This document summarizes a contractor blast machine that is portable, rated for 150 PSI, and holds 2 cubic feet of blast media. It has pneumatic remote controls and a manual metering valve. The blast machine removes corrosion, mill scale, and coatings from surfaces and creates a surface profile for coatings. It requires a compressed air source, respirator, and blast media to operate.
This document summarizes the technical specifications of a 4 cubic foot portable blast machine. The blast machine is rated for 150 PSI working pressure, holds 4 cubic feet of blast media, and comes equipped with pneumatic remote controls and a manual metering valve. It is a high-performance blast cleaning system that can remove corrosion, mill scale, and coatings from surfaces. Related safety equipment and accessories are also listed.
This document summarizes a 6 cubic foot portable blast machine. It is rated for 150 PSI and equipped with pneumatic remote controls and a manual metering valve. The blast machine can hold 6 cubic feet of blast media for up to 30 minutes of continuous blasting at 100 PSI. It is intended to remove corrosion, mill scale, and coatings from surfaces and produces a uniform surface texture. Safety equipment like a respirator and training are required for operation.
The document discusses various products from LINC including their T-series timer, 94P-12 high pressure metering pump, filters, check valves, and complete chemical injection systems. It provides details on the features and benefits of these products such as corrosion resistant materials, self-draining designs, expanded air supply volume, and ability to handle high pressures and a wide range of flow rates. The document also provides an example of how to order a 94P pump and specifications for the 1/4" and 1/2" models.
This document provides information on Clemco abrasive blasting machines and accessories. It summarizes various Clemco blast machine models ranging from 1/2 cubic foot to 20 cubic foot capacities that are suitable for different industrial applications. It also describes the different types of abrasive metering valves and remote control systems that Clemco offers to precisely control abrasive flow and provide safe, remote operation of the blast machines.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
The document summarizes Cash Valve K Series back pressure valves. It describes 4 models - Types K-5, K-5C, K-10, and K-15 - which are high capacity angle bypass regulators or back pressure control valves suitable for pressures up to 1500 PSIG. The models vary in size, material composition, pressure and temperature ranges, and applications. Type K-5 valves control pressures from 5-150 PSIG for systems up to 300°F. Type K-10 valves control pressures from 15-600 PSIG up to 450°F and are well-suited for hydraulic systems. Type K-15 valves control higher pressures from 25-1500 PSIG up to 450°F and are designed
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
The document provides guidelines for erecting headers in boiler pressure parts. It describes preparing the supporting structures by checking dimensions according to structural drawings and pressure parts drawings. Headers must be erected at proper locations and orientations indicated by mark numbers on drawings and components. Temporary attachments used for erection must be removed after completion. Clearance between headers and supports must be checked to allow for thermal expansion.
This document summarizes the technical specifications of a 4 cubic foot portable blast machine. The blast machine is rated for 150 PSI working pressure, holds 4 cubic feet of blast media, and comes equipped with pneumatic remote controls and a manual metering valve. It is a high-performance blast cleaning system that can remove corrosion, mill scale, and coatings from surfaces. Related safety equipment and accessories are also listed.
This document summarizes a 6 cubic foot portable blast machine. It is rated for 150 PSI and equipped with pneumatic remote controls and a manual metering valve. The blast machine can hold 6 cubic feet of blast media for up to 30 minutes of continuous blasting at 100 PSI. It is intended to remove corrosion, mill scale, and coatings from surfaces and produces a uniform surface texture. Safety equipment like a respirator and training are required for operation.
The document discusses various products from LINC including their T-series timer, 94P-12 high pressure metering pump, filters, check valves, and complete chemical injection systems. It provides details on the features and benefits of these products such as corrosion resistant materials, self-draining designs, expanded air supply volume, and ability to handle high pressures and a wide range of flow rates. The document also provides an example of how to order a 94P pump and specifications for the 1/4" and 1/2" models.
