This document provides contact and address information for the head office and branch offices of a company that distributes industrial electrical equipment in Vietnam. It lists the addresses, phone numbers, and fax numbers for the company's offices in Hanoi, Cambodia, and Binh Duong. It also includes the company's slogan "Think Together" in Vietnamese.
The document provides information on the Harmony Easy XA2 range of plastic control and signaling units including:
- Pushbuttons, selector/key switches, and emergency stop pushbuttons for machine control applications.
- Illuminated pushbuttons for control and signaling.
- Pilot lights for signaling applications.
- The units have a diameter of 22mm, IP54 protection, and screw clamp terminals for easy installation.
- The range includes spring return and push-push pushbuttons, selector switches, illuminated pushbuttons, and pilot lights.
RT300 series industrial crane joysticks (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the hoist crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
The document describes the design of a machine controller. It includes:
1) The required motions and actions of the press that the controller must perform, such as stopping or changing direction when various switches are pressed.
2) The components needed for the controller, including an Arduino board, relays, switches, and indicators.
3) The circuit diagram and Arduino program for controlling the press motions based on input from the switches.
Electronic multi measuring instrument-me96 series brochure dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
The document describes an industrial flow meter that offers:
1) Various process connections and construction lengths to meet customer needs.
2) Accuracy up to 0.5% with repeatability up to 0.2% across a wide dynamic range.
3) Intuitive operation and monitoring via a swivel display with outputs connecting to control systems.
RT200 Single-axis Industrial Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as Mining hoist machine, Oil hoist, Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle etc.
Điều khiển nhiệt độ - Catalogue điều khiển nhiệt độ HX series (tiếng Anh)
Xem sản phẩm điều khiển nhiệt độ khác và đặt mua tại http://hungphu.com.vn/bo-dieu-khien-nhiet-do.html
Catalog thiết bị đóng cắt Fuji Electric - 04 - Driver Components
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
The document provides information on the Harmony Easy XA2 range of plastic control and signaling units including:
- Pushbuttons, selector/key switches, and emergency stop pushbuttons for machine control applications.
- Illuminated pushbuttons for control and signaling.
- Pilot lights for signaling applications.
- The units have a diameter of 22mm, IP54 protection, and screw clamp terminals for easy installation.
- The range includes spring return and push-push pushbuttons, selector switches, illuminated pushbuttons, and pilot lights.
RT300 series industrial crane joysticks (master controller) are mainly used in the occasion of the harbor, docks, coal, or open-air operations, AC 50Hz, 60Hz voltage 380V and 220V DC to control the hoist crane transport operators as well as the similar electrical control equipment, such as motor starting, speed control and brake.
The document describes the design of a machine controller. It includes:
1) The required motions and actions of the press that the controller must perform, such as stopping or changing direction when various switches are pressed.
2) The components needed for the controller, including an Arduino board, relays, switches, and indicators.
3) The circuit diagram and Arduino program for controlling the press motions based on input from the switches.
Electronic multi measuring instrument-me96 series brochure dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
The document describes an industrial flow meter that offers:
1) Various process connections and construction lengths to meet customer needs.
2) Accuracy up to 0.5% with repeatability up to 0.2% across a wide dynamic range.
3) Intuitive operation and monitoring via a swivel display with outputs connecting to control systems.
RT200 Single-axis Industrial Joystick is mainly used in hydraulic proportional control and variable frequency motor control, such as Mining hoist machine, Oil hoist, Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle etc.
Điều khiển nhiệt độ - Catalogue điều khiển nhiệt độ HX series (tiếng Anh)
Xem sản phẩm điều khiển nhiệt độ khác và đặt mua tại http://hungphu.com.vn/bo-dieu-khien-nhiet-do.html
Catalog thiết bị đóng cắt Fuji Electric - 04 - Driver Components
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
RT02 rugged industrial joystick controller is designed for hydraulic proportional control and variable frequency motor control, such as Construction machinery, Precision machine, Military robotics, Refuse handling trucks, Unmanned vehicles, Rotary drilling rigs, Cranes, Marine etc. Available in one two or three axis configurations, this joystick can be supplied with non-contact Hall effect sensors or long life potentiometer tracks.
Safe communication between remote locations with modular system HImatrix FMinka Grdesic
The HIMatrix F modular system enables safe transfer of digital signals between remote locations via the safeethernet protocol. The main HIMatrix F30 unit connects to remote input/output units to sample and issue digital signals. Supported transmission media include copper, fiber optic, and WLAN connections. The system includes various remote I/O units that provide flexible configuration to meet project needs.
The document provides instructions for installing and connecting a KINAX 3W2 transmitter that converts angular position to a current signal. It describes the transmitter's components, mounting options, electrical connections, and technical specifications. The transmitter can be directly mounted or attached with clips and aligned so its zero point matches the measured component. Wiring must match the transmitter's nameplate and not exceed maximum load resistance. Proper installation and use ensures safe and accurate angular measurement.
Multi measuring instrument new-s series dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
www.ucontrol.com.au - Find the best range of ATR243 controllers comes in three versions. Refer to the table below to easily select your preferred model.
Catalog thiết bị đóng cắt Fuji Electric - Miniature Circuit Breakers BC-E Series - Fuji Electric
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
RT100 industrial joystick controller, is mainly used in hydraulic proportional control or variable frequency motor control, such as Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle, etc.
The document provides information on Crabtree's Platinum KNX range of wiring accessories, which includes KNX-enabled switches and sockets. These products allow building management components like lighting, HVAC, and access control systems to communicate via the KNX standard communication protocol. Crabtree's KNX switches and sockets are available in finishes to match their existing Platinum wiring accessory range. Key details like mounting instructions, terminal connections, programming, and available models/finishes are described for the KNX switches and sockets.
2301 manual (v7.0 - 80384 a) (1) gefranDarío Falquéz
This document provides installation and configuration instructions for a configurable controller with software version 7.0. It includes dimensions for panel mounting, cut-out sizes, and instructions for installing multiple instruments side by side or stacked. It also provides technical specifications for the controller's inputs, outputs, power supply, ambient conditions, control functions, alarms, weight, and includes diagrams of the front panel display and buttons. The document describes hardware configuration options for inputs, outputs, power supply, and serial communication interface.
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers BX Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Air Circuit Breakers BT3 Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCBCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers BX Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Introduction to electrical distribution and control componentsCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - Introduction to electrical distribution and control components
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Hao phuong conpany profile
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
Catalog thiết bị đóng cắt Fuji Electric - FCS/W Port Table Test Kit
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Fuji BC Series MCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
Catalog thiết bị đóng cắt Fuji Electric - BT3 Series Fuji Air Circuit Breaker - Fuji Electric
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers Technical Information
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Air Circuit Breakers BT2 Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
RT02 rugged industrial joystick controller is designed for hydraulic proportional control and variable frequency motor control, such as Construction machinery, Precision machine, Military robotics, Refuse handling trucks, Unmanned vehicles, Rotary drilling rigs, Cranes, Marine etc. Available in one two or three axis configurations, this joystick can be supplied with non-contact Hall effect sensors or long life potentiometer tracks.
Safe communication between remote locations with modular system HImatrix FMinka Grdesic
The HIMatrix F modular system enables safe transfer of digital signals between remote locations via the safeethernet protocol. The main HIMatrix F30 unit connects to remote input/output units to sample and issue digital signals. Supported transmission media include copper, fiber optic, and WLAN connections. The system includes various remote I/O units that provide flexible configuration to meet project needs.
The document provides instructions for installing and connecting a KINAX 3W2 transmitter that converts angular position to a current signal. It describes the transmitter's components, mounting options, electrical connections, and technical specifications. The transmitter can be directly mounted or attached with clips and aligned so its zero point matches the measured component. Wiring must match the transmitter's nameplate and not exceed maximum load resistance. Proper installation and use ensures safe and accurate angular measurement.
Multi measuring instrument new-s series dienhathe.vnDien Ha The
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
Điện Công Nghiệp Mitsubishi, Điện Công Nghiệp,
Điện Hạ Thế Mitsubishi, Điện Hạ Thế,
Điện Dân Dụng Mitsubishi, Điện Dân Dụng,
Mitsubishi,
Thiết Bị Đóng Cắt Mitsubishi, Thiết Bị Đóng Cắt,
Thiết Bị Điện Mitsubishi, Thiết Bị Điện,
www.ucontrol.com.au - Find the best range of ATR243 controllers comes in three versions. Refer to the table below to easily select your preferred model.
Catalog thiết bị đóng cắt Fuji Electric - Miniature Circuit Breakers BC-E Series - Fuji Electric
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
RT100 industrial joystick controller, is mainly used in hydraulic proportional control or variable frequency motor control, such as Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle, etc.
The document provides information on Crabtree's Platinum KNX range of wiring accessories, which includes KNX-enabled switches and sockets. These products allow building management components like lighting, HVAC, and access control systems to communicate via the KNX standard communication protocol. Crabtree's KNX switches and sockets are available in finishes to match their existing Platinum wiring accessory range. Key details like mounting instructions, terminal connections, programming, and available models/finishes are described for the KNX switches and sockets.
2301 manual (v7.0 - 80384 a) (1) gefranDarío Falquéz
This document provides installation and configuration instructions for a configurable controller with software version 7.0. It includes dimensions for panel mounting, cut-out sizes, and instructions for installing multiple instruments side by side or stacked. It also provides technical specifications for the controller's inputs, outputs, power supply, ambient conditions, control functions, alarms, weight, and includes diagrams of the front panel display and buttons. The document describes hardware configuration options for inputs, outputs, power supply, and serial communication interface.
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers BX Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Air Circuit Breakers BT3 Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCBCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - Fuji Molded Case Circuit Breakers BW0 series, 32 Ampere Frame MCCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers BX Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Introduction to electrical distribution and control componentsCTY TNHH HẠO PHƯƠNG
Catalog thiết bị đóng cắt Fuji Electric - Introduction to electrical distribution and control components
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Hao phuong conpany profile
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
Catalog thiết bị đóng cắt Fuji Electric - FCS/W Port Table Test Kit
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Fuji BC Series MCB
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
Catalog thiết bị đóng cắt Fuji Electric - BT3 Series Fuji Air Circuit Breaker - Fuji Electric
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Molded Case Circuit Breakers Technical Information
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Catalog thiết bị đóng cắt Fuji Electric - Air Circuit Breakers BT2 Series
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
The document provides instructions for a Fuji Electric BT2-series air circuit breaker. It includes safety notices regarding transportation, installation, operation, maintenance and inspection. Transportation precautions include not standing under lifted circuit breakers. Installation precautions involve environment conditions, preventing foreign objects from entering, and properly tightening terminals. Operation precautions discuss not touching live parts and following motor voltage ranges. Maintenance precautions involve isolating power, avoiding dust, and releasing closing springs before work.
