54261508 4
•Download as DOCX, PDF•
0 likes•121 views
1) The weekly report discusses progress made by the engineering team on their product design. 2) On Tuesday, the student installed a water heater and discussed poster data with ID students. In the evening, the group created a product manual and circuit diagrams. 3) Strengths included thorough understanding of the water heater process, while not having a water pump required finding an alternative with rubber tubing.
Report
Share
Report
Share
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 9, 2012
Name-Surname NuttapongHansiriwattanakit
Student ID. 54261508
Group Name Is
Engineering Team Jane , Best ,Not ,Su ,Jum-O ,Love , Tew ,Go ,Mut and
Members Benz
Product Design
Sa-tang ,Ped ,Fon ,Tip ,Earng[ID] and Mind [interior]
Team Members
Weekly Progress
In Tuesday morning, I went to Bang-Khun-Tien for installing the water heater and
also discussed with ID students. The topic we discussed with them is about the data
of poster that what should it have.
In Tuesday evening, our group did report together. My duties are drawing the
equipments into manual and describing the circuit such as regulator that use
switching-circuit and convert 12 VAC to be 5 VDCand etc.
Figure 1.Installingelectronic equipment
Figure 2. Group’s discussion
Engineering Analysis
Strong Point
- I know the work process of water heater thoroughly.
Week Point
- Therefore, we didn’t have the water pump so we had to find out the rubber tube instead of.
This one is so complex.
Next Week Job
We have already done the job!
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/542615084-120508145058-phpapp01/85/54261508-4-1-320.jpg)
Recommended
54261507 281 4
1) The report provides an update on the weekly progress of the Instinct group's product design project.
2) This week, the student assembled the circuit and improved the design from the first version, testing the sensor's sensitivity and accuracy with different food wastes.
3) Engineering analysis found that the sensor has high precision without uncertainty according to its datasheet, though integrating the circuit into the machine still needs work.
Weekly report 3
The weekly report summarizes the progress of a multidisciplinary workshop group. It discusses that the student completed the LED function for their part of the project and helped recheck circuits on the PCB board for other group members. It was challenging to combine all parts into the final product due to the time it took. Next steps include preparation for the presentation.
Weekly report template5
This weekly report summarizes the progress of group "Fuang" in designing an electric kettle. The engineering team studied the design process and product elements. They are learning microcontroller programming to control the kettle. Next week, the team will apply their learning to other electrical appliances. The group is still working to resolve design and life cycle issues for the optimal kettle design.
Weekly report template (5)
1) The engineering team from KID-WA Company includes 12 members working on product design and microwave projects.
2) In the past week, the report's author checked the PCB circuit pattern for their microwave project and found it to be lacking.
3) Figures 1 and 2 show the circuit designs, while the engineering analysis notes strengths in helping others and weaknesses in needing to re-work some circuit soldering.
Weekly report 2
The student designed a comparator and isolation circuit printed circuit board using Altium designer 10. They switched from a switching power supply to a transformer power supply due to voltage ripple issues. For next week, the student plans to design printed circuit boards for all remaining circuits in the project. The strong point is PCB design skills, and the weak point is the large size of the power supply.
Inc2812
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student replaced the power transformer with an adapter to provide enough power for the circuit to operate properly with the machine. While the PCB assembly had some errors, the overall job will be completed next week. The report provides an update on a circuit power issue solved by changing the power source, along with next steps to finish the project.
Weekly report 2
This weekly report discusses progress made by an engineering team. It modified a circuit by addressing a failure in the selector circuit from not reading the datasheet. A temperature sensor was installed at a pump and the circuit and sensor were installed, though the circuit was not on a printed circuit board due to time constraints. The next steps are to present the project.
Weekly report 53211816
This weekly report summarizes the progress of an engineering student group working on a food spoilage detection product. The group changed the sensor from a pH sensor to a CO2 sensor because the pH sensor required complex calibration. The circuit will control the opening and closing of a valve. The CO2 sensor will detect changes over 15 minutes and output millivolt signals that will be processed through expansion, comparison, and logic circuits to display the food status. The strong point of the design is its easy circuit. The weak point is that the CO2 sensor has high resolution but low changing CO2 levels, so detection may only work for very spoiled food. Next week, the student will measure food CO2 levels in a lab and gather data
Recommended
54261507 281 4
1) The report provides an update on the weekly progress of the Instinct group's product design project.
2) This week, the student assembled the circuit and improved the design from the first version, testing the sensor's sensitivity and accuracy with different food wastes.
3) Engineering analysis found that the sensor has high precision without uncertainty according to its datasheet, though integrating the circuit into the machine still needs work.