This document provides information on Clemco abrasive blasting machines and accessories. It summarizes various Clemco blast machine models ranging from 1/2 cubic foot to 20 cubic foot capacities that are suitable for different industrial applications. It also describes the different types of abrasive metering valves and remote control systems that Clemco offers to precisely control abrasive flow and provide safe, remote operation of the blast machines.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
The document summarizes Cash Valve K Series back pressure valves. It describes 4 models - Types K-5, K-5C, K-10, and K-15 - which are high capacity angle bypass regulators or back pressure control valves suitable for pressures up to 1500 PSIG. The models vary in size, material composition, pressure and temperature ranges, and applications. Type K-5 valves control pressures from 5-150 PSIG for systems up to 300°F. Type K-10 valves control pressures from 15-600 PSIG up to 450°F and are well-suited for hydraulic systems. Type K-15 valves control higher pressures from 25-1500 PSIG up to 450°F and are designed
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
The document provides guidelines for erecting headers in boiler pressure parts. It describes preparing the supporting structures by checking dimensions according to structural drawings and pressure parts drawings. Headers must be erected at proper locations and orientations indicated by mark numbers on drawings and components. Temporary attachments used for erection must be removed after completion. Clearance between headers and supports must be checked to allow for thermal expansion.
Manufacturing and Exporting a comprehensive range of process instruments and valves such as Safety Valve, Safety Relief Valve, Bar Stock Valve, IBR Safety Valve, Tubular Level Gauge, Reflex Level Gauge, Transparent Level Gauge, Auto Shut Off Cock..
The document provides technical specifications for erecting a 500 MW steam turbine from KWU design, including:
- It is a three cylinder reheat condensing turbine with a single flow HP turbine, double flow IP turbine, and double flow LP turbine.
- It has main stop and control valves, reheat stop and control valves, and extraction swing check valves.
- The rated speed is 50.0 revolutions per second and the maximum under valve wide open condition is 524.2 MW.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
From its beginnings in 1966, Kammer valves have been engineered and manufactured for specific answers to tough applications. Although, more than half of all Kammer valves are custom designed, custom applications often do not require additional time or cost due to the versatility and interchangeability of the Kammer design.
Tuning forks, with their stable resonant frequency, have been applied in numerous ways throughout many years. A modern application in industrial process control is the vibrating tuning fork level switch.The Jerguson Series 200 is a single point level switch which may be installed in any position in a pipe or vessel to detect the presence of a liquid.
The Series 200 employs a tuning fork style probe which vibrates at its natural frequency when in air. A piezoelectric crystal-system
is used to create a 1100 Hz vibration in the tuning fork. As the
tuning fork is covered by a liquid or slurry, a corresponding
shift occurs in the vibrating frequency of the tuning fork. This
shift is being monitored continuously and once a present threshold is exceeded, the output changes status.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
The document provides instructions for erecting pressure parts for a conventional 250 MW boiler. It outlines the sequence and key steps, which include erecting 3850 MT of boiler structure first, lifting the boiler drum using strand jacks, then erecting the furnace and second pass from top to bottom. Seal welding and insulation are also covered. The overall goal is to assemble the 5600 MT of pressure parts components within tolerances to achieve the desired performance during operation.
The TeleSensor is an external liquid level transmitter that uses a force balance principle to measure liquid levels in tanks. It has a flange that mounts to the outside of tanks and a diaphragm that senses the hydrostatic pressure from the liquid height. This pressure is converted to a proportional 4-20 mA electrical or pneumatic output signal. It can interface with indicators or controllers to monitor levels remotely. The system is largely unaffected by temperature and immune to drift, making it suitable for applications requiring accurate and reliable level measurement.
Pneumatic Products BAP desiccant dryer purifiers are designed to provide a continuous supply of clean, safe breathing air from your existing compressed air system.
This document contains a user manual for automatic control valves that includes the following sections:
- Section 1 provides information on basic valves including their operation, sizing guides for metal valves, details on plastic valves, and installation instructions.
- Section 2 covers automatic control valves in more detail including their design, operating pressures and velocities, media they can control, control options, and hydraulic performance.
- Section 3 includes operating instructions and a troubleshooting guide.
The manual provides technical specifications and guidelines for proper use of different types of automatic control valves for applications like irrigation, sewage, and industrial processes. It explains the valves' components, operation, pressure and flow characteristics.