Hao Phuong Company is the distributor of industrial power
and automatic products such as: Fuji Electric, Idec Izumi, Kansai Automation, Circutor, Nichifu, TOGI (Toyogiken)... - www.haophuong.com
Bảng giá thiết bị tay nắm tủ, khóa tủ điện, bản lề, thanh ray tủ điện, phụ kiện tủ điện...thương hiệu TAKIGEN (Nhật bản) - Công ty TNHH Hạo Phương - www.haophuong.com
http://haophuong.com/takigen/1578051.html
The document introduces the BT3 series of air circuit breakers produced by Fuji Electric, which come in four frame sizes ranging from 1600A to 6300A. The breakers have compact designs and can provide breaking capacities of up to 120kA. They are available as fixed or draw-out installations with manual or motorized operating mechanisms. The breakers also include protection functions and can be used with optional intelligent controllers that provide monitoring and control capabilities.
This document provides information on Zelio Time timing relays, including:
- An overview of the Zelio Time product line which includes DIN rail mounted, miniature plug-in, and panel mounted timing relays.
- Definitions of relay terms such as output type, minimum switching capacity, and timing functions.
- A selection table that allows choosing the appropriate timing relay based on required functions, timing range, supply voltage, output type, and rated current.
Catalog đèn báo nút nhấn Fuji Electric Nhật bảnBeeteco
Catalog đèn báo nút nhấn Fuji Electric Nhật bản
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
MIfa Systems is an Electronic Instrument & Equipment based private company, engaged in offering Digital Temperature Controller with advanced microcomputer including leading-edge sensor, therefore ensuring precise temperature calibrating and controlling operations. Driven by technical excellence,
http://www.mifasystems.com/
The document is a catalog for Steven Engineering's Harmony XB7 monolithic 22mm push buttons. It includes an overview of the product, which is compact and robust push buttons for control systems. It also includes specifications, dimensions, mounting instructions, and contact information for Steven Engineering and a Vietnamese company.
NTO specializes in designing, developing, manufacturing, and supplying hot air solder leveling equipment for the printed circuit board industry. Their main business is manufacturing hot air solder levelers in various sizes from 18"x18" to 30"x30" that feature adjustable air knives, easy maintenance access, and PLC control options. The solder levelers are designed for reliability with components from trusted manufacturers and safety features. Optional configurations allow for flexible PCB processing and remote maintenance capabilities.
This document provides an installation and user manual for the CHOPPER SEM2 electronic speed controller.
It begins with an introduction to the ZAPI-MOS family of speed controllers and their key features including advanced technology, flexibility, safety, and openness to future innovations.
The document then provides details on the technical specifications, control units, safety features, directions, operations, diagnostics, thermal considerations, and instructions for the SEM2 speed controller. It includes sections on installation, programming adjustments, traction applications, diagnostics, spare parts, and maintenance.
The document discusses electric panel manufacturing. It provides an overview of Pyrotech Electronics Pvt. Ltd., which manufactures control panels, wired panels, and mosaic panels. The presentation then covers the various types of panels produced, including instrumentation control panels, PLC panels, relay panels, mimic panels, and mosaic panels. It describes the stages of manufacturing from engineering to assembly and packing. Key machines used are CNC machines and various finishing processes like painting/powder coating are outlined. Major customers and a conclusion on the importance of electronic panels are also mentioned.
This document provides product specifications for the U-TD03 Touch Panel Dimmer, including:
- It is a new high-end touch panel controller developed by the company with a glass panel design.
- It uses a high precision capacitive touch chip for increased sensitivity and reduced accidental triggers.
- It can control various LED lights like point light sources, flexible strips, and panel lights.
This document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, selector switches, and key selector switches. It lists various models with different configurations of buttons, lenses, contacts, and circuits. It also provides detailed dimensional drawings, installation information, ratings, certifications and other technical specifications. The units have compact and rugged designs that meet international safety standards for applications in industrial control panels.
The document provides information about the MX08/2 multiplexing control unit, including:
1) It functions as a controller within the SIKONETZ fieldbus system to program and control connected devices, and as an interface converter between the fieldbus and a central control system.
2) As a controller, it allows displaying, programming, and positioning connected devices like encoders and displays. As an interface, the control system can access the fieldbus devices.
3) An example application uses an MX08/2 with six absolute position displays to adjust the spread width at three stations on a wood chip board production line.
This document summarizes an electronic pressure sensor and manometer. It has a fully electronic design that combines the advantages of an electronic pressure sensor with the high visibility of an analog display. It features configurable functions like set/reset points, output signals, damping, and calibration. It is suitable for hygienic applications and harsh conditions due to its durable ceramic sensor and lack of mechanical components. The document provides technical specifications, ordering information for different models, and accessories like process adapters.
The document describes Harmony wireless, batteryless push buttons that provide simplified machine cabling by allowing completely wireless control through radio transmission, without needing batteries. The push buttons include ready-to-use packs that combine a transmitter push button and receiver in one package. They reduce installation time and costs compared to hard-wired solutions.
Micronics U1000-HM Clamp On Ultrasonic Heat Meter - User ManualThorne & Derrick UK
This document is the user manual for the Micronics U1000-HM Clamp On Ultrasonic Heat Meter. It provides instructions on installing and operating the heat meter, which uses ultrasonic sensors to measure flow rate and temperature sensors to calculate energy transfer. The manual describes how to mount the sensors to the pipe, enter parameters, view readings and access password protected menus to change settings. It also provides specifications, default values, error messages and declarations of conformity for the U1000-HM heat meter.
This document provides a catalog of Senco professional fastening tools and accessories. It begins with listings of cordless finish nailers and their features. Further sections cover other cordless and pneumatic tools for framing, sheathing, roofing, siding, flooring, stapling, and specialty applications. Accompanying items include compressors, screw systems, fasteners, and other accessories. The catalog aims to provide contractors and professionals with innovative solutions to maximize productivity and make hard work easier.
ANTI-INTRUSION SYSTEMS
While comfort is a priority in all modern homes, security of its inhabitants and of their property is essential.Security from possible intrusions while at home and the ability to report danger to law enforcement are crucial for living your home in a sound and peaceful manner.
The he¡ security system allows you to control access to every room of the house, to report danger to designated telephone numbers and control the array of functions remotely via SMS. Moreover, thanks to the terminal graphical interface, which shows the floor plan of the house and position of the alarm detectors,using the alarm system is a simple and intuitive task even dealing with a vast and complex system.
The system also reports technical alarms from gas and water leak detectors to prevent any structural damage to the building.Home, people and property always safe!
A6 v10370250 variable speed drive for pumps and fans sinamics g_entekhakko
The document provides information on SINAMICS G120P variable speed drives for pumps and fans. It summarizes the key features and functions as:
- Power range from 0.75 kW to 75 kW for controlling pump and fan motors with standard fieldbus interfaces.
- Integrated functions for pumps and fans like automatic restart, ECO mode, and PID controllers.
- IP55 and IP20 enclosure options with integrated EMC filters.
- Optional interfaces include PROFIBUS, CANopen, and PROFINET.
- Includes commissioning software and is compatible with Desigo building automation systems.
This document provides information on the Si5580 Programmable Step Motor Drive from Applied Motion Products, including its features, specifications, and recommended NEMA 23 and 34 stepper motors to use with the drive. The Si5580 allows software control of motor current, resolution, idle current reduction, and has 8 programmable inputs and 3 outputs. It can drive 4, 6, or 8 lead stepper motors and includes programming software.
Siemens' SIMATIC S7-200 SMART PLC offers an affordable and flexible automation solution for developing markets. It provides a range of CPU modules with integrated I/O and communication ports. Additional I/O and communication can be added via cost-effective signal boards. The PLC uses a high-speed processor and user-friendly software to provide powerful motion control, networking, and programming capabilities despite its low cost. It can be integrated with other Siemens products to create complete automation solutions for applications like packaging machines.
Quickly design infrared body temperature detectorVinsion Chan
Body temperature testing is necessary monitoring in our homes, in and out of the community or workplace, and during travel. Infrared body temperature detector helps reduce contact infection through non-contact temperature measurement. Here we come to talk to you about this system and the main design plan.
Similar to Command Switches Integrated contact structure (20)
Hạo Phương xin giới thiệu đến quý khách hàng cách cài đặt cơ bản dòng biến tần MD290. Biến tần Inovance MD290 là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD290 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, máy chế biến gỗ,…
Hạo Phương xin giới thiệu đến quý khách hàng cách cài đặt cơ bản dòng biến tần MD290. Biến tần Inovance MD290 là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD290 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, cắt, máy chế biến gỗ,...
This document announces the discontinuation of several control unit products from IDEC Corporation. It provides details on products being discontinued, their recommended replacements, and last order and delivery dates. Key products being discontinued include LED illuminated white colored products, control units with 6V AC/DC illumination ratings, some emergency stop switches and selector switches, and other low selling items. Replacements or last order dates are provided for most discontinued products.
Những lưu ý khi sử dụng máy lọc nước tại vòi Cleansui CSP601CTY TNHH HẠO PHƯƠNG
Bạn vừa mới mua sản phẩm máy lọc nước tại vòi Cleansui CSP601, và lo lắng không biết sử dụng như thế nào đúng cách. Dưới đây là một số lưu ý mà chúng tôi đưa ra giúp bạn đảm bảo an toàn cũng như là đảm bảo nguồn nước sạch khi sử dụng sản phẩm.
Beeteco xin gửi đến quý khách bảng giá biến tần Inovance mới nhất 2020 bao gồm giá chi tiết của các dòng sản phẩm:
Biến tần Inovance MD200
Biến tần Inovance MD290
Biến tần Inovance MD310
Biến tần Inovance MD500
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Inovance MD500. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
The document is a user guide for the MD310 AC drive from Shenzhen Inovance Technology Co., Ltd. It provides information on product specifications, wiring, setup, troubleshooting, and parameters. The guide covers safety precautions, nameplate details, terminal descriptions, typical wiring diagrams, easy setup instructions, fault solutions, and tables of general and monitoring parameters.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Inovance MD290. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
This document provides product information for MD200 AC drives, including:
- General specifications such as dimensions, voltage classes, power ratings, and carrier frequencies for different models.