Weekly report 3
The weekly report summarizes the progress of a multidisciplinary workshop group. It discusses that the student completed the LED function for their part of the project and helped recheck circuits on the PCB board for other group members. It was challenging to combine all parts into the final product due to the time it took. Next steps include preparation for the presentation.
Weekly report template5
This weekly report summarizes the progress of group "Fuang" in designing an electric kettle. The engineering team studied the design process and product elements. They are learning microcontroller programming to control the kettle. Next week, the team will apply their learning to other electrical appliances. The group is still working to resolve design and life cycle issues for the optimal kettle design.
Weekly report template (5)
1) The engineering team from KID-WA Company includes 12 members working on product design and microwave projects.
2) In the past week, the report's author checked the PCB circuit pattern for their microwave project and found it to be lacking.
3) Figures 1 and 2 show the circuit designs, while the engineering analysis notes strengths in helping others and weaknesses in needing to re-work some circuit soldering.
Weekly report 2
The student designed a comparator and isolation circuit printed circuit board using Altium designer 10. They switched from a switching power supply to a transformer power supply due to voltage ripple issues. For next week, the student plans to design printed circuit boards for all remaining circuits in the project. The strong point is PCB design skills, and the weak point is the large size of the power supply.
Inc2812
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student replaced the power transformer with an adapter to provide enough power for the circuit to operate properly with the machine. While the PCB assembly had some errors, the overall job will be completed next week. The report provides an update on a circuit power issue solved by changing the power source, along with next steps to finish the project.
Weekly report 2
This weekly report discusses progress made by an engineering team. It modified a circuit by addressing a failure in the selector circuit from not reading the datasheet. A temperature sensor was installed at a pump and the circuit and sensor were installed, though the circuit was not on a printed circuit board due to time constraints. The next steps are to present the project.
Weekly report 53211816
This weekly report summarizes the progress of an engineering student group working on a food spoilage detection product. The group changed the sensor from a pH sensor to a CO2 sensor because the pH sensor required complex calibration. The circuit will control the opening and closing of a valve. The CO2 sensor will detect changes over 15 minutes and output millivolt signals that will be processed through expansion, comparison, and logic circuits to display the food status. The strong point of the design is its easy circuit. The weak point is that the CO2 sensor has high resolution but low changing CO2 levels, so detection may only work for very spoiled food. Next week, the student will measure food CO2 levels in a lab and gather data
54261510 4
This weekly report discusses progress made by a student group working on a product design. The student helped a friend design a new circuit for a power supply since the original circuit was not working. They purchased components and are working to fix issues with carbon gas sensors. The circuit has advantages of being small and portable but cables are cumbersome. Next week, the student will continue working with their team on further development.
54261530_4
The weekly report summarizes the progress of the KID-WA COMPANY engineering team. The team members are working on product designs called P' Tong, P' Joy, P' Kong, and P' Aru. This week, the report's author Amontep Watta worked on power supply circuits inside a microwave and refrigerator. Figures 1 and 2 show the circuits. The engineering analysis found that the circuit performance was not optimal and requires updates to work as intended. Next week, Amontep will present on the work.
54261526
The engineering team worked on circuit design and PCB layout this week. They tested circuits using a program and an actual PCB. Figures 1 and 2 show the 3D model and layout of the PCB. Strengths included circuit design and calculation skills. Weaknesses included a lack of free time. Next week's work will include adding devices to the PCB and testing the circuit.
54261507 281 3
Chutipong Kankamnanta submitted a weekly report for their group called Instinct. This week, they programmed a microcontroller connected to a sound chip and tested it until it was working properly. They then created a PCB board and installed it into the product body, checking that the circuit was complete and functioning as intended. Next week, they will create a summary and report of their work.
Weekly report template3
This weekly report discusses work done by the engineering team on a pet care product. The report indicates that this week, the team member removed old components from a microwave and checked the circuit board design and connections using a multimeter. Their next steps are to prepare a presentation. Issues identified include errors in the printed circuit board layout.
54261503
This weekly report discusses progress on a rice cooker project. The student designed a PCB circuit board with a microcontroller and real-time clock chip. Testing found the touch switch circuit was unstable due to insufficient current. The student replaced the touch switch with a microswitch, making the circuit stable. Next steps are to design an improved touch switch PCB with adequate current supply.
53211830
The weekly report summarizes the progress of the Engineering Team working on a rice cooker project. In the weekly presentation, the advisor commented that the current rice cooker design lacks innovation and suggested focusing on an innovative interface design while ignoring other functions beyond basic cooking. The team's strong points are good teamwork, logical thinking, and relationships, while needing more information on interface design is a weakness. The next steps are to complete the circuit design.
