Komponen Sistem Pengelolaan Air Limbah Terpusat (SPAL-T)Joy Irman
Pelatihan Penyusunan Rencana Teknis Sistem Pengelolaan Air Limbah Terpusat (SPAL-T) terdiri dari beberapa modul, yaitu: Dasar-dasar Perencanaan Teknis SPAL-T, Perencanaan Teknis Unit Pelayanan, Perencanaan Teknis Unit Pengumpulan / Jaringan Perpipaan, Perencanaan Teknis Unit Pengolahan Air Limbah, Teknologi Pengolahan Lumpur, Konstruksi Bangunan, dan Rencana Anggaran Biaya. Masing-masing Modul terdiri atas beberapa sub-modul . Peserta pelatihan dapat memilih Modul/Sub-Modul sesuai dengan kebutuhannya masing-masing.
Komponen Sistem Pengelolaan Air Limbah Terpusat (SPAL-T)Joy Irman
Pelatihan Penyusunan Rencana Teknis Sistem Pengelolaan Air Limbah Terpusat (SPAL-T) terdiri dari beberapa modul, yaitu: Dasar-dasar Perencanaan Teknis SPAL-T, Perencanaan Teknis Unit Pelayanan, Perencanaan Teknis Unit Pengumpulan / Jaringan Perpipaan, Perencanaan Teknis Unit Pengolahan Air Limbah, Teknologi Pengolahan Lumpur, Konstruksi Bangunan, dan Rencana Anggaran Biaya. Masing-masing Modul terdiri atas beberapa sub-modul . Peserta pelatihan dapat memilih Modul/Sub-Modul sesuai dengan kebutuhannya masing-masing.
Perencanaan Teknis Jaringan Perpipaan Air Limbah Sistem Terpusat (SPAL-T)Joy Irman
Pelatihan Penyusunan Rencana Teknis Sistem Pengelolaan Air Limbah Terpusat (SPAL-T) terdiri dari beberapa modul, yaitu: Dasar-dasar Perencanaan Teknis SPAL-T, Perencanaan Teknis Unit Pelayanan, Perencanaan Teknis Unit Pengumpulan / Jaringan Perpipaan, Perencanaan Teknis Unit Pengolahan Air Limbah, Teknologi Pengolahan Lumpur, Konstruksi Bangunan, dan Rencana Anggaran Biaya. Masing-masing Modul terdiri atas beberapa sub-modul . Peserta pelatihan dapat memilih Modul/Sub-Modul sesuai dengan kebutuhannya masing-masing.
Master Plan dan Kajian Akademis Persampahan Provinsi DKI Jakartajoihot
Pekerjaan “Master Plan dan Kajian Akademis Persampahan Provinsi DKI Jakarta 2012
-2032” dimaksudkan untuk membantu Pemerintah Provinsi Daerah Khusus Ibukota Jakarta
khususnya Dinas Kebersihan DKI Jakarta untuk melanjutkan pelaksanaan pengelolaan
persampahan yang berwawasan lingkungan dan berkelanjutan
Permen PU Nomor 3 Tahun 2013 tentang Penyelenggaraan Prasarana Dan Sarana Per...Penataan Ruang
Permen PU Nomor 3 Tahun 2013 tentang Penyelenggaraan Prasarana Dan Sarana Persampahan Dalam Penanganan Sampah Rumah Tangga Dan Sampah Sejenis Sampah Rumah Tangga - Lampiran 3
Jaringan Transmisi - Sistem Jaringan Perpipaan Yahya M Aji
Fungsi jaringan transmisi adalah menyalurkan air bersih dari IPA (Instalasi Pengolahan Air) ke ground tank/reservoir.
Ada 3 jenis system transmisi, yaitu :
Sistem gravitasi
Memanfaatkan energy potensial akibat perbedaan elevasi sumber air dengan reservoir. Artinya, perbedaan tinggi yang dimiliki saja sudah cukup untuk mengalirkan air dari sumber air ke reservoir.
Sistem pompa
Digunakan apabila energy akibat beda elevasi tidak cukup untuk mengalirkan air ke tujuan, sehingga diperlukan daya tambahan.
Sistem gabungan
Gabungan dari kedua system diatas, yaitu penggunaan system gravitasi dan system pompa secara bersama-sama.
food waste disposal is an important operation in food manufacturing industries for sanitation. Effluent treatment plants are used in industries for the waste water treatment.