- Technical specifications covering control modes, overload capacity, V/F curves, acceleration/deceleration profiles, and DC braking functions.
- Nameplate information including model numbering conventions and certification markings.
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD500 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
Contact:
Trụ sở TP.HCM: Số 139-141 đường Phú Châu, Kp. 1, P. Tam Bình, Q. Thủ Đức, Tp. Hồ Chí Minh
Tel: (028) 3636 5671|2|3 - Fax: (028) 3636 5674
Trụ sở Hà Nội: P502 tầng 5, tòa VP số 15 ngõ 2, Phố Thọ Tháp,P. Dịch Vọng, Q. Cầu Giấy, Hà Nội
Tel: (024) 320 11 408 | 320 11 410
Email: contact@beeteco.com - MST: 3702357207
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD310 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
The document provides instructions for using an AC drive product from Inovance. It includes information about nameplate and model number, components, technical specifications, dimensions, system connections, installation, wiring, operation, maintenance and safety precautions. The document is the user guide for Inovance MD290 series AC drives for power ratings between 500-630 kW.
Beeteco xin gửi đến quý khách hàng Catalog biến tần Inovance dòng MD200 với đầy đủ thông tin về sản phẩm, kích thước, những lưu ý để sử dụng thiết bị hiệu quả.
Biến tần Inovance là dòng sản phẩm đa năng rất dễ sử dụng và đem lại hiệu quả cho việc điều khiển tốc độ động cơ và các ứng dụng đặc biệt khác. Biến tần Inovance MD200 dùng cho các ứng dụng: điều khiển băng tải, bơm chân không kiểu piston, vận chuyển vật liệu, cắt, máy chế biến gỗ,...
Thông tin liên hệ:
Trụ sở TP.HCM: Số 139-141 đường Phú Châu, Kp. 1, P. Tam Bình, Q. Thủ Đức, Tp. Hồ Chí Minh
Tel: (028) 3636 5671|2|3 - Fax: (028) 3636 5674
Trụ sở Hà Nội: P502 tầng 5, tòa VP số 15 ngõ 2, Phố Thọ Tháp, P. Dịch Vọng, Q. Cầu Giấy, Hà Nội
Tel: (024) 320 11 408 | 320 11 410
Email: contact@beeteco.com - MST: 3702357207
Beeteco gửi đến quý khách hàng catalog thiết bị điện của thương hiệu Vteke. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
=========================================
Beeteco.com@ Công ty TNHH Thương Mại Kỹ Thuật ASTER
Hotline: 0909.41.61.43
Email: contact@beeteco.com
Fanpage: www.facebook.com/beeteco
Địa chỉ: 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 – KĐT Mỹ Đình Sông Đà – Phường Mỹ Đình – Q. Nam Từ Liêm – Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com – Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
The document announces that several HG series operator interface products will be discontinued due to parts no longer being available from suppliers. It provides details on the specific products being discontinued, their recommended replacements, and the schedule including last order and delivery dates. Support for maintenance will be available until late 2026 depending on remaining stock. Customers are advised to place final orders by November 2019 to ensure supply of the discontinued products.
Màn hình cảm ứng dòng V9 là sản phẩm của nhà sản xuất Fuji Electric. Với khả năng giao tiếp mạnh mẽ, đáp ứng được yêu cầu trong tất cả các ngành công nghiệp.
HMI Fuji Electric dòng TS là sản phẩm có khả năng giao tiếp mạnh mẽ, TECHNOSHOT đáp ứng được yêu cầu trong tất cả các ngành công nghiệp. Sản phẩm có giao diện được lập trình một cách trực quan nhất, màn hình với độ sắc nét lên đến 64k màu. Tấm nền TFT cho độ sáng cao và có khả năng tái tạo màu tốt.
The BM3RSB- and BM3RHB- series are 32AF manual motor starters that provide adjustable thermal-magnetic trip protection for motors up to 15kW. They have standard breaking capacities of 25-100kA and compact dimensions. Accessories include auxiliary contact blocks, undervoltage trip devices, and enclosures.
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
Generative AI Use cases applications solutions and implementation.pdfmahaffeycheryld
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Software Engineering and Project Management - Introduction, Modeling Concepts...Prakhyath Rai
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Accident detection system project report.pdfKamal Acharya
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...PriyankaKilaniya
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...Transcat
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Height and depth gauge linear metrology.pdfq30122000
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
2. Ha Noi Office:
No. 95 - TT4, My Dinh Urban Area,
My Dinh, Nam Tu Liem, Hanoi.
Tel: (84 4) 3568 3740
Fax: (84 4) 3568 3741
Cambodia Office:
#140, Room 1-B, St430, Sangkat Toul
Tompuong II, Khan Chamkamon, PP.
Tel: 855 2322 3635
Fax: 855 2322 3645
Head Office:
No 88, Vinh Phu 40, Hoa Long,
Vinh Phu, Thuan An, Binh Duong.
Tel: (84 650) 37 37 619
Fax: (84 650) 37 37 620
1800 6547
THINK TOGETHER
Nhà phân phối thiết bị điện công nghiệp
hàng đầu Việt Nam
T
3. 2
42.5mm
35.9mm
28.4mm
28mm
2mm
Ø16 Command Switches
An integrated structure with
built-in contacts that can
reduce control panel depth.
A wide variety of sockets are
available to simplify wiring.
A structure that integrates operator and contacts to reduce panel-mounting depth. Terminals extending to the rear of the switch
ensure easy wiring work.
Switches combine with a variety of sockets to simplify wiring.
Applicable as a fast-connection
terminal switch by combining the
socket with a switch.
Easily wired by simply removing the
wire sheath and inserting the wires
while pressing the insertion slot button
(no soldering required).
Incorporates a branch terminal for easy
branching.
Applicable as a connector by
combining the socket with
receptacles.
The socket holds the receptacles,
making it easy to connect the
receptacle to the switch with a single
operation.
Applicable as a switch for PC board by
combining the socket with a switch.
Pattern wiring reduces the number of
wiring man-hour and helps prevent
faulty wiring.
Mounting panel
AR15C・
AR16C・
・
・
AH164, 5 series
(Contact
separated type)
Lock lever
Insertion
slot button
Receptacle
Lock lever
4. contact mechanism
Gold-plated contacts and a snap-
action mechanism enables IC-level
applications (with a switching current
of 1 mA at 5 V).
3
Bezel
(Standard)
Keep in mind that the panel cutout size
for the thin type depends on the operator
shape.
The key selector
switch incorporates
a pin tumbler type key
(reversible type) to
improve the insertion/
extraction performance of the key.
Washer Tightening nut
Six key types are available.
The pin tumbler construction improves security.
In addition to the standard type, a thin type
with a panel protrusion of only 2 mm is
available, allowing high-density mounting for
attractive panel designs.
・ ・
The AR16V types feature a panel depth dimension of 28 mm for non-illuminated
models and can have up to four sets of contacts.
With regard to the degree of protection, AR15C・AF15C series which met the
requirements of IP40 of IEC 60529, and AR16C・AF16C series which meet the
requirements of IP65 of the said, are available. This permits the application to
various fields, from machine tools to OA(Office Automation) facilities.
IP40 : AR15C・DR15C, AF15C・DF15C
IP65 : AR16C・DR16C, AF16C・DF16C
Standard models meet UL/CSA requirements, China Compulsory Certification (CCC)
standards, and TÜV EN standards, making them ideal for equipment for export.
Meets EU RoHS
Standard models meet RoHS
requirements
(EU Directive 2002/95/C).
Fast-Connection socket
Connector socket
Socket for PC board
AR15C・
・
AR16C・
・
AR16V0R AR16V0L
Non-illuminated Illuminated
28mm 31.5mm
5. 4
Overview .................................................................................................... 2
Safety precautions ..................................................................................... 7
Glossary .................................................................................................... 8
Selection guide........................................................................................... 9
Featurers, specifications .......................................................................... 13
Type number nomenclature...................................................................... 16
Type numbers and dimemsions
................... 20
Pushbutton switches ................................................................. 22
..................................................... 24
................................................... 26
..................................................... 29
................... 32
Pushbutton switches ................................................................. 34
..................................................... 36
................................................... 38
..................................................... 41
Panel cutting and mounting...................................................................... 44
Notes on use............................................................................................ 46
Accessories.............................................................................................. 52
Mass .................................................................................................. 56
AR16V
Rating and specifications ......................................................................... 57
Type numbers........................................................................................... 59
................................................................... 60
Notes on use............................................................................................ 61
7. 6
The information contained in this catalog does not constitute an express or implied warranty of quality, any warranty of
merchantability of fitness for a particular purpose is hereby disclaimed.
Since the user's product information, specific use application, and conditions of use are all outside of Fuji Electric FA
Components & Systems'control,
The products identified in this catalog shall be sold pursuant to the terms and conditions identified in the
"Conditions of Sale" issued by Fuji Electric FA with each order confirmation.
Except to the extent otherwise provided for in the Conditions of Sale issued by Fuji Electric FA, Fuji Electric FA
warrants that the Fuji Electric FA products identified in this catalog shall be free from significant defects in materials and
Electric FA at 5-7, Nihonbashi Odemma-cho, Chuo-ku, Tokyo, Japan. The sole and exclusive remedy with respected to
the above warranty whether such claim is based on warranty, contract, negligence, strict liability or any other theory,
is limited to the repair or replacement of such product or, at Fuji Electric FA's option reimbursement by Fuji Electric FA
of the purchase price paid to Fuji Electric FA for the particular product.
Except as provided in the Conditions of Sale,
no agent or representative of Fuji Electric FA is authorized to modify the terms of this warranty in writing or orally.
In no event shall Fuji Electric FA be liable for special, indirect or consequential damages, including but not limited to,
loss of use of the product, other equipment, plant and power system which is installed with the product, loss of profits or
revenues, cost of capital, or claims against the purchaser or user of the product by its customers resulting from the use of
information, recommendations and descriptions contained herein. The purchaser agrees to pass on to its customers and
users, in writing at the time inquiries and orders are received by buyer, Fuji Electric FA's warranty as set forth above.
9. 8
Classification
Rating
Operating
environment
Degree of protection
Types of pilot lights
and illuminated
switches
Operational functions
Term
Rated insulation voltage
(Ui)
Rated operational voltage
(Ue)
Rated impulse withstand
voltage (Uimp)
Conventional free air thermal
current (Ith)
Rated operational current
(Ie)
Pollution degree
IP code
Pilot lights without transformer
Illuminated switch without
transformer
Momentary
Alternate
Maintained
Spring return
Spring/manual return
Explanation
A voltage value that serves as a reference when designing a device and satisfies the
clearance and creepage distance and the withstand voltage (dielectric strength) of the
device.
