holders view (risk/return ratio)
SCC leadership Order of dominance and decision Kim and Oh (2005),
and power sharing Simatupang and Sridharan
sharing (2004a,b), and Aviv (2007)
Process Cost, profit, excess inventory, Beamon (1999), Lambert
alignment stock-out, resource measure and Pohlen (2001), Dong
and Chen (2005), and
Emmet and Crocker (2006)
Information Joint decision Impact of information quality on McCarthy and Golicic
sharing, making forecasting (2002), Forslund and
forecasting Information Jonsson (2007),
decision making sharing and Raghunathan (2001), and
forecasting Chang et al. (2007)
Managing Reliability, reactivity/flexibility Forme et al. (2007),
changes Angerhofer and Angelides
(external and (2006), and Barratt and
internal) Oliveira (2001)
Replenishment, Internal and Inventory and stock position, Cachon (2001); Ettl et al. Table I.
decision making logistics stock out, lead time, internal (2000), Aviv (2007), Simchi- Supply chain
performance service rate, cross-functional Levi and Zhao (2005), and performance metric and
capability, logistics efficiency Chen and Paulraj (2004) its correlation with SCC
5. BIJ and identifying areas of improvement. Stank et al. (2001) and Rowat (2006) attempted to
18,6 relate internal and external collaboration with logistical service performance. McCarthy
and Golicic (2002) used responsiveness along with other basic measures – cost and
revenue. Chang et al. (2007) claimed that “Augmented CPFR” (an improved model with
third party information) is a better model with improved forecast accuracy and
inventory. In a recent literature on SCC, capacity utilization and supply chain flexibility
860 have also been considered as measures of performance (Angerhofer and Angelides, 2006
and Aviv, 2007).
In the literature, flexibility, and reactivity are used as synonyms to represent ability
of the supply chain in adapting to the changes (Forme et al., 2007; Angerhofer and
Angelides, 2006; Barratt and Oliveira, 2001). Normally, only the changes internal to an
organization have been considered for this purpose. Responsiveness of the SCC is
another metric that has not been discussed adequately in the literature. In recent years,
information exchange has become integral part of SCC processes and hence it also needs
to be measured periodically. Though quality of information is important (Forslund and
Jonsson, 2007; Forme et al., 2007), use of technology for improving quality of information
has not been adequately stressed in the literature. If one could measure the
responsiveness of SC on timely information (timely information to act upon), this will
measure the importance of information exchange in SCC to a larger extent.
Measures of responsiveness and flexibility can reflect a wider perspective of supply
chain performance incorporating suppliers and buyers. Hence, comprehensive view
of performance metrics of SCC need to involve all the metrics mentioned in Table I along
with a few elemental measures such as managing change (use of technology), sharing
performance metrics with customer (responsiveness), and sharing performance metrics
with suppliers (flexibility). While, flexibility measures the ability of adapting to the
changes effectively with available resources, responsiveness can measure the response
of the supply chain for any unexpected changes in demand. Responsiveness is usually
related with innovative products or products with short lead time which decides the level
of collaboration needed (Lee, 2002). Recently, many companies have started giving more
emphasis on the use of information technology and hence IT has become an integral part
of SCC (VICS, 2002). For example, use of barcode and radio frequency identification
technology in the retail sector helps to track point of sale, which in turn makes supply
chain more responsive (Ireland and Crum, 2005). Such technological advancement
makes communication between retailer and manufacturer easier. Hence, in this paper we
have included the use of technology as one of the performance metrics of SCC.
We augment the metrics suggested in the literature with three other important measures
namely flexibility responsiveness and technology in our comprehensive view of
performance metrics of SCC (Figure 1).
Applying all the above measures identified from the literature into a single model to
evaluate a SCC will be a complicate task. However, the objective of SCC and front-end
agreements between SC partners can help to decide on which measures need to be used.
To our knowledge, none of the models listed in Table I has discussed performance
metrics at different stages of SCC. Hence, in this paper, we have attempted to align all
the identified performance measures at two different stages of SCC. In this line, we have
developed a conceptual framework on performance measurement of SCC.
6. Technology Supply chain
performance
metrics
Supplier Manufacturer Retailer
Flexible Responsive
861
Cost, profit, stock-out, and resource measure , Business strategies (functional capabilities), processes
(operational efficiencies), stake holders view (risk/ return ratio), Impact of information quality on
Figure 1.
forecasting, Order of dominance and decision sharing, Inventory & stock position, stock out, lead time,
internal service rate or cross functional capability, logistics efficiency, Reliability, reactivity
Comprehensive view
of performance metrics
Metrics from the literature of SCC
3. Conceptual framework for SCC and related metrics
SCC transforms the partnership from narrower perspective of intra-organizational level
to wider perspective of inter-organizational level (Barratt, 2004). This also incorporates
all or many personnel in strategic- tactical- and operational level. Long-term business
plan is generally decided at strategic level, short-term planning and forecasting is made
at tactical level and day-to-day operations are planned and executed in operational
level. Performance measurement will be complete only if it is conducted at all these three
levels (Gunasekaran et al., 2001, 2004).