Perencanaan Teknis Jaringan Perpipaan Air Limbah Sistem Terpusat (SPAL-T)Joy Irman
Pelatihan Penyusunan Rencana Teknis Sistem Pengelolaan Air Limbah Terpusat (SPAL-T) terdiri dari beberapa modul, yaitu: Dasar-dasar Perencanaan Teknis SPAL-T, Perencanaan Teknis Unit Pelayanan, Perencanaan Teknis Unit Pengumpulan / Jaringan Perpipaan, Perencanaan Teknis Unit Pengolahan Air Limbah, Teknologi Pengolahan Lumpur, Konstruksi Bangunan, dan Rencana Anggaran Biaya. Masing-masing Modul terdiri atas beberapa sub-modul . Peserta pelatihan dapat memilih Modul/Sub-Modul sesuai dengan kebutuhannya masing-masing.
Master Plan dan Kajian Akademis Persampahan Provinsi DKI Jakartajoihot
Pekerjaan “Master Plan dan Kajian Akademis Persampahan Provinsi DKI Jakarta 2012
-2032” dimaksudkan untuk membantu Pemerintah Provinsi Daerah Khusus Ibukota Jakarta
khususnya Dinas Kebersihan DKI Jakarta untuk melanjutkan pelaksanaan pengelolaan
persampahan yang berwawasan lingkungan dan berkelanjutan
Permen PU Nomor 3 Tahun 2013 tentang Penyelenggaraan Prasarana Dan Sarana Per...Penataan Ruang
Permen PU Nomor 3 Tahun 2013 tentang Penyelenggaraan Prasarana Dan Sarana Persampahan Dalam Penanganan Sampah Rumah Tangga Dan Sampah Sejenis Sampah Rumah Tangga - Lampiran 3
Jaringan Transmisi - Sistem Jaringan Perpipaan Yahya M Aji
Fungsi jaringan transmisi adalah menyalurkan air bersih dari IPA (Instalasi Pengolahan Air) ke ground tank/reservoir.
Ada 3 jenis system transmisi, yaitu :
Sistem gravitasi
Memanfaatkan energy potensial akibat perbedaan elevasi sumber air dengan reservoir. Artinya, perbedaan tinggi yang dimiliki saja sudah cukup untuk mengalirkan air dari sumber air ke reservoir.
Sistem pompa
Digunakan apabila energy akibat beda elevasi tidak cukup untuk mengalirkan air ke tujuan, sehingga diperlukan daya tambahan.
Sistem gabungan
Gabungan dari kedua system diatas, yaitu penggunaan system gravitasi dan system pompa secara bersama-sama.
food waste disposal is an important operation in food manufacturing industries for sanitation. Effluent treatment plants are used in industries for the waste water treatment.
Utilization of Agro-industrial waste and by products.pptxRehanaRamzan3
most benefitnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnmmmmmmikkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkjjjjjjjjj
Fruits and vegetables are important sources of vitamins, minerals and dietary fibre. The consumption of fruits and vegetables has increased significantly as consumers have become more health-conscious. Whilst most fruit and vegetables should be eaten fresh, processed fruit and vegetables can be acceptable alternatives.
The major contents of the book are procedures for fruit and vegetable preservation, chemical preservation of foods, food preservation by fermentation, preservation by drying, canning fruits, syrups and brines for canning, fruit beverages, fermented beverages, jams, jellies and marmalades, tomato products, chutneys, sauces and pickles, vegetables preparation for processing, vegetable juices, sauces and soups, vegetable dehydration, freezing of vegetables etc. The book also contains photographs of Production Line & Machinery.