A voltage value applied to a device under specified conditions.If the device is a control
switch, the rated operational voltage (Ue) in combination with the rated operational
current determines the equipment that it is to be applied to. Furthermore, the rated
operational voltage (Ue) determines the relevant tests and operating load type of the
control switch.If the control switch is an illuminated type, the term "lamp operational
voltage" is applied in this catalog in order to distinguish it from the rated operational
voltage of the switch.
This is the peak value of an impulse voltage that has a specified waveform and polarity
and that is capable of being withstood by a device under specified test conditions, and
serves as a reference for clearance.
The maximum value for an electric current used to test the temperature rise of a control
switch.
An electric current applied under specified conditions.
A factor used for determining the clearance and creepage distance of a device. There
are four pollution degrees according to the pollutants in the operating environment,
such as the dust in the air. Fuji’s Command Switches are applicable to pollution degree
3. Pollution degree 3 refers to the occurrence of conductive pollution or the occurrence
of conductivity as a result of condensation, but the occurrence of dry, nonconductive
pollution in normal, dry conditions. It applies to environments typical of manufacturing
plants.
The IP code stipulates the degree of protection of a device provided by its enclosure
against the ingress of solid matter and water according to IEC 60529. The IP code is
expressed with the code letters IP (Ingress Protection) followed by two digits. The first
characteristic digit indicates the degree of protection against the ingress of solid foreign
objects. The second characteristic digit indicates the degree of protection against the
ingress of water.
A pilot light or illuminated switch designed so that the voltage of the electric circuit can
be applied directly to the light source.
The contacts operate when the pushbutton is pressed and automatically reset when the
pushbutton is released.
The contacts operate when the pushbutton is pressed and the actuated state is held
(locked) when the pushbutton is released. The contacts are reset when the pushbutton
is pressed again.
The knob (key) of selector switch is operated and reset by hand. The contacts are
interlocked according to each knob (key) operation.
The knob (key) of the selector switch and the contacts are automatically reset to the
normal position if the knob (key) is released while the knob (key) is being actuated.
Manual and automatic knob (key) resetting methods combined and applied to
three-notch selector switches.
Pilot light Illuminated
switch
Ex.
ba b
NC
NOCOM
a
Note: The terms of a, b, COM, NC and NO indicate the terminal numbers
Command Switches
10. Command Switches
Illuminated pushbutton switches
Operator Flush rectangular Flush rectangular with guard
IP40 IP65 IP40 IP65
Operator action Momentary Alternate Momentary Alternate Momentary Alternate Momentary Alternate
Type
Appearance
S S
Operator Flush square Extended round
IP40 IP65 IP40 IP65
Operator action Momentary Alternate Momentary Alternate Momentary Alternate Momentary Alternate
Type
Appearance
S S
Pushbutton switches
Operator Flush rectangular Flush rectangular with guard
IP40 IP65 IP40 IP65
Operator action Momentary Alternate Momentary Alternate Momentary Alternate Momentary Alternate
Type
Appearance
S S
Operator Flush square Extended round
IP40 IP65 IP40 IP65
Operator action Momentary Alternate Momentary Alternate Momentary Alternate Momentary Alternate
Type AR15E5RC AR16E5RC
Appearance
S S
Pilot lights
Operator Flush rectangular Flush square
IP40 IP65 IP40 IP65
Type
Appearance
S S
Operator Extended round
IP40 IP65 IP40 IP65
Type
Appearance
S S
11. Command Switches
Operator Knob with rectangular bezel Knob with square bezel Knob with round bezel
No. of position 2-position, 3-position 2-position, 3-position 2-position, 3-position
Operator action Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
IP40 IP65 IP40 IP65 IP40 IP65
Type AR15PRC AR16PRC
Appearance
S S S
Operator Key with rectangular bezel Key with square bezel Key with round bezel
No. of position 2-position, 3-position 2-position, 3-position 2-position, 3-position
Operator action Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
IP40 IP65 IP40 IP65 IP40 IP65
Type
Appearance
S S S
Emergency stop illuminated pushbutton switches
Operator Illuminated push-lock Illuminated push-lock
Operator action Turn reset or pull reset Turn reset or pull reset
IP65 IP65
Type
Appearance
S S
Emergency stop pushbutton switches
Operator Push-lock Push-lock
Operator action Turn reset or pull reset Turn reset or pull reset
IP65 IP65
Type AR16V1R
Appearance
S S
12. 11
Illuminated pushbutton switches
Operator Flush rectangular Flush square
IP40 IP65 IP40 IP65
Operator action Momentary Alternate Momentary Alternate Momentary Alternate Momentary Alternate
Type
Appearance
S S
Operator Flush round
IP40 IP65
Operator action Momentary Alternate Momentary Alternate
Type
Appearance
S
Pushbutton switches
Operator Flush rectangular Flush square
IP40 IP65 IP40 IP65
Operator action Momentary Alternate Momentary Alternate Momentary Alternate Momentary Alternate
Type
Appearance
S S
Operator Flush round
IP40 IP65
Operator action Momentary Alternate Momentary Alternate
Type
Appearance
S
Pilot lights
Operator Flush rectangular Flush square
IP40 IP65 IP40 IP65
Type
Appearance
S S
Operator Flush round
IP40 IP65
Type
Appearance
S
Command Switches
13. 12
Operator Knob with rectangular bezel Knob with square bezel Knob with round bezel
No. of position 2-position, 3-position 2-position, 3-position 2-position, 3-position
Operator action Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
IP40 IP65 IP40 IP65 IP40 IP65
Type
Appearance
S S S
Operator Key with rectangular bezel Key with square bezel Key with round bezel
No. of position 2-position, 3-position 2-position, 3-position 2-position, 3-position
Operator action Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
Maintained,
Spring/manual return,
Spring return
IP40 IP65 IP40 IP65 IP40 IP65
Type
Appearance
S S S
Command Switches
14. 13
Command Switches
that reduces control panels’ depth. A unified depth of 28.4mm
for the Standard type and 35.9mm for the Thin type.
design. Select an optimum one to match your control panel
design.
mechanism with a snap-action structure that makes and
breaks 1mA at 5V.
type mechanism provides improved key insertion and
Contact rating code 120V 240V
Making current Making current
3.6A 0.6A 1.8A 0.3A
Type of switches Conventional free
air thermal current
Ith
Rated operational current Ie
Rated operational AC
AC-13 AC-12
Illuminated pushbutton switch
Pushbutton switch
Selector switch
5A 24V – – 0.7A *1
1A
120V 1A 1.5A – –
125V – – 0.15A *1
0.2A
240V 0.7A 1A – –
Note: *1
T0.95
15. 14
Command Switches
Item Illuminated pushbutton switch,
pushbutton switch
Selector switch Pilot lights
Mechanical Momentary action:
1 million operations
Alternate action:
250,000 operations
Maintained:
250,000 operations
Spring/manual return:
250,000 operations
Spring return:
250,000 operations
–
Electrical –
Operating frequency –
Withstand voltage 2000V AC, 1 minute
2000V AC, 1 minute –
Insulation resistance 100Mȍ
2.5kV
Conditional short-circuit current 1000A
Short-circuit protective device
Pollution degree 3
Vibration
Shock 2
2
Operational ambient temperature
Storage temperature –40 to +70°C
IP2X (Fast-connection socket: AR6S690, Connector socket: AR6S691-C or
Ietm Fast-connection socket Connector socket Socket for PC board
Conventional free air thermal current Ith 3A 5A 3A
2.5kV 0.5kV
2000V AC, 1minute 1000V AC, 1minute
Insulation resistance 100Mȍ
Operational ambient temperature
Storage temperature –40 to +70°C
Relative humidity
Pollution degree 3
depending on the operational ambient conditions and type of load.
16. 15
Command Switches
Applied method Lamp operational voltage
Type Lamp rated voltage Current consumption
without transformer
Note: A box
Illuminated pushbutton / pilot light color Luminous color of high-brightness
Type Type
Green G Green G
Red R Red R
White W White P
Yellow Y White P
Orange A Amber A
S
Note: *1
A box
Type of lamp Judgment criterion
Approx. 30000h When the brightness is less than 50% of initial value.
CSA C22.2 No.14
TÜV: EN60947-5-1 Pushbutton, Illuminated pushbutton: R50116757
Selector: R50116759
Pilot lights: R50116762
Pilot lights: 2013010305590652
ensuring easier direct or indirect export to North America and European countries with no safety standard concerns.
17. 16
Command Switches
C2 E3 GAR16 F0NC
Product category
Operator shape and action
Contact arrangement and terminal
Category
Standard type
Thin type
Color of button
Color
Green
Red
White *1
Yellow
Orange
Blue
LED color
Green
Red
White
White
Amber
Blue
Code
G
R
W
Y
A
S
Operator shape
Flush rectangular
Flush rectangular with guard
Flush square
Extended round
Flush round
Contact
arrangement
SPDT
2PDT
Code
C1
C2
Type of terminal
Tab (#110) and
solder dual-use terminal
Code
Standard type
Momentary
F0NC
G0NC
F0MC
E0LC
–
Alternate
F5NC
G5NC
F5MC
E5LC
–
Alternate
F5NC
–
F5MC
–
F5LC
Thin type
Momentary
F0NC
–
F0MC
–
F0LC
Degree of protection
IP40
IP65
IP40
IP65
Code
AR15
AR16
AF15
AF16
Note: The button is transparent in color.
*1: A combination of the transparent lens
and the white legend plate comes to
white.
Lamp operational voltage and light source
Applied method
Without
transformer
Voltage
12V DC
24V DC
Code
LED
B3
E3
AR16 F0TC C2 R
Product category
Operator shape and action
Contact arrangement and terminal
Color of button
Color
Green
Red
Black *1
White *2
Yellow
Orange
Blue
Code
G
R
B
W
Y
A
SOperator shape
Flush rectangular
Flush rectangular with guard
Flush square
Extended round
Flush round
Contact
arrangement
SPDT
2PDT
Code
C1
C2
Type of terminal
Tab (#110) and
solder dual-use terminal
Code
Standard type
Momentary
F0TC
G0TC
F0SC
E0RC
–
Alternate
F5TC
G5TC
F5SC
E5RC
–
Alternate
F5TC
–
F5SC
–
F5RC
Thin type
Momentary
F0TC
–
F0SC
–
F0RC
Notes: The button is transparent in color.