This document is a catalogue for automatic control valves from 2001. It provides information to help engineers, dealers and users select the proper control valves for water networks. The catalogue is divided into sections for different valve groups and product types. It includes specifications, sizing guidance, model selections, and dimensions for the valves. The aims of the catalogue are to create a common language between customers and the factory to avoid confusion, and to enable users to easily select the best fitting valve for their requirements.
This is a packaged clean steam generator ready for use after connection of utilities. The unit produces clean steam using a purified feedwater source and plant steam.
Rupture Disc Products For Industrial Process SafetyCTi Controltech
Built on years of research and development, the HPX® and SANITRX HPX® Rupture Discs (bursting discs) are high precision pressure relieving devices that protect personnel, equipment and the environment. The versatility of the HPX® product family offers pressure protection for a wide range of applications in many processing industries, including: chemical, oil and gas, food, beverage, pharmaceutical, biotech, pulp and paper, power and more.
We put you in the best position
We have developed the rotary actuators presented here, which have proven their worth through many years of use, especially for fittings, butterfly valves and ball valves.
The highest safety and quality demands as well as longevity and precision are typical features of HKS rotary actuators. Our strengths also include ATEX, DIN standards or special customised solutions.
This document provides specifications for right angle flow control valves, including:
- Details on unidirectional and bidirectional flow controllers with ports ranging from M5 to G1/2.
- Dimensions and descriptions of valve series including SCU, MCU, SVU, MVU, SCO, and MCO.
- Information on coding, actuation methods, materials, and pneumatic data for the valves.
- Flow rate graphs showing performance of different port sizes.
- Instructions for assembling banjo-style flow control valves.
This document provides installation and operation instructions for a multiport valve softener. It includes pre-installation data on operating parameters and major components. It then details the softener installation process including the water softening process, locating equipment, assembly, resin loading, drain line sizing, and typical installation configurations. Finally, it describes the regeneration cycles of service, backwash, brine draw, slow rinse, fast rinse, and brine tank refill.
Siemens offers a full range of pre-designed turbocompressors from 600 to 600,000 cubic meters per hour for industries such as oil and gas, chemicals, and metals. Their product line includes single-stage compressors and blowers with separate or integrated gearboxes that can be matched with steam turbines or electric drivers. Siemens has over 100 years of experience in turbomachinery and has installed over 4,000 compressors and blowers worldwide.
UK Spectrum Policy Forum: Strategic Priorities for 2015/16techUK
The Steering Board has developed strategic priorities for the Spectrum Policy Forum in 2015/16. The priorities are to: 1) influence the UK position at international meetings regarding spectrum above 6GHz and potential additional WiFi spectrum; 2) engage new government ministers to ensure spectrum remains a priority regarding economic growth, healthcare, climate change, and transportation; 3) progress long-term goals around facilitating innovation, updating frameworks for valuing spectrum, opening millimeter wave bands, enabling public sector spectrum access, and incentivizing spectrum sharing.
Atlas Industries offers asphalt batching plant for sale.
We manufacture and offer capacities: 80 tph, 120 tph and 160 tph. Capacities above 160 tph will be tailor made
More: http://www.atlasindustries.in/asphalt-batching-plant.html
Manufacturing and Exporting a comprehensive range of process instruments and valves such as Safety Valve, Safety Relief Valve, Bar Stock Valve, IBR Safety Valve, Tubular Level Gauge, Reflex Level Gauge, Transparent Level Gauge, Auto Shut Off Cock..
The document provides technical specifications for erecting a 500 MW steam turbine from KWU design, including:
- It is a three cylinder reheat condensing turbine with a single flow HP turbine, double flow IP turbine, and double flow LP turbine.
- It has main stop and control valves, reheat stop and control valves, and extraction swing check valves.
- The rated speed is 50.0 revolutions per second and the maximum under valve wide open condition is 524.2 MW.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
From its beginnings in 1966, Kammer valves have been engineered and manufactured for specific answers to tough applications. Although, more than half of all Kammer valves are custom designed, custom applications often do not require additional time or cost due to the versatility and interchangeability of the Kammer design.