Weekly report
This weekly report summarizes the progress of a student group working on an electronic kettle product design. The group chose an electric kettle as their real product that has the functions of adjustable temperature levels up to 100 degrees Celsius and an LCD screen to display the temperature. They are using a heating coil for heating and a thermocouple to measure temperature, though the thermocouple is expensive. This week they received the real product but had problems answering questions and lacked sufficient data for their presentation. Their analysis found the kettle has a new unique function but the group lacked communication and data. Their goals for next week are a new presentation, changing the temperature measurement device, and studying the electronic components more.
54261510
This weekly report summarizes the progress of the Instinct Engineering Team. It details that student Nattapat Boonpat worked on researching LEDs and found that normal LEDs are simpler, cheaper and easier to use than RGB LEDs. It also notes that last week they had to work on gas sensors because it is part of the output system, although the output did not match the data sheet specifications. The report was submitted to the Department of Control System and Instrumentation Engineering at King Mongkut's University of Technology Thonburi.
Weeklyreporttemplate 120321011755-phpapp02
The Instinct design group discussed replacing the heat function of their P' Jub product with a sound function. The product will emit warning sounds and display messages on an LED if food is not heating properly or the equipment malfunctions. It can use a battery and be recharged. Sensors will detect gases from food after 5 minutes of cooking and trigger warnings if gas levels are sufficient. The team's strong point is the clear warning sounds, while an area for improvement is that older users may not see the LED messages. Next week the group will assign specific work tasks to members.
Weekly report 2
The weekly report summarizes the progress of student Thanaphon Yeamkam and his group on their multi-disciplinary workshop project. This week, Thanaphon designed a comparator and isolation circuit printed circuit board using surface mount devices to minimize the circuit size. He had issues with the initial switching power supply design due to voltage ripple, so switched to a transformer design for a more stable power supply. Next week, he plans to design printed circuit boards for all remaining circuits.
รายงาน4
The weekly report discusses progress on an air purifier product. The engineering team found problems this week including a defective control board, LEDs that did not light equally, and an unresponsive touch switch. They worked to solve these issues based on circuit designs from another student. While the purifier circuits now function, uneven LED brightness remains a weakness. Next week's task is to present the completed product.
Weekly report template (2)
The weekly report summarizes the progress of an engineering student group called 361 degrees. They have been working on a circuit project involving an MP3 module, memory, and amplifier. The MP3 module is functioning effectively but connecting the full circuit to test it has posed challenges. Next week, the group aims to integrate a microcontroller to trigger the MP3 module with a switch. Figures 1 and 2 show the memory socket and memory component of the circuit design.
Weekly report template
The weekly report summarizes the progress of the Instinct design group working on the P' Jub food warmer product. The group met with their teacher and decided not to include a display. They consulted on heating materials and sensor protection. Their engineering analysis found warming uneaten food to be a strength, and visibility of LEDs for older users to be a weakness. Next week they will assign work among members.
Weekly report template[1]
1. The weekly report discusses progress on a smart table product concept being developed by the Korekon company engineering team.
2. The product concept involves a glass table with integrated lighting that can be adjusted for different lighting intensities to create a paradise-like atmosphere.
3. It also includes an induction cooker built into the table that can be controlled by touch sensors without buttons to keep food warm during meals.
4. However, the architecture and engineering teams had differing ideas and lack of planning led the company to consult with other groups on combining efforts.
53211841
1. The weekly report summarizes progress made by the Habitทย group on their mosquito trap project.
2. Weerawat studied how black light bulbs wrapped in TiO2 work using UV light and TiO2 to produce CO2 to attract mosquitoes.
3. Boon presented the project to Aj. Phanutas, outlining key features of the equipment such as charging, timing functions, and battery level display.
Weekly report template (5)
The weekly report summarizes the progress of the KID-WA COMPANY engineering team. This week, team member Amontep Watta helped with componenting the PCB circuit board by designing and etching the copper sheet. Figures 1 and 2 show circuit designs for a refrigerator and microwave. The engineering analysis found that the circuit is not yet complete. Next week, the team will prepare for a teacher presentation and question answering.
Reportprojectgo4
The weekly report summarizes the progress of the IS Company engineering team. The team members met to discuss their engineering jobs for various projects this week, including meetings about the projects and functions of a water heater. They designed a poster and learned how to install and test a machine. Upcoming jobs for next week were not detailed in the 3 sentence report.
1111
This weekly report from an engineering student describes the progress of Group 8 on their toaster project. The group created a circuit board for their toaster by modifying the design based on teacher feedback. They tested the circuit and their goals for next week are to finish the entire project. The report provides an update on the circuit development and plans to complete the toaster design.
4 segments basic segmentation
4Segments™ helps you quickly and effectively understand and segment your market using an innovative, simple, and intuitive graphical interface.