*1: A combination of the transparent button
and the black legend plate comes to
black.
*2: A combination of the transparent button
and the white legend plate comes to
white.
Category
Standard type
Thin type
Degree of protection
IP40
IP65
IP40
IP65
Code
AR15
AR16
AF15
AF16
Note: The manufacturing range varies depending on the
this catalog.
18. Command Switches
E3 WDR16 D0LC
Product category
Lens shape
Color of lens
Color
Green
Red
White *1
Yellow
Orange
Blue
LED color
Green
Red
White
White
Amber
Blue
Code
G
R
W
Y
A
S
Lens shape
Flush rectangular
Flush square
Extended round
Flush round
Dome
Code
Standard type
F0NC
F0MC
E0LC
–
D0LC
Thin type
F0NC
F0MC
–
F0LC
–
Note: The lens is transparent in color.
*1
: A combination of the transparent lens
and the white legend plate comes to
white (except for dome type).
Note: The terminal used is a tab (#110) and solder
dual-use terminal.
Lamp operational voltage and light source
Applied method
Without
transformer
Voltage
12V DC
24V DC
Code
LED
B3
E3
Category
Standard type
Thin type
Degree of protection
IP40
IP65
IP40
IP65
Code
DR15
DR16
DF15
DF16
Note: The manufacturing range varies depending on the
this catalog.
19. 18
Command Switches
2 C1 BAR16 PTC
Product category
Contact arrangement and terminal
Contact
arrangement
SPDT *1
2PDT
Code
C1
C2
Type of terminal
Tab (#110) and
solder dual-use terminal
Operator shape
Operator shape
Knob with rectangular bezel
Knob with square bezel
Knob with round bezel
Code
PTC
PSC
PRC
Color of knob
Color
Black
Code
B
Note: *1
2-position model only available
No. of positions and operator action
No. of
positions
2-position (90°)
3-position (45°)
Operator action
Maintained
Spring return
(Right to left)
Maintained
Spring/manual return
(Left to center)
Spring/manual return
(Right to center)
Spring return
(Left or right to center)
Code
2
0
3
6
7
1
Category
Standard type
Thin type
Degree of protection
IP40
IP65
IP40
IP65
Code
AR15
AR16
AF15
AF16
20. Command Switches
AR16 JTC 3 E C2 A
Product category
Contact arrangement and terminal
Contact
arrangement
SPDT *2
2PDT
Code
C1
C2
Type of terminal
Tab (#110) and
solder dual-use terminal
Operator shape
Operator shape
Key with rectangular bezel
Key with square bezel
Key with round bezel
Code
JTC
JSC
JRC
Types of key
Type *1
Code
A
A
B
B
C
C
D
D
E
E
F
F
Note: *2
2-position model only
Key removable position
Key removable
position
Left
Left and right
Left, center and right
Right
Center
Center and right
Left and center
Applicable operator action
2
–
–
–
–
0
–
–
–
–
–
–
3 6
–
–
–
–
7
–
–
–
–
1
–
–
–
–
–
–
Code
A
B
C
D
E
F
G
Note: *1
“A” is standard.
No. of positions and operator action
No. of
positions
2-position (90°)
3-position (45°)
Operator action
Maintained
Spring return
(Right to left)
Maintained
Spring/manual return
(Left to center)
Spring/manual return
(Right to center)
Spring return
(Left or right to center)
Code
2
0
3
6
7
1
Category
Standard type
Thin type
Degree of protection
IP40
IP65
IP40
IP65
Code
AR15
AR16
AF15
AF16
21. Command Switches
AR16 F0NC – C2 E3 G
Product category: Standard type
Operator shape and action
Color of button
Lamp operational voltage and
light source
Contact arrangement and terminal
Operator and Appearance Lamp
operational
voltage
Conntact
arrangement
Momentary action
Type
Alternate action
Type
IP40 IP65 IP40 IP65
Flush rectangular
Flush rectangular with guard
Flush square
Extended round
Note:See page 21 for the outline dimensions.
Replace the mark by the color code
Color Green Red White Yellow Orange
Code G R W *1
Y A S
Note: *1
A combination of the transparent button and the white legend plate
comes to white.
23. 22
Command Switches
AR16 F0TC – C2 G
Product category: Standard type
Operator shape and action
Color of button
Contact arrangement and terminal
Replace the mark by the color code
Color Green Red White Yellow Orange
Code G R 1
W *2
Y A S
Notes: *1
A combination of the transparent button and the black legend plate
comes to black.
*2
A combination of the transparent button and the white legend plate
comes to white.
Operator and Appearance Conntact
arrangement
Momentary action
Type
Alternate action
Type
IP40 IP65 IP40 IP65
Flush rectangular
Flush rectangular with guard
Flush square
Extended round
Note: See page 23 for the outline dimensions.
25. 24
Command Switches
DR16 D0LC – E3 W
Product category: Standard type
Lens shape
Color of lens
Lamp operational voltage and
light source
Lens and Appearance Type
IP40 IP65
Flush rectangular
Flush square
Extended round
Note: See page 25 for the outline dimensions.
Replace the mark by the color code
Color Green Red White Yellow Orange
Code G R W *1
Y A S
Note: *1
A combination of the transparent lens and the white legend plate
27. 26
Command Switches
AR16 PTC – 2 C2 B
Product category: Standard type
Operator shape
Color of knob: Black
Contact arrangement and terminal
No. of positions and operator action
2-position
Operator and appearance Contact
arrangement
Type Contact operation
1 2
Maintained/90°
1 2
Spring return/90°
Contact unit *1
Operator
position *2
1 2
IP40 IP65 IP40 IP65
Knob with rectangular bezel
Left COM
NC
NO
Knob with square bezel
Left COM
NC
NO
Knob with round bezel
Right COM
NC
NO
Note: *1
*2
28. Command Switches
3-position
Operator and appearance Contact
arrangement
Type Contact operation
Maintained/each 45° Spring return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
Knob with rectangular bezel
Knob with square bezel
Knob with round bezel
Left COM
NC
NO
Right COM
NC
NO
Spring/manual return/each 45° Spring/manual return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
,
29. 28
Command Switches
Knob with square bezel
AR15PSC and AR16PSC
Knob with round bezel
AR15PRC and AR16PRC
Knob with rectangular bezel
AR15PTC and AR16PTC
24
18
20.528.4
7.5
9.5
20.528.4
7.5
9.5
20.528.4
7.5
9.5
18sq.
18sq.
2.8
10
2.8
10
2.8
10
7
7
7
0.5
5.8
0.5
5.8
0.5
5.8
Panel thickness 1 to 6
Nut Washer
Nut Washer
Nut Washer
Packing
(AR16 only)
Packing
(AR16 only)
Packing
(AR16 only)
Panel thickness 1 to 6
Panel thickness 1 to 6
17
18
1717
30. Command Switches
AR16 JTC – 2 B C2 A
Product category: Standard type
Operator shape
No. of positions and operator action
Type of key
Contact arrangement and terminal
Key removable position
2-position
Operator and appearance Contact
arrangement
Type Contact operation
1 2
Maintained/90°
1 2
Spring return/90°
Contact unit *1
Operator
position *2
1 2
IP40 IP65 IP40 IP65
Key with rectangular bezel
Key with square bezel
Key with round bezel
C1A
C1A
C1A
C1A
C1A
C1A
Left COM
NC
NO
C2A
C2A
C2A
C2A
C2A
C2A
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
:
Specify the key removal position in the square mark.
Key removable position
Applied operator action Code
2 0
Left A
–
Left –
: Available –: Not available
Type *1
A C E F
Code A C E
*1
"A" is standard.
31. Command Switches
3-position
Operator and appearance Contact
arrangement
Type Contact operation
Maintained/each 45° Spring return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
Key with rectangular bezel
Key with square bezel
Key with round bezel
C2A
C2A
C2A
C2A
C2A
C2A
Left COM
NC
NO
Right COM
NC
NO
Spring/manual return/each 45° Spring/manual return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
,
Specify the key removal position in the square mark.
Key removable position
Applied operator action Code
3 6 7 1
Left – – A
– – –
– – – C
Right – –
Center E
– –
– – G
: Available –: Not available
Type *1
A C E F
Code A C E
*1
"A" is standard.
32. 31
Command Switches
Key with square bezel
AR15JSC and AR16JSC
Key with round bezel
AR15JRC and AR16JRC
7.5
10
9.5
2828.4
2828.4
2828.4
24
18
18sq.
18sq.
Key with rectangular bezel
AR15JTC and AR16JTC
Panel thickness 1 to 6
Nut
Washer
7.5
10
9.5
Nut
Washer
7.5
10
9.5
Nut
Washer
2.8
10
7
2.8
10
2.8
10
7
7
0.5
5.8
0.5
5.8
0.5
5.8
22
2
Packing
(AR16 only)
Packing
(AR16 only)
Packing
(AR16 only)
Panel thickness 1 to 6
Panel thickness 1 to 6
18
33. 32
Command Switches
AF16 F0NC – C2 E3 G
Prodect category: Thin type
Operator shape and action
Color of button
Lamp operational voltage and
light source
Contact arrangement and terminal
Operator and
Appearance operational
voltage
Conntact
arrangement
Momentary action
Type
Alternate action
Type
IP40 IP65 IP40 IP65
Flush rectangular
Flush square
Flush round
Replace the mark by the color code.
Color Green Red White Yellow Orange
Code G R W *1
Y A S
Note: *1
A combination of the translucent button and the white legend plate
comes to white lens.
35. 34
Command Switches
AF16 F0TC – C2 G
Prodect category: Thin type
Operator shape and action
Color of button
Contact arrangement and terminal
Operator and Appearance Contact
arrangement
Momentary action
Type
Alternate action
Type
IP40 IP65 IP40 IP65
Flush rectangular
Flush square
Flush round
Replace the mark by the color code.
Color Green Red White Yellow Orange
Code G 1
R W *2
Y A S
Notes: *1
A combination of the translucent button and the black legend plate
comes to black.
*2
A combination of the translucent button and the white legend plate
comes to white.
37. 36
Command Switches
DF16 F0NC – E3 W
Product category: Thin type
Lens shape
Color of lens
Lamp operational voltage and
light source
Lens and Appearance Type
IP40 IP65
Flush rectangular
Flush square
Flush round
Replace the mark by the color code
Color Green Red White Yellow Orange
Code G R W *1
Y A S
Note: *1
A combination of the transparent lens and the white legend plate
comes to white.
