Get actual exam material for ADVDESIGN exam. With the help of valid study dumps you can easily get prepared for your exam
Visit us: @ https://www.examarea.com/352-001-exams.html and pass 352-001 test with best grades
sales brochure targeting DSL network providers wanting a next-gen VDSL2 chipset optimized for video transport, yielding reduced bit-rate errors & fewer MPEG artifacts to improve the quality of viewer experience over DSL wireline networks
Episode 28 Remote PHY - What's All The Hype? - Today is May 12 and this is episode 28 of Get You Tech On, our show on All Things DOCSIS. I'm Brady Volpe, Founder of The Volpe Firm and Nimble This. With us is the a man who is world famous for being the Van Dam of Cable, John Downey, CMTS Technical Leader at Cisco Systems, welcome John thanks for coming back again. Today’s episode is a good one. This is Remote PHY - What’s all the HYPE?
Mostly Pros with maybe a few Cons. A quick glance at a Distributed Access Architecture (DAA) using Remote Phy and how it translates to better performance, speed and future features. Remote-PHY solution leverages existing IP technologies like Ethernet PON (EPON), Gigabit-capable Passive Optical Networks (GPON). Watch or listen to our podcast or hangout on remote PHY. https://volpefirm.com/remote-phy-what-is-hype/
sales brochure targeting DSL network providers wanting a next-gen VDSL2 chipset optimized for video transport, yielding reduced bit-rate errors & fewer MPEG artifacts to improve the quality of viewer experience over DSL wireline networks
Episode 28 Remote PHY - What's All The Hype? - Today is May 12 and this is episode 28 of Get You Tech On, our show on All Things DOCSIS. I'm Brady Volpe, Founder of The Volpe Firm and Nimble This. With us is the a man who is world famous for being the Van Dam of Cable, John Downey, CMTS Technical Leader at Cisco Systems, welcome John thanks for coming back again. Today’s episode is a good one. This is Remote PHY - What’s all the HYPE?
Mostly Pros with maybe a few Cons. A quick glance at a Distributed Access Architecture (DAA) using Remote Phy and how it translates to better performance, speed and future features. Remote-PHY solution leverages existing IP technologies like Ethernet PON (EPON), Gigabit-capable Passive Optical Networks (GPON). Watch or listen to our podcast or hangout on remote PHY. https://volpefirm.com/remote-phy-what-is-hype/
With the exhaustion of global IPv4 addresses, all operators cannot apply to the IPv4 address pool of the public network. All countries have adopted IPv6 as the direction of the next-generation Internet, and China has also clearly accelerated the strategy of building IPv6-based next-generation Internet.
Brady Volpe and John Downey go thru best practices when configuring your CMTS. For example - Cable Interface Configurations
• Power-adjust continue
• Upstream max-channel-power-offset • Upstream balance-scheduling
• SID cluster
• 4 & 2-ch upstream bonding
• US bonding partial mode
• Service flow movement
• Map-advance dynamic
With the exhaustion of global IPv4 addresses, all operators cannot apply to the IPv4 address pool of the public network. All countries have adopted IPv6 as the direction of the next-generation Internet, and China has also clearly accelerated the strategy of building IPv6-based next-generation Internet.
Brady Volpe and John Downey go thru best practices when configuring your CMTS. For example - Cable Interface Configurations
• Power-adjust continue
• Upstream max-channel-power-offset • Upstream balance-scheduling
• SID cluster
• 4 & 2-ch upstream bonding
• US bonding partial mode
• Service flow movement
• Map-advance dynamic
And first-class of all, a threat to hone your competencies. It’s adequate if you experience in over your head. We all did sooner or later, this subsequent step is about pushing thru that worry and on the point of address something as hard because the 200-301. In case you get caught, reach out. In case you see others caught, assist them.
How is this newsletter going to help you? Apart from providing you with a brief glimpse of the test’s topics and shape, we are able to additionally assist you discover efficient education substances. Cisco’s internet site is a extraordinary starting point, but you shouldn’t restriction your self to it. Despite the fact that you would possibly have by no means heard approximately them, you have to attempt exam dumps as they may grow to be your secret tool to get a passing rating in 2 hundred-301 assessment. But now, let’s start with the exam details.
Do not permit yourself face your ccna two hundred-301 exam without proper guidance to remorse later when you fail in cisco licensed community associate real exam because many people had been there. Let assist you to your cisco two hundred-301 ccna real examination preparation. To help you put together on your cisco certified network partner (ccna) 200-301 exam.