Chart Book Jan
The document provides an economic overview of the United States in January 2010. It notes that consumer confidence and retail sales rebounded in late 2009, translating to strong GDP growth in Q4. However, it expects GDP growth to slow to 2-3% in 2010 as inventory contributions decrease and unemployment remains high. The housing market also showed some signs of stabilization but foreclosure and delinquency rates remained elevated due to high unemployment, suggesting further troubles for the housing sector.
More Related Content
What's hot
54261510 4
This weekly report discusses progress made by a student group working on a product design. The student helped a friend design a new circuit for a power supply since the original circuit was not working. They purchased components and are working to fix issues with carbon gas sensors. The circuit has advantages of being small and portable but cables are cumbersome. Next week, the student will continue working with their team on further development.
54261530_4
The weekly report summarizes the progress of the KID-WA COMPANY engineering team. The team members are working on product designs called P' Tong, P' Joy, P' Kong, and P' Aru. This week, the report's author Amontep Watta worked on power supply circuits inside a microwave and refrigerator. Figures 1 and 2 show the circuits. The engineering analysis found that the circuit performance was not optimal and requires updates to work as intended. Next week, Amontep will present on the work.
54261526
The engineering team worked on circuit design and PCB layout this week. They tested circuits using a program and an actual PCB. Figures 1 and 2 show the 3D model and layout of the PCB. Strengths included circuit design and calculation skills. Weaknesses included a lack of free time. Next week's work will include adding devices to the PCB and testing the circuit.
54261507 281 3
Chutipong Kankamnanta submitted a weekly report for their group called Instinct. This week, they programmed a microcontroller connected to a sound chip and tested it until it was working properly. They then created a PCB board and installed it into the product body, checking that the circuit was complete and functioning as intended. Next week, they will create a summary and report of their work.
Weekly report template3
This weekly report discusses work done by the engineering team on a pet care product. The report indicates that this week, the team member removed old components from a microwave and checked the circuit board design and connections using a multimeter. Their next steps are to prepare a presentation. Issues identified include errors in the printed circuit board layout.
54261503
This weekly report discusses progress on a rice cooker project. The student designed a PCB circuit board with a microcontroller and real-time clock chip. Testing found the touch switch circuit was unstable due to insufficient current. The student replaced the touch switch with a microswitch, making the circuit stable. Next steps are to design an improved touch switch PCB with adequate current supply.
53211830
The weekly report summarizes the progress of the Engineering Team working on a rice cooker project. In the weekly presentation, the advisor commented that the current rice cooker design lacks innovation and suggested focusing on an innovative interface design while ignoring other functions beyond basic cooking. The team's strong points are good teamwork, logical thinking, and relationships, while needing more information on interface design is a weakness. The next steps are to complete the circuit design.
Weekly report
This weekly report summarizes the progress of a student group working on an electronic kettle product design. The group chose an electric kettle as their real product that has the functions of adjustable temperature levels up to 100 degrees Celsius and an LCD screen to display the temperature. They are using a heating coil for heating and a thermocouple to measure temperature, though the thermocouple is expensive. This week they received the real product but had problems answering questions and lacked sufficient data for their presentation. Their analysis found the kettle has a new unique function but the group lacked communication and data. Their goals for next week are a new presentation, changing the temperature measurement device, and studying the electronic components more.
54261510
This weekly report summarizes the progress of the Instinct Engineering Team. It details that student Nattapat Boonpat worked on researching LEDs and found that normal LEDs are simpler, cheaper and easier to use than RGB LEDs. It also notes that last week they had to work on gas sensors because it is part of the output system, although the output did not match the data sheet specifications. The report was submitted to the Department of Control System and Instrumentation Engineering at King Mongkut's University of Technology Thonburi.
Weeklyreporttemplate 120321011755-phpapp02
The Instinct design group discussed replacing the heat function of their P' Jub product with a sound function. The product will emit warning sounds and display messages on an LED if food is not heating properly or the equipment malfunctions. It can use a battery and be recharged. Sensors will detect gases from food after 5 minutes of cooking and trigger warnings if gas levels are sufficient. The team's strong point is the clear warning sounds, while an area for improvement is that older users may not see the LED messages. Next week the group will assign specific work tasks to members.
Weekly report 2
The weekly report summarizes the progress of student Thanaphon Yeamkam and his group on their multi-disciplinary workshop project. This week, Thanaphon designed a comparator and isolation circuit printed circuit board using surface mount devices to minimize the circuit size. He had issues with the initial switching power supply design due to voltage ripple, so switched to a transformer design for a more stable power supply. Next week, he plans to design printed circuit boards for all remaining circuits.
รายงาน4
The weekly report discusses progress on an air purifier product. The engineering team found problems this week including a defective control board, LEDs that did not light equally, and an unresponsive touch switch. They worked to solve these issues based on circuit designs from another student. While the purifier circuits now function, uneven LED brightness remains a weakness. Next week's task is to present the completed product.