Tags
Modern Technology on Food Preservation, Book on Food Preservation, Business plan of dehydration vegetable, Food Freezing, Food Preservation Business in India, Fruits and vegetables preservation business India, Food preservation business plan, Food Preservation by Canning, Food Preservation by drying, Food Preservation by Fermentation and Pickling, Food Preservation by Smoking Process, Food Preservation Using Ozone, Food Preservation How to Dehydrate Fruits and Vegetables, Food Preservatives, Food Processing Industry Opportunities in India, Food Technology book, Freezing food preservation, Freezing of fruits and vegetables, How to start a food preservation business, How to start a Fruits and vegetables preservation business, How to start a food processing unit in India, How to Start Food Processing Business, Methods and Techniques of Fruits and vegetables Preservation, Preservation and Processing of Fruits and Vegetables, Preservation of Bakery Products, Preservation of Food as Sugar Concentrates, Preservation of Fruits and vegetables, Starting a Food Preservation Business, Starting Your Own Preserved Foods Business, Storage Stability of Preserved Foods, Thermal Food Preservation, Thermal processing food preservation, Using Dehydration to Preserve Food, Using Dehydration to Preserve Fruits and Vegetables, Most Profitable Food Processing industry, Agro Based Business Ideas for Startup, How to Start Food Processing Industry in India, Food Processing Industry in India, Most Profitable Food Processing Business Ideas, Food Processing & Agro Based Profitable Projects, Food Processing Projects, Small Scale Food Processing business, Starting a Food or Beverage Processing Business, How to Start a Food Production Business, Agro Based Small Scale Industries, Food processing industries, new small scale ideas in Food processing industry, Setting up of Food Processing Units, how to start a food manufacturing business, Dehydration of Fruits and Vegetables, Canning of Fruits and Vegetables
New advances in the integrated management of food processing waste
in India and Europe: use of sustainable technologies for the exploitation of by-products into new foods and feeds
Similar to 32129 25 pollutionfromfoodprocessing.7 (20)
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Key Trends Shaping the Future of Infrastructure.pdf
32129 25 pollutionfromfoodprocessing.7
1. 25) POLLUTION FROM FOOD PROCESSING FACTORIES AND
ENVIRONMENTAL PROTECTION
The food industry is now facing increasing pressure to ensure that their company's activities
are environmentally sensitive, but there is also increased internal pressure to maintain or
increase profitability in the face of fierce competition. The food-processing industry has
special concerns about the health and safety of the consumer.
Key resources used by the food-processing industry include the water, raw materials and
energy. Traditionally, the food-processing industry has been a large water user. Water is used
as an ingredient, an initial and intermediate cleaning source, an efficient transportation
conveyor of raw materials, and the principal agent used in sanitizing plant machinery and
areas. Although water use will always be a part of the food-processing industry, it has become
the principal target for pollution prevention, source reduction practices.
The key environmental issues for the food industry include the following:
Wastewater. Primary issues of concern are biochemical oxygen demand (BOD); total
suspended solids (TSS); excessive nutrient loading, namely nitrogen and phosphorus
compounds; pathogenic organisms, which are a result of animal processing; and residual
chlorine and pesticide levels.
Solid Waste. Primary issues of concern include both organic and packaging waste. Organic
waste, that is, the rinds, seeds, skin, and bones from raw materials, results from processing
operations. Inorganic wastes typically include excessive packaging items that are, plastic,
glass, and metal. Organic wastes are finding ever-increasing markets for resale, and
companies are slowly switching to more biodegradable and recyclable products for
packaging. Excessive packaging has been reduced and recyclable products such as aluminum,
glass, and high-density polyethylene (HDPE) are being used where applicable.
The food processing factories should follow the major technological innovations in the
industry, including those in clean technologies and processes. Clean technologies include:
A. Advanced Wastewater Treatment Practices. Use of wastewater technologies
beyond conventional secondary treatment.
B. Improved Packaging. Use of less excessive and more environmentally friendly
packaging products.
C. Improved Sensors and Process Control. Use of advanced techniques to control
specific portions of the manufacturing process to reduce wastes and increase
productivity.
D. Food Irradiation. Use of radiation to kill pathogenic microorganisms.
E. Water and Wastewater Reduction (Closed Loop/Zero Emission Systems).
Reduction or total elimination of effluent from the manufacturing process
POLLUTION FROM FOOD PROCESSING
Food processing can be divided into four major sectors including fruit and vegetables;
meat, poultry, and seafood; beverage and bottling; and dairy operations. All of these sectors
consume huge amount of water for processing food. A considerable part of these waters are
potential wastewaters to be treated for safe disposal to the environment. Table 1shows
CHAPTER 26 – PAGE 1/11
2. typical rates of water use for various food-processing sectors. An abundant and inexpensive
source of water is a requirement for success in the food-processing industry. This coincides
with the same need for water resources in agricultural farmland activities.