CCNP Enterprise 300-425 ENWLSD Questions and Answersdouglascarnicelli
Cisco 300-425 ENWLSD exam is a concentration test for Cisco CCNP Enterprise certification. The new cracked Cisco CCNP Enterprise 300-425 ENWLSD questions and answers are helpful in your preparation.
Are you fed up of fake Q/A and dumps for the preparation of Architecting HP Flex Network Solutions. Visit us @ here https://www.selfexamengine.com/hp-hp0-y50.htm.
We are confident in the abilities of our 200-310 Exam we want you to feel confident as well dumps available for Designing for Cisco Internetwork Solutions visit@ https://www.troytec.com/200-310-exams.html
Implementing Cisco IP Switched Networks (SWITCH 300-115) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.
H19-401_V1.0 HCSP-Presales-Campus Network Planning and Design V1.0 Exam Quest...PassquestionExamTrai
With the latest H19-401_V1.0 HCSP-Presales-Campus Network Planning and Design V1.0 Exam Questions from PassQuestion, you will have access to a wealth of valuable information covering all the essential exam topics, giving you the best possible chance of achieving a successful result.
Unlock Success with Authentic Cisco CCNA 200-301 PDF Exam Dumpseducation
In your quest to conquer the Cisco CCNA 200-301 exam, authenticity is key. Accessing genuine and reliable study materials can make all the difference in your preparation journey. With our authentic Cisco CCNA 200-301 PDF exam dumps, you gain access to comprehensive resources designed to equip you with the knowledge and confidence needed to ace the exam. Our meticulously curated materials cover the breadth and depth of CCNA topics, ensuring that you are well-prepared to tackle the challenges of the certification exam head-on. Say goodbye to uncertainty and embrace the assurance of authenticity with our Cisco CCNA 200-301 PDF exam dumps.
The ccna certification is diagnosed globally because the industry popular for community engineers. The exam covers a huge range of networking subjects, consisting of community fundamentals.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
2. QUESTION: 1
You are designing the QoS features for a large enterprise network that includes
DMVPN. When would you need to configure QoS preclassify?
A. when you are marking packets with the DSCP bits
B. when you are marking packets with the TOS bits
C. when your service provider requires the DSCP bits be set
D. when the QoS policy cannot be based on DSCP ToS bits
Answer: D
QUESTION: 2
A company wants to use SSM as the multicast routing protocol inside its network. Some
of its multicast applications do not support IGMPv3. In which two ways can the
mapping be done when these applications send IGMPv2 join messages? (Choose two.)
A. The Layer 2 switches can send a request to a DNS server.
B. The Layer 3 multicast routers can send a request to a DNS server.
C. The mapping can be done statically at the Layer 2 switches.
D. The mapping can be done statically at the Layer 3 multicast routers.
E. The Layer 2 switches can transform the IGMPv2 join to an IGMPv3lite join.
F. The Layer 3 multicast routers can transform the IGMPv2 join to an IGMPv3lite join.
Answer: B, D
QUESTION: 3
You are working on a network design plan for a company with approximately 2000
sites. The sites will be connected using the public Internet. You plan to use private IP
addressing in the network design, which will be routed without NAT through an
encrypted WAN network. Some sites will be connected to the Internet with dynamic
public IP addresses, and these addresses may change occasionally. Which VPN
solution will support these design requirements?
A. GET VPN must be used, because DMVPN does not scale to 2000 sites.
B. DMVPN must be used, because GET VPN does not scale to 2000 sites.
C. GET VPN must be used, because private IP addresses cannot be transferred with
DMVPN through the public Internet.
D. DMVPN must be used, because private IP addresses cannot be transferred with GET
VPN through the public Internet.
352-001
2
http://www.examarea.com
http://www.fravo.com
3. E. GET VPN must be used, because DMVPN does not support dynamic IP addresses for
some sites.
F. DMVPN must be used, because GET VPN does not support dynamic IP addresses for
some sites.
Answer: D
QUESTION: 4
When you design a network, when would it be required to leak routes into a Level 1
area?
A. when a multicast RP is configured in the nonbackbone area
B. when MPLS L3VPN PE devices are configured in the Level 1 areas
C. when equal cost load balancing is required between the backbone and nonbackbone
areas
D. when unequal cost load balancing is required between the backbone and
nonbackbone areas
Answer: B
QUESTION: 5
A large enterprise customer is migrating thousands of retail offices from legacy TDM
circuits to an Ethernet-based service. The network is running OSPF and has been stable
for many years. It is now possible to backhaul the circuits directly to the data centers,
bypassing the regional aggregation routers. Which two networking issues need to be
addressed to ensure stability with the new design? (Choose two.)