39. 38
Command Switches
AF16 PTC – 2 C2 B
Product category: Thin type
Operator shape
Color of knob: Black
Contact arrangement and terminal
No. of positions and operator action
2-position
Operator Conntact
arrangement
Type Contact operation
1 2
Maintained/90°
1 2
Spring return/90°
Contact unit *1
Operator
position *2
1 2
IP40 IP65 IP40 IP65
Knob with rectangular bezel
Knob with square bezel
Knob with round bezel
Left COM
NC
NO
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
: Contact closed.
40. Command Switches
3-position
Operator Contact
arrangement
Type Contact operation
Maintained/each 45° Spring return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
Knob with square bezel
Knob with round bezel
Left COM
NC
NO
Right COM
NC
NO
Spring/manual return/each 45° Spring/manual return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
, : Contact closed.
41. Command Switches
Knob with square bezel
AF15PSC and AF16PSC
Knob
AF15PRC and AF16PRC
Panel thickness: 1 to 6
Panel thickness: 1 to 6
Panel thickness: 1 to 6
28
22
171717
2
1335.9
2
1335.9
2
1335.9
22
22sq.
Knob with rectangular bezel
AF15PTC and AF16PTC
Nut
Panel retainer
Nut
Panel retainer
Nut
Panel retainer
7
7
2.8
10
2.8
10
7
2.8
10
0.5
5.8
0.5
5.8
0.5
5.8
Packing
(AF16 only)
Packing
(AF16 only)
Packing
(AF16 only)
42. 41
Command Switches
AF16 JTC – 2 B C2 A
Product category: Standard type
Operator shape
No. of positions and operator action
Type of key
Contact arrangement and terminal
Key removable position
2-position
Operator Contact
arrangement
Type Contact operation
1 2
Maintained/90°
1 2
Spring return/90°
Contact unit *1
Operator
position *2
1 2
IP40 IP65 IP40 IP65
Key with rectangular bezel
Key with square bezel
Key with round bezel
C1A
C1A
C1A
C1A
C1A
C1A
Left COM
NC
NO
C2A
C2A
C2A
C2A
C2A
C2A
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
: Contact closed.
Replace the mark by the removable positiom code.
Removable position
Applied operatior position Code
2 0
Left A
–
Left – C
: Available –: Not available
Type *1
A C E F
Code A C E
*1
"A" is standard.
43. 42
Command Switches
3-position
Operator Contact
arrangement
Type Contact operation
Maintained/each 45° Spring return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
Key with
Flush square
Key with
square bezel
Key with
round bezel
C2A
C2A
C2A
C2A
C2A
C2A
Left COM
NC
NO
Right COM
NC
NO
Spring/manual return/each 45° Spring/manual return/each 45°
Contact unit *1
Operator
position *2
1 2 3
IP40 IP65 IP40 IP65
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
C2A
Left COM
NC
NO
Right COM
NC
NO
Notes: *1
*2
, : Contact closed.
Replace the mark by the removable positiom code.
Removable position
Applied operatior position Code
3 6 7 1
Left – – A
– – –
– – – C
Right – –
Center E
– –
– – G
: Available –: Not available
Type *1
A C E F
Code A C E
*1
"A" is standard.
44. 43
Command Switches
Key with square bezel
AF15JSC and AF16JSC
Key with round bezel
AF15JRC and AF16JRC
Key with recrangular bezel
AF15JTC and AF16JTC
20.5
2
2.5
35.9
20.535.9
20.535.9
28
22
22sq.
22
Panel thickness: 1 to 6
Nut
Panel retainer
7
7
7
2.8
10
2.8
10
2.8
10
222
5.8
0.5
5.8
0.5
5.8
0.5
Packing
(AF16 only)
Packing
(AF16 only)
Packing
(AF16 only)
Panel thickness: 1 to 6
Nut
Panel retainer
Panel thickness: 1 to 6
Nut
Panel retainer
2
2.5
2
2.5
45. 44
Read the Operating Instructions carefully before mounting,
wiring, operating, servicing, or inspecting the command switch.
Make sure that the Operating Instructions is delivered to the
final user of the command switch.
and Caution, with meanings described as follows:
: If operation is incorrect, a dangerous situation
may occur, resulting in death or serious injuries.
: If operation is incorrect, a dangerous situation
may occur, resulting in minor to medium injuries
or physical damage to equipment.
accident, depending on the situation.
electric shock or burning may result.
or inspecting the product. An electric shock, burning from short-
circuiting or equipment malfunction may result.
Instructions. Make sure that the size of the wires is suitable for the
voltage and applied current. The wrong wiring may result in fire,
accidents or malfunctions.
(The panel cutout dimension varies depending on
Note: When changing the
operating angle position
of the selector switch, the
panel cutout also requires
an angle change.
18.1
+0.2
0
19.2
+0.2
0
24.2
+0.2
-0.1
19.2
+0.2
sq.-0.1
-0.1
19.2
+0.2
-0.1
19.2
+0.2
Note: When changing the
operating angle position
of the selector switch, the
panel cutout also requires
an angle change.
into the mounting hole from the front of the panel, attach the
washer and tightening nut from the back of the panel, and
Note: *1
Do not use pliers or other improper tools to tighten the nut, or tighten it
excessively, Otherwise, the nut may be damaged or the switch may
malfunction.
*2
Packing *2
Panel
Washer
Tightening nut *1
Tightening wrench
(AHX601)
As shown in the figure below, insert the switch main unit into
the mounting hole from the front of the panel, attach the panel
retainer from the back of the panel, and securely tighten the
Switch main unit
Packing *2
Panel
Panel retainer
Tightening nut *1
Tightening wrench
(AHX601)
Note: *1
Do not use pliers or other improper tools to tighten the nut, or tighten it
excessively, Otherwise, the nut may be damaged or the switch may
malfunction.
*2
Tables 1 and 2 show applicable panel thickness.
Mounting condition Applicable panel
thickness, mm
Without accessories 1 to 6
With
accessories
Protective cover 1 to 4
1 to 4
Various sockets 1 to 3.2
Terminal cover 1 to 3.2
Protective cover + various sockets 1 to 1.6
Protective cover + Terminal cover 1 to 1.6
Cannot be used.
Cannot be used.
When requiring rotation prevention or positional stabilization
When requiring rotation prevention or positional stabilization
Command Switches
46. 45
Command Switches
Illuminated pushbuttons, pushbuttons, selectors, and pilot lights
Mounting condition Applicable panel
thickness, mm
Without accessories 1 to 6
With
accessories
Protective cover 1 to 4
Various sockets 1 to 3.2
Terminal cover 1 to 3.2
Protective cover + various sockets 1 to 3.2
Protective cover + Terminal cover 1 to 3.2
① ② ③
① ② ③
Illuminated pushbuttons, pushbuttons, selectors, and pilot lights
as those without accessories.
workability into consideration.
47. 46
Command Switches
Read the Operating Instructions carefully before mounting,
wiring, operating, servicing, or inspecting the command switch.
Make sure that the Operating Instructions is delivered to the
final user of the command switch.
and Caution, with meanings described as follows:
: If operation is incorrect, a dangerous situation
may occur, resulting in death or serious injuries.
: If operation is incorrect, a dangerous situation
may occur, resulting in minor to medium injuries
or physical damage to equipment.
accident, depending on the situation.
electric shock or burning may result.
or inspecting the product. An electric shock, burning from short-
circuiting, or equipment malfunction may result.
Instructions. Make sure that the size of the wires is suitable for the
voltage and applied current. The wrong wiring may result in fire,
accidents, or malfunctions.
to the grooves in the color lens and pull out the lens, or pry the
lens lightly with a small slotted screwdriver.
To remove the color lens, pry the lens lightly with a small
slotted screwdriver.
If one side of the color lens is separated from the screen,
further insert the screwdriver and remove the color lens
this.
To fit the color lens, align the protrusion of switch main body
with the groove of the screen, and press-fit them.
Screen groove
Protrusion of main unit
Packing *1
Note: *1
Insert the tip of a small slotted screwdriver into the groove and
press down the screwdriver in the direction of the arrow.
48. Command Switches
Place the textured surface of the diffusion plate on the screen,
place the textured surface of the legend plate on the diffusion
plate, and then press the color lens together.
Color lens mating groove
Textured surface (back side)
Textured surface (back side)
Legend plate
Screen
Diffusion plate *1
*1
The diffusion plate is not fused to the screen
Set the textured surface side of the legend plate with the
screen side, then press-fit the color lens. When press-fitting,
inside the screen.
( )
( )
Set the textured surface side of the legend plate with the
screen side, align the screen protrusion with the color lens
groove, and press-fit together. When press-fitting, make sure
screen.
( )
( )
Align the protrusion of the legend plate with the groove of the
screen, also align the screen protrusion and color lens groove,
and press-fit together. When press-fitting, make sure that your
( )
( )
switches and pushbutton switches, do not remove the color
mechanisms may be damaged.
Engrave the surface of the legend plate.
such as melamine paint, phthalic acid paint, or acrylic
paint.
Shape Size, mm
Rectangular
Square
Round
Notes:*1
A legend sheet may be used, provided that the external dimensions do
not exceed the corresponding outer size specified in the above table
and that the thickness is 0.1 mm or below. (No legend sheets are
*2
easy to change the operating angle position in 45° increments
The following figures show a knob type example. The key type
is the same.
Bezel
Bezel
Packing *1
Bezel protrusion
Bezel groove
1
1
2
290˚
(Standard)
90˚
Separate the bezel
from the knob.
The desired position can be set in
45° intervals.
Set the knob to the desired position,
align the groove of the knob,
and press-fit the knob.
Note: *1
The packing is not enclosed with AR15 series Switches.
49. 48
Command Switches
insert the lamp.
and surges when handling the product. The following anti-
electrostatic measure is recommended.
lamps.
you use the receptacles, use the following.
J.S.T Mfg. Co., Ltd : STO-01T-110N
is free of tension during soldering. Also, do not deform the
terminal.
large soldering tip or high heat generation.
One stranded wire with a maximum area of 0.75 mm2
Flat-type connection terminal
(2.8 2
(2.8 2
When using NO and NC contacts in the same contact block,
avoid connection that involves opposite polarity or wiring from
different types of power supply.
assure isolation. For solder terminals, caution is required if
thick wires, in particular, are connected or a large quantity of
solder is used.