Table 1. Typical Rates for Water Use for Various Industries
Industry Range of Flow gal/ton product
Fruits and Vegetables
Green beans 12,000-17,000
Peaches and pears 3,600-4,800
Other fruits and vegetables 960-8,400
Food and Beverage
Beer 2,400-3,840
Bread 480-960
Meat packing 3,600-4,800
Milk products 2,400-4,800
Whiskey 14,400-19,200
Fruit and Vegetable Food-Processing Sector
The primary steps in processing fruits and vegetables include:
1. General cleaning and dirt removal
2. Removal of leaves, skin, and seeds
3. Blanching
4. Washing and cooling
5. Packaging
6. Cleanup
Wastewater and solid wastes are the primary area of pollution control within the fruit and
vegetable food-processing industry. Their wastewater is high in suspended solids, and
organic sugars and starches and may contain residual pesticides. Solid wastes include
organic materials from mechanical preparation processes that is, rinds, seeds, and skins
from raw materials. For the most part, solid waste that is not resold as animal feed is
handled by conventional biological treatment or composting. The total amount of material
generated is a function of the amount of raw material moved through a facility, for
example, for a given weight of apples processed comes a set amount of peel and seed
waste.
Attempts to decrease solid waste streams have not been an area of great development for
pollution prevention opportunities and clean technologies. Pre-treatment opportunities
intended to reduce the amount of raw materials lost to the waste stream have been an area
of clean technology development. For the most part, the majority of clean technology
CHAPTER 26 – PAGE 2/11
3. advances and research have been in reducing the volume of wastewater generated in food-
processing operations.
Most fruit and vegetable processors use traditional biological means to treat their
wastewater. Advancements in the degradation chemistries of pesticides have aided in
reducing their quantities and toxicity in process wastewater.
Washing fresh produce (also known as surface treatment) can reduce the overall potential
for microbial food safety hazards. This is an important step since most microbial
contamination is on the surface of fruits and vegetables. If pathogens are not removed,
inactivated, or otherwise controlled, they can spread to surrounding produce, potentially
contaminating a significant proportion of the produce
Sanitizers or anti-microbials in wash water and other processing water may be useful in
reducing pathogens on the surface of produce and/or reducing pathogen build-up in water.
The effectiveness of a sanitizer depends on its chemical and physical nature, treatment
conditions (such as water temperature, pH, and contact time), resistance of pathogens, and
the nature of the fruit or vegetable surface. Chlorine is a commonly used anti-microbial.
Chlorine dioxide, trisodium phosphate, organic acids, and ozone have also been studied for
use as anti-microbials in produce wash water. All chemical substances that contact food
must be used in accordance with FDA and EPA regulations.
Meat, Poultry, and Seafood Sector
The primary steps in processing livestock include:
1. Rendering and bleeding
2. Scalding and/or skin removal
3. Internal organ evisceration
4. Washing, chilling, and cooling
5. Packaging
6. Cleanup
Meat, poultry, and seafood facilities offer a more difficult waste stream to treat. The killing
and rendering processes create blood by-products and waste streams, which are extremely
high in BOD. These facilities are very prone to disease spread by pathogenic organisms
carried and transmitted by livestock, poultry, and seafood. This segment of the food-
processing industry is by far the most regulated and monitored.
Waste streams vary per facility, but they can be generalized into the following: process
wastewaters; carcasses and skeleton waste; rejected or unsatisfactory animals; fats, oils, and
greases (FOG); animal feces; blood; and eviscerated organs. The primary avenue for
removal of solid waste has been its use in animal feed, cosmetics, and fertilizers. These
solid wastes are high in protein and nitrogen content. They are excellent sources for
recycled fish feed and pet food. Skeleton remains from meat processing are converted into
bonemeal, which is an excellent source of phosphorus for fertilizers. FOG waste (typically
from industrial fisheries) is used as a base raw material in the cosmetics industry.
CHAPTER 26 – PAGE 3/11
4. Beverage and Fermentation Sector
The primary steps in processing beverages are
1. Raw material handling and processing
2. Mixing, fermentation, and/or cooking
3. Cooling
4. Bottling and packaging
5. Cleanup
Wastewater and solid waste are the primary waste streams for the beverage and
fermentation sector. Solid wastes result from spent grains and materials used in the
fermentation process. Wastewater volume of "soft drink processes" is lower than in other
food-processing sectors, but fermentation processes are higher in BOD and overall
wastewater volume compared to other food-processing sectors.