Generally, all the companies practicing SCC initially test their performance under
collaboration in a pilot stage. Successful pilot stage may facilitate in further
collaboration (Cassivi, 2006). This is evident from several cases such as Wal-Mart and
Procter and Gamble, and also through our case study analysis of two manufacturing
firms, discussed in the next section. The companies need to have different set of
performance metrics specific to their stage of collaboration. At the same time, the stage
of collaboration is decided by various elements. The elements which form the basis for
initiation of collaboration are common business objectives and supply chain processes
and can be termed as functional drivers. Other elements such as degree of involvement
(joint decision making), use of technology (managing change) and incentive sharing,
which enhance or support the collaboration can be classified as enhancers. We feel that
SCC has two distinct stages – pilot stage when the initial attempts are made to test
SCC, and advanced stage when all the partners are convinced of SCC and are fully
committed. Accordingly, the metrics to measure performance of SCC should be
different for pilot and advanced stages. Measuring functional drivers can give
comprehensive idea on performance of SCC at pilot stage. If the company had other
business goals of achieving responsive supply chain for changing demands, it might
have enhancers in collaboration and related metrics. Measuring functional drivers and
enhancers collectively will represent the performance of SCC in its advanced stage. The
essential elements of SCC suggested by Barratt (2004) serve as a backbone for
proposing this conceptual framework and related metrics.
3.1 Metrics to measure “functional drivers”
As mentioned earlier, functional drivers of SCC include business objectives and
SC processes. Business objectives, such as financial and operational, are main factors to
SCC. Supply chain members who intend to establish their business are keen in
identifying partners with similar objectives to have long-term collaboration.
7. BIJ As the first step for collaboration, the companies form a front-end agreement; this needs
18,6 to be reviewed periodically for any changes and can be measured through cost-benefit
analysis.
Supply chain processes in CPFR framework are divided into four main stages namely
planning, forecasting, production, and replenishment (VICS, 2002). But in the recent
years, handling product returns has also become one of the foremost reasons for SCC
862 (Lambert and Cooper, 2000). Hence, we have included “return” as one more stage in the
supply chain processes. These supply chain processes can be measured through
different possible measures suitable to the adopting company. Some of the suggested
metrics in the literature are capacity utilization, adherence to plan, inventory, stock-outs,
and feedback on returns (Aviv, 2007; Cachon and Fisher, 2000). The feedback from
retailers will be one of the effective measures, as it provides opportunity for
manufacturer to improve the product quality or avoid future error or improve sales
based upon feedbacks of returned items. The flexibility, which measures the efficiency
of SCC with upstream members (suppliers), can be measured through timely delivery of
raw material, availability of material at the time of production on urgent orders, and
service rate.
3.2 Metrics to measure “enhancers”
It is generally agreed that collaboration among supply chain members is built
encompassing their business objectives. When the top management support more
collaboration the company will establish collaboration with more partners and may
invest more on SCC. Hence, degree of involvement is the first enhancer of SCC. Degree to
which supply chain partners involve in collaboration is captured through investment on
collaboration and sharing decision making.
A great deal of business is based on the information sharing and proper use of data.
Accelerated information sharing among all supply chain will increase the reliability of
the order generation (VICS, 2002). Improved forecast accuracy is another motivating
factor of SCC. Achieving forecasting accuracy is mainly through information sharing
among members of SCC. Quality of information adds more value to the process of
forecasting and hence it needs to be measured periodically. Improved forecasting
accuracy will be an indicator of effective information exchange. If technology is used
for exchanging information, its efficiency can be measured through accessibility of
information by supply chain members. Based on this, any business can make decisions
on investment on technology.
Incentive sharing is another important enhancer of SCC, which attracts more
members in collaboration and hence incentive sharing agreement needs periodic
revision. Regular contacts among members of SCC and feedback on performance of
supply chain will help to revive incentive sharing agreement. Responsiveness, which
measures the efficiency of SCC with changing demand in downstream (retailers), could
be measured through product availability.