Model Terminal arrangement
(view from the terminal
Illuminated
pushbuttons
2 2
4 4
1 1
a
(+)
b
(-)
Pushbuttons
and selector
switches
Pilot lights
a
(+)
b
(-)
Main unit
TOP( ) mark of switch
Protrusion side
LED lamp (DR6L695C)
Electrode side
Lamp changer (AHX672)
Part A: For LED lamps
50. 49
Command Switches
AR15C • DR15C, AF15C • DF15C
AR16C • DR16C, AF16C • DF16C
Notes on use
Selector Switches
• Knob type
The knob can be operated by turning it lightly. Be careful to
operate the knob with a torque not exceeding 1N•m.
• Key type
• Types of keys
Five types (B, C, D, E, and F) are available in addition to the
standard type (type A).
Make sure that the symbol on the key coincides with the
symbol on the switch.
Symbol on key Symbol on main body
• Fully insert the key into the switch and turn the key. Do not
pull on the key while turning it.
• Operate the key with a torque not exceeding 0.1N•m.
• Do not forcibly insert or extract the key.
• Do not attempt to operate the switch with the key insufficiently
inserted or insert the wrong key. Otherwise, a malfunction
may result.
LED Lamps
• LED lamp malfunctioning (incorrect lighting)
A minute current turns on the LED lamp. A leakage current
from the surge absorption circuit or noncontact circuit, or
stray capacitance between cables, may also turn on the LED
lamp.
In this case, a countermeasure (e.g., attaching a resistor in
parallel with the LED lamp) is required.
• Countermeasure against malfunctioning
Malfunctioning can be prevented by connecting a shunt resistor (R)
in parallel. The resistance in that case varies with the model and
operating conditions.
In the case of 24V DC
R: 10k (0.5W)
Shunt resistor
R
a b
(+) (-)
• The permissible fluctuation range for the operating voltage
of the 12V or 24V model is ±10%. If the operating voltage
is always 10% higher, select a resistor that will make the
operating current the same as or lower than the rated current,
and connect the resistor in series to the LED lamp.
• Calculation of external resistance
Example: Connecting a 24V red LED to a 48V circuit
External resistance [Ω] =
Circuit voltage [V] - Rated voltage [V]
Rated current [A]
=
48-24
=2200 [Ω]
11×10-3
Therefore, use an external resistor of 2.2kΩ 1W.
(Select a resistor with sufficient wattage.)
• Surges
LED products use elements that are sensitive to static
electricity. Keep in mind that an unusual voltage, such as a
surge voltage, may cause the product to malfunction.
Fast-connection socket
• Connectable wires
• Stranded wire : 0.3 to 0.75 mm2
(AWG22 to AWG18)
• Single wire : 0.5 to 1 mm dia.
••Recommended ferrule : Phoenix Contact, part number AI0, 34-8TQ
Wire size : 0.34 mm2
(22 AWG)
Crimping tool : CRIMPFOX UD6-6
Note :•Use a crimping tool with a hexagonal or round
cross section.
Sheath external diameter: 2.8 mm dia. Max.
• Wire sheath stripping length
11±1mm
Note : If ferrules are used, securely insert the wire sheath
inside a resin shell. Cut the end of the wire the same
length as the ferrule or cut it at a position approximately
0.5 mm longer.
Check the length using the strip gauge on the surface of the
socket displayed on the model nameplate. If standed wire is
used, twist the wire so that there are no loose strands after
stripping.
• Connection method
(1)•Insert the wire while pressing the button on the insertion
slot with a small flat-head screwdriver (tip width of 2 mm
max.). Release the button when the wire is all the way
seated in the switch.
(2)•When disconnecting the wire, pull out the wire while
pressing the button on the insertion slot with a small flat-
head screwdriver. Cut the bare part of the wire if it was
previously used, and then newly remove the sheath to
reuse the wire.
(3)•Insert a single wire for each insertion slot.
(4)•Do not pull on the wires with excessive force (15 N or more)
when you perform wiring. Make sure that not extemal force
is exerted on the wires after wiring has been completed.
The next time that a wire is inserted, the parts that support
the wire may change shape and result in conduction failure.
• Terminal arrangement (Rear-side View)
a b
NC
NO
COM
Top of switch ( mark)
NC
NO
NC
NO
a
Top mark on nameplate
b (for branching)
Button
COM
(for branching) COM (for branching)
51. Command Switches
Stranded wire: 0.5 to 0.75 mm2
terminal into the socket after connecting the wires to the
receptacle terminal. (The wires once connected cannot
receptacle terminal is securely connected to the socket.
▲ mark of the socket and the TOP (
switch, and put the socket and switch together.
Obtain the mounting pitch based on a reference line to
minimize the cumulative error.
Make sure that the centering difference between the switch
stabilize the operator position of the switch when combined
with the socket.
free of any bends.
socket mounting side.
diameter through hole of the PC board. Set the lever to the
lock position as viewed from the socket mounting side.
PC board, and solder the socket terminal.
that the socket terminal does not fall off, and turn over the
the PC board and socket.
soldering side is in the lock position, and solder the terminal.
16.2
15 +0.2
0
+0.2
0
18.1+0.2
0
Standard type (common) Thin type (round type)
19.2
+0.2
0
4
2
4
b a
2
4
1 1
Left-side
contact
(-) (+)
Note: The right-side contact is connected
in the case of an SPDT contact.
Right-side
contact
PC board
Lever
(Free position)
Lever
(Lock position)
52. 51
Command Switches
When continuously lighting pilot lights or pressing illuminated
pushbuttons, keep in mind that the ambient temperature may
exceed the rated value due to the heat radiated by the lamp.
is not made of metal or if the mounting panel is an enclosed
type.
ambient temperature and humidity ranges.
coolant oils, do not use the unit in places where special oils
and the frame, the switch may fail to operate normally. Take
appropriate measures, such as using a dust-proof protective
cover, if the switch is to be used in places that are subject to
dusts or filings.
sure that the product is not exposed to direct sunlight.
adverse effects of ozone or corrosive gases.
soldering iron with a large tip or that provides a high heat
generation.
Make sure that the distance shown in the figure below is
maintained between the panel and the PC board. The spacer
dimensions vary with the thickness of the mounting panel.
Type
Standard type 30.2±0.2
Thin type 37.7±0.2
Push down the socket levers all the way viewed from the
soldering side in the direction of the free position and
remove the PC board sockets. After removal, the socket
levers will return to the lock position automatically.
Check that the socket lever as viewed from the soldering
side is in the lock position, lightly insert the terminal and
socket so their position is aligned with the switch on the
panel, press the socket-mounting portion of the PC board,
and securely insert the entire socket until the socket lever
snaps. (Check that the lever as viewed from the soldering
board made of copper-plated laminated epoxy resin on a
woven glass fabric base.
allowed to attach the protective cover to some models and
that the adopted models cannot be mounted to some models
afterward.
53. 52
Command Switches
Type
Protective cover Type
AR15F0NC, F5NC, F0TC, F5TC
AR16F0NC, F5NC, F0TC, F5TCAXH826 *
AR15F0MC, F5MC, F0SC, F5SC
AR15E0LC, E5LC, E0RC, E5RC
AR16F0MC, F5MC, F0SC, F5SC
AR16E0LC, E5LC, E0RC, E5RC
* This cover returns to the home position with spring action to
type models.
Protective cover Type
AF15F0NC, F0TC
AF16F0NC, F0TC
AF15F0MC, F0SC
AF16F0MC, F0SC
This cover prevents accidental operation.
structure.
Color Green Red Transparent * Yellow Orange
Code G R C A
Color code of
main unit
G R Y A S
* When the color code of the main unit is W, a combination of the
transparent lens and the white legend plate comes to white.
and the black legend plate comes to black.
-
tion with spring action.
-
Type
AHX668 AR16F0NC, F5NC, F0TC, F5TC
AHX822 AR16F0MC, F5MC, F0SC, F5SC
AR16E0LC, E5LC, E0RC, E5RC
This cover seals the operator section to prevent powder or dust from
Terminal cover Type
Illuminated pushbutton switch, pushbutton
switch, selector switch, pilot light
Protective cover for insulation between terminals and live parts.
Standard type Thin type
-
plicable wires.
25.6
18
3.7
3
Enlarged view of Insert hole
4
4
54. 53
Command Switches
Type
Fast-connection socket Type
Pilot light
type switch.
Standard type Thin type
Socket for connector Type
Illuminated pushbutton switch, pushbutton
switch, selector switch, pilot light
connector.
Please prepare the receptacle terminal Model No.
Standard type Thin type
Socket for PC board Type
Illuminated pushbutton switch, pushbutton
switch, selector switch, pilot light
board, connection type switch.
Standard type Thin type
4739.5
22.5
24.5
2
18 18
55. 54
Command Switches
Type
Wrench Type
When installing a Command Switch on a panel, this tool enables
secure and firm tightening.
Remover Type
AHX618 Illuminated pushbutton switch, pushbutton
switch, pilot light
This tool is used for removing color lens, buttons or screens.
Lamp remover Type
Illuminated pushbutton switch, pilot light
This tool is used for installing or removing lamps.
Panel plug Type
Rectangular type
Square type
Round type
*1
Rectangular type
*1
Packing and nut are provided. The color is black only.
.
Type Gray
Code
Panel plug Type
Rectangular type
Square type
Round type
*1
Rectangular type
*1
Square type
*1
Round type
*1
Packing, panel retainer, and nut are provided.
Part A
φ
φ
56. 55
Command Switches
Type
Color lens and button Type
AR15F0NC, F5NC, F0TC, F5TC, G0NC, G5NC, G0TC, G5TC
AR16F0NC, F5NC, F0TC, F5TC, G0NC, G5NC, G0TC, G5TC
AF15F0NC, F5NC, F0TC, F5TC
AF16F0NC, F5NC, F0TC, F5TC
Note: Enter the color code in the square box .
Color Green Red Transparent*
Yellow Orange
Code G R C A
Color code of main unit G R Y A S
*
When the color code of the main unit is W, a combination of the transparent lens and the
code is W.
AR6C633
AR6C632
AR6C631
Legend plate Type
AR15F0NC, F5NC, F0TC, F5TC, G0NC, G5NC, G0TC, G5TC
AR16F0NC, F5NC, F0TC, F5TC, G0NC, G5NC, G0TC, G5TC
AF15F0NC, F5NC, F0TC, F5TC
AF16F0NC, F5NC, F0TC, F5TC
Note: Enter the color code in the square box .
Type White
Code
Color code of main unit G, R, W, Y, A, S
white legend plate comes to white.
AR6P667
AR6P666
AR6P665
Type Lamp operational voltage, current consumption
Note: Enter the color code in the square box .