Ozone technology has proven very useful in the beverage market since the earliest 20th
century. In bottled water plants, ozone can be used to disinfect product water without
leaving any residual taste or odor. At beverage plants, ozone can reduce or eliminate the
need for chemical or high temperature disinfections during clean-in-place (CIP) cycles,
reducing downtime and chemical costs.
Dairy Sector
A majority of the waste milk in dairy wastewaters comes from start-up and shutdown
operations performed in the high-temperature, short time (HTST) pasteurization process.
This waste is pure milk raw material mixed with water. Another waste stream of the dairy
sector is from equipment and tank-cleaning wastewaters. These waste streams contain
waste milk and sanitary cleaners and are one of the principal waste constituents of dairy
wastewater. Over time, milk waste degrades to form corrosive lactic and formic acids.
Approximately 90% of a dairy’s wastewater load is milk.
Can Cooker Products
Water plays a role in most of the problems associated with metal food containers after
processing. Whether steam, hot water or cold water, each can serve as the vehicle to
transport undesirable substances. It is important to understand, when designing an effective,
comprehensive water treatment program, how these mechanisms chemically interact.
Wastewater from Food Processing Factories
Food-processing wastewater can be characterized as nontoxic, because it contains few
hazardous and persistent compounds. With the exception of some toxic cleaning products,
wastewater from food-processing facilities is organic and can be treated by conventional
biological technologies. Part of the problem with the food-processing industry’s use and
discharge of large amounts of water is that it is located in rural areas in which the water
treatment systems (i.e., potable and wastewater systems) are designed to serve small
populations. As a result, one medium-sized plant can have a major effect on local water
CHAPTER 26 – PAGE 4/11
5. supply and surface water quality. Large food-processing plants will typically use more than
1,000,000 gallons of potable water per day.
Publicly owned treatment works (POTW) that receive food-processing wastewater with
BOD5 values greater than 250 to 300 mg/L typically will add an additional surcharge for
treatment. Any company is subject to fines by environmental enforcement agency when
they discharge to a receiving water treatment works and exceeding their permitted BOD5
discharge level. Due to increased enforcement of discharge regulations and escalating
POTW surcharges, many food-processing facilities are taking steps to either reduce, recycle
(or renovate), and/or treat their wastewaters before they discharge them.
Another contaminant of food-processing wastewaters, particularly from meat-, poultry-,
and seafood-processing facilities, is pathogenic organisms. Wastewaters with high
pathogenic levels must be disinfected prior to discharge. Typically, chlorine (free or
combined) is used to disinfect these wastewaters. Ozone, ultraviolet (UV) radiation, and
other nontraditional disinfection processes are gaining acceptance due to stricter regulations
on the amount of residual chlorine levels in discharged wastewaters.
The pH of a wastewater is of paramount importance to a receiving stream and POTW.
Biological micro organisms, used in wastewater treatment, are sensitive to extreme
fluctuations in pH. Companies that are found to be the responsible polluter are fined and/or
ordered to shut down operations until their pH level meets acceptable values. Wastewater
discharge values that range from 5 to 9 on the pH logarithmic scale are usually acceptable.
Low pH values are more damaging to a receiving stream and POTW biological treatment
process.
The food-processing industry utilizes water to meet its individual day -to-day needs. Fifty
percent of the water used in the fruit and vegeta ble sector is for washing and rinsing. Water
is the primary ingredient in products for the beverage and fermentation sector, and dairies
utilize water as the standard cleaning agent for process machinery.
Defining Load Using BOD 5 and COD
Chemical oxygen demand (COD) and biochemical oxygen demand (BOD5) are common
measurements used to determine water quality. They measure the strength of the waste
stream by measuring the oxygen required to stabilize the wastes. The five-day biochemical
oxygen demand (BOD5) value is used as a gauge to measure the level of treatment needed
to discharge a wastewater safely to a receiving water treatment center. The BOD for all
food-processing wastewater is relatively high compared to other industries. A high BOD
level indicates that a wastewater contains elevated amounts of organic material, dissolved
and/or suspended solids, minerals, nitrogen and phosphorus.
COD and BOD 5 are important to the food processing industry because they can be used to
indicate lost product and wasteful practices. High BOD 5 and COD levels indicate increased
amounts of product lost to the waste stream. Measurements at various process locations can
help locate sources of waste.