3.3 Conceptual framework for the whole SCC
Every company taking part in SCC needs to decide on the performance metrics on
functional drivers and/or enhancers to track its success. The conceptual model
developed based on the above discussions is shown in Figure 2. The desired metrics
essential for measuring SCC is listed out in Figure 2 under categories functional
8. Supply chain
Functional Drivers performance
Processes
Plan, Forecast, Produce,
Business objectives
Metrics to measure the performance of SCC metrics
Financial & Operational
Replenish and Return Measuring Functional drivers
- Front end agreements (mutual agreements)
- Business strategy (Profit and loss)
Initiate Collaboration (Initial stage) - Processes (production, forecast accuracy,
replenishment and handling of returned products) 863
- Capacity utilization (production efficiency)
- Adherence to plan (plan vs. actual)
- Availability of material (resource planning
efficiency)
Manufacturer - Inventory (Stock outs /Excess)
(Evaluator) - Service rate (Product lead time measure)
Strategic - Feedback
Supplier Retailer Measuring Enhancers
Tactical
- Decision making sharing (involvement of partners,
Operational involvement in information exchange and
forecasting)
- Investment on communication technologies (support
and financial measure)
- Use of technology (communication, information
exchange & forecasting)
Support Collaboration (advanced stage) - Information sharing &communication (Frequency and
access)
Degree of Information sharing, forecasting - Information quality (accuracy)
Incentive - Forecasting
involvement and technology
- Product availability
- Feedback
Enhancers
Overall effectiveness of SCC
Responsiveness + Flexibility + Technical excellence Figure 2.
Proposed metrics
for SCC framework
drivers and enhancers. In addition, measures on responsiveness, flexibility and
technical excellence can help the company to assess the overall effectiveness of SCC.
Based on this assessment, further changes to the collaboration can be incorporated if
needed.
4. SCC in practice – case study observations
Collaboration and its suitability with the retail sector have been rigorously examined
by numerous researchers (Smaros, 2007; Holweg et al., 2005; Rowat, 2006). In the recent
literature, design for SCC is suggested by Simatupang and Sridharan (2008). But,
research on performance metrics suitable to manufacturing companies is still in its
infancy. This paper studies the performance metrics used in a packaging firm at their
initial (pilot) stages of collaboration. Case of textile company has been used to analyze
the use of metrics in advanced stage of collaboration. The choice of a case is important
as it explores the research question (Eisenhardt, 1989; Yin, 1994) namely the metrics to
measure performance of SCC.
In this research, case studies aim to understand SCC and performance metrics used
at various stages of collaboration. Case 1 is a packaging firm has been involved in SCC
with their downstream members for the past 18 months to control inventory and to
avoid obsolescence. Case 2 is a textile company initiated collaboration before four years
and has well established SCC with their buyers mainly for promotional sales and
forecasting. Although, both these companies are in SCC, the level of collaboration is
different and hence their practice on performance measurement is also different.
9. BIJ We have conducted case studies in two stages. The first stage has been intended to
18,6 study existing SCC and assess its reliability. The second stage of case study is mainly
for the purpose of understanding the metrics used in SCC. Interviews and frequent
visits are the methods adapted to perform the above case studies. Interviews have been
conducted with dependable officers responsible for collaborative relationship among
partners, information exchange, forecasting, and operations. A few interviews have
864 also been conducted with decision makers. The first author has visited the company
several times in the span of two years in order to observe the changes in current
collaborative arrangement in comparison with the sales and order data. Initially, Nvivo
tool has been used to analyse the interview transcripts. Brief description of the case
companies will help readers to understand the SCC in practice.
4.1 Description of case 1
Company background. The packaging company (Case 1) considered for this case was
established in 1966. In its early years, Case 1 produced waterproof packaging materials
and gradually expanded its production base to produce flexible intermediate bulk
containers (FIBC). In the local market, Case 1 is the first manufacturer introducing
FIBC and has nearly 50 percent market share. After 1996, the company has started to
export its products to many international companies in petrochemical industry,
mineral industry, dyes industry, and selected products in pharmaceutical industry.
Case 1 has maintained quality and durability of the packaging material by treating it
with ultra violet (UV) radiation. The company’s global operation requires them to have
partnership with their supply chain partners to survive in the competitive international
business.
Supply chain at Case 1 before collaboration. Raw material suppliers to packaging
industry are available in plenty and hence competition to become a partner in supply
chain is very fierce. Though many raw material suppliers are available, the company
prefers to have collaboration with a few local markets. In this case,
supplier-manufacturer collaboration is simple and straight forward.