Tuning forks, with their stable resonant frequency, have been applied in numerous ways throughout many years. A modern application in industrial process control is the vibrating tuning fork level switch.The Jerguson Series 200 is a single point level switch which may be installed in any position in a pipe or vessel to detect the presence of a liquid.
The Series 200 employs a tuning fork style probe which vibrates at its natural frequency when in air. A piezoelectric crystal-system
is used to create a 1100 Hz vibration in the tuning fork. As the
tuning fork is covered by a liquid or slurry, a corresponding
shift occurs in the vibrating frequency of the tuning fork. This
shift is being monitored continuously and once a present threshold is exceeded, the output changes status.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
The document provides instructions for erecting pressure parts for a conventional 250 MW boiler. It outlines the sequence and key steps, which include erecting 3850 MT of boiler structure first, lifting the boiler drum using strand jacks, then erecting the furnace and second pass from top to bottom. Seal welding and insulation are also covered. The overall goal is to assemble the 5600 MT of pressure parts components within tolerances to achieve the desired performance during operation.
The TeleSensor is an external liquid level transmitter that uses a force balance principle to measure liquid levels in tanks. It has a flange that mounts to the outside of tanks and a diaphragm that senses the hydrostatic pressure from the liquid height. This pressure is converted to a proportional 4-20 mA electrical or pneumatic output signal. It can interface with indicators or controllers to monitor levels remotely. The system is largely unaffected by temperature and immune to drift, making it suitable for applications requiring accurate and reliable level measurement.
Pneumatic Products BAP desiccant dryer purifiers are designed to provide a continuous supply of clean, safe breathing air from your existing compressed air system.
This document contains a user manual for automatic control valves that includes the following sections:
- Section 1 provides information on basic valves including their operation, sizing guides for metal valves, details on plastic valves, and installation instructions.
- Section 2 covers automatic control valves in more detail including their design, operating pressures and velocities, media they can control, control options, and hydraulic performance.
- Section 3 includes operating instructions and a troubleshooting guide.
The manual provides technical specifications and guidelines for proper use of different types of automatic control valves for applications like irrigation, sewage, and industrial processes. It explains the valves' components, operation, pressure and flow characteristics.
This document is a catalogue for automatic control valves from 2001. It provides information to help engineers, dealers and users select the proper control valves for water networks. The catalogue is divided into sections for different valve groups and product types. It includes specifications, sizing guidance, model selections, and dimensions for the valves. The aims of the catalogue are to create a common language between customers and the factory to avoid confusion, and to enable users to easily select the best fitting valve for their requirements.
This is a packaged clean steam generator ready for use after connection of utilities. The unit produces clean steam using a purified feedwater source and plant steam.
Rupture Disc Products For Industrial Process SafetyCTi Controltech
Built on years of research and development, the HPX® and SANITRX HPX® Rupture Discs (bursting discs) are high precision pressure relieving devices that protect personnel, equipment and the environment. The versatility of the HPX® product family offers pressure protection for a wide range of applications in many processing industries, including: chemical, oil and gas, food, beverage, pharmaceutical, biotech, pulp and paper, power and more.
We put you in the best position
We have developed the rotary actuators presented here, which have proven their worth through many years of use, especially for fittings, butterfly valves and ball valves.
The highest safety and quality demands as well as longevity and precision are typical features of HKS rotary actuators. Our strengths also include ATEX, DIN standards or special customised solutions.
This document provides specifications for right angle flow control valves, including:
- Details on unidirectional and bidirectional flow controllers with ports ranging from M5 to G1/2.
- Dimensions and descriptions of valve series including SCU, MCU, SVU, MVU, SCO, and MCO.
- Information on coding, actuation methods, materials, and pneumatic data for the valves.
- Flow rate graphs showing performance of different port sizes.
- Instructions for assembling banjo-style flow control valves.