CHAPTER 26 – PAGE 5/11
6. Relating COD to BOD 5
At any point in a particular food processing operation, the relationship between BOD5 and
COD is fairly consistent. However, the ratio's of these two measures varies widely with the
type of product (Table2).
Table 2. Typical Values of BOD 5 and COD for Different Food Plant Wastewater
BOD5
Type of Processor COD (mg/l) BOD5/COD
(mg/l)
Bakery products 3,200 7,000 0.46
Dairy processing 2,700 4,700 0.57
Jams and jellies 2,400 4,000 0.60
Meat packing 1,433 2,746 0.52
Meat specialties 530 900 0.59
Poultry processor 1,306 1,581 0.83
ENVIRONMENTAL PROTECTION
SOURCE REDUCTION
The most effective method of environmental protection and reducing your disposal costs is to
decrease the volume of waste material and by-products generated in the production process. If
less waste is generated, then less material needs to be disposed of. Source reduction should be
the most logical starting point for reducing disposal costs since your company is in business
to produce a saleable product, not waste materials or by-products.
Examples of source reduction include:
A. Use brooms and scrapers to clean floors and equipment while they are dry before
washing them down with water.
B. Use high-pressure spray washes during cleanup to conserve water.
C. Dedicate mixing lines to certain products to reduce changeover cleanups.
D. Minimize spills and leaks on the production line to prevent raw materials from
becoming wastes.
MANAGEMENT ALTERNATIVES
If source reduction is not a viable solution, management alternatives exist, including:
A. Using the food by-product as an animal feed.
B. Composting or land spreading the food by-product.
1. Animal Feed
Feeding food by-products directly to livestock allows for former wastes to be useful again. In
addition, the quantity of liquid and solid waste is reduced when by-products are fed to
livestock rather than being disposed of in landfills or wastewater treatment plants.
CHAPTER 26 – PAGE 6/11
7. 2. Composting and Land spreading
When it is impractical to feed by-products to livestock, both composting and land spreading
the food waste are viable alternatives. Both methods degrade food by-products into a useful
soil additive called "humus." Composting degrades by-products above ground in a
concentrated area, while land spreading degrades by-products beneath the soil in a cultivated
field.
Composting. With proper management, food by-products can be kept out of the landfill and
instead be composted and added to the soil at appropriate rates. Composting has the following
benefits:
1. Low transportation costs. The by-products can be composted on site, and the resulting
humus can have a volume and weight reduction of up to 40 percent.
2. Low capital investment. Composting is a batch process that can be done by using
either a mound or a windrow system. In both systems all the by-products are managed
to accelerate biological breakdown.
3. Good for seasonal processors. For a company (such as a cannery) that only processes
food for several months a year, composting may be a suitable alternative to animal
feeding or land filling. Livestock producers may be unwilling to switch to a livestock
feed that is only available for a short period.
4. Long shelf life. Humus can be stored without spoiling and applied to enrich the soil as
needed.
Land spreading. If your company has sufficient land, it is possible to incorporate food by-
products directly into the soil on site . A farmer can be paid to take the by-products to a
suitable field. Again, with proper management, food is kept out of the landfill and is used to
enhance the soil. Land spreading has the following benefits:
1. A separate compost facility is not necessary.
2. The finished product does not have to be stored.
3. The finished product does not have to be transported. It is left in the soil as a plant
nutrient.
CLEAN TECHNOLOGY DEVELOPMENTS
Because wastewater generation is the industry’s biggest area of concern, the following clean
technologies focus on source reduction, recycling, reuse, and treatment of wastewater.
Clean technologies are defined as "manufacturing processes or product technologies that
reduce pollution or waste, energy use, or material use in comparison to the technologies
that they replace." The food-processing industry has special concerns about the health and
safety of the consumer. It should be noted that some of the technologies outlined in the report
target both human health and environmental pollution issues.
Common source reduction methods employed at most plants include improving good
housekeeping practices, making process modifications, substituting more environmentally
friendly raw materials, and segregating waste streams. Some simple co st-effective means of
achieving source reduction include installing automatic shut-off valves, using low -flow or air-
CHAPTER 26 – PAGE 7/11
8. injected faucets/spray cleaners, switching from chemical caustic peeling processes to
mechanical peeling, and converting from water to mechanical conveyance of raw materials
through a production line.