A. Nothing will change if the number of offices is the same.
B. Nothing will change if the number of physical interfaces stays the same.
C. The RIB will increase significantly.
D. The FIB will increase significantly.
E. The amount of LSA flooding will increase significantly.
F. The size of the link-state database will increase significantly.
Answer: E, F
QUESTION: 6
During a corporate merger, a network designer is asked for a solution that will provide
352-001
3
http://www.examarea.com
http://www.fravo.com
4. connectivity between the two enterprise networks. The solution must have the ability to
support video sessions so that the CEO can message merger activities to the employees.
The designer decides to consider multicast as a transport with MSDP to provide
redundancy. Which transport feature does the network designer need to apply to the
interconnecting firewall to ensure that Source-Active messages between the MSDP
peers can be sent in both enterprise networks?
A. unicast over a UDP connection
B. multicast over a UDP connection
C. unicast over a TCP connection
D. multicast over a TCP connection
Answer: C
QUESTION: 7
You are designing a wireless LAN with the following components:
. High-density indoor access point deployment
. 2.4-GHz and 5-GHz radios
. 802.11a, 802.11g, and 802.11n mode wireless LAN clients
Site survey results show negligible foreign WiFi and non-WiFi interference. What is the
best method to decrease duty cycle (radio frequency utilization) and increase overall
wireless LAN client performance for this design?
A. Disable all data rates below 12 Mb/s on all access points.
B. Decrease radio transmit power on all access points that report a high duty cycle.
C. Increase radio transmit power on all access points that report a high duty cycle.
D. Disable all data rates above 12 Mb/s on all access points.
E. Increase radio transmit power on all access points.
Answer: A
QUESTION: 8
In a large enterprise network with multiple data centers and thousands of access devices,
OSPF is becoming unstable due to link flapping. The current design has the access
devices multihomed to large aggregation routers at each of the data centers. How would
you redesign the network to improve stability?
352-001
4
http://www.examarea.com
http://www.fravo.com
5. A. Add a layer of regional Layer 3 aggregation devices, but leave the ABR function on
the data center aggregation routers.
B. Add a layer of regional Layer 2 aggregation devices, but leave the ABR function on
the data center aggregation routers.
C. Add a layer of regional Layer 3 aggregation devices and move the ABR function to
the regional aggregation device.
D. Add a layer of regional Layer 2 aggregation devices and move the ABR function to
the regional aggregation device.
Answer: C
QUESTION: 9
A switched network is being designed to support a manufacturing factory. Due to cost
constraints, fiber-based connectivity is not an option. Which design allows for a stable
network when there is a risk of interference from the manufacturing hardware in use on
the factory floor?
A. Design the network to include UDLD to detect unidirectional links and take them out
of service.
B. Design the network to include EtherChannel bundles to prevent a single-link failure
from taking down a switch interconnection point.
C. Design the network to include loop guard to prevent a loop in the switched network
when a link has too much interference.
D. Design the network to include BackboneFast on all devices to accelerate failure
convergence times.
Answer: A
QUESTION: 10
A metro service provider is planning Resilient Ethernet Protocol for his backbone.
Which two aspects must be considered before the network design is finalized? (Choose
two.)
A. Two Resilient Ethernet Protocol segments can be connected redundantly at two
points. One connection will be blocked, using the Spanning Tree Protocol defined in
IEEE 802.1D.
B. UniDirectional Link Detection Protocol can be enabled on Resilient Ethernet Protocol
interfaces to detect unidirectional failures.
C. The guaranteed convergence recovery time is less than 50 ms for the local segment.
D. A Resilient Ethernet Protocol segment is limited to a maximum of seven devices.
352-001
5
http://www.examarea.com
http://www.fravo.com
6. E. VLAN load balancing for optimal bandwidth usage is supported in any Resilient
Ethernet Protocol segment.
Answer: B, E
QUESTION: 11
Which three techniques can be used to improve fault isolation in an enterprise network
design? (Choose three.)