As the company has been maintaining a good relationship with their clients, supply
chain members exchanged information related to inventory and demand. The
company builds their demand forecast based on those information from SC members
and resulted in poor forecast accuracy. This has promoted the company to focus on
information accuracy and related problems. Owing to lack of formal agreement among
SC members, the information accuracy has always been uncertain. Without clear vision
on incentive of SCC, no supply chain member has been committed for success of supply
chain performance. As a consequence, forecasted demand from downstream member is
25-30 percent higher than the actual orders. The company essentially produces to
order, though it also produces a limited amount to stock. About 50 percent of the basic
common production process used to be completed based on initial forecast made
through available information. As a result, the company has been facing a problem of
excess inventory of finished and unfinished products. Recently, Case 1 has realized the
importance of collaborative agreement to improve the information quality and
accuracy. New government environmental regulation has forced the company to make
use of raw materials and UV treatment of bags. This has necessitated the company to
upgrade their products or to sell their product quickly before implementation of new
sales regulation. Ultimately the company has incurred a loss at the end of 2006.
10. As-is scenario. In the beginning of the year 2007, the top management of the Supply chain
company engaged in formal supply collaboration to revive its performance. The performance
company has adopted vertical collaboration with suppliers and customers as part of
their external collaboration and also has maintained internal collaboration among metrics
various departments. The company has adopted a transparent profit sharing policy for
SCC and also assured timely delivery for their clients. These two features of SCC have
helped them to get committed involvement of other members. Decision on profit 865
sharing has been bound to the duration of collaboration and proportion of share in SC
activities. Front-end agreement among SC partners has clearly mentioned the role of
each member in SCC. The company has incorporated 40 percent of their clients in
collaboration in its pilot stage of SCC. Partners with similar business objectives and
with further interest in future collaboration have worked together. At the same time,
the company has not invested much on information technology in its pilot stage of SCC.
Most of Case 1’s communication with their customers has been carried out through
iMail Server (iMail is one of the advanced recent communication technology that works
well even in the presence of other servers such as e-mail server, SMTP, POP3, and
IMAP). The company has used information from other partners to make their demand
forecast. This has been fundamental in minimizing forecast errors. Periodically, the
company has measured performance of collaboration through simple measures such
as cost, profit, timely delivery of goods to customers, inventory level, and forecast
accuracy. The above given information on various performance metrics of SCC in
Case 1 and their purposes are further detailed in Table II.
At the end of the next 12 months (end of 2007), the company has achieved 20 percent
inventory reduction and 10 percent overall cost reduction. Improved forecast accuracy
has helped the company on production plan and expansion. Case 1 has reduced their
safety stock level to 10 percent of expected demand as against its earlier 30 percent.
4.2 Description of case 2
Company background. Case 2 is a leading textile manufacturing and exporting firm
located in the main lands of Asia. Case 2 exports to various countries across the globe.
Customized products are embroidered dress materials with exclusive design, and
made-to-measure finished cushions, pillows, and curtains. Standard products are
embroidered material with multiple repeated designs and curtain materials. The
company generally follows make-to-order strategy for its exports and local business of
customized products. A small part of the business (standard products to local markets)
follows make-to-stock strategy with very limited stock that minimizes inventory and
obsolescence cost. Like Case 1, Case 2 also has a strong uninterrupted supplier base for
raw materials. In order to compete with ever growing challenges, the company has
been involved in SCC with other downstream members.
Supply chain at Case 2 at initial stage of collaboration. Like any other company, Case 2
has intended to improve inventory and reduce obsolescence and hence it has involved
in SCC with their suppliers and buyers. Its collaboration with suppliers signifies
a confirmation of availability of material/resources at the time of production. Initial
collaboration with buyers has been very successful to the company in terms of profit.
Case 2 measures their performance every month and analyzes the area of improvement.
Accordingly, at the end of every year (for the first two years) the company revives their
front-end agreement with customers. Except the measure of handling product returns,
11. BIJ
Metrics in use
18,6 Purpose Desired metrics Case 1 Case 2
Initial stage
Initiate and maintain collaboration Front-end agreements x x
Business objective (financial) Business strategy (profit or cost) x x
866 Supply chain process and business Processes
processes On time production – x
Forecast accuracy x x
Timely replenishment x x
Handling product returns – –
Production process Capacity utilization – x
Planning execution Adherence to plan – x
Supplier collaboration Availability of material on time – x
Inventory control Inventory (stock outs/excess) x x
Production/replenishment Service rate – x
Improvement of SCC Feedback – x
Advanced stage
Investment decision in Technology Use of technology –
Future involvement in Decision making sharing
collaboration x
Investment in the state-of-the-art Investment on technologies (IT and
technologies communication) x
Improve SC processes and Information sharing No
collaboration collaboration x
Improve forecast accuracy and SC Information quality (accuracy)
processes –
Table II. Improve forecast accuracy Forecasting x
Purpose of desired Improve inventory position Product availability x
metrics in SCC for case Improvement of SCC Feedback x
companies Efficient use of SCC Managing change of whole SCC x
all the other measures suggested in our conceptual framework have been measured by the
company during their initial period of SCC. On success of initial SCC, the company
intends – to involve in further collaboration with long-term agreements and to engage in
advanced collaboration.