Color Green Red White Amber
Code G R P A
Color code of main unit G R W Y A S
Key Type
AR15JTC/JSC/JRC
AR16JTC/JSC/JRC
AF15JTC/JSC/JRC
AF16JTC/JSC/JRC
Note: Enter the color code in the square box .
A C E
Two pieces per set on delivery.
6
10.5
58. 57
Command Switches
AR16V
Rating and specifications
Specifications (indoor use)
Item AR16V
Rated insulation voltage Ui 250V AC/DC
Durability Mechanical 100,000 operations
Electrical 100,000 operations (AC-15, AC-13, AC-12, DC-13, DC-12)
Operating frequency 1200 operations / hour (On-load factor : 40%)
Withstand voltage Between live section and grounding 2000V AC, 1 minute
Between opposite polarity live sections 2000V AC, 1 minute
Insulation resistance 100MΩ or more (500V DC megger)
Rated impulse withstand voltage Uimp 2.5kV
Conditional short-circuit current 1000A
Short-circuit protective device gG 6A (IEC60269 Fuse)
Pollution degree 3
Vibration Operating extremes : frequency 10 to 500 Hz, double amplitude 0.7mm
acceleration 50m/s2
Damage limits : frequency 10 to 500 Hz, double amplitude 0.7mm
acceleration 50m/s2
Shock Malfunction durability : 100m/s2
Mchanical durability : 500m/s2
Operational ambient temperature -10 to +55°C (no icing or no condensation)
Storage temperature -40 to +70°C
Relative humidity (inside control panel) 45 to 85%RH (-5 to 40°C) (no icing or no condensation)
Degree of protection of operating (displaying) section IP65 (dust-ploof, water jet proof): IEC 60529
Degree of protection of control section IP2X (Terminal cover : AR6Y262, At the connection)
Terminal style Solder terminal
Connectable wire Stranded wire: 0.75mm2
maximun (18AWG maximun)
Solid wire: 1.0mm diameter maximum
• Both pull or turn reset methods are supported.
• Two button diameters are available: 32 mm (AR16V0) and 40 mm
(AR16V1).
• Safety trigger-action mechanism that prevents the contacts from
operating until the switch is locked, even if people or objects
accidentally come into contact with the switch.
• Direct opening mechanism for NC contacts to ensure that the
contacts can be opened even in the unlikely event that they
become fused.
• IP65 protection for operating section.
28mm
AR16V0R
AR16V1L
Features
• Up to four sets of contacts in a one-piece structure with a panel
depth dimension of 28 mm (non-illuminated type).
Non illuminated type Illuminated type
31.5mm
• RoHS compliance (EU Directive 2002/95/EC) is a standard feature.
• Compliance with UL/CSA standards, China Compulsory Certification
(CCC) standards, and TÜV (EN standards).
• CE marking.
Integrated Contacts Structure Emergency stop pushbutton switches AR16V
59. 58
Command Switches
AR16V
Conventional free air
thermal current
I th
Rated operational current
Rated operational
voltage
AC
AC-12 AC-13 AC-15
5A 24V - - - 1.0A 0.7A
120V 1.5A 1.0A 0.3A - -
125V - - - 0.2A 0.15A
240V 1.0A 0.7A 0.3A - -
Contact rating code 120V 240V
Making current Making current
C300 15A 1.5A 7.5A 0.75A
0.95
Contact rating code Making current
125V 250V
R300 0.22A 0.11A
deperding on the operational ambient conditions and type of load.
Operation Push-lock, turn-reset or pull-reset
Ave. required operating force 25N
Operating travel Approx. 5.4mm
Operation angle Approx. 45°
20N
0.3N m
UL508
CSA C22.2 No.14
TÜV : EN60947-5-1, EN60947-5-5 R50136611
2003010305071068
Applied method Type of lamp Luminous color Lamp rated voltage Current consumption
Without transformer Red
60. Command Switches
AR16V
Operator Contact Type
Unibody push-lock, pull or turn-reset (32mm dia.) 1NC AR16V0R-01R
1NO+1NC AR16V0R-11R
2NC AR16V0R-02R
1NO+2NC AR16V0R-12R
3NC AR16V0R-03R
1NO+3NC AR16V0R-13R
4NC AR16V0R-04R
Unibody push-lock, pull or turn-reset (40mm dia.) 1NC AR16V1R-01R
1NO+1NC AR16V1R-11R
2NC AR16V1R-02R
1NO+2NC AR16V1R-12R
3NC AR16V1R-03R
1NO+3NC AR16V1R-13R
4NC AR16V1R-04R
Operator Contact
Unibody push-lock, pull or turn-reset (32mm dia.) 1NC AR16V0L-01 R
1NO+1NC AR16V0L-11 R
2NC AR16V0L-02 R
1NO+2NC AR16V0L-12 R
3NC AR16V0L-03 R
1NO+3NC AR16V0L-13 R
(KKD12-066) 4NC AR16V0L-04 R
Unibody push-lock, pull or turn-reset (40mm dia.) 1NC AR16V1L-01 R
1NO+1NC AR16V1L-11 R
2NC AR16V1L-02 R
1NO+2NC AR16V1L-12 R
3NC AR16V1L-03 R
1NO+3NC AR16V1L-13 R
(KKD12-070) 4NC AR16V1L-04 R
mark by the lamp voltage code
Lamp voltage Code
A3
E3
(KKD12-068)
(KKD12-071)
61. Command Switches
AR16V
Description Type
Wrench
When installing a command switch on a panel, this tool is useful
for tightening the switch firmly and efficiently.
(KKD07-257)
Terminal cover
Protective cover for insulation between terminals and live parts.
switch.
Legend plate for AR16V
emergency stop Legend Letter hight
00 -
EMERGENCY STOP 5A 7mm
ø4020.620.628 ø32
Dimensions, mm
4
0.5
3.8
2.2
ø4020.6
0.5
3.8
2.2
0.8
20.628
4
ø32
4
2
34
2
2
¡
7KLFNQHVV PP
¡
¡
36
62. 61
Command Switches
AR16V
Read the Operating Instructions carefully before mounting, wiring,
operating, servicing, or inspecting the command switch. Make sure
that the Operating Instructions is delivered to the final user of the
command switch.
and
, with meanings described follows.
: Indicates a potentially hazardous situation, which, if
not avoided, could resuit in death or serious injury.
: Indicates a potentially hazardous situation, which, if
not avoided, may result in minor or moderate injury
and/or damage to the equipment.
An item described under may resuit in a serious accident,
depending on the situation.
WARNING
electric shock or burning may result.
or inspecting, the product.
An electric shock, burning from short-circuiting, or equipment
malfunction may result.
CAUTION
Instructions. Make sure that the size of the wires is suitable for the
voltage and applied current.
The wrong wiring may result in fire, accidents, or malfunctions.
As shown in the figure below, insert the switch main unit into the
panel cutout from the front of the panel with the top of the switch main
tightening nut from the rear of the panel.
Note : The proper tightening torque is 0.6 to 1.0 N m.
The applicable panel thickness is 1 to 6 mm. When the terminal cover
to 3.2 mm.
The following minimum mounting pitch applies to high-density
mounting.
The wiring to this switch must be soldered. Keep the following items
in mind when soldering.
tension during soldering. Also, do not deform the terminal.
Lead-free solder has a high melting point, but the specific melting
point depends on the type of lead-free solder. This may cause
soldering iron with a large soldering tip or a large heating capacity is
used. Keep in mind that overheating the solder may resuit in product
malfunctioning.
Connectable wires
One Solid wires with a maximum diameter of 1.0mm
One standed wire with a maximum area of 0.75 mm2
prevent short-circuit, or an insulation tube to assure isolation. Care is
necessary when two wires are connected together or a large quantily
of solder is applied. In addition, keep in mind that overheating the
tube may result in product malfunctioning if a heat-shrinking tube is
used.
WARNING
CAUTION
it excessively, or the nut may be damaged or switch may malfunction.
Protrusion
Packing
Inverted triangular ( )
Switch main unit
Packing Panel
Washer
Tightening nut *1
Tightening wrench
r max=0.8mm
1.7+0.2
mm
φ16.2+0.2
mm0
0
17.9+0.2
mm0
A
A
Note : Detemine the mounting pitch by taking the operability and wiring
workability into consideration.
Type
AR16V0
AR16V1
With AR6P719
Dimension A
41mm min.
45mm min.
65mm min.
63. 62
Command Switches
AR16V
Model Terminal arrangement
Emergency stop pushbutton
switches
Emergency stop illuminated
pushbutton switches
the number of contacts.
The terminal cover must be attached in the correct direction. Make
sure that the triangular on the terminal cover is aligned with the
inverted triangular on the top of the unit. Also, when wiring the switch,
check the alignment of these triangles and insert the wires correctly
through the corresponding holes in the terminal cover.
The nameplate must be attached. Attach the nameplate to an
appropriate part, such as the panel, after removing the paper from the
back of the nameplate.
nameplate will be attached with alcohol.
The nameplate may come off if the surface is dirty or oily.
Remove portions ① and ② from the center of the nameplate, aligh the
nameplate with the panel cutout, and lightly press on the front surface
of the nameplate to attach it to the panel. Then remove portions ③
and ④ , and press on the entire front surface of the nameplate to
complate attaching it to the panel.
to operate the button by hand.
handle the button with excessive force.
use. Push and lock the switch only in an emergency.
temperature and humidity ranges.
not use the unit in places where special oils may be sprayed onto the
product.
frame, the switch may fail to operate normally.
exposed to direct sunlight.
effects of ozone or corrosive gases.
①
②
③ ④
1
a
2
4 3
4 3
b
12
12
1 2
12
12
Top (marked with inverted triangular)
Terminals 1-2 : b (NC) contact terminals
Terminals 3-4 : a (NO) contact terminals
Terminals a-b : Lamp terminals
a
1 2
34
b
12
12
Inverted triangular ( )
Wires
Triangular on terminal cover mark
Type 1NC 2NC 4NC
AR16V0R 19.0 19.4 20.0
AR16V1R 21.1 21.5 22.1
AR16V0L 19.7 20.1 20.7
AR16V1L 21.8 22.2 22.8
64.
65. 2013-05 PDF FOLS 62E1-E-0119aInformation in this catalog is subject to change without notice.
5-7, Nihonbashi Odemma-cho, Chuo-ku, Tokyo, 103-0011, Japan
URL http://www.fujielectric.co.jp/fcs/eng
Safety Considerations
wiring.