2. New Technology Overman specialises in designing, developing, Manufacturing and supply complete
Hot Air Solder Levellers, HASL Process lines, Vertical Plating lines and equipment for surface treatment
processes in the Printed Circuit Board industry.
- Development/design of parts or complete systems for surface treatment processes in the
Printed Circuit Board industry.
- Adapting, upgrading and altering existing surface treatment process lines or machines.
- Delivery of parts or complete systems for (Final) Finishing processes in the Printed Circuit Board
industry.
- Delivery of spare parts for "LANTRONIC" machines and "DEPELTRONIK" machines (Depeltronik parts
only in the Benelux)
WHO IS NEW TECHNOLOGY OVERMAN
3. NTO main business is manufacturing Hot Air solder levellers
Available Type :
NTO-1818 (18”x 18”) Electrical controlled version
NTO-1824 (18”x 24”) PLC controlled or electrical controlled version
NTO-2424 (24”x 24”) PLC controlled or electrical controlled version
NTO-3030 (30”x 30”) PLC controlled or electrical controlled version
4. Main features NTO-HASL :
Max. Panel size : see machine type
Panel Thickness : 0,5mm – 6 mm (0.0008” - .250”)
All machines have a separate and adjustable air knife heating system
Solder pot is manufactured from St. steel 316 material
Easy access to the Solder pump
Simple and easy access for maintenance and cleaning purposes.
Air knives can be cleaned or adjusted easily
Flux or copper dross particles are easy to scoop out of the solder pot.
Exhaust on the top and left side (just above the air knives).
PLC versions :
PLC (Siemens S7 programed) controlled with HMI windows CE based Touch panel.
Easy and simple to operate program and 30 different settings.
Linear unit with drive motor controlled by PLC
Different panel size starting positions.
Solder pump runs with two variable speeds
“STAND-BY” mode
Thin core and flexible PCB guiding and clamping system.
MB connect web router for remote PLC and HMI monitoring, system programming and optimization from anywhere in the
world
5. SOLDER POT AND SOLDER PUMP :
Solder pot is manufactured from St. steel 316 material. (Better resistance against the attack of tin and flux)
Solder pot with special designed overflowing inner-pot with re-circulation pump.
Spent flux overflow drain system.
Solder pot completely insulated
Independent heating control system of the Solder pot.
Solder pump is on the right side of the solder pot to get easy access to maintenance and cleaning purposes.
The solder pump runs with two variable speeds controlled by the PLC. Solder pump runs in high speed (production speed)
and switch to low Speed (standby) after a specified expiration time when no production takes place.
A strong oxidation of the tin is avoided.
Easy access to the removable solder pump. (Within a few minutes)
Solder pump mounting plate can be removed for deep cleaning around the thermocouple and solder intake area.
6. CLAMPING SYSTEM AND AIR KNIFE
COMPARTMENT:
Clamp made of Titanium
Panel Thickness : 0,5mm – 6
mm (0.0008” x .250”)
Covers and panels are easy to
clean.
Covers simple and easy to remove
for access to the Air knives and
solder pot.
Delivered standard with a PCB
guiding systems. (Rigid boards)
Exhaust on the top and left side
(just above the air knives).
7. AIR KNIVES :
Air knife shells made of Titanium other parts out of St. steel.
Air knives are easy to remove for cleaning or adjusting purposes.
Release / lock mounting system
Self-cleaning !
Adjustable orifice
Air knife distance and angle can be adjusted.
Front panel pilot controlled pressure regulation with gauges.
8. AIR KNIFE HEAT EXCHANGER:
Special designed St. steel heat exchanger for
heating up the air knife air.
Separate and adjustable air knife heating
system and is independent of the heating
control of the Solder pot.
Heat exchanger provided with strip heaters,
covering and completely insulated.
Required lead free air heat of 250/270°C
(480/520° F) is feasible.
9. ELECTRO AND SAFETY :
Chosen and reliable electrical components are
used such as Siemens, Eaton, SEW.
Clear and concise component marking and wire
labels.
Automatic operator safety window, safety
switches on all doors.
Separate temperature measurement such as
thermocouple and over temperature devices
are built in the solder pot and heat exchanger.
Temperature is controlled by a temperature
controller and over temp. Temperature is
monitored by the thermocouples.
Alarm/failure list (PLC versions)
Auxiliary for exhaust fan. (MCB + controlling)
10. PLC AND TOUCH PANEL :
PLC (Siemens S7 programed) controlled with HMI windows CE based Touch panel.
Easy and simple to operate program and touch panel.
30 different settings can be stored (Recipes)
Linear unit with drive motor controlled by PLC. Variable speed controlled for up and down speed.
1 or 2 cycles programmable in the recipe.
Different panel size starting positions are selectable.
Standard with simple “visual management” based instructions which can be implemented in the company
quality system.
11. OPTIONAL FEATURES :
Flexible PCB :
Flexible PCB guiding system with Thin Core Fixturing.
System provided with an extra clamp.
45° degree clamping using the “Y” holder
Remote maintenance solution for machines with mbCONNECT24 :
MB Connect Line's remote maintenance building blocks offer
you the following options in terms of a hardware and
software platform:
Rapid, location-independent access to machines and systems
Short downtimes due to efficient service in the event of a
breakdown
System monitoring for faults, or exceeded limits, with alarms
via email or SMS
Logging of relevant operating data for archiving and trend
analysis
Easy monitoring and visualization of globally distributed
installations, even via smartphone
System programming and optimization from anywhere in the
world
Flexibility, thanks to the use of recognized web and IT
standards
12. New Technology Overman machines are proudly
Made in The Netherlands
THANK YOU FOR YOUR TIME.
HOPE TO SEE YOU SOON !!!