As-is scenario of Case 2. In the advanced collaboration, the company involves all
SCC members into information sharing and collaborative forecasting. Transparent and
timely information has helped them to arrive at a single forecast figure which
improved the forecast accuracy. As production and resource planning are directly
linked to this single forecast figure, the company has reported improved product
availability and adherence to production plan. Case 2’s investment on information
technology and communication devises has helped them to secure exclusive network
for receiving and sending information on sales, inventory and production processes.
This has effected in considerable reduction of logistics difficulties during the time of
replenishment. The company expects to be benefited more from SCC and related
metrics. The measures of performance of SCC in Case 2 and their purposes are given in
Table II.
12. 4.3 Possible scenario with advanced SCC and related metrics Supply chain
Although Case 1 was successful in terms of controlling inventory and related cost, the performance
top management was not sure on further benefits of CPFR as performance metrics
were not clear to them. In its pilot stage of collaboration, Case 1 aimed to improve their metrics
inventory to avoid loss. In this stage, the company must check their efficiency in SCC
through the list of metrics given under “measures of functional drivers”. But Case 1
used only four performance metrics, namely forecast accuracy, inventory level, timely 867
replenishment, and cost, during their pilot stage of SCC.
We have suggested our proposed conceptual framework of performance metrics to
identify the performance of SCC. The first result after implementing the suggested
framework for performance metrics, the company has reported that they could identify
their strength and weakness in SCC under evaluation of each metrics. After calculation,
Case 1 officials have confirmed that they are in a good position after SCC and hence
intended to continue further collaboration with most of the existing partners. They
have also considered revising front-end agreement with some of the SCC members. The
company has also showed their interest in adopting our proposed metrics for SCC
framework as their standard measure.
When the company moves to the advanced stage of collaboration, they need to
measure the effectiveness of enhancers. Collective consideration of functional drivers
and enhancers will help the company to identify its areas of improvement. This
exercise should be repeated periodically to review the front-end agreement on
collaboration.
The cost-benefit analysis of both the companies at the end of 2007 has encouraged
them to invest more on SCC. Hence, in the next stage of collaboration, Case 1 has
decided to invest more on technology to gain access to their clients’ data on real time
basis. They have believed that this could improve quality and visibility of information.
So the company has decided to have set of metrics as given in Table II to measure
performance of SCC at its second stage. However, Case 2 had a well established basic
collaboration and now they are in an advanced stage of collaboration.
Substantial benefit of SCC has encouraged Case 2 to involve in further collaboration
at its next stage. They have also shown interest in exploring the suggested performance
metrics in the advanced stage of collaboration. The company has measured almost all
the measures suggested in our framework. “Product returns” have not been included
in the inventory and hence product has not been realigned. In the advanced stage “use of
technology” and “quality of information” have not been measured. But later during our
discussion, the company has understood the importance of these two measures in their
decision making. The performance of overall SCC through responsiveness, flexibility
and technical excellence for managing changes is another metric that has been viewed
important by the case company to improve their SCC. Table II represents the list of
measures currently being used by the companies for measuring their performance
in SCC. This table also lists the desired set of metrics at pilot and advanced stages of
collaboration. By comparing these two columns of desired metrics and metrics in use
in the Table II, it is clear that the company (Case 2) that aims to have advance
collaboration use more number of metrics than Case 1 that practices pilot stage of
collaboration. However, before establishing further collaboration, Case 1 has been
advised to measure all the desired metrics to evaluate their SCC performance. This
approach can be used as basic guidelines by any firm that is interested in SCC
13. BIJ to measure its performance. Based on the level of collaboration, the top management can
18,6 choose the metrics to evaluate its benefits of SCC.
5. Conclusion and scope for future research
In this paper, we have identified several performance metrics from the existing literature
and through two case studies. We have proposed a set of metrics to measure SCC at its
868 initial (pilot stage) and advanced stages. We have suggested including flexibility,
responsiveness and use of technology as important measures in comprehensive view of
performance metrics of SCC. While, flexibility measures the ability of adapting to the
changes effectively with available resources, responsiveness can measure the response
of the supply chain for any unexpected changes in demand. Evaluating the collaboration
at the time of initiation is suggested through measurement of functional drivers.