Weekly report template (2)
The weekly report summarizes the progress of an engineering student group called 361 degrees. They have been working on a circuit project involving an MP3 module, memory, and amplifier. The MP3 module is functioning effectively but connecting the full circuit to test it has posed challenges. Next week, the group aims to integrate a microcontroller to trigger the MP3 module with a switch. Figures 1 and 2 show the memory socket and memory component of the circuit design.
Weekly report template
The weekly report summarizes the progress of the Instinct design group working on the P' Jub food warmer product. The group met with their teacher and decided not to include a display. They consulted on heating materials and sensor protection. Their engineering analysis found warming uneaten food to be a strength, and visibility of LEDs for older users to be a weakness. Next week they will assign work among members.
Weekly report template[1]
1. The weekly report discusses progress on a smart table product concept being developed by the Korekon company engineering team.
2. The product concept involves a glass table with integrated lighting that can be adjusted for different lighting intensities to create a paradise-like atmosphere.
3. It also includes an induction cooker built into the table that can be controlled by touch sensors without buttons to keep food warm during meals.
4. However, the architecture and engineering teams had differing ideas and lack of planning led the company to consult with other groups on combining efforts.
53211841
1. The weekly report summarizes progress made by the Habitทย group on their mosquito trap project.
2. Weerawat studied how black light bulbs wrapped in TiO2 work using UV light and TiO2 to produce CO2 to attract mosquitoes.
3. Boon presented the project to Aj. Phanutas, outlining key features of the equipment such as charging, timing functions, and battery level display.
Weekly report template (5)
The weekly report summarizes the progress of the KID-WA COMPANY engineering team. This week, team member Amontep Watta helped with componenting the PCB circuit board by designing and etching the copper sheet. Figures 1 and 2 show circuit designs for a refrigerator and microwave. The engineering analysis found that the circuit is not yet complete. Next week, the team will prepare for a teacher presentation and question answering.
Reportprojectgo4
The weekly report summarizes the progress of the IS Company engineering team. The team members met to discuss their engineering jobs for various projects this week, including meetings about the projects and functions of a water heater. They designed a poster and learned how to install and test a machine. Upcoming jobs for next week were not detailed in the 3 sentence report.
1111
This weekly report from an engineering student describes the progress of Group 8 on their toaster project. The group created a circuit board for their toaster by modifying the design based on teacher feedback. They tested the circuit and their goals for next week are to finish the entire project. The report provides an update on the circuit development and plans to complete the toaster design.
What's hot (19)
Viewers also liked
4 segments basic segmentation
4Segments™ helps you quickly and effectively understand and segment your market using an innovative, simple, and intuitive graphical interface.
Chart Book Jan
The document provides an economic overview of the United States in January 2010. It notes that consumer confidence and retail sales rebounded in late 2009, translating to strong GDP growth in Q4. However, it expects GDP growth to slow to 2-3% in 2010 as inventory contributions decrease and unemployment remains high. The housing market also showed some signs of stabilization but foreclosure and delinquency rates remained elevated due to high unemployment, suggesting further troubles for the housing sector.
Why 4Segment
4Segments™ helps you quickly and effectively understand and segment your market using an innovative, simple, and intuitive graphical interface.
DEBER HPA
El documento describe una clase impartida en el aula sobre las características de la ciencia. La clase utilizó computadoras, proyectores, smartphones y tabletas, e involucró modelos de interacción uno a muchos y uno a uno. Videos, diapositivas e infografías se usaron como recursos didácticos digitales, mientras estrategias como interactuar, analizar, investigar y observar se aplicaron. Las competencias del siglo 21 desarrolladas incluyeron la colaboración, creatividad, uso de dispositivos tecnológicos e investig
RhiannaMattews FMS503 Digital Publishing
Rhianna Matthews is creating a website for her Digital Publishing course that will showcase her fashion editorial work. Her 12 week production schedule outlines the timeline for researching, planning, shooting and editing the website. She has chosen to model her site after the fashion destination Oki-ni, targeting men aged 19-30 interested in streetwear fashion. Over the next few weeks, Rhianna will travel to Amsterdam to shoot editorials featuring autumn/winter trends like denim and wool jackets, as well as a shoe GIF editorial using on-trend trainers. The clean and spacious design of her site will display her editorial photos and GIF.
We're Off To See The Wizard - SWOC
In this entertaining presentation you will be introduced to using "The Wizard of Oz" as a metaphor for stakeholder management. Bas will be talking about The Yellow Brick Road-technique, keeping the Wicked Witch of The West out of your project, and, well, going to see the Wizard.
Managing the expectations and involvement of your stakeholders is an important element in project success. But not everyone likes conventional management techniques like being plotted in quadrants. Some approaches might even be intimidating.
