Grateful 7 speech thanking everyone that has helped.pdf
Nattawat#4 54261511
1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 9, 2012
Name-Surname Nattawat Boonmee
Student ID. 54261511
Group Name IS (Water Heater)
Engineering Team
Nut, Love, Go, Jum-o, Tew, Jane, Best, Su and Not.
Members
Product Design
Sa-tang, Ped, Fon, Tip, Earng, Mind
Team Members
Weekly Progress
My project is Water Heater, This week we contacted the Product Design Team to various electronic
equipment to the water heater. We have modified the PCB board temperature. We can modify the
position of the PCB under the guidance of teachers. After that we made contact with the Product
Design Team to test compatibility again. At the same time, we have made a report trying to find
information related engineering at the beginning. We have a formula to calculate and verify the
accuracy of the information before the report. We are the idea of making the poster presentations.
The poster will describe our work in a range of water heaters and one that we have to do is present
the VDO. VDO by the third period 1.presentation Water Heater 2. Recommended to install the
water heater 3. Describe each circuit
Summary of the function Water Heater 1. Control the temperature of the water. 2. Display Water
level is 7 step (1 step = 2 Lits). 3. Display The temperature of the rotation button.
Figure 1. Front water heater Figure 2. Installation of the circuit with
I.D Team
Engineering Analysis
Strong Point
- The circuit Circuit can work together. All sectors.
Week Point
- Although the circuit can perform as expected. But we do not have time to test the long term. to
check the stability of the circuit.
Next Week Job
- This project was submitted last week.
- We will present a final project and send paper.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 9, 2012
Name-Surname Nattawat Boonmee
Student ID. 54261511
Group Name IS (Water Heater)
Engineering Team
Nut, Love, Go, Jum-o, Tew, Jane, Best, Su and Not.
Members
Product Design
Sa-tang, Ped, Fon, Tip, Earng, Mind
Team Members
Weekly Progress
My project is Water Heater, This week we contacted the Product Design Team to various electronic
equipment to the water heater. We have modified the PCB board temperature. We can modify the
position of the PCB under the guidance of teachers. After that we made contact with the Product
Design Team to test compatibility again. At the same time, we have made a report trying to find
information related engineering at the beginning. We have a formula to calculate and verify the
accuracy of the information before the report. We are the idea of making the poster presentations.
The poster will describe our work in a range of water heaters and one that we have to do is present
the VDO. VDO by the third period 1.presentation Water Heater 2. Recommended to install the
water heater 3. Describe each circuit
Summary of the function Water Heater 1. Control the temperature of the water. 2. Display Water
level is 7 step (1 step = 2 Lits). 3. Display The temperature of the rotation button.
Figure 1. Front water heater Figure 2. Installation of the circuit with
I.D Team
Engineering Analysis
Strong Point
- The circuit Circuit can work together. All sectors.
Week Point
- Although the circuit can perform as expected. But we do not have time to test the long term. to
check the stability of the circuit.
Next Week Job
- This project was submitted last week.
- We will present a final project and send paper.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/nattawat454261511-120508143441-phpapp02/85/nattawat4-54261511-1-320.jpg)