A. aggregate routing information on an OSPF ABR
B. fully meshed distribution layer
C. Equal-Cost Multipath routing
D. EIGRP query boundaries
E. multiple IS-IS flooding domains
F. tuned Spanning Tree Protocol timers
Answer: A, D, E
QUESTION: 12
Which technique can you use to detect forwarding path failures at a uniform rate, and
reconvergence times will be consistent and predictable when your routers are in the
same broadcast domain?
A. Enable BFD on your routers.
B. Configure your routers with IP-SLA to ping the peer router.
C. Configure your routers with IP-SLA and track to ping the peer and switch to a default
route if the pings fail.
D. Tune your routing protocol timers.
Answer: A
QUESTION: 13
What are two design advantages to using virtual port channel? (Choose two.)
A. enhanced system availability through multiple systems
B. reduced Spanning Tree Protocol convergence time
C. loop management without use of Spanning Tree Protocol
352-001
6
http://www.examarea.com
http://www.fravo.com
7. D. ability to use Spanning Tree Protocol blocked ports to forward traffic
E. enhanced ability to recover from Spanning Tree Protocol changes
Answer: A, C
QUESTION: 14
Refer to the exhibit.
You are designing a spanning-tree network for a small campus. Which two of these
options would result in a trouble-free spanning-tree network design? (Choose two.)
A. Convert all ports to trunk ports, prune off the VLANs that you do not require, and
minimize the number of blocking ports.
B. Introduce Layer 3 VLANs (SVIs) and prune off the VLANs that you do not require.
C. Convert all the ports to trunk and enable BackboneFast.
D. Convert all the ports to trunk and enable UplinkFast between all the links.
Answer: A, B
QUESTION: 15
A planned EBGP network will use OSPF to reach the EBGP peer addresses. Which of
352-001
7
http://www.examarea.com
http://www.fravo.com
8. these conditions should be avoided in the design that could otherwise cause the peers to
flap continuously?
A. An ACL blocks TCP port 179 in one direction.
B. IP addresses used to peer are also being sent via EBGP.
C. The OSPF area used for peering is nonbackbone (not area 0).
D. The routers are peered by using a default route sent by OSPF.
Answer: B
QUESTION: 16
ACME Corporation is integrating IPv6 into their network, which relies heavily on
multicast distribution of data. Which two IPv6 integration technologies support IPv6
multicast? (Choose two.)
A. 6VPE
B. 6PE
C. dual stack
D. ISATAP
E. 6to4
F. IPv6INIP
Answer: C, F
QUESTION: 17
You are a network designer and have been asked to consult with your server operations
team to further enhance the security of the network. The operations team provides you
with these details about the network:
. A pool of servers is accessed by numerous data centers and remote sites.
. The servers are accessed via a cluster of firewalls.
. The firewalls are configured properly and are not dropping traffic.
. The firewalls occasionally cause asymmetric routing of traffic within the server data
center.
Which technology would you recommend to enhance security by limiting traffic that
could originate from a hacker compromising a workstation and redirecting flows at the
servers?
352-001
8
http://www.examarea.com
http://www.fravo.com
9. A. Access control lists to limit sources of traffic that exits the server-facing interface of
the firewall cluster
B. Poison certain subnets by adding static routes to Null0 on the server farm core
switches.
C. Unicast Reverse Path Forwarding in strict mode
D. Unicast Reverse Path Forwarding in loose mode
Answer: D
QUESTION: 18
Which two mechanisms ensure that a network design provides fast path failure
detection? (Choose two.)
A. BFD
B. fast hello packets
C. UDLD
D. IP Cisco Express Forwarding
Answer: A, B
QUESTION: 19
You are designing an optical network. Your goal is to ensure that your design contains
the highest degree of resiliency. In which two ways will you leverage a wavelength-
switched optical network solution in your network design? (Choose two.)
A. a wavelength-switched optical network assigns routing and wavelength information
B. a wavelength-switched optical network takes linear and nonlinear optical impairment
calculation into account
C. a wavelength-switched optical network guarantees restoration based strictly on the
shortest path available
D. a wavelength-switched optical network eliminates the need for dispersion
compensating units in a network
Answer: A, B
QUESTION: 20
Refer to the exhibit.
352-001
9
http://www.examarea.com
http://www.fravo.com
10. You are designing an IPv4 unicast Layer 3 VPN load-balancing solution. Which L3VPN
feature needs to be configured on the PE routers to support the design requirement?
A. nonmatching route distinguishers
B. matching route target values
C. disable split horizon on PE2 and PE3
D. matching route distinguishers
Answer: A
352-001
10
http://www.examarea.com
http://www.fravo.com