When using this famous musical as a metaphor Stakeholder Management becomes easy to understand and fun. And still addressing important issues.
Everything A PM Should Know About Social Media - SWOC
Sites like Facebook, LinkedIn, Youtube, Twitter and blogs in general are primary concerned with social interaction, hence the “social” in media. Anything that can help improve communication in any context, but especially in a business environment, is more than welcome.
Within the world of projects bad communication is traditionally the number one project killer. Problems all ready occur in an setting where team members and stakeholders are in one building, speaking the same language. The use of virtual, distributed teams has only increased the challenges in the communication department.
Putting home movies on YouTube is not going to solve all these issues. But the way these tools are constructed enable improved communication when face-to-face interaction is not feasible.
Sage and sales logix special issues
Want to integrate Eloqua and SalesLogix or Sage Software? Both connect using SData and this video covers the specific issues to consider when connecting the Oracle Marketing Cloud to either product.
Lesson 3 listening to (으)세요 (2)
The document provides instructions for 10 listening activities where students practice filling in blanks of sentences with verb predicates conjugated with -(으)세요 based on audio dialogues. The activities involve conversations between a professor and students in a Korean linguistics class. Students are asked to listen carefully and fill in the blanks with the correct verb conjugation.
Passport Project 2011
The Passport Project is a revolutionary initiative to drastically change the current state of U.S. Millennial international travel.
Science europe guibault27202015
Lucie Guibault, 'Is Europe Falling Behind in Data Mining?', Presentation at Science Europe Workshop "Importance of Text and Data (content) mining for Science", Brussels, 27 October 2015
Jkl and hypa case control paper revision for special issue 08-11-2015
Choir singing paper - November-2015. Kuorolaulun tieteellinen tutkimus lähdössä tieteelliseen lehteen.
Oracle Marketing Cloud for Travel & Hospitality
Highlights the advantages of using Oracle's Marketing Cloud with a focus on the Travel & Hospitality Industry.
Chanel Gray BSN RN Resume January 2016
Chanel Gray is a registered nurse seeking new opportunities. She has over 3 years of nursing experience in bone marrow transplant and transitional care units at the VHA Puget Sound in Seattle. Her experience includes charge nurse duties, team leading, medication administration, extensive wound care, and coordinating care. She has a BSN from the University of Portland and is licensed in Washington State. References are provided from her current and past managers who can speak to her clinical skills and dedication as a team player.
Passport
This document provides information about passport requirements and regulations. It defines a passport as an official document issued by a government that identifies a citizen and allows them to travel internationally. The document outlines what information passports contain, the different types of passports issued in India (ordinary, official, diplomatic), validity periods, how to apply for a passport and required documents. It also briefly discusses citizenship and how it can be obtained through birth, parents, naturalization, marriage or other means.
Viewers also liked (17)
Everything A PM Should Know About Social Media - SWOC
Everything A PM Should Know About Social Media - SWOC
Jkl and hypa case control paper revision for special issue 08-11-2015
Jkl and hypa case control paper revision for special issue 08-11-2015
【KSKアナリティクス】 NYSOL 使い方 【後編】 オープンデータ 分析 － 頻出パターン の作成・可視化 －
【KSKアナリティクス】 NYSOL 使い方 【後編】 オープンデータ 分析 － 頻出パターン の作成・可視化 －
Similar to 54261508 4
Nattawat#4 54261511
Nattawat Boonmee submitted a weekly report for his group's water heater project. This week, they contacted the product design team to modify the PCB board temperature and position under teacher guidance. They also tested compatibility with the design team and researched engineering information for their report. Their water heater can control temperature, display water level in 7 steps and temperature rotation. In analysis, the circuit works together but they lacked time to test long term stability. Next week they will present the final project and paper.
Nattawat#3 54261511
Nattawat Boonmee reports on his group's progress designing a water heater circuit. This week, they designed and built a finished PCB circuit with segments that were all tested to function properly. Nattawat was responsible for the microcontroller interface and LED driver, which were found to work together with the circuit. The group connected the electronic components to the water heater designed by the Product Design team. Initial testing showed the water could be heated to 40 degrees Celsius. Next week, Nattawat will record performance tests to document in a report.
54261508
1. NuttapongHansiriwattanakit submitted a weekly report for their multidisciplinary workshop group on their product design.
2. The group tested a water heater circuit using variable resistors and measured the temperature at different resistor values.
3. In their engineering analysis, their strong point was understanding how the water heater circuit operates using a variable resistor to control voltage and temperature, while their weak point was needing to study the boiler datasheet to determine the proper voltage for temperature control.
54261533
The weekly report discusses progress made by an engineering group working on a water heater. They installed a circuit into the water heater's structure and tested it, finding that almost all components worked properly. However, the water temperature was inconsistent due to uneven water flow. Their next steps are to modify the circuit to address errors and test it again.