Advanced Wastewater Treatment Practices
Description.
Advanced wastewater treatment is defined as any treatment beyond secondary (or biological)
treatment. These treatment practices are employed to target specific discharge constituents
that are of concern. Typically, pathogens, suspended solids, dissolved solids, nitrogen, and
phosphorus are removed in advanced wastewater treatment. The following is a listing of some
technologies being used in advanced wastewater treatment.
A. Membrane applications
B. Disinfection
C. Charge separation
D. Other separation practices.
Membrane applications focus on separating water from contaminants, using semi permeable
membranes and applied pressure differentials. In generic terms, they work like window
screens that let air but not insects and other larger objects pass through. The smaller the screen
holes, the smaller the objects need to be to pass through. Pressure is applied to reverse the
natural equilibrium between the clean water and wastewater. The basic principle of natural
equilibrium is that the clean water tends to migrate to the wastewater side to equalize the
concentrations across the membrane. Mechanical pressure is used to force water molecules
from the wastewater side to the clean water side and, thus, a "high-tech" filtration of the
wastewater occurs. In the past, the energy needed to apply the pressure and the fragility of the
membrane surface made use of these alternatives economically unjustifiable.
There are varying degrees of membrane filtration. Microfiltration, ultrafiltration (UF), and
reverse osmosis (RO) are the current membrane systems used commercially. The filtering
capabilities of each (i.e., ability to filter based on contaminant particle size) decrease
respectively. Microfiltration is only recommended for removing particles from 0.05 to 2
microns in size, UF is used for particles and suspended solids from 0.005-0.1 microns, and
RO is used for particles, suspended solids, and dissolved solids in the Angstrom range (e.g.,
molecular weight above 200).
Problems with membrane applications include befouling of the membrane and fragility of the
membrane surface. Toxic synthetic compounds can oxidize the surface of the membrane, thus,
destroying it. New innovations in membrane technology have advanced the "cleanability" and
reuse of membranes. The use of stainless steel and ceramic materials for membranes has
greatly improved their use in advanced wastewater treatment.
Sanitary conditions have always been a concern for food products created in the
manufacturing process.
In recent years, they have also become a requirement of wastewater effluent. As for water
treatment practices, disinfection through chlorination has been the quickest means of
disinfecting wastewater. Disinfection has come under criticism due to chlorination byproducts
and toxicity concerns that residual chlorine pose to aquatic life. The two principal means of
CHAPTER 26 – PAGE 8/11
9. disinfecting wastewater without using chlorination are ozone disinfection or UV disinfection.
Ozonation works on the same principle as chlorination but leaves no residual in the treated
wastewater and does not produce the magnitude of disinfection byproducts that chlorination
produces. UV disinfection is even more environmentally friendly than ozone but requires
more space and cleaner wastewater to be effective. Both technologies require high capital and
operating costs.
Charge separation involves separating uncharged water molecules and charged
contaminants, such as nitrogen compounds, and phosphates (i.e., NH 4+, NO2-, NO3-, and PO4-
3
). Electro-coagulation is starting to be an economical way of removing charged particles
from wastewater, utilizing charge separation. Ion exchange is widely used to filter wastewater
through cationic and anionic resins to remove the wastewater’s charged ions of concern. Ion
exchange replaces the waste particles with a donor ion from the resin. The resins eventually
reach a capacity at which all the ions have been replaced or exchanged. The resin
manufacturer typically recycles spent resin. Problems with using ion exchange are that it
requires monitoring for breakthrough contamination and pH fluctuations can greatly affect the
removal rates of specific ions (e.g., a pH greater than 9.3 makes ammonium removal
inefficient). Also, resins remove ions selectively, meaning the greater the charge differential
from neutrality, the greater the exchange attraction between the resin and the charged
contaminant (e.g., Ca+2 will be removed before NH4+).
Othe r separation practices include using centrifugal and gravity mechanisms to separate and
remove contaminants from a wastewater. Air flotation systems use diffused pumped air to lift
suspended solids and FOG wastes to the surface of a wastewater for removal. Skimmers and
mechanical devices are then employed to separate waste from the surface. Problems with
using either of these methods include capital costs to modify current treatment processes, and
increased operational energy costs.
