Chutipong Kankamnanta submitted a weekly report for their group called Instinct. This week, they programmed a microcontroller connected to a sound chip and tested it until it was working properly. They then created a PCB board and installed it into the product body, checking that the circuit was complete and functioning as intended. Next week, they will create a summary and report of their work.

1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 2, 2012
Name-Surname Chutipong Kankamnanta
Student ID. 54261507
Group Name Instinct
M 53211801 Boss 53211808
Yui 53211835 Ball 53211836
Engineering Team
Kung 54261502 Arm 54261510
Members
Eui 54261518
Product Design P’ juk
Team Members P’ ploy
Weekly Progress
This week In this week. I used micro-controller that complete programed connect to sound integrated-
chip and edited error until it can working.
I made PCB and checking PCB. Then PCB is ok, I connect device to PCB and test for find error. After
checked all of circuit complete. I installed PCB to body of product and checked working process again.
Figure 1. Circuit back
Figure 2. Circuit front
Engineering Analysis
Strong Point
- Circuit is small.
Week Point
- Cumbersome cables.
Next Week Job
- Summary and report.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI

2. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 2, 2012
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI