We put you in the best position
We have developed the rotary actuators presented here, which have proven their worth through many years of use, especially for fittings, butterfly valves and ball valves.
The highest safety and quality demands as well as longevity and precision are typical features of HKS rotary actuators. Our strengths also include ATEX, DIN standards or special customised solutions.
The ISV product line includes valve sizes ranging form 1/4" to 56" in pressure classes through 2500 and up to 10,000 psig working pressures with a large selection of body materials and trims.
Pipeline, Oil & Gas Service Ball Valves
API 6D and API 608, API 607 Firesafe with NACE compliance
2 & 3 piece trunion mounted ball valves
2 & 3 piece floating ball valves
Industrial Floating Ball Valves
API 608 / ASME B16.34, API 607 Firesafe with NACE compliance
2 & 3 piece flanged, SW, BW and NPT
Uni-body NPT
2 & 3 piece NPT industrial valves
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Hytork® develops and manufacturers actuators for the automation of industrial valves. Product range includes pneumatic actuators and a wide range of control accessories. Product development is based on modular construction that allows for fast delivery from stock components and easy upgrade to control units as well as quick and efficient modification and repair.
Gases and steam are compressible. It is normal that when gas or steam reaches the disc in a valve, it compresses and builds up before passing through the valve. This compression may cause a rapid build up of system pressure and be potentially harmful. There are other process conditions, such as boiler control malfunction, that can create elevated pressure in a closed system. Every system and component in a pressurized system has a safe operating pressure limit that must not be exceeded.
Steam thermocompressors utilize a flow of high pressure steam to boost the pressure of a stream of low pressure steam. The purpose can be to either recycle the low pressure steam with the added heat, or to create a usable steam supply from a low pressure steam source.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
The ISV product line includes valve sizes ranging form 1/4" to 56" in pressure classes through 2500 and up to 10,000 psig working pressures with a large selection of body materials and trims.
Pipeline, Oil & Gas Service Ball Valves
API 6D and API 608, API 607 Firesafe with NACE compliance
2 & 3 piece trunion mounted ball valves
2 & 3 piece floating ball valves
Industrial Floating Ball Valves
API 608 / ASME B16.34, API 607 Firesafe with NACE compliance
2 & 3 piece flanged, SW, BW and NPT
Uni-body NPT
2 & 3 piece NPT industrial valves
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Hytork® develops and manufacturers actuators for the automation of industrial valves. Product range includes pneumatic actuators and a wide range of control accessories. Product development is based on modular construction that allows for fast delivery from stock components and easy upgrade to control units as well as quick and efficient modification and repair.
Gases and steam are compressible. It is normal that when gas or steam reaches the disc in a valve, it compresses and builds up before passing through the valve. This compression may cause a rapid build up of system pressure and be potentially harmful. There are other process conditions, such as boiler control malfunction, that can create elevated pressure in a closed system. Every system and component in a pressurized system has a safe operating pressure limit that must not be exceeded.
Steam thermocompressors utilize a flow of high pressure steam to boost the pressure of a stream of low pressure steam. The purpose can be to either recycle the low pressure steam with the added heat, or to create a usable steam supply from a low pressure steam source.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
Fire Pro is a manufacturer of premium fire fighting equipment built specifically for the industrial, municipal, wild-land, and marine markets. We carry and extensive array of monitors, nozzles, and hydrants for multiple applications and can also field requests for custom orders.
The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within
a very narrow temperature band.
2-JAW PARALLEL GRIPPER
Equipped with two parallel gripper fingers, RÖHM grippers are optimally suited for universal gripping of round and angular workpieces. Especially on robots or portals, the 2-jaw parallel grippers will convince you with their compact design, low own weight and high gripping force.
Advantages
- High gripping force with low own weight and compact design
- Maximum flexibility thanks to versatile connection and fastening options
- Long service life and high reliability thanks to specially ground base jaws in proven T-slot guide
3-JAW CENTRIC GRIPPER
Equipped with three centrically arranged gripper fingers, RÖHM RZP grippers are optimally suited for universal and self-centering gripping of round workpieces. Especially on robots or portals, the 3-jaw centric grippers will convince you with their compact design, low dead weight and high gripping force.
Advantages
-High gripping force with low dead weight and compact design
-Maximum flexibility thanks to versatile connection and fastening options
-Long service life and high reliability thanks to specially ground base jaws in proven
T-slot guide
2-JAW LONG STROKE GRIPPER
The 2-jaw long stroke gripper allows for large jaw strokes, thanks to its design, and is therefore optimally suited for handling large parts and a high part diversity. Due to the sealed guide, it is often used in rough environments. The centric clamping is realized via the synchronization of the two toothed racks with a gear wheel.
Advantages
-High gripping force with simultaneously high jaw stroke by means of double-acting pressure pistons
-High torque support for using long gripper fingers by means of robust flat guide
-Sealed for rough ambient conditions with quad-ring seal and highly precise intermediate jaws
http://eshop.roehm.biz/roehm_de_de/online-shop/automatisierungstechnik.html
The Mark 80 Series Temperature Regulator features the advanced sliding gate seat technology pioneered by Jordan Valve. Using the Jordan Valve sliding gate seat technology, the Mark 80 temperature regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Jordan Valve Mark 80 has extended temperature ranges and extremely accurate regulation. The proprietary Jorcote seat material is extremely hard (@RC85) with a low coefficient of friction that delivers outstanding performance and long service life.
Jordan Valve’s unique Seal Welded Actuator (SWA), used in conjunction with Jordan’s sliding gate seat, provides exceptional accuracy and long life in a direct operated industrial temperature regulator. The Jordan Valve Mark 80 is the most accurate and durable industrial temperature regulator available in the market today.
Spirax Sarco provides knowledge, service, products and turnkey solutions for the control and efficient use of steam, air and other industrial fluids for industrial and commercial users.
Steam Traps - All types and sizes including repair kits
Regulators - Pressure, temperature, back pressure and relief
Condensate - Pumps Electric and steam driven
Control Systems - Valves and actuators
Specialising in Pneumatic Mining and Plant EquipmentPaul Neuman
http://www.pneumax.co.za/home/products | Pneumax provides specialised Pneumatic Mining and Plant Equipment. This includes mechanical valves, valve terminals, solenoid valves, air service units, cylinders, manipulation products and more. Pneumax is also a leading supplier of Imperial Mine Cylinders and Rail Change Cylinder Devices to mines in Africa. Since 1976 Pneumax has supplied the pneumatic and automation industry with quality components.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
This brochure intends to describe functions and possible applications for electric actuators, actuator controls and gearboxes. The document offers an introduction into the topic, an overview on products and founded explanations regarding design and function of electric AUMA actuators. On the rear pages of this brochure, you will find a chapter with detailed technical data
for swift product selection. For device selection, further information can be obtained from our separate product specific data sheets.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
Fire Pro is a manufacturer of premium fire fighting equipment built specifically for the industrial, municipal, wild-land, and marine markets. We carry and extensive array of monitors, nozzles, and hydrants for multiple applications and can also field requests for custom orders.
The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within
a very narrow temperature band.
2-JAW PARALLEL GRIPPER
Equipped with two parallel gripper fingers, RÖHM grippers are optimally suited for universal gripping of round and angular workpieces. Especially on robots or portals, the 2-jaw parallel grippers will convince you with their compact design, low own weight and high gripping force.
Advantages
- High gripping force with low own weight and compact design
- Maximum flexibility thanks to versatile connection and fastening options
- Long service life and high reliability thanks to specially ground base jaws in proven T-slot guide
3-JAW CENTRIC GRIPPER
Equipped with three centrically arranged gripper fingers, RÖHM RZP grippers are optimally suited for universal and self-centering gripping of round workpieces. Especially on robots or portals, the 3-jaw centric grippers will convince you with their compact design, low dead weight and high gripping force.
Advantages
-High gripping force with low dead weight and compact design
-Maximum flexibility thanks to versatile connection and fastening options
-Long service life and high reliability thanks to specially ground base jaws in proven
T-slot guide
2-JAW LONG STROKE GRIPPER
The 2-jaw long stroke gripper allows for large jaw strokes, thanks to its design, and is therefore optimally suited for handling large parts and a high part diversity. Due to the sealed guide, it is often used in rough environments. The centric clamping is realized via the synchronization of the two toothed racks with a gear wheel.
Advantages
-High gripping force with simultaneously high jaw stroke by means of double-acting pressure pistons
-High torque support for using long gripper fingers by means of robust flat guide
-Sealed for rough ambient conditions with quad-ring seal and highly precise intermediate jaws
http://eshop.roehm.biz/roehm_de_de/online-shop/automatisierungstechnik.html
The Mark 80 Series Temperature Regulator features the advanced sliding gate seat technology pioneered by Jordan Valve. Using the Jordan Valve sliding gate seat technology, the Mark 80 temperature regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Jordan Valve Mark 80 has extended temperature ranges and extremely accurate regulation. The proprietary Jorcote seat material is extremely hard (@RC85) with a low coefficient of friction that delivers outstanding performance and long service life.
Jordan Valve’s unique Seal Welded Actuator (SWA), used in conjunction with Jordan’s sliding gate seat, provides exceptional accuracy and long life in a direct operated industrial temperature regulator. The Jordan Valve Mark 80 is the most accurate and durable industrial temperature regulator available in the market today.
Spirax Sarco provides knowledge, service, products and turnkey solutions for the control and efficient use of steam, air and other industrial fluids for industrial and commercial users.
Steam Traps - All types and sizes including repair kits
Regulators - Pressure, temperature, back pressure and relief
Condensate - Pumps Electric and steam driven
Control Systems - Valves and actuators
Specialising in Pneumatic Mining and Plant EquipmentPaul Neuman
http://www.pneumax.co.za/home/products | Pneumax provides specialised Pneumatic Mining and Plant Equipment. This includes mechanical valves, valve terminals, solenoid valves, air service units, cylinders, manipulation products and more. Pneumax is also a leading supplier of Imperial Mine Cylinders and Rail Change Cylinder Devices to mines in Africa. Since 1976 Pneumax has supplied the pneumatic and automation industry with quality components.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
This brochure intends to describe functions and possible applications for electric actuators, actuator controls and gearboxes. The document offers an introduction into the topic, an overview on products and founded explanations regarding design and function of electric AUMA actuators. On the rear pages of this brochure, you will find a chapter with detailed technical data
for swift product selection. For device selection, further information can be obtained from our separate product specific data sheets.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Kinetrol Rotary Actuator Catalog March 2018Kinetrol USA
Kinetrol rotary actuators used for operation or positioning of ball, butterfly and plug valves, ventilation dampers and automatic doors. Uses also include movement and positioning of components during manufacture - in fact anything that needs to be turned through 90° or less, automatically or by remote control.
Most recent version of Kinetrol catalog including Blueline coating for foodservice applications. Kinetrol rotary vane actuators are used to operate or position ball, butterfly and plug valves, ventilation dampers and automatic doors. Uses also include movement and positioning of components during manufacture - in fact anything that needs to be turned through 90° or less, automatically or by remote control.
A rugged, corrosion-resistant pneumatic vane actuator with only a single moving part, the Kinetrol vane actuator is warranted to operate trouble-free for four million cycles.
This is the Kinetrol Vane Actuator general product catalog, which includes pneumatic actuators, spring return units, positioners, indicators, limit switches, solenoid valves, and other valve actuation equipment.
More clearance, more power, more possibilities:
with a spindle distance of 1400 mm, a powerful counter spindle which also allows 4-axis machining, a B-axis with a direct drive for complex 5-axis simultaneous milling operations and all proven, high-quality features of the Hyperturn series, the Hyperturn 65 Powermill-G2 is a powerful addition to every machine range.
ROEHM POWER CHUCKS I CYLINDERS I STEADY RESTSRÖHM GmbH
POWER CHUCKS WITH THROUGH-HOLE
RÖHM power chucks with through-hole are successfully used both in bar and pipe machining, as well as in the machining of flange-type workpieces. The proven wedge system allows maximum clamping forces with maximum clamping precision at the same time. The rigidity of the power chucks which contributes to this is achieved with a sturdy chuck construction.
Advantages
-Large through-hole optimal for bar machining
-Proven power chucks with long service life
-Wedge hook system for high load capacity and clamping precision
POWER CHUCKS WITHOUT THROUGH-HOLE
The RÖHM power chucks without through-hole have already been used for decades and have proven themselves many times over in various clamping tasks. Thanks to the wedge hook system as well as the rigid chuck construction, the power chucks achieve a high load capacity and clamping precision along with a long service life.
Advantages
-Proven power chucks with long service life
-Wedge hook system for high load capacity and clamping precision
-Simple setup as basis for a wide range of applications
POWER CHUCKS WITH QUICK-ACTING JAW CHANGE
Fast jaw change, high clamping precision and high clamping force characterize the power chucks DURO-NCSE and DURO-NC. Thanks to the quick-acting jaw change system, the jaws can be flexibly offset, turned or changed. The clamping precision of the chuck is always retained.
Advantages
-Flexible use thanks to quick-acting jaw change reducing set-up times
-Secure jaw lock via the safety key
-Large through-hole optimal for bar machining
http://eshop.roehm.biz/roehm_de_de/online-shop/kraftspannfutter-zylinder-lunetten.html
Atuador normalizado DSBC
Cilindro de perfil normativo de acordo com ISO 15552 com uma vasta variedade de opções de montagem.
ISO 15552 (ISO 6431, VDMA 24562)
O amortecimento pneumático auto-ajustável da posição final aconomiza tempo durante o comissionamento e se adapta, de forma ideal, às mudanças de carga e velocidade
Perfil padrão com duas ranhuras do sensor
Grande oferta de variantes para utilização individual
Acessórios de fixação abrangentes para quase todas as situações de instalação
Para detecção de posição
Versões recomendadas para sistemas de produção de fabricantes de baterias de íon de lítio
KEY BAR CHUCK WITH QUICK-ACTION JAW CHANGE SYSTEM
The RÖHM key bar chucks with quick-acting jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required. Thanks to the quick-acting jaw change system, the jaws can be quickly and easily turned, changed or offset over the entire clamping range within a few seconds.
Advantages
- Maximum clamping forces thanks to direct force transfer via the key bar system
- Maximum concentricity and axial run-out tolerance
- High user-friendliness thanks to quick-acting jaw change System
GEARED SCROLL CHUCKS
The RÖHM geared scroll chucks have proven themselves a thousand times over and have already been used successfully on lathes, rotary tables and dividing attachments for decades. The jaws can be adjusted over the entire clamping range in order to be able to very quickly clamp workpieces with a wide clamping diameter range without offsetting the jaws.
Adtantages
- Quick jaw adjustment over the entire clamping range
- Proven chuck with optimal price/performance ratio
- Protection of the machine spindle by means of splash-water edge
INDEPENDENT CHUCKS
Independent chucks from RÖHM are particularly successful and effective when force has top priority.
Due to the increased rigidity and optimal wear behavior, they are especially suitable for the Initial machining of irregular, regular and round workpieces and make high machining forces and a longer machine service life possible.
Advantages
- Safe and easy clamping of irregular, regular, as well as round workpieces by four
independently adjustable jaws
- Easy rough centering by means of concentric rings on the chuck body
- Direct force transfer through radially arranged threaded spindles
http://eshop.roehm.biz/roehm_de_en/online-shop/drehfutter-planscheiben.html
We at Cosmos Pumps are on a mission to be the number one choice for all dewatering needs across the globe. And we are fulfilling this need by manufacturing state of the art dewatering pumps and providing top-notch sales, rental and turnkey services of dewatering pumps all over.
Solutions de manutention des poudres
Manutention des pulvérulents
Equipement de manutention
Manutention poudre
Manutention poudres
Manutention produit vrac
Manutention vracs
Process poudre
Technologies manutention poudre
Process industriels traitant des poudres
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
3. We put you in the best position
We have developed the rotary actuators presented
here, which have proven their worth through many
years of use, especially for fittings, butterfly valves
and ball valves.
The highest safety and quality demands as well as
longevity and precision are typical features of HKS ro-
tary actuators. Our strengths also include ATEX, DIN
standards or special customised solutions.
Wherever materials need to be rotated and tilted, pre-
cisely accelerated, braked, positioned and held, HKS
products are there to help you get the job done – with
great precision and endurance. We see the “made
in Germany” seal as the highest standard and the
yardstick for the quality of our products at the same
time. Innovation is an integral part of everything we
do, which is an advantage for you, as with HKS pro-
ducts you can always be sure of working with state-
of-the-art technology. HKS has its own development
department and manufactures practically every part
in-house, enabling us to provide you with everything
you need in outstanding quality.
The outstanding quality of our rotary actuators is in-
ternationally recognised and based on our innovative
developments, the use of best-quality materials, and
production with utmost precision. We achieve opti-
mum results for use all sectors.
We Turn the
World for
You
33
4. Typical
applications
Water works
Sewage works
Steel constructions for hydraulic engineering
Drinking water distribution
Chemicals and pharmaceuticals industry
HVAC industry
Shipbuilding
Steel mills
Food industry
Geothermal power plants
Solar thermal power plants
Biogas power plants
Power plants (water, coal, gas, oil, atomic)
Exploration, offshore facilities
Refineries
Pipelines
Tank farms
4
5. The oil pressure which is supplied through connections P1
and P2 causes a rotary movement on the actuator shaft.
The linear movement of the piston C is converted into a
rotary movement by means of multiple gears. (Sectional
representation as from the series SA-H 125)
Schutzvermerk DIN
ISO 16016 beachten
Zul. Ab
DIN
27
-m-T
Oberfl. Reihe 3
DIN 3141/
DIN ISO 1302
HKS Unternehmensgruppe
Leipzigerstrasse 53-55
D-63607 Wächtersbach
Index Änderung Datum Name Ursprung:
Datum Na
Gezeichnet
Kontrolliert
14.11.2012 Ke
A Teilkreis 25.04.12 Kern
-0,1
+0,1
Kanten
gebrochen
HKS
P1 P2
C G2 G1
Functional description
With pressure at P1 the actuator shaft rotates, from
the basic position to the left (anti clockwise). Chan-
ges in the direction can be especially made to order.
55
6. Certification: ATEX - Ex II2G EEx d IIB T4
Protection cat: IP 65
Temperature range: -25 to +55°C
Position accuracy: < 2% of full scale
Power-up time: ≤ S3-10%
Functions:
OPEN / CLOSE
Positioning
Fail Safe hydraulically (storage)
Fail Safe mechanically (spring)
Industrial automation means efficiency
The newly developed electrohydraulic actuators for fittings
satisfy these high requirements on flexible, automated in-
dustrial fittings. The sturdy, compact and modular design
offers ideal solutions for special requirements
› Oil and gas
› Chemicals and petrochemicals
› Energy and water industry
Part-turn
actuator
Electro-hydraulical
Your customer benefits
› Compact design
› Integrated safety functions
› Low installation and operating costs
An installation with no piping, the use of top-quality
components and a 100% functional test vouch for
the operational safety and reliability of these systems.
The pressure-resistant encapsulation of all electrical
components in one housing also allows their use in
potentially explosive areas (ATEX) and at the same
time guarantees a high degree of protection under
extreme working conditions:
› Explosion protection
› High reliability
6
7. up to 160 bar
Nm
up to 16.000 Nm
up to 360°
Lift up to 1,200mm
Lifting power up to 360,000 N
Tensile force up to 180,000 N
Higher lifting power and tensile force on request
In the series with the linear unit in front of the rotary
actuator (DHK-H-ZV) the lifting cylinder and rotary
actuator are connected by flanges.
The spline toothing on the drive shaft of the rota-
ry actuator interlocks with the bore of the lifting
cylinder‘s piston rod.
The spline and bore are manufactured with a corre-
sponding length or depth depending on the length
of stroke. The drive shaft with two opposite feather
keys is located at the end of the piston rod.
The lifting and turning movements can be carried out
synchronously or separately. An exact positioning of
the movements can be achieved with accessory parts.
Rotary lift
combination
Plug valves / Electro-hydraulical
7
8. Hand pump
From SA-H 55 to SA-H 140
Torque up to 7.000 Nm
Protection cat: IP 68
Aggregat: ZB 1632, compl. version for
double and single acting actuators
Power-up time: S3 10 %
Delivery volume: 0.4 l/min
Absorption: 400 cm³
Electromotor: 230 VA C one phase with
operation condenser
Emergency operation
E Box
Electronically / hydraulically controlled
Type GL290-25
Tank capacity: 2.2 l (optional with 4 l)
Delivery: 25 cm³
Working pressure up to: 180 bar
Weight: 7,5 kg
Material: Aluminium pump head, casted
aluminium tank
Functions:
Open/close
Positioning
Powerpack
Hydraulic
8
10. up to 210 bar
Nm
up to 250.000 Nm
up to 90° ±1
Temperature range: -10°C to 75°C
Protection cat: IP 65 / IP 68
› ISO 5211 Flange and additional standard and
special flanges possible
› Emergency operation
› Special angle possible
› Ability to position precisely
› Safe, stable and compact housing design in
nodular graphite iron
› Floating time fail-safe open/closed: <1 sec.
(depending on the size of the actuator)
› Certification: ATEX, SIL2
› Seals: PU / NBR / Viton
› Power-up time: S1 100 %
› Hydraulic fluid: HLP DIN 51524 HFC and HFD
possible on request
› low maintenance
› Materials: steel, nodular graphite iron, stainless
steel on request
More features
SA-H1
Solo Part-turn actuator (Helical
principle)
Typical features
› Small dimensions
› All sliding surfaces are hardened
machine-ground and polished
› Identical torque in both directions
› Interchangeable types of mounting
› No Internal leakage so that intermediate
positions can be exaclty maintained
› Variable positioning of the drive shaft
› Interchangeability of all components
› Suitable for almost all pressure media
› Endposition cushioning for all
movement is possible
10
11. › ISO 5211 Flange and additional standard and
special flanges possible
› Emergency operation
› Special angle possible
› Ability to position precisely
› Safe, stable and compact housing design in
nodular graphite iron
› Floating time fail-safe open/closed: <1 sec.
(depending on the size of the actuator)
› Certification: ATEX, SIL2
› Seals: PU / NBR / Viton
› Power-up time: S1 100 %
› Hydraulic fluid: HLP DIN 51524 HFC and HFD
possible on request
› low maintenance
› Materials: steel, nodular graphite iron, stainless
steel on request
More features
SA-H2
Solo Part-turn actuator (Helical
principle)
up to 125 bar
Nm
up to 10.000 Nm
up to 90° ±1
Temperature range: -10°C to 75°C
Protection cat: IP 65 / IP 68
Face mounting
› Sealing material from reputable manufacturers
› High-quality and high-tensile materials are used
› Piston end position can be indicated
by proximity switches
› Various auxiliary attachments available
› Angle of rotation can be indicated by
digital or analog angle sensor
› Special requests to your satisfaction
› Short delivery periods
› Favourable price-performance ratio
11
12. up to 350 bar
Nm
up to 38.000 Nm
Spring reset single-acting
Opening moment up to 38,000 Nm
Closing moment up to 7,000 Nm
Safety function through spring reset
Part-Trun actuator spring return
You can still obtain our part-turn actuators pro-
vided with a spring return. These have been
designed for operation in a one-sided hydraulic
system. The part-turn actuator normally opens
the closed armature by hydraulic pressure and
it closes with a spring return. The opposite is
achieved with appropriate assembly. Depen-
ding on the assembly the ‘open’ or ‘closed’
position can be maintained. Specific customer
requirements are taken into account here.
AFR
Hydraulic / Spring Return
› ISO 5211 Flange and additional standard and
special flanges possible
› Emergency operation
› Special angle possible
› Ability to position precisely
› Certification: ATEX, SIL2
› Seals: PU / NBR / Viton
› Low maintenance
› Protection cat: IP 65 / IP 68
› Hollow Shaft squars
› Hollow Shaft double
› Hollow Shaft 1 feather key slot
› Hollow Shaft 2 feather key slots
More features
12
14. Rack and Pinion actuators
Typical features of Rack
and Pinion actuators
› Maximum torque
› Short axial overall length
› Very short angle play
› Extremely study
14
15. up to 200 bar
Nm
up to 40.000 Nm
up to 720°
Flange or foot fixing
up to 200 bar
Nm
up to 60.000 Nm
up to 360°
Flange or foot fixing
up to 200 bar
Nm
up to 350.000 Nm
up to 360° (bigger on request)
Flange or foot fixing
DZK
DEK1
DEK
15
16. Typ SA-H
Pmax
=210bar
30 42 55 63 80 100 125
Mnom
/Pworking Nm/bar
0,3 0,95 2,1 3,0 7,2 14,7 22
Absorbtion volume cdm 0,009 0,022 0,038 0,081 0,164 0,366 0,484
Weight kg 5,6 6,9 8,2 12,0 20,6 27,7 47,0
B mm 70 114 124 128 150 178 222
0 mm 11 18 18 25 25 31 37
P mm 99 137 159 187 216 252 285
P1
mm 114 157 179 208 236 272 305
S " G1/8 G1/8 G1/4 G1/4 G3/8 G3/8 G3/8
T mm 10 15 20 25 25 25 25
N mm 10 15 15 15 15 15 15
I mm 6 12 17 17 22 22 22
HWP X1H7
(max.)
mm 12 18 20 22 30 42 55
mm* 12 18 18 22 28 42 50
X2 mm 4 6 6 6 8 12 16
X3 mm 7,8 11,8 12,8 12,8 18,3 24,3 31,8
HX
mm 31 39 45 45 75 100 120
mm 30 35 45 45 65 80 110
HWV SW V (max.)
mm 12 17 18 22 27 36 50
mm* 11 17 17 22 27 36 46
HV
mm 34 34 45 45 50 50 50
mm 16 19 24 29 38 48 48
HWZ SW Z (max.)
mm 10 12 14 17 22 30 36
mm* 9 11 14 17 22 27 36
Z1 mm 17 24 25 25 36 50 71
HZ
mm 34 34 45 48 50 64 64
mm* 19 30 34 48 48 64 64
*) Dimensions acc. DIN ISO 5211
Ansicht/ view X
NP
*
*
BT P1
HX,HV o. HZ
I
O
*
x,v
o. Z
X
S
*
Ansicht/ view X
NP
*
BT P1
I
O
*
X
S
Mark
open / closed
Technical
data
View
16
17. 140 160 180 200 225 225S 250 280 300
30 50 71 100 142 175 200 275 350
0,719 1,099 1,626 2,179 3,271 4,039 4,532 6,268 7,843
74,0 114 150 194 354 462 551 764 1100
250 278 298 325 385 385 450 490 555
40 43 45 54 64 64 90 100 110
304 365 435 440 570 690 710 790 840
324 385 455 460 590 710 730 810 860
G3/8 G3/8 G1/2 G1/2 G3/4 G3/4 G1 G1 G1
25 25 25 30 40 45 50 50 50
15 15 15 15 15 15 15 15 15
22 22 22 22 22 22 22 22 22
60 75 75 95 100
100 110 120 140
60 72 72 80 98
18 20 20 25 28 28 28 32 36
34,4 42,4 42,4 52,9 56,4 56,4 61,4 67,4 78,4
120 150 150 175 175
175 175 200 200
110 130 130 180 180
50 67 75 82 82
82 95 104 120
46 55 75 75 75
57 60 60 77 77
75 85 90 100
57 57 57 77 77
41 55 55 65 75
70 80 85 95
36 55 55 55 75
71 95 95 116 116 116 135 138 170
64 64 82 82 82
75 85 90 100
64 64 82 82 82
Various connection
Ansicht/ view X
NP
*
*
BT P1
HX,HV o. HZ
I
O
*
x,v
o. Z
X
S
*
C
NP
*
T P1
O
X
S
Emergency operation
HWP
with 2 feather key slots DIN 6885
HWP 1
with 1 feather key slot DIN 6685
HWV
ISO-Square DIN 475T1
HWZ
ISO-Double DIN 475T1
Hole pattern for valve assembly. Adapter plate
or direct assembly on request.
SW
V
SW V SW Z
X3
X2
ØX1
ØZ1
X3
X2
ØX1
SW
V
SW V SW Z
X3
X2
ØX1
ØZ1
X3
X2
ØX1
SW
V
SW V SW Z
X3
X2
ØX1
ØZ1
X3
X2
ØX1
SW
V
SW V SW Z
X3
X2
ØX1
ØZ1
X3
X2
ØX1
17
18. 350
700
1050
1400
1750
2100
500
175
350
700
875
1050
300
0
105
210
315300315300
420
525
630
210 bar100 bar
210
0,0
73
147
220210220210
294
367
441
210 bar100 bar
95
0
33
66
1009510095
133
166
200
210 bar100 bar
30
0
10
21
42
52
63
210 bar100 bar
3000
0
1050
2100
3150
4200
5250
6300
210 bar100 bar
2200
0
770
1540
2310220023102200
3080
3850
4620
210 bar100 bar
1470
0
514
1029
1543
2058
2572
3087
210 bar100 bar
962
1925
2887
3850
4812
5775
1750
612
1225
2450
3062
3675
720
0
252
504
756
1008
1260
1512
210 bar100 bar
300
0
105
210
420
525
630
210
0,0
73
147
294
367
441
210 bar100 bar
95
0
33
66
133
166
200
30
0
10
21
31303130
42
52
63
210 bar100 bar
0
1050
2100
3150
4200
5250
6300
2200
0
770
1540
3080
3850
4620
210 bar100 bar
0
514
1029
1543
2058
2572
3087
0
252
504
756
1008
1260
1512
210 bar100 bar
*at 210 bar (0,3 Nm/bar)
Nm
Nm
Nm
Nm
Nm
Nm
Nm
Nm
Nm
*at 210 bar (7,2 Nm/bar)
*at 210 bar (0,95 Nm/bar)
*at 210 bar (14,7 Nm/bar)
*at 210 bar (2,1 Nm/bar)
*at 210 bar (22 Nm/bar)
*at 210 bar (3 Nm/bar)
*at 210 bar (30 Nm/bar)
SA-H
63
SA-H140
SA-H
55
SA-H125
SA-H100
SA-H
30
SA-H
80
SA-H
42
Nom. torque
to working pressure of the series
SA-H 30 to SA-H 300
18
19. *max. nom. torque
14200
0
4970
9940
14910142001491014200
19880
24850
29820
210 bar100 bar
10000
0
3500
7000
10500
14000
17500
21000
210 bar100 bar
7100
0
2485
4970
7455710074557100
9940
12425
14910
210 bar100 bar
5000
0
1750
3500
5250500052505000
7000
8750
10500
210 bar100 bar
210 bar
210 bar
210 bar
210 bar
35000
0
12250
24500
36750
49000
61250
73500
210 bar100 bar
27500
0
9625
19250
28875
38500
48125
57750
210 bar100 bar
20000
0
7000
14000
21000
28000
35000
42000
210 bar100 bar
17500
0
6125
12250
18375175001837517500
24500
30625
36750
210 bar100 bar
*at 210 bar (50 Nm/bar)
Nm
Nm
Nm
Nm
Nm
Nm
Nm
Nm
*at 210 bar (175 Nm/bar)
*at 210 bar (71 Nm/bar)
*at 210 bar (200 Nm/bar)
*at 210 bar (100 Nm/bar)
*at 210 bar (275 Nm/bar)
*at 210 bar (142 Nm/bar)
*at 210 bar (350 Nm/bar)
SA-H225
SA-H300
SA-H200
SA-H280
SA-H180
SA-H250
SA-H160
SA-H225S
19
20. Order Code
Ød1 Ød2 f8 Ød3 Ød4 hmax Torque
Typ [mm] [mm] [mm] [mm] [mm] [Nm]
F03 46 25 36 M 5 2 32
F04 54 30 42 M 5 2 63
F05 65 35 50 M 6 3 125
F07 90 55 70 M 8 3 250
F10 125 70 102 M 10 3 500
F12 150 85 125 M 12 3 1000
F14 175 100 140 M 16 4 2000
F16 210 130 165 M 20 5 4000
F25 300 200 254 M 16 5 8000
F30 350 230 298 M 20 5 16000
F35 415 260 356 M 30 5 32000
F40 475 300 406 M 36 8 63000
F48 560 370 483 M 36 8 125000
F60 686 470 603 M 36 8 250000
A-A
B (1 : 1)
B
Maßstab: Gewicht: -
Werkstoff:
Benennung:
Artikelnummer 2: Artikelnummer:
Flansch DIN ISO
5211
Blatt
A3
CAD-Nr:.C:Usersc.eichenauerDesktopKatalogFlansch DIN ISO 5211.idw
1 /1
Schutzvermerk DIN
ISO 16016 beachten
Zul. Abweich.
DIN ISO
2768
-m-T1 T2
Oberfl. Reihe 3
DIN 3141/
DIN ISO 1302
HKS Unternehmensgruppe
Leipzigerstrasse 53-55
D-63607 Wächtersbach
Index Änderung Datum Name Ursprung:
Datum Name
Gezeichnet
Kontrolliert
12.11.2012 Eichenauer
Projektions-
methode 1
C45
-0,1
+0,1
Kanten
gebrochen
R
HKS
Ød 2Ød 4
Ød 3
Ød 1
h2
h1
Ød 4
Part-turn actuator
The operating pressures may have to be adjusted in
accordance with p. 16/17.
SA-H
SA-H V1
A90° EB63
30
V2
42 V11
280 D
HWP
EB
HWV
NO
300
90°
E
HWP1
EM
HWZ
NI
A
ND
S
NOHWP D V1
Valve
attachment
SA-H and AFR for fittings DIN ISO
5211* (dimensions of flange)
Size
Part-tum actuator
Angle
Hollow shatt 2 feather
key slots
Hollow shaft 1 feather
key slot
Hollow shaft squars
Hollow shaft double
Emergency op.
Cushioning
Bleeding
Hydr. op.
controll unit
Elec. box
Mechanical limit switch
Cam
lnd. proximity switch
Ind. press. prof prox. switch
Customized solution
20
21. C-C
D (1 : 2)C
C
D
Maßstab: Gewicht: -
Werkstoff:
Benennung:
Schwenkantrieb
SA-H 100 90° A,HWP,F10,EM S1758
Artikelnummer 2: Artikelnummer:
251009001758 1002885
Blatt
A3
CAD-Nr:.C:Usersc.eichenauerDesktopKatalogS1758.idw
1 /1
Schutzvermerk DIN
ISO 16016 beachten
Zul. Abweich.
DIN ISO
2768
-m-T1 T2
Oberfl. Reihe 3
DIN 3141/
DIN ISO 1302
HKS Unternehmensgruppe
Leipzigerstrasse 53-55
D-63607 Wächtersbach
Index Änderung Datum Name Ursprung:
Datum Name
Gezeichnet
Kontrolliert
14.07.2009 T.Simon
Projektions-
methode 1
-0,1
+0,1
Kanten
gebrochen
R
HKS
Maßstab: Gewicht: -
Werkstoff:
Benennung:
Schwenkantrieb
SA-H 63 90° A,Vk17,F05,Ni S5238
Artikelnummer 2: Artikelnummer:
250609005238 1053691
Blatt
A3
CAD-Nr:.C:Usersc.eichenauerDesktopKatalogS5238.idw
1 /1
Schutzvermerk DIN
ISO 16016 beachten
Zul. Abweich.
DIN ISO
2768
-m-T1 T2
Oberfl. Reihe 3
DIN 3141/
DIN ISO 1302
HKS Unternehmensgruppe
Leipzigerstrasse 53-55
D-63607 Wächtersbach
Index Änderung Datum Name Ursprung:
Datum Name
Gezeichnet
Kontrolliert
04.04.2012 D.Popov
Projektions-
methode 1
-0,1
+0,1
Kanten
gebrochen
R
HKS
C (1 : 1,5)
Maßstab: Gewicht: -
Werkstoff:
Benennung:
Schwenkantrieb
SA-H 80 90° HWV14,F10,SWZ,E-Box S5239
Artikelnummer 2: Artikelnummer:
250809005239 1053715
Blatt
A3
CAD-Nr:.C:Usersc.eichenauerDesktopKatalogS5239.idw
1 /1
Schutzvermerk DIN
ISO 16016 beachten
Zul. Abweich.
DIN ISO
2768
-m-T1 T2
Oberfl. Reihe 3
DIN 3141/
DIN ISO 1302
HKS Unternehmensgruppe
Leipzigerstrasse 53-55
D-63607 Wächtersbach
Index Änderung Datum Name Ursprung:
Datum Name
Gezeichnet
Kontrolliert
18.04.2012 D.Popov
Projektions-
methode 1
-0,1
+0,1
Kanten
gebrochen
R
HKS
Mechanical Iimit switch (EM)
E-Box
Potentiometer
Ind. proximity switch (NI)
Inductive proximity switch
Combination of inductive
proximity switch and
potentiometer in an E-Box
Potentiometer
Options
for part-turn actuators
for SA-H and AFR
The versions shown are only a few possibilities of the
options with which HKS part-turn actuators can be
provided. Our engineers will be pleased to advise you.
21
22. Choice of
VF
or
VH
VE
VD
VI
VC VG
VB VB
VA
VG
TP A B
VF
VH
VH W W VF
VE
VD
VI
VC
VB
VA
VA
B B
B B
A A
A A
T T
TP
P P
Hydraulically operated
controll unit
Coverplate
Choice of
-electrical NG6-valve
-manual NG6-valve
Hand-pump
Hydr. released
non-return valve
One-way restrictor valve
- for adjusting the
turning speed
Short-circuit valve
- connects A and B for
mech. adjustment
of the actuator shaft
Hydr. emergency operation
Base
3/8“ BSP Shut T A 3/8“ BSP Connection
3/8“ BSP Connection A B 3/8“ BSP Connection
3/8“ BSP Shut P B 3/8“ BSP Connection
3/8“ BSP Connection T
3/8“ BSP Connection P
22
23. The part-turn actuarors can be operated by an ex-
ternal pump aggregate or a hand-pump. Both of
these applications are also possible if the hand pump
is intended for emergency operation. By operating
through an external aggregate there are two possi-
bilities available.
1. The valves are attached to the aggregate
2. All controlls are attachad to the part-turn actuator
In case 1, connection of the hydraulic pipes is made
by the connections A and B. A causes “turning to the
left”, B. “turning to the right”, when looking at the
shaft spigots. In addition to the base VA, the cover-
plate VG is required.
In case 2 a ring pipe for P and T from the pump ag-
gregate can supply all actuators, when using several
part-turn actuators. Here the pipes for A and B from
the aggregate to each part-turn actuator are not re-
quired. The connection of the pipes is at P and T in
the base VA.
If required the different linked blocks can be com-
bined as a vertical link.
Possibilities of attachmant for A and B:
› Hydraulic emergency operation V1=VA+VB+VG
An additional external pump can be joined either by a screw or a quick-closing coupling to the part-turn actuator.
› Mechanical emergency operation V2=VA+VC+VG
The shaft can be turned with a square key when the valve is open.
› Hydraulic and mechanical emergency operation V3=VA+VB+VC+VG
› Emergency operation with a hand-pump V4=VA+VB+VC+VG
› All possibilities V5=VA+VB+VC+VD+VE+VF+VI / V5A=VA+VB+VC+VD+VE+VH+VI
Possibilities of connections for P and T:
› Hydraulic emergency operation V6=VA+VB+VF / V6A=VA+VB+VH
An additional extemal pump can be joined by a screw or a quick-closing coupling to
the part-turn actuator. (pay attention to the right 4/3 directional valve)
› Mechanical emergency operation V7=VA+VC+VF / V7A=VA+VC+VH
The shaft can be turned with a square key when the valve is open.
› Hydraulic and mechanical emergency operation V8=VA+VB+VC+VF / V8A=VA+VB+VC+VH
› Emergency operation with a hand-pump V4=VA+VD+VE+VF / V4A=VA+VD+VE+VH
› All possibilities V5=VA+VB+VC+VD+VE+VF+VI / V5A=VA+VB+VC+VD+VE+VH+VI
23
24. Installation and initial operation
The drive shaft is to be aligned properly to the
counterpart to avoid exceeding the permissible
axial and radial forces. Before initial operation the
hydraulic system is to be carefully cleaned and bled.
Pressure fluid
Mineral oils in the group HLP DIN 51524 / Part 2
and VDMA Sheet 24318 are recommended. It must
be borne in mind that the viscosity is between
15 mm²/s (cSt.) and 250 mm²/s (cSt.). Hydraulic
oils HLP 16 to HLP 46 meet these conditions.
Viscosities above and below the required viscosity
in the applicable temperature range may result in
increased wear.
Flame-resistant hydraulic fluids or bio oils (HFA, HFC
and HFD) may only used with our written approval.
Filtration
It is recommended that the pressure fluid be filtered
between the pump and rotary actuator (pressure
pipe). The hydraulic unit must supply the rotary
actuator with a guaranteed oil purity according to
NAS 1638 – NAS Class 7. Recommendation filter
element: 16 VG. Purity class recommendation: ISO
4406: 1999 (22/18/14).
Operating
instruction
Tightening torques for cheese head
screws DIN EN ISO 4762 (12.9 +
Schnorr)
On stainless screws are tightening torques’s from
the manufacture to inquire. All screws must be
lubricated.
Oilchange
A change of hydraulic oil is required and depends
on the size of the system. In smaller systems an
oil change is required at correspondingly shorter
intervals. If the hydraulic fluid is contaminated it
must be changed immediately.
Oil replacement
In the case of long oil pipes, there should be a
guarantee that 50% of the displacement will be
replaced for one complete slewing movement.
Temperature range
-10°C to +75°C
If the thermal load is higher or lower than this
range, consult the factory
Before installation
Fit the screw connections with the correct
tightening torques. Otherwise the loading capacity
of the connection will be reduced. If this is the case
the connection will loosen.
24
25. HKSDreh-AntriebeGmbH®
•63607Wächtersbach-Aufenau•Germany•fax:+4960536163-639
Company: Tel.:
Name: Fax.:
Street: E-Mail:
Code / City: Web:
Project: Commission: Responsible: Date:
1 Type of valve Ball valve Flaps Other ________________
2 Various connection HWP
X3
X2
ØX1
HWP 1
X3
X2
ØX1
HWV
SW V
HWV
SW
V
HWZ
SW Z
ØZ1
2.1 Dimensions ØX1: X2: X3: SW V: SW Z: ØZ1:
3 ISO-Flange with screw:
F03
F04
F05
F07
F10
F12
F14
F16
F25
F30
F35
F40
F48
F60
with through hole:
3.1 Alternative Flange (Please attach a drawing)
4 Required nom. torque M Nm
5 Part-turn angle °
5.1 Part-turn time t s
5.2 Cycles Z day/week
6 Hydraulic plant
6.1 Effective working pressure p1 bar
6.2 Max. perm. system pressure p2 bar
6.3 Flow rate Q l/min.
6.4 Plant temperature TA °C
6.5 Surrounding temperature TU °C
6.6 Medium used
7
Special conditions of use
8
Conditions at working place
9
Necessary properties of part-turn
actuator
10 Additional equipment required
Emergency operation Cushioning
Mechanical limit switch Adjustment of the rotation angle
Induced pressure proof proximity switch Hydraulically operated control unit
Induced proximity switch SIL II
Electrical-box ATEX Class: _______________________________
Bleeding Other: ____________________________________
11 Single action spring return
Spring return load N
See 1-10
12 Recommended actuator
25
26. Our highly qualified designers develop efficient HKS products for their
customers, equipped with state-of-the-art hardware and software ap-
plications. In cooperation with you as our customer and with our expe-
rienced technical customer support team, we develop high-quality HKS
products tailored to suit your needs.
26
27. Die HKS Dreh-Antriebe GmbH®
The HKS Dreh-Antriebe GmbH is one of the world‘s
leading manufacturer of rotary actuators, tilt rota-
tors, rotary lift combinations and as well rack and
pinion rotary actuators. Besides cylinders HKS distri-
butes vane actuators and since 2012 medical training
equipment. The family business, founded in 1970
currently employs approximately 190 employees at 3
sites in Germany.
With sales partners in over 20 countries, HKS Dreh-
Antriebe GmbH is internationally oriented. The pro-
portion of sales to foreign countries is over 50%.
As a family business, HKS Dreh-Antriebe GmbH at-
taches great importance to responsible and long-
term actions. Sustainability, community involvement
and health promotion of employees in the context of
numerous health actions some of the key points in
the company‘s principles.
From a logistics viewpoint the HKS Group plant 1 is
located in the centre of the EU regionally linked to
Europe’s biggest cargo airport and also within easy
reach of the biggest freight ports of Rotterdam and
Hamburg. Our plant 2 is in a strategically convenient
location for the Eastern European market.
27
28. HKS Dreh-Antriebe GmbH® • Leipziger Straße 55 • 63607 Wächtersbach-Aufenau • Germany • fon: +49 6053 6163-0 • fax: +49 6053 6163-639
www.hks-partner.com
Scan me O
G facebook.com/HKSDrehAntriebe
U twitter.com/HKSDrehAntriebe
P youtube.com/HKSDrehAntriebe
B issuu.com/hks_
Copyright 2016 HKS Dreh-Antriebe GmbH®
DIN EN ISO 9001:2008 TÜV certified
Illustrations similar. Information no liability assumed.
Subject to alteration.
Status: 10/2016