54261508 3
The weekly report summarizes the progress of an engineering team working on a product design. In part one, the team installed electronic equipment and components on a PCB board and chassis. In part two, they tested the circuit by inputting power and water, and found the machine operated as intended. Their strong point was taking safety precautions when testing the 220V circuit. Their weak point was limited time to fully test the circuit. Next week they will check everything before their presentation.
54261533
This weekly report discusses the progress of the INC 281 Multidisciplinary Workshop engineering team. It details that the student installed a water heater, created an engineering work video, helped fix products under teacher guidance, and tested product functions. Their strong point was gaining electronic testing experience, and their weakness was difficulty locating equipment errors. Their next week's job is completed.
Weekly report3
This weekly report discusses the progress of an engineering student group working on a water heater product. The group identified functions for their water heater including displaying water usage and temperature. They researched the basic circuit of water heaters and identified controlling stable temperature as an ongoing problem. Their analysis found increasing efficiency as a strong point but noted they lacked sufficient data and found adding new functions to water heaters challenging. Their next steps are to discuss function details and study electronics and circuits further.
54261517_4
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student reports changing the circuit power from a transformer to an adapter to provide enough power for circuit and machine operation. Engineering analysis found the strong point was beginning circuit and machine operation, while a weak point was errors in the assembled PCB requiring fixes. The next week's job is to complete the work.
Weekly Report
This weekly report summarizes the progress of group Fuang's engineering project. The group is designing a kettle that displays the heating state using LED lights and may include a touch screen interface. This week, the student searched for information on inductive heating systems and how they work by inducing currents in conductive materials using magnetic fields transformed from an electrical power source. The group aims to program a microcontroller but currently lacks knowledge in this area. Next week's task is to calculate component values for the kettle's circuit.
54261510 3
This weekly report summarizes the progress of a student group called Instinct working on a multidisciplinary engineering project. In the last week of the project, the student bought a device and battery but had limited time to work due to a job. They helped friends with battery charging and soldering a microcontroller programmed to connect to a sound chip. The circuit design is small and portable but uses cumbersome cables and has difficult soldering. Next week, the student will further develop the project and work with their team.
54261526
This weekly report summarizes the progress of an engineering team working on a product design. The team tested a circuit using variable resistors and measured the temperature at different resistor values. Their strong point was understanding water heater operation, while needing to study boiler datasheets and circuit analysis. Next week, they will connect a display and control circuit to the water heater circuit.
54261508 3
The weekly report summarizes the progress of an engineering team that is working on a product design. It discusses that in the first part of the week, the team installed electronic equipment and connected terminals on a circuit board and chassis. They then tested the circuit by inputting power and water to a water heater and found that the machine operated as intended. The report notes that wearing grounded shoes during circuit testing is important for safety. It concludes by stating that next week will involve checking all components before presenting.
54261508 3
The weekly report discusses the progress of an engineering team that is working on a product design. The team installed electronic equipment on a PCB board and connected terminals to the circuit. They then installed all components on a chassis and tested the circuit by inputting power and water, finding that the machine operated as intended. Their strong point was taking safety precautions when testing the 220V circuit. However, time limitations prevented fully testing the circuit, which could lead to errors. Next week they will check everything before presenting.
54261508
The weekly report summarizes the progress of the Engineering Team. They tested a circuit using a Toshiba resistor and measured the temperature at different resistor values. The team changed to a variable resistor which did not affect the temperature. A water heater circuit was connected to a microcontroller to measure water flow every 10 seconds. The strong point was knowledge of water heater circuits using variable resistors to control voltage. The weak point was needing to study boiler datasheets to understand controlling temperature with voltage. The next week's job is to design a new control.
Weekly report template
This weekly report discusses progress made by an engineering student group working on an automatic cooker project. The group discussed the industrial student's needs, including wanting an automatic cooker with a touch screen. The engineering team researched touch screen technology and processes. Their strengths include circuit analysis and wiring skills, while their weakness is microcontroller knowledge. Next week, they will design a circuit once the industrial students choose a single project to focus on.
53211824 9 feb2012#4
1) The weekly report discusses progress made by an engineering student group working on a water heater design project.
2) This week, the group learned about the Altium Designer PCB design program and discussed the functions, energy efficiency, and main components of water heaters.
3) They decided to focus on designing a tankless water heater to support Toshiba, and will learn more about the internal components of water heaters by studying and dismantling a sample water heater.
Weekly report template_4
This weekly report summarizes the progress of an engineering student group called 361 degree. It discusses issues with installing a fan filter system that caused circuit damage due to wiring being too narrow. The engineering analysis section notes that circuits are being combined but communication between members needs improvement. The next week's goal is to have all circuits working.