This document provides installation and operation instructions for a multiport valve softener. It includes pre-installation data on operating parameters and major components. It then details the softener installation process including the water softening process, locating equipment, assembly, resin loading, drain line sizing, and typical installation configurations. Finally, it describes the regeneration cycles of service, backwash, brine draw, slow rinse, fast rinse, and brine tank refill.
Siemens offers a full range of pre-designed turbocompressors from 600 to 600,000 cubic meters per hour for industries such as oil and gas, chemicals, and metals. Their product line includes single-stage compressors and blowers with separate or integrated gearboxes that can be matched with steam turbines or electric drivers. Siemens has over 100 years of experience in turbomachinery and has installed over 4,000 compressors and blowers worldwide.
UK Spectrum Policy Forum: Strategic Priorities for 2015/16techUK
The Steering Board has developed strategic priorities for the Spectrum Policy Forum in 2015/16. The priorities are to: 1) influence the UK position at international meetings regarding spectrum above 6GHz and potential additional WiFi spectrum; 2) engage new government ministers to ensure spectrum remains a priority regarding economic growth, healthcare, climate change, and transportation; 3) progress long-term goals around facilitating innovation, updating frameworks for valuing spectrum, opening millimeter wave bands, enabling public sector spectrum access, and incentivizing spectrum sharing.
Atlas Industries offers asphalt batching plant for sale.
We manufacture and offer capacities: 80 tph, 120 tph and 160 tph. Capacities above 160 tph will be tailor made
More: http://www.atlasindustries.in/asphalt-batching-plant.html
This document outlines topics related to air and water chemistry including:
1) Chemical tests for water and purification processes like filtration and chlorination.
2) Fractional distillation is used to separate oxygen and nitrogen from liquid air. Clean air is mostly nitrogen and oxygen with traces of other gases.
3) Common air pollutants like carbon monoxide, sulfur dioxide, and nitrogen oxides are discussed alongside their sources and effects on health and buildings. Catalytic converters remove nitrogen oxides from car exhaust.
4) The Haber process produces ammonia from nitrogen and hydrogen derived from hydrocarbons or steam under high pressures and temperatures.
FORGE is a project that aims to align Future Internet Research and Experimentation (FIRE) facilities with online education by developing methods and best practices for offering FIRE experimentation resources to learners. It will connect the learning community to existing FIRE platforms and tools. FORGE will produce interactive eBooks and online courses that incorporate experiments using FIRE testbeds to introduce networking concepts. It aims to promote self-regulated learning through hands-on experimentation.
Hangout como utilizar o vídeo no Facebook ?Ana Mendes
O documento discute as tendências do marketing de vídeo no Facebook, incluindo o aumento do consumo de vídeos em dispositivos móveis, a priorização do formato de vídeo pela plataforma, e estratégias para produção, distribuição e otimização de vídeos para alcançar audiências no Facebook.
The document provides background information on Martin Luther in 10 sections:
1. Luther studied law but became an Augustinian monk and later a professor of biblical literature.
2. He married Katherina von Bora and had no children.
3. His career progressed from monk to priest to professor, until breaking with the Catholic Church on October 31, 1517.
4. Luther had a significant impact by writing hymns, translating the New Testament to German, and starting the Protestant reformation.
This document describes an original glove that provides comfortable fit and dexterity for hand protection. The glove features stretch spandex for flexibility, a seamless palm layer for dexterity, and durable synthetic leather and thermal plastic rubber closure. It has become the most recognized work glove for its versatility and proven performance over 20 years for tasks like maintenance, equipment operation, and home improvement projects.
The document describes the OmniScan MX2 phased array flaw detector from Olympus. The MX2 offers improvements over the previous MX model including a brighter, larger touchscreen, faster setup and testing speeds, more data storage capacity, and new analysis software. It is a modular and customizable instrument that can accommodate current and future phased array technologies to meet a user's evolving needs.
Este documento apresenta uma introdução aos espaços vetoriais de dimensão infinita. Discute conceitos básicos de espaços vetoriais, subespaços vetoriais e bases de Hamel. Também aborda espaços normados, transformações lineares e propriedades que diferem entre espaços de dimensão finita e infinita.
This document outlines the SWOT analysis for an organization. It identifies internal strengths such as having a willing and customer-oriented staff. Weaknesses include high staff turnover and the need for more training. Opportunities exist in partnering with hospitals, insurance companies, and other sectors. Threats come from larger competitors in the assistance and healthcare markets that have greater brand awareness.
Big changes have already hit the construction industry in California in the form of a new Industrial Storm Water General Permit, but even more changes are looming. The State Water Resources Control Board is working on a new permitting process for protecting “waters of the state.” Learn the latest on this important regulatory front and how it may impact your operations.
The document summarizes a portable blast machine system that:
1. Is rated for 150 psi and holds 2 cubic feet of blast media.
2. Comes equipped with pneumatic remote controls and includes an Apollo 600 HP respirator.
3. Is a high-performance blast cleaning system that removes corrosion and coatings from surfaces using abrasive media.
This document provides technical specifications for particulate filters (CPF-20 and CPF-80) that remove mists and particulates from compressed breathing air for one to four operators. The CPF filters feature a pressure regulator, mounting options, and replaceable filter cartridges that last up to three months. They are used between a compressed air source and respirator to clean the air before it reaches the respirator.
The Variable Area flowmeter is an instrument for metering the flowrate of liquids and gases in a pipeline. It includes a vertically oriented conical tube, whose diameter is larg- er at the top than at the bottom, through which the fluid flows upward and in which a vertically moving float is positioned.
This document provides an operation manual for the Vortex Flow Meter Model LUGB. It describes the product's general information including its description, operational principle, structure, technical data, and cautions for installation. The document also covers electrical wiring details for the different meter models and programming/setup instructions.
This document discusses Cummins Filtration's HF6500 Series hydraulic filters. It provides specifications for two styles of the HF6500 including maximum static pressure, recommended working pressure, seals, and service clearance. Style A uses NPT port connections while Style B uses BSP port connections. The document also provides ordering information including available filter heads, port sizes, bypass settings, rated flows, and applications.
The document provides details about an industrial training report completed by two interns at Hardrock Attachments Pvt. Ltd., a manufacturer of fabricated structures for construction machinery. The report describes the company's plant layout, manufacturing processes, machinery, quality systems, products, and maintenance procedures. It aims to provide a comprehensive overview of the heavy fabrication and machining industry for educational purposes.
This document provides a product catalog for primary cementing products from Wellcare Oil Tools Pvt Ltd. It includes an index of various float equipment, plugs, centralizers, and other accessories. Float equipment allows for casing buoyancy and prevents cement backflow. Options include cement float collars, shoes, and equipment that permits automatic or differential filling. The catalog also describes stage cementing collars, plugs, centralizers, and other accessories. Wellcare specializes in designing and manufacturing these products for cementing oil and gas wells.
Apex Power Tools 2016 Gi 1250-eu-en0316 03Sean Ibrahim
The new catalogue GI-1250 shows the most important Industrial Power Tools of the brands Airetool, Apex, Dotco, Master Power, and Cleco. New Industrial Power Tools for Professionals.
The document provides an overview of industrial power tools from several brands, including Airetool, Apex, Dotco, Master Power, and Cleco. It describes various types of power tools such as tube rolling systems, tube expanders, sockets, drills, grinders, sanders, and assembly tools. The tools are intended for professional users and applications like manufacturing, maintenance, fastening, drilling, cutting, grinding, and finishing. Specifications and features are provided for each product line.
development of main headings and gate roads with the use of road heading and bolter miners has paramount importance for effective production from a Longwall mine
Parker manufactures one of the widest offerings of quick connect hose fittings available, with variants, options, and specialized products to suit almost every application.
The document provides an overview of various flow control solutions from Pentair Valves & Controls, including valves, actuators, instrumentation and controls from numerous brands. It lists specific product lines for different valve types like ball valves, butterfly valves, check valves and more. Key details are provided on size ranges, pressure and temperature ratings, materials of construction and major markets served. The company aims to be a total solutions provider for flow control applications across many industries.
This document provides specifications for renovating and upgrading two dust extraction systems. Key points include:
- The systems will include bag filters, cyclones, centrifugal fans, ducting, and other components to collect dust from machinery and exhaust clean air.
- The bag filters must be capable of handling 20,000 cubic meters per hour and have components like filter bags, manifolds, and pulse valves.
- The ducting design must meet standards for materials, supports, and velocities to efficiently convey dust to the filtration equipment.
- The upgraded systems must limit worker exposure to respirable dust and ensure stack emissions do not exceed regulatory limits.
Making the best instrument selection for a flow measurement application should include an assessment of what the operators really need in order to safely and effectively run the process or perform the task related to the measurement of fluid flow.
Perfect Engineers is an Indian company established in 1988 that manufactures quick-release couplings and valves. It provides products in materials like carbon steel, stainless steel, brass, and others. The document includes details on the company's product range, materials, specifications, dimensions, and applications for various quick connectors, ball valves, needle valves, and other components. It also provides guidelines for safe handling of hydraulic quick couplers.
Integral Connections, Integral Connections Oilfield Equipment - WOM Groupwomgroup
WOM Group provides Well Service Solutions including integral connections. All Integral Connections are subjected to controlled heat-treat processes to help integrity.
This document provides an overview of flow control products from Worldwide Oilfield Machine (WOM), including plug valves, choke valves, flowback chokes, flowline equipment, hammer unions, pup joints, hose loops, swivel joints, and manifolds. It describes the specifications and features of these products, which are designed for applications in drilling, production, and pressure pumping and can withstand pressures up to 15,000 psi. WOM offers a full range of well service solutions and flow control equipment through its global manufacturing and distribution network.
WOM Cementing and Circulating hose loops utilize the combination of WOM’s swivel joint flexibility and hose design for easy connection and storage for transportation.
1. Description 2 Cu Ft
Field portable, high-production, single-
chamber blast machine, rated at 150 psi,
(for one operator). Holds 2 cubic feet of
Contractor
blast media. Equipped with Millennium
pneumatic remote controls and Quantum
Blast Machine
manual metering valve.
T ECHNICAL D ATA S HEET Stock No. 21490
Note: For safe, efficient blasting, read
and follow the owner's manual and seek
training for everyone who will use this
equipment.
Purpose
High-performance blast cleaning
system removes corrosion, mill scale, and
coatings from most surfaces. Produces a
uniform surface texture, and creates a
surface profile to increase bonding for
coatings. See related literature for
additional applications. Machine holds 2
cubic feet of abrasive for up to 30
minutes of continuous blasting at 100 psi
with standard No. 4 nozzle (1/4-inch
orifice).
Requirements for Operation
These items are required but not included
with this equipment.
• Clean, dry, compressed air of
sufficient volume to maintain desired
pressure at the nozzle. See Air
Consumption Chart in Blast Off 2
booklet.
• Maximum working pressure 150 psi
• Minimum pressure 30 psi needed to
operate OSHA-required remote control
valves
• NIOSH-approved supplied-air
respirator Advantages Approvals and Certifications
• Grade D breathing-air supply as • Rated for 150-psi maximum working Blast machine pressure vessel built to
defined by the Compressed Gas pressure American Society of Mechanical
Association Commodity Specification: • 11/2-inch Millennium valve provides Engineers (ASME) code for 150-psi
G-7.1 (www.cganet.com) unrestricted air flow working pressure. Vessel is hydro-
• Abrasive blast media - consult abrasive • Quantum metering valve maintains statically tested and National Board
supplier for appropriate media for your smooth, consistent flow, adjustment certified.
application knob allows precise control of Remote control system complies with
• Blast suit and work boots media flow OSHA regulation 1910.244 (b).
• 29-inch width fits through standard
doorways
Description of Operation • Two-wheel integral cart for ease of
The operator controls blasting from a moving
remote control handle at the nozzle. • Robust handles act as skid for loading
Pressing the handle starts blasting, machine into pickup or trailer and
releasing it stops blasting. The blast protect valves and piping from damage.
machine contains abrasive and meters it • Central hookup point for blast hose and
into the compressed air stream. remote controls
• Weather-resistant storage area holds
manuals, paperwork and small parts