Tracking the benefits of collaborative arrangement by measuring enhancers would be
ideal for decision makers to revisit their agreement on SCC. While analysing the case of
packaging firm, we have identified that the technology is not necessarily a key obstacle
but effective communication is vital. Proper uses of technology, flexibility, and
responsiveness have been considered as important criteria for successful SCC by the
case companies. Measures of evaluating these three SCC criteria are termed as overall
performance metrics in the conceptual framework.
Another important observation from the case analysis is that ample availability of
raw material supply or suppliers will engage manufacturers in simple collaboration
with their suppliers mainly for on time material availability. Meanwhile they try to
establish strong collaboration with their buyers in order to improve the product sale,
inventory control, etc. Incentive alignment in collaboration will be beneficial to all
partners involved. One of the observations about utility of production facilities reveals
that the support from suppliers helps to provide raw material on time to make use of
the production capacity to its maximum. Meanwhile, relationship with buyers does
have an indirect impact on production capacity utilization and planning as job
allocation is based on demand. Both the case companies did not have close relationship
with its suppliers compared to buyers. Further research is indeed necessary to identify
the impact of closer partnership with suppliers.
Manufacturers with high degree of collaboration may or may not perform well. But
consistent intervention and necessary changes as required by the system will aid to
improve the performance. In case of no improvement in the performance, the
collaboration can be withdrawn or revamped with new set up. This case study reveals
that the manufacture-to-order type of business requires more support from their buyers
than their suppliers to exchange information, to improve forecasting accuracy, to avoid
inventory and also to achieve overall performance in the supply chain. The same kind
of research can be extended to manufacture-to-stock business or assemble-to-order
type of businesses. Detailed survey-based analysis is also essential to validate the
above framework in future and to standardise for various sectors other than
manufacturing. The case study did not consider number of suppliers as an important
factor due to the availability of sufficient suppliers and their readiness to serve. The
main reason for such attitude is products from packaging industry have got more life
and have more opportunity to sell in the other market’s before their value got eroded.
But collaborative relationship with suppliers will help to reduce excess raw material
inventory. By the way of allotting incentive, manufacturer can involve supplier in SCC.
14. Incentive can be considered as the indirect motivating factor for involvement of supply Supply chain
chain members in collaboration in order to get overall performance lift in the supply performance
chain process. Further research in this line will help to identify some more metrics
related to performance measurement of collaborative supply chain. metrics
References 869
Akkermans, H., Bogerd, P. and Vos, B. (1999), “Virtuous and vicious cycles on the road towards
international supply chain management”, International Journal of Operations & Production
Management, Vol. 19 Nos 5/6, pp. 565-81.
Angerhofer, B.J. and Angelides, M.C. (2006), “A model and a performance measurement system
for collaborative supply chains”, Decision Support Systems, Vol. 42, pp. 283-301.
Aviv, Y. (2007), “On the benefits of collaborative forecasting partnerships between retailers and
manufacturers”, Management Science, Vol. 53 No. 5, pp. 777-94.
Barratt, M. and Oliveira, A. (2001), “Exploring the experiences of collaborative planning
initiatives”, International Journal of Physical Distribution & Logistics Management, Vol. 31
No. 4, pp. 266-89.
Barratt, M. (2004), “Understanding the meaning of collaboration in the supply chain”, Supply
Chain Management: An International Journal, Vol. 9 No. 1, pp. 30-41.
Beamon, B.M. (1999), “Measuring supply chain performance”, International Journal of
Operations & Production Management, Vol. 19 Nos 3/4, pp. 275-92.
Cachon, G. (2001), “Exact evaluation of batch-ordering policies in two-echelon supply chains with
periodic review”, Operations Research, Vol. 49 No. 1, pp. 79-98.
Cachon, G.P. and Fisher, M. (2000), “Supply chain inventory management and the value of shared
information”, Management Science, Vol. 46 No. 8, pp. 1032-48.
Cassivi, L. (2006), “Collaboration planning in a supply chain”, Supply Chain Management:
An International Journal, Vol. 11 No. 3, pp. 249-58.
Chang, T., Fu, H., Lee, W., Lin, Y. and Hsueh, H. (2007), “A study of an augmented CPFR model
for the 3C retail industry”, Supply Chain Management: An International Journal, Vol. 12,
pp. 200-9.
Chen, I.J. and Paulraj, A. (2004), “Towards a theory of supply chain management: the constructs
and measurements”, Journal of Operations Management, Vol. 22, pp. 119-50.