Weekly report 1
This weekly report summarizes the progress of a student group working on a mosquito killing machine product. In the report, the student discusses having issues with the power supply not providing enough current for all parts of the product, including the LED function they are working on. The student learned it is better to design based on the desired power of the LED first before calculating the needed current and voltage. While they gained knowledge on transistor circuits, the group still needs to resolve the power supply issue to balance the demands of all parts. Next steps are to determine the voltage to be used.
Weekly report template 3
The weekly report summarizes the progress of an engineering team working on an LED circuit insert for a product. In the past week, the team inserted the circuit into a PCB and measured its accuracy. This week, they will connect the circuit to other functions and test its operation within the full product before final integration. Their next steps are to address compatibility issues with the product design and continue testing.
Weekly report 2
This weekly report summarizes the progress of an engineering team. It discusses creating a PCB using dry film and acid etching. Circuits for comparison and isolation were built and are now working. The strong point was completing the PCB, while the weak point was not finishing installation of equipment. The goal for next week is to have all circuits working.
Similar to 54261508 4 (20)
More from Nuttapong Hansiriwattanakit
54261508 2
The weekly report discusses progress on a product design project. Members calculated a phase control circuit and tested it, finding a maximum temperature of 43 degrees Celsius. The student learned how to use Proteus software to design an electronic circuit PCB. Their strong point was learning something new this week, while their weak point was lacking programming and Proteus design knowledge. Next week they will connect and test all circuits.
54261508 2
The weekly report discusses progress on a product design project. Members calculated a phase control circuit and tested it, finding a maximum temperature of 43 degrees Celsius. The student learned how to use Proteus software to design an electronic circuit printed circuit board. Next week, the circuits will be connected and tested together.
54261508
The weekly report submitted by Nuttapong Hansiriwattanakit on April 4, 2012 provides an update on work developing an omnidirectional wheeled platform. The platform uses Mecanum wheels controlled by a motor driver receiving commands from a controller. A drive circuit connects the controller to the Mecanum wheel motors. The report is submitted for the INC 281 Multidisciplinary Workshop course at King Mongkut's University of Technology Thonburi.
54261508
This document provides operating instructions for an analog oscilloscope. It describes the controls and inputs including the power button, intensity knob, trace rotation knob, time/div knob, channel selection buttons, and trigger mode and level controls. The document also mentions measuring voltage and time, as well as connecting probes to the analog channels for measurement.
54261508
This document provides instructions for operating an analog oscilloscope. It describes the controls and inputs including the power button, focus knob, trace rotation knob, intensity knob, time/div knob, voltage div knobs, channel selection buttons, trigger mode button, and AC/DC/GND inputs. The document also references operating a digital oscilloscope and provides brief descriptions of its menu options, auto settings, and save/recall functions.
การบ้าน
This document provides instructions for operating an analog oscilloscope. It describes the controls and inputs including the power button, focus knob, trace rotation knob, intensity knob, time/div knob, channel selection buttons, and voltage and timebase settings. The document also covers connecting signal inputs, triggering options, and using the oscilloscope to measure voltage and time intervals.
More from Nuttapong Hansiriwattanakit (6)
Recently uploaded
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
In this article, we will dive into the extraordinary life of Ellen Burstyn, where the curtains rise on a story that's far more attractive than any script.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar.2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Transport Solution
DearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
IMG_20240615_091110.pdf dpboss guessing
Satta matka fixx jodi panna all market dpboss matka guessing fixx panna jodi kalyan and all market game liss cover now 420 matka office mumbai maharashtra india fixx jodi panna
Call me 9040963354
WhatsApp 9040963354
Recently uploaded (20)
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
Ellen Burstyn: From Detroit Dreamer to Hollywood Legend | CIO Women Magazine
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
54261508 4
- 1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 9, 2012 Name-Surname NuttapongHansiriwattanakit Student ID. 54261508 Group Name Is Engineering Team Jane , Best ,Not ,Su ,Jum-O ,Love , Tew ,Go ,Mut and Members Benz Product Design Sa-tang ,Ped ,Fon ,Tip ,Earng[ID] and Mind [interior] Team Members Weekly Progress In Tuesday morning, I went to Bang-Khun-Tien for installing the water heater and also discussed with ID students. The topic we discussed with them is about the data of poster that what should it have. In Tuesday evening, our group did report together. My duties are drawing the equipments into manual and describing the circuit such as regulator that use switching-circuit and convert 12 VAC to be 5 VDCand etc. Figure 1.Installingelectronic equipment Figure 2. Group’s discussion Engineering Analysis Strong Point - I know the work process of water heater thoroughly. Week Point - Therefore, we didn’t have the water pump so we had to find out the rubber tube instead of. This one is so complex. Next Week Job We have already done the job! Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI