This document provides specifications for right angle flow control valves, including:
- Details on unidirectional and bidirectional flow controllers with ports ranging from M5 to G1/2.
- Dimensions and descriptions of valve series including SCU, MCU, SVU, MVU, SCO, and MCO.
- Information on coding, actuation methods, materials, and pneumatic data for the valves.
- Flow rate graphs showing performance of different port sizes.
- Instructions for assembling banjo-style flow control valves.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Catalog HVAC - van công nghiệp Honeywell - beeteco.comBeeteco
Catalog hvac - van cong nghiep honeywell - beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Catalog Thiết bị HVAC - Van công nghiệp Honeywell - Beeteco.comBeeteco
Catalog Thiết bị HVAC - Van công nghiệp Honeywell
Thermostat - Inverter - Valve - actuator damper - sensor
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Máy bơm ly tâm cánh quạt đơn, cực kỳ im lặng thích hợp cho các ứng dụng gia đình, dân dụng và công nghiệp, với đường cong rất phẳng để đảm bảo áp suất không đổi ở sự thay đổi của lưu lượng
Thông số kỹ thuật máy bơm nước đẩy cao Pentax CM 50
Hãng sản xuất: Pentax
Mã sản phẩm: CM 50
Bảo hành : Chính hãng, 12 tháng.
Xuất Xứ : Italy
Nhiệt độ nước : Lên tới 50°C
Chủng loại : Ly Tâm
Cột Áp : 21,5 - 12 m
Lưu Lượng : 0 - 5,4 m³/h
Ống vào/ra : 1" / 1"
Nguồn điện : 1 Pha / 50Hz
Cấp Độ Chống Nước : IP 44
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Catalog HVAC - van công nghiệp Honeywell - beeteco.comBeeteco
Catalog hvac - van cong nghiep honeywell - beeteco.com
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Catalog Thiết bị HVAC - Van công nghiệp Honeywell - Beeteco.comBeeteco
Catalog Thiết bị HVAC - Van công nghiệp Honeywell
Thermostat - Inverter - Valve - actuator damper - sensor
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Máy bơm ly tâm cánh quạt đơn, cực kỳ im lặng thích hợp cho các ứng dụng gia đình, dân dụng và công nghiệp, với đường cong rất phẳng để đảm bảo áp suất không đổi ở sự thay đổi của lưu lượng
Thông số kỹ thuật máy bơm nước đẩy cao Pentax CM 50
Hãng sản xuất: Pentax
Mã sản phẩm: CM 50
Bảo hành : Chính hãng, 12 tháng.
Xuất Xứ : Italy
Nhiệt độ nước : Lên tới 50°C
Chủng loại : Ly Tâm
Cột Áp : 21,5 - 12 m
Lưu Lượng : 0 - 5,4 m³/h
Ống vào/ra : 1" / 1"
Nguồn điện : 1 Pha / 50Hz
Cấp Độ Chống Nước : IP 44
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
The Yuken "A" series variable displacement piston pumps are high efficiency swash plate type piston pumps developed using Yuken's unique technology to meet customers' needs for energy efficient and low noise solutions. These pumps support a wide variety of displacement sizes and control types and are widely used in various hydraulic systems.
Catalog Actuator Damper HoneyWell ( Động cơ điều khiển van gió)Beeteco
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
This pump handbook has been produced to support pump users
at all levels, providing an invaluable reference tool. The handbook
includes all the necessary information for the correct selection
and successful application of the Alfa Laval ranges of Centrifugal,
Liquid Ring and Rotary Lobe Pumps.
The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within
a very narrow temperature band.
أنظمة تعزيز الضغط تعمل آليا بشكل كامل و هى المثلى لعمليات إمدادات المياه للتطبيقات الصناعية, التجارية وأنظمة الرى فقد يتضمن النظام الواحد حتى أربعة طلمبات, تعمل بتدفق حتى 640 متر مكعب/ساعة حتى 160 متر وتتحمل حرارة السوائل المضخة حتى 80 درجة مئوية
http://rheoserve.com/booster_sets.html
The AP pneumatic positioner combines the smoothness and accuracy of Kinetrol’s proven mechanical positioner technology (using a proportional spool valve driven by a simple, accurate and robust force balance mechanism) with new advances in convenience and simplicity of use, derived from the unique innovative design both of the internal mechanism and of the overall package.
The result is a positioner with unparalleled performance and real industrial robustness, sweet and easy to calibrate and characterize, and adaptable to the whole range of applications with its unbeatable list of options – high
flow valves, direct mount or industry standard discrete mount
housings, 4-20mA angle retransmit, limit switches, Clear Cone position monitor and I/P convertors (either simple or with various explosion proof options).
Gems specializes in made-to-order fluidic systems, and a major segment of that
activity includes the integration of miniature solenoid valves and manifold assemblies.
Our miniature and subminiature solenoid valves are utilized in solutions that serve
industries ranging from medical and biotech to automotive and industrial equipment.
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
The Yuken "A" series variable displacement piston pumps are high efficiency swash plate type piston pumps developed using Yuken's unique technology to meet customers' needs for energy efficient and low noise solutions. These pumps support a wide variety of displacement sizes and control types and are widely used in various hydraulic systems.
Catalog Actuator Damper HoneyWell ( Động cơ điều khiển van gió)Beeteco
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
This pump handbook has been produced to support pump users
at all levels, providing an invaluable reference tool. The handbook
includes all the necessary information for the correct selection
and successful application of the Alfa Laval ranges of Centrifugal,
Liquid Ring and Rotary Lobe Pumps.
The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within
a very narrow temperature band.
أنظمة تعزيز الضغط تعمل آليا بشكل كامل و هى المثلى لعمليات إمدادات المياه للتطبيقات الصناعية, التجارية وأنظمة الرى فقد يتضمن النظام الواحد حتى أربعة طلمبات, تعمل بتدفق حتى 640 متر مكعب/ساعة حتى 160 متر وتتحمل حرارة السوائل المضخة حتى 80 درجة مئوية
http://rheoserve.com/booster_sets.html
The AP pneumatic positioner combines the smoothness and accuracy of Kinetrol’s proven mechanical positioner technology (using a proportional spool valve driven by a simple, accurate and robust force balance mechanism) with new advances in convenience and simplicity of use, derived from the unique innovative design both of the internal mechanism and of the overall package.
The result is a positioner with unparalleled performance and real industrial robustness, sweet and easy to calibrate and characterize, and adaptable to the whole range of applications with its unbeatable list of options – high
flow valves, direct mount or industry standard discrete mount
housings, 4-20mA angle retransmit, limit switches, Clear Cone position monitor and I/P convertors (either simple or with various explosion proof options).
Gems specializes in made-to-order fluidic systems, and a major segment of that
activity includes the integration of miniature solenoid valves and manifold assemblies.
Our miniature and subminiature solenoid valves are utilized in solutions that serve
industries ranging from medical and biotech to automotive and industrial equipment.
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
Measuring level of liquid in a tank or vessel can be accomplished in a number of ways, all of which require some arrangement of instrumentation to either infer the liquid level from the measurement of a related physical property, or directly deliver the liquid level visually using a scaled gauge arrangement. One indirect method of level measurement is the bubbler method, so named because it employs a purging gas that continually vents from the bottom of a tube extending into a tank of liquid. Through a simple apparatus, the level of a liquid can be inferred by the amount a back pressure exerted upon the gas flowing through the tube.
These instruments are what will be required to build a level measurement apparatus that uses the bubbler method.
WOM Cementing and Circulating hose loops utilize the combination of WOM’s swivel joint flexibility and hose design for easy connection and storage for transportation.
Integral Connections, Integral Connections Oilfield Equipment - WOM Groupwomgroup
WOM Group provides Well Service Solutions including integral connections. All Integral Connections are subjected to controlled heat-treat processes to help integrity.
Самая компактная конструкция блока распределителей. В одном корпусе может быть два независимых 3/2 распределителя. Монтаж на DIN рейке. Ресурс не менее 50 млн. циклов
Kraus & naimer control switches kn120gb0716Dien Ha The
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
Kraus & naimer control switches kn120gb0716-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Take a look at these landscape watering options. Tired of paying for expensive brass valves? Check out the plastic valve options. Save money with rotary nozzles.
GE Oil & Gas offers, under their Becker brand name, segmented valve rotary control valves known throughout the world for quality and durability. Becker valves have a proven track record, installed in a variety of process industries and applications. Segmented ball rotary valves offer dependability and a unique combination of high capacity and turndown capability.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Wondering if Your Mercedes EIS is at Fault Here’s How to Tell
Pneumatica
1. rig ht angle flow co ntrol valves
4
F l o w c o n tr o l v a l v es
Right Angle Flow Control Valves - BSP/Metric
Series SCU, MCU, SVU, MVU, SCO, MCO
Unidirectional and bidirectional
banjo flow controllers
Ports M5, G1/8, G1/4, G3/8, G1/2
These unidirectional and bidirectional flow
controllers have been designed as small
as possible so as to be mounted directly
on valves or cylinders.
The great variety of adjustable fittings makes it
possible to complete the regulator with the most
suitable system in relation
to the available tube.
Only the G1/2 model is supplied complete with
banjo flow controllers.
For the other models the banjo fitting is to be
requested separately.
TECHNICAL SPECIFICATIONS
needle type, right angle banjo assembly
Valve group
unidirectional and bidirectional controller
Materials
OT58 nickel-plated brass body and threads - Buna-N seals, Nylon® gaskets.
Mounting
by male thread
Ports
M5 - G1/8 - G1/4 - G3/8 - G1/2
Installation
in any position
Operating temperature
from 0 to 80°C (with dry air -20°C) [32°F — 175°F (with dry air -4°F)]
Lubricant
BSP/METRIC
Construction
compatible with Buna-N (3° — 10° E)
PNEUMATIC DATA
Operating pressure
Nominal pressure
6 bar [87 psi]
Nominal flow
see graph
Nominal diameter
M5 = 1.5 mm (.059”)
G1/8 = 2 mm (.078”)
G3/8 = 7 mm (.275”)
G1/2 = 12 mm (.472”)
Fluid
152
from 1 to 10 bar [14.5 - 145 psi]
filtered air
G1/4 = 4 mm (.157”)
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
2. right angle flow control valv es
4
SVU
F l o w c o n tr o l v a l v es
Nickel-Plated Brass Flow-Control Valves:
BSPP & BSPT Threads
GMCU
FEATURES
BENEFITS
• All-Metal, Nickel-Plated body and Threads,
• Compact Brass bodies from Brass forgings
• Specialized O-ring choices for High-Temp,
Low-Temp, Special Fluids, Food-Grade
compatibility
• Multiple Thread sealant systems: BSPP &
BSPT, or O-Ring Spot Face seals
• Broad Range of configurations, tube-thread
combinations
• Removable Collet and tube o-rings
• Highly accurate Flow-rate repeatability &
Higher Flow
• Manual Adjustment knob or Screw-Driver slot
• Hex Locking-nut
• Precise Manual knob, with Internal hex-key
• Full Swivel design, NPTF and Metric/BSP,
with integrated Push-In Fittings or Female
thread ports
• Alternate Non-Swivel design with Banjo Tube
connections and thread adapters
• Meter-IN, Meter-OUT and Needle-Orifice flow
designs for assembly on valves, cylinders or
in-line use
• Alternate sintered bronze banjo for fully
adjustable silencer/muffler with speed control for exhaust port mounting, (see Part No.
2905 to add to any banjo flow control body)
Collet
• Won’t break like plastic release rings and bodies; More Durable design
• Higher holding force, with easier release
• Won’t scratch tubes like “bite-ring” designs
• Less chance of micro-leakage and bubble-leaks over time due to damaged tubing
Body
• Resistant to UV exposure
• Better resistance to stress-cracking, abrasion, solvents, detergents, hydrocarbons
and other fluid media
• FDA/NSF approved materials, (Including customized Nickel-Plating and o-ring
options)
• Simplified manifold circuits with broader variety of fitting combinations and
shapes to select
• Lighter weight for End-of-Arm tooling & Robotic handling,
• Compact design reduces overall dimensions for valve & cylinder assemblies,
packaging applications and control cabinets
BSP/METRIC
Design
• Accuracy and Repeatability of Flow-Control valves allows timing circuits to be
design, faster OEM set-up and simplified MRO field installation and replacements
• Simplified manifold circuits with broader variety of Tube – Thread combinations
to select
• Lighter weight for End-of-Arm tooling & Robotic handling
• Compact design reduces overall dimensions for valve assemblies, packaging
applications and control cabinets
• More compact flow capacity reduces cylinder spacing with improved overall speed
• Fine tuning of flow with manual knob or screw-driver adjustment
• Convertible into “Tamper-Proof” by removing manual knob or sealing
screw-driver slot
• Interchangeable Inch and Metric Tube O.D. banjo connections and thread
adapters for “hybrid” Fittings and Flow-control valve requirements
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
153
3. rig ht angle flow co ntrol valves
4
F l o w c o n tr o l v a l v es
Coding of banjo flow controllers (Stud bodies onlY)
MCU 7 02-M5
Actuation
M = Manual
S = Screwdriver
Assembly
CU = on cylinders meter-out
VU = on valves meter-in
CO = needle orifice
Identification of different TYPES
Flow control range
02 = ø 1.5 max
04 = ø 2 max
06 = ø 4 max
Versions
08 = ø 7 max
6 = needle (screwdriver operated) 10 = ø 12 max
7 = needle (manual operated)
Ports
M5
G1/8
G1/4
G3/8
G1/2
Available banjo flow controllers (see instructions on p. 113 or p. 140)
SCU
MCU
SVU
MVU
SCO
MCO
MCU/6610
MVU
MCO
MCU/1610
MVU
MCO
SCU/2023
SVU
SCO
SCO/2905
(silenced)
UNIDIRECTIONAL AND BIDIRECTIONAL FLOW CONTROLLERS
BSP/METRIC
To ensure the right choice of unidirectional flow
controller, proceed as follows: calculate the
quantity of air in Nl/min (see cylinder Table);
determine
the stroke time of the cylinder; refer to graph
to see which controller is the right type.
In the case of bidirectional regulators, refer
to the graph and check whether the flow control
range is suitable for the work required.
M5 [10-32 UNF]
Flow Qn (Nl/min.) from B → A with needle OPEN: 60
Flow Qn (Nl/min.) from B → A with needle CLOSED: 43
NB: Qn is determined with a supply pressure
of 6 bar and with DP = 1 bar at the outlet
N° = number of screw turns.
Flow Rate Qn (Nl/min)
Screw Turns
154
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
4. right angle flow control valv es
4
G1/8
G1/4
Flow Qn (Nl/min.) from B → A with needle OPEN: 200
Flow Qn (Nl/min.) from B → A with needle CLOSED: 70
Flow Qn (Nl/min.) from B → A with needle OPEN: 530
Flow Qn (Nl/min.) from B → A with needle CLOSED: 160
NB: Qn is determined with a supply pressure
of 6 bar and with DP = 1 bar at the outlet
N° = number of screw turns.
F l o w c o n tr o l v a l v es
UNIDIRECTIONAL AND BIDIRECTIONAL FLOW CONTROLLERS
NB: Qn is determined with a supply pressure
of 6 bar and with DP = 1 bar at the outlet
N° = number of screw turns.
Flow Rate Qn (Nl/min)
Flow Rate Qn (Nl/min)
Screw Turns
Screw Turns
G3/8
G1/2
Flow Qn (Nl/min.) from B → A with controller OPEN: 710
Flow Qn (Nl/min.) from B → A with controller CLOSED: 410
Flow Qn (Nl/min.) from B → A with controller OPEN: 2570
Flow Qn (Nl/min.) from B → A with controller CLOSED: 1330
NB: Qn is determined with a supply pressure
of 6 bar and with DP = 1 bar at the outlet
N° = number of screw turns.
NB: Qn is determined with a supply pressure
of 6 bar and with DP = 1 bar at the outlet
N° = number of screw turns.
Flow Rate Qn (Nl/min)
Flow Rate Qn (Nl/min)
BSP/METRIC
Screw Turns
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
Screw Turns
155
5. rig ht angle flow co ntrol valves
4
F l o w c o n tr o l v a l v es
Valves Series SCU (Meter Out)
Unidirectional flow controller for mounting on single-acting or double-acting
cylinders. Adjustment of setting by a screwdriver.
Ports: M5, G1/8, G1/4, G3/8.
Note: M5 flow controllers must be used together with M6 banjo fittings.
Note: Stud only, banjos ordered separately.
DIMENSIONS (MM)
Mod.
A
S
H
L
SW
SCU 602-M5
M5
5.5
3.5
21.5
8
SCU 604-1/8
G1/8
12.5
6
35.5
14
SCU 606-1/4
G1/4
12.5
8
37.5
17
SCU 608-3/8
G3/8
12.5
8
41.5
19
Valves Series MCU (Meter Out)
Unidirectional flow controller for mounting on valves and cylinders.
Adjustment of setting by knurled screw.
Ports: M5, G1/8, G1/4.
Note: M5 flow controllers must be used together with M6 banjo fittings.
Note: Stud only, banjos ordered separately.
DIMENSIONS (MM)
Mod.
A
S
H
L
Z
SW
SW1
MCU 702-M5
M5
5.5
3.5
31
35
8
5.5
MCU 704-1/8
1/8
12.5
6
45
50
14
7
MCU 706-1/4
1/4
12.5
8
48
54
17
7
MCU 708-3/8
3/8
12.5
8
54.5
62.5
19
10
Valves Series SVU (Meter-In)
BSP/METRIC
Unidirectional flow controller for mounting on valves and cylinders. Adjustment
of setting by a screwdriver.
Ports: M5, G1/8, G1/4.
Note: M5 flow controllers must be used together with M6 banjo fittings.
DIMENSIONS (MM)
Mod.
S
H
L
SW
M5
5.5
3.5
21.5
8
SVU 604-1/8
G1/8
12.5
6
35.5
14
SVU 606-1/4
156
A
SVU 602-M5
G1/4
12.5
8
37.5
17
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
6. right angle flow control valv es
4
F l o w c o n tr o l v a l v es
Valves Series MVU (Meter-In)
Unidirectional flow controller for mounting on valves and cylinders.
Adjustment of setting by a manually operated knurled screw.
Ports: M5, G1/8, G1/4
Note: M5 flow controllers must be used together with M6 banjo fittings.
Note: Stud only, banjos ordered separately.
DIMENSIONS (MM)
Mod.
A
S
H
L
Z
SW
SW1
MVU 702 - M5
M5
5.5
3.5
31
35
8
5.5
MVU 704 - 1/8
G1/8
12.5
6
45
50
14
7
MVU 706 - 1/4
G1/4
12.5
8
48
54
17
7
Valves Series SCO (Needle Orifice)
Bidirectional flow controller.
Adjustment of setting by a screwdriver.
Ports: M5, G1/8, G1/4
Note: M5 flow controllers must be used together with M6 banjo fittings.
Note: Stud only, banjos ordered separately.
DIMENSIONS (MM)
Mod.
A
S
H
L
SW
SCO 602 - M5
MS
5.5
3.5
21.5
8
SCO 604 - 1/8
G1/8
12.5
6
35.5
14
SCO 606 - 1/4
G1/4
12.5
8
37.5
17
Valves Series MCO (Needle Orifice)
BSP/METRIC
Bidirectional flow controller.
Adjustment of setting by a knurled screw.
Ports: M5, G1/8, G1/4
Note: M5 flow controllers must be used together with M6 banjo fittings.
Note: Stud only, banjos ordered separately.
DIMENSIONS (MM)
Mod.
A
S
H
L
Z
SW
SW1
MCO 702 - MS
M5
5.5
3.5
31
35
8
5.5
MCO 704 - 1/8
G1/8
12.5
6
45
50
14
7
MCO 706 - 1/4
G1/4
12.5
8
48
54
17
7
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
157
7. rig ht angle flow co ntrol valves
4
F l o w c o n tr o l v a l v es
Banjo-Style Flow Control Valve Assembly
BSP Non-Swivel models and customized NPTF models not shown in catalog, or hybrids
1. Older style flow-control valves with banjo tube/thread connections and stud valve types may be assembled in
a variety of combinations.
2. Select any stud valve flow-control type; Meter-In, Meter-Out, or Needle –Orifice with either Manual or
Screwdriver adjustment, ( i.e. MCU-, SCU-, MVU-, SVU-, MCO-, SCO- from BSP flow control body offering).
3. Select desired banjo connection, either inch OD, metric/mm OD, metric compression, female thread or silencer ring from banjo offerings in Fittings section of catalog , ( i.e. 6610 04-02, 6610 6-1/8, 2023 02-02,
2023 ¼-1/4, 1610 6/4-1/8, 2905 ¼, etc.)
4. Select thread adapter to “close” the final assembly and hold banjo in place, ( i.e. 2520 02-1/8, 2520
04-1/4, 2520 ¼-1/4, 2520 1/8-1/8), depending on final thread choice of BSP or NPTF threads.
or
BSP/METRIC
or
+
or
or
158
=
or
or
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
8. right angle flow control valv es
4
Unidirectional flow controller
for mounting on single-acting or
double-acting cylinders.
Knurled screw adjustment.
Mod.
Mod.
SCU 610-1/2
MCU 610-1/2
Valves Series SVU (Meter In)
Valves Series MVU (Meter In)
Unidirectional flow controller for mounting
on valves.
Screwdriver adjustment.
Unidirectional flow controller
for mounting on single-acting or
double-acting cylinders.
Knurled screw adjustment.
Mod.
Mod.
SVU 610-1/2
MVU 710-1/2
BSP/METRIC
Valves Series MCU (Meter Out)
Unidirectional flow controller for mounting
on single-acting or double-acting cylinders.
Screwdriver adjustment.
F l o w c o n tr o l v a l v es
Valves Series SCU (Meter Out)
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.
159
9. rig ht angle flow co ntrol valves
4
Bidirectional flow controller.
Knurled screw adjustment.
Mod.
Mod.
SCO 610-1/2
MCO 710-1/2
Flow control valves with silencer Series RSW
Silencer bushing Series 2905
Flow control valves with silencer.
Connections: G1/8, G1/4, G1/2
Silencer bushing for Mod. SCO… or MCO…
Assemble onto Stud Controller
DIMENSIONS
BSP/METRIC
Valves Series MCO (Needle Orifice)
Bidirectional flow controller.
Screwdriver adjustment.
F l o w c o n tr o l v a l v es
Valves Series SCO (Needle Orifice)
DIMENSIONS
A
B
C
D
SW
Mod.
A
S
H
RSW 1/8
G1/8
13
22
6
12
2905 1/8
14
10
14.5
RSW 1/4
G1/4
16
27
8
16
2905 1/4
18
13.5
14.5
RSW 1/2
G1/2
26
35
11
26
2905 3/8
21
16.8
14.5
Mod.
160
The company reserves the right to vary models and dimensions without notice.
These products are designed for industrial applications and are not suitable for sale to the general public.