Chen, M., Yang, T. and Li, H. (2007), “Evaluating the supply chain performance of IT-based
inter-enterprise collaboration”, Information & Management, Vol. 44, pp. 524-34.
Danese, P. (2007), “Designing CPFR collaborations: insights from seven case
studies”, International Journal of Operations & Production Management, Vol. 27 No. 2,
pp. 181-204.
Dong, M. and Chen, F.F. (2005), “Performance modeling and analysis of integrated logistic
chains: an analytic framework”, European Journal of Operational Research, Vol. 162,
pp. 83-98.
Dong, Y. and Xu, K. (2002), “A supply chain model of vendor managed inventory”,
Transporation Research Part E, Vol. 38, pp. 75-95.
ECR Europe (2002), European CPFR Insights, ECR European facilitated by Accenture, Brussels.
Eisenhardt, K.M. (1989), “Building theory from case study research”, Academy of Management
Review, Vol. 14 No. 4, pp. 532-50.
Emmet, S. and Crocker, B. (2006), The Relationship – Driven Supply Chain, Gower, Aldershot.
15. BIJ Ettl, M., Feigin, G.E., Lin, G.Y. and Yao, D.D. (2000), “A supply network model with base-stock
control and service requirements”, Operations Research, Vol. 48 No. 2, pp. 216-32.
18,6
Fliedner, G. (2003), “CPFR: an emerging supply chain tool”, Industrial Management þ Data
Systems, Vol. 103 Nos 1/2, pp. 14-21.
Forme, F.G.L., Genoulaz, V.B. and Campagne, J.P. (2007), “A framework to analyse collaborative
performance”, Computers in Industry, Vol. 58, pp. 687-97.
870 Forslund, H. and Jonsson, P. (2007), “The impact of forecast information quality on supply
chain performance”, International Journal of Operations & Production Management,
Vol. 27, p. 90.
Gunasekaran, A., Patel, C. and McGaughey, R.E. (2004), “A framework for supply chain
performance measurement”, International Journal of Production Economics, Vol. 87 No. 3,
pp. 333-47.
Gunasekaran, A., Patel, C. and Tirtiroglu, E. (2001), “Performance measures and metrics in a
supply chain environment”, International Journal of Operations & Production
Management, Vol. 21 Nos 1/2, pp. 71-87.
¨ ˚
Holweg, M., Disney, S., Holmstrom, J. and Smaros, J. (2005), “Supply chain collaboration:
making sense of the strategy continuum”, European Management Journal, Vol. 23 No. 2,
pp. 170-81.
Ireland, R.K. and Crum, C. (2005), “Supply chain collaboration: how to implement CPFR and other
best collaborative practices”, J. Ross Publishing, Fort Lauderdale, FL.
Kim, B. and Oh, H. (2005), “The impact of decision-making sharing between supplier and
manufacturer on their collaboration performance”, Supply Chain Management, Vol. 10
Nos 3/4, pp. 223-36.
Lambert, D.M. and Cooper, M.C. (2000), “Issues in supply chain management”, Industrial
Marketing Management, Vol. 29 No. 1, pp. 65-83.
Lambert, D.M. and Pohlen, T.L. (2001), “Supply chain metrics”, International Journal of Logistics
Management, Vol. 12 No. 1, pp. 1-19.
Larsen, T.S., Thenoe, C. and Andresen, C. (2003), “Supply chain collaboration: theoretical
perspectives and empirical evidence”, International Journal of Physical Distribution
& Logistics Management, Vol. 33 No. 6, pp. 531-49.
Lee, H.L. (2002), “Aligning supply chain strategies with product uncertainties”, California
Management Review, Vol. 44, pp. 105-19.
Lee, H.L., So, K.C. and Tang, C.S. (2000), “The value of information sharing in a two-level supply
chain”, Management Science, Vol. 46 No. 5, pp. 626-43.
McCarthy, T.M. and Golicic, S.L. (2002), “Implementing collaborative forecasting to improve
supply chain performance”, International Journal of Physical Distribution & Logistics
Management, Vol. 32 No. 6, pp. 431-54.
McIvor, R., Humphreys, P. and McCurry, L. (2003), “Electronic commerce: supporting
collaboration in the supply chain?”, Journal of Materials Processing Technology, Vol. 139,
pp. 147-52.
Matchette, J. and Seikel, A. (2004), “How to win friends and influence supply chain partners”,
Logistics Today, Vol. 45 No. 12, pp. 40-2.
Raghunathan, S. (2001), “Information sharing in a supply chain: a note on its value when demand
is non stationary”, Management Science, Vol. 47 No. 4, pp. 605-10.
Rowat, C. (2006), “Collaboration for improved product availability”, Logistics and Transport
Focus, Vol. 8 No. 3, pp. 18-20.
16. SCC (2001), Supply-Chain Operations Reference-Model V5.0, Supply-Chain Council, Atlanta, GA. Supply chain
Simchi-Levi, D. and Zhao, Y. (2005), “Safety stock positioning in supply chains with stochastic performance
lead times”, Manufacturing & Service Operations Management, Vol. 7, pp. 295-318.
Seifert, D. (2003), Collaborative Planning, Forecasting and Replenishment: How to Create a Supply
metrics
Chain Advantage, AMACOM, Saranac Lake, NY.
Simatupang, T.M. and Sridharan, R. (2004a), “A benchmarking scheme for supply chain
collaboration”, Benchmarking: An international Journal, Vol. 11 No. 1, pp. 9-29. 871
Simatupang, T.M. and Sridharan, R. (2004b), “Benchmarking supply chain
collaboration: an empirical study”, Benchmarking: An international Journal, Vol. 11
No. 5, pp. 484-503.
Simatupang, T.M. and Sridharan, R. (2005), “The collaboration index: a measure for supply chain
collaboration”, International Journal of Physical Distribution & Logistics Management,
Vol. 35 No. 1, pp. 44-62.
Simatupang, T.M. and Sridharan, R. (2008), “Design for supply chain collaboration”, Business
Process Management Journal, Vol. 14 No. 3, pp. 401-18.
Smaros, J. (2007), “Forecasting collaboration in the European grocery sector: observations from a
case study”, Journal of Operations Management., Vol. 25 No. 3, pp. 702-16.
Stank, T.P., Keller, S.B. and Daugherty, P.J. (2001), “Supply chain collaboration and logistical
service performance”, Journal of Business Logistics, Vol. 22 No. 1, pp. 29-48.
VICS (2002), CPFR Guidelines, Voluntary Inter-industry Commerce Standards, available at:
www.cpfr.org (accessed January 2007)
Yin, R.K. (1994), Case Study Research: Design and Methods, Applied Social Research Methods
Series, 2nd ed., Vol. 5, Sage, London.
About the authors
Dr Usha Ramanathan is a Senior Lecturer in Logistics and Supply Chain Management in
Newcastle Business School, Northumbria University, UK. Her research interest includes supply
chain collaboration, collaborative planning forecasting and replenishment (CPFR), value of
information sharing and forecasting, structural equation modeling, simulation, AHP and
SERVQUAL. She has published in leading journals such as International Journal of Production
Economics, Expert Systems with Applications and Omega: The International Journal of
Management Science.
Dr Angappa Gunasekaran is a Professor in, and the Chairperson of, the Department of Decision
and Information Sciences at the Charlton College of Business, University of Massachusetts,
Dartmouth. He teaches undergraduate and graduate courses in operations management and
management science. He has over 190 articles published in 40 different peer-reviewed journals,
has presented about 50 papers and published over 50 articles in conferences, and has given a
number of invited talks in about 20 countries. Dr Gunasekaran is on the editorial board of
over 20 journals. He is the editor of several journals in the field of operations management
and information systems. Dr Gunasekaran is currently interested in researching information
technology/systems evaluation, performance measures and metrics in new economy,
technology management, logistics and supply chain management. He actively serves on several
university committees. He is also the Director of the Business Innovation Research Center (BIRC).
Dr Nachiappan Subramanian is an Associate Professor at Thiagarajar College of
Engineering, Madurai, India. Nachiappan (Nachi) has published over 75 refereed papers which
include journal articles and international conference papers. Currently, he is on the editorial
board of the International Journal of Integrated Supply Management and International Journal of
Applied Industrial Engineering. He also serves as a reviewer for many leading operations
17. BIJ and supply chain management journals. In September 2011 he is joining as an associate
professor in operations management at the University of Nottingham Ningbo, China. Previously,
18,6 Nachi conducted his post-doctoral research at University of Nottingham, UK, under BOYSCAST
fellowship program and received the Australian Endeavour Research Fellowship Award to
conduct research on complexity, risks and low-cost country sourcing (with special reference
to India). His research interests are supply chain operations, modeling and analysis of
manufacturing systems, sustainable supplier selection, low-cost country sourcing, supply chain
872 complexity and resilience and reverse logistics. Nachiappan Subramanian is the corresponding
author and can be contacted at: spnmech@tce.edu
To purchase reprints of this article please e-mail: reprints@emeraldinsight.com
Or visit our web site for further details: www.emeraldinsight.com/reprints