With the exception of centrifugal and gravity separation, all these advanced treatments require
a wastewater influent that is low in turbidity.
Benefits. Studies have shown that membrane applications can be less energy intensive than
evaporation and distillation operations and take up less space. The technology gives better
control of the process effluent. Unlike chemical precipitation, membrane technology does not
produce a sludge disposal problem, but it does produce a concentrated brine solution.
The main benefit of disinfecting wastewater is that it improves and protects water quality of
and aquatic life in the receiving water. Similar to membrane applications, ion exchange does
not produce a chemical sludge and, like disinfection, it protects the water quality of receiving
water and decreases the nutrient-loading problems that cause eutrophication in receiving
waters.
Electro-coagulation is beginning to receive attention as a treatment option and is expected to
increase in use in the food-processing industry.
Centrifugal and gravity separation processes are placed before any of the preceding advanced
operations. This ensures that a cleaner, less turbid wastewater reaches these advanced
operations. As stated earlier, the recovered FOG is a resalable byproduct. Use of any of these
advanced processes improves the final wastewater effluent quality and also increases the
likelihood of recycling renovated process water.
CHAPTER 26 – PAGE 9/11
10. Water and Wastewater Reduction (Closed Loop/Zero Emission Systems)
Description. An increasingly viable option for companies is the "zero-discharge" system.
Many food-processing facilities are looking to pretreatment options that can help reduce the
amount of lost product. Once a part of the food product is lost to a waste stream, it represents
a decrease in product utilization and an increase in treatment costs. A large capital
expenditure and a customized treatment solution are required to handle a zero-discharge
option. Furthermore, the uniqueness of the various food-processing operations makes it
impossible to find "off-the-shelf" treatment designs to fit a user’s needs.
A more plausible approach is that of achieving zero emissions. As noted earlier, the "zero
emissions" strategy relies on a network of companies utilizing each other’s waste streams.
The strategy is a more economically efficient system than a "closed loop" because the waste
products do not have to be fully treated. Although facilities are moving toward decreased
effluent quantities, material mass balances still dictate that process residuals such as sludge
will require management and possibly off-site disposal. Both zero discharge and zero
emission systems achieve better effluent water quality and have fewer negative impacts on the
environment.
FUTURE TRENDS
Regulations and Standards
International standards developed by the Geneva -based International Organization of
Standardization, called ISO 14000, represent the latest attempts to provide a global
environmental management system. ISO 14000 was intended to help organizations manage
and evaluate the environmental aspects of their operations without being prescriptive. The
International Organization of Standardization intends to provide companies with a framework
to comply with both domestic and foreign environmental regulations. ISO 14000 contains
sections calling for implementation of pollution prevention programs, and many U.S.
companies are evaluating the pros and cons of becoming fully certified in ISO 14001.
Furthermore, EPA is talking about easing reporting requirements for U.S. companies that earn
ISO 14001 certification.
Industry Trends
There are several ongoing trends and research and development activities apparent within the
food-processing community in the areas of pollution prevention and clean technology
implementation.
Solid Waste Reduction. Companies will continue to look at ways to reduce solid waste
generation, use less or reusable packaging, and use biodegradable packing products.
Excessive packaging has been reduced and recyclable products such as aluminum, glass, and
HDPE are expected to continue being used to a wider degree in packaging situations.
Mechanical Versus Chemical Processing. Companies will show increased consideration for
using mechanical methods for food processing (e.g., the fruit and vegetable sector).
Mechanical processing can be used to perform many of the same functions as chemical
CHAPTER 26 – PAGE 10/11
11. processing. The costs and benefits of using mechanical versus chemical processing will be
further quantified to aid in decision making.
Pretreatment Options, Water Conservation, and Wastewater Reduction. Pretreatment
opportunities and water conservation will continue to be principal targets for pollution
prevention source reduction practices in the food-processing industry. Pretreatment options
look to minimize the loss of raw materials to the food-processing waste streams. Water used
in conveying materials, facility cleanup, or other non-ingredient uses will be reduced, which
in turn will reduce the wastewater volume from food-processing facilities. Wastewater
treatment will continue to be the pollution prevention treatment focus for food-processing
companies. The industry will continue to implement advanced innovative techniques to lessen
the environmental impact of food processing discharge wastewaters.
CHAPTER 26 – PAGE 11/11