1.5 T induction furnace.docx
•Download as DOCX, PDF•
0 likes•83 views
The 1.5T medium frequency furnace is melting equipment commonly used in the foundry industry. Its rated capacity is 1.5T in steel, the melting power is generally 1000kW, and the melting speed is one furnace within 1 hour. The furnace body is tilted by hydraulic pressure or reducer, covering an area of about 10 square meters. The cooling is hsbl cooling tower.
Report
Share
Report
Share
Recommended
GW-1-750IF Induction Furnace
This document provides a quotation and technical specifications for a 1.0 ton induction melting furnace system with two furnace bodies and a 750KW intermediate frequency power source. The system includes the furnace bodies, power source cabinet, transformer, capacitor box, hydraulic system, cooling system, and other accessories. The furnace can melt material at temperatures up to 1750°C at a rate of 1.0 ton per hour with an electrical consumption of 610Kw.h per ton. The production cycle for the furnace system is 30 days.
Proposal of 1020KVA Anthracite Calcinations Furnace
This document provides information about an anthracite calcinations furnace, including costs, equipment, and production process. It details that 1.2 tons of fine coal and 800 KWh of power are needed to produce 1 ton of calcined anthracite. It also outlines the land, furnace components, transformer, and water cycling system required. Finally, it describes the project procedure, including power systems, calcination systems, water cycling, and charging/feeding systems for two 1000KVA furnaces.
Vocational training at mejia thermal power plant
This document provides an overview of the vocational training program at the Mejia Thermal Power Plant. It describes the key components and systems of a thermal power plant, including the coal handling plant, pulverizing plant, draft fans, boiler, ash handling plant, turbine, condenser, cooling tower, and switchyard. It also discusses the electrical, mechanical, and safety operations at the plant. The document is intended to educate trainees on the general layout and functions of the major equipment used in power generation at the Mejia Thermal Power Plant.
Comparison Between Imf Eaf
The document compares Electric Arc Furnace (EAF) technology and Induction Melting Furnace technology for steel production. It provides details on the operation and principles of each technology. EAF uses scrap steel and electrodes to melt steel through an electric arc, allowing for refining. Induction furnaces use electromagnetic induction to melt metal but lack refining capacity. The document then compares factors like charge materials, operational costs, environmental impacts, and investment costs to determine the most cost-effective option.
switchgear and protection,study of generator mini project tpp vizag
The thermal power plant has objectives of supplying uninterrupted cold blast, essential power, process steam, and water to the steel plant. It consumes 600-650 kWh per ton of steel and has an average power demand of 227-470 MW. Its captive power sources total 402.5 MW including a 315 MW thermal power plant. The thermal power plant contains key equipment like boilers, turbo-generators, and a water treatment plant to generate power for meeting the plant's load requirements. Protective relaying of generators is necessary to prevent failures from overvoltage, insulation breakdown, and faults, and requires speed, selectivity, sensitivity, reliability and simplicity.
NTPC,muzaffarpur
The document provides an overview of an in-plant training presentation on coal-fired power generation at Kanti Bijlee Utpadan Nigam Ltd. It describes the history and capacity of the plant, the coal handling and combustion process, steam turbine power generation, transmission systems, and synchronization of generators to the grid. Key aspects covered include the two 110MW coal-fired units, coal milling and firing, steam generation in water tube boilers, power production in high, intermediate, and low pressure turbines, and transmission at 220kV.
thermal power station
The document provides an overview of an in-plant training presentation on a coal-fired thermal power station in Kanti, Bihar, India. It discusses the history and ownership of the plant, the two-unit 110MW capacity, the coal-fired process from coal delivery to steam generation, turbine operation, and power generation. It also summarizes the generator, transmission system including the control room, and substation equipment. The synchronization process is explained in three steps regarding terminal voltage, running speed/frequency, and phase sequence matching the bus bar.
Ppt on power generation(thermal), transmission & distribution
The document provides information about electrical power generation at a thermal power plant (KTPS). It discusses the working principle, layout, main equipment, waste generated and their control, advantages and disadvantages. The main equipment discussed includes the coal handling plant, pulverizing plant, boiler, turbine, condenser, cooling towers/ponds, feed water heater, economizer, and air preheater. It also provides additional data about KTPS such as its generating capacity and types of circuit breakers used.
Recommended
GW-1-750IF Induction Furnace
This document provides a quotation and technical specifications for a 1.0 ton induction melting furnace system with two furnace bodies and a 750KW intermediate frequency power source. The system includes the furnace bodies, power source cabinet, transformer, capacitor box, hydraulic system, cooling system, and other accessories. The furnace can melt material at temperatures up to 1750°C at a rate of 1.0 ton per hour with an electrical consumption of 610Kw.h per ton. The production cycle for the furnace system is 30 days.
Proposal of 1020KVA Anthracite Calcinations Furnace
This document provides information about an anthracite calcinations furnace, including costs, equipment, and production process. It details that 1.2 tons of fine coal and 800 KWh of power are needed to produce 1 ton of calcined anthracite. It also outlines the land, furnace components, transformer, and water cycling system required. Finally, it describes the project procedure, including power systems, calcination systems, water cycling, and charging/feeding systems for two 1000KVA furnaces.
Vocational training at mejia thermal power plant
This document provides an overview of the vocational training program at the Mejia Thermal Power Plant. It describes the key components and systems of a thermal power plant, including the coal handling plant, pulverizing plant, draft fans, boiler, ash handling plant, turbine, condenser, cooling tower, and switchyard. It also discusses the electrical, mechanical, and safety operations at the plant. The document is intended to educate trainees on the general layout and functions of the major equipment used in power generation at the Mejia Thermal Power Plant.
Comparison Between Imf Eaf
The document compares Electric Arc Furnace (EAF) technology and Induction Melting Furnace technology for steel production. It provides details on the operation and principles of each technology. EAF uses scrap steel and electrodes to melt steel through an electric arc, allowing for refining. Induction furnaces use electromagnetic induction to melt metal but lack refining capacity. The document then compares factors like charge materials, operational costs, environmental impacts, and investment costs to determine the most cost-effective option.
switchgear and protection,study of generator mini project tpp vizag
The thermal power plant has objectives of supplying uninterrupted cold blast, essential power, process steam, and water to the steel plant. It consumes 600-650 kWh per ton of steel and has an average power demand of 227-470 MW. Its captive power sources total 402.5 MW including a 315 MW thermal power plant. The thermal power plant contains key equipment like boilers, turbo-generators, and a water treatment plant to generate power for meeting the plant's load requirements. Protective relaying of generators is necessary to prevent failures from overvoltage, insulation breakdown, and faults, and requires speed, selectivity, sensitivity, reliability and simplicity.
NTPC,muzaffarpur
The document provides an overview of an in-plant training presentation on coal-fired power generation at Kanti Bijlee Utpadan Nigam Ltd. It describes the history and capacity of the plant, the coal handling and combustion process, steam turbine power generation, transmission systems, and synchronization of generators to the grid. Key aspects covered include the two 110MW coal-fired units, coal milling and firing, steam generation in water tube boilers, power production in high, intermediate, and low pressure turbines, and transmission at 220kV.
thermal power station
The document provides an overview of an in-plant training presentation on a coal-fired thermal power station in Kanti, Bihar, India. It discusses the history and ownership of the plant, the two-unit 110MW capacity, the coal-fired process from coal delivery to steam generation, turbine operation, and power generation. It also summarizes the generator, transmission system including the control room, and substation equipment. The synchronization process is explained in three steps regarding terminal voltage, running speed/frequency, and phase sequence matching the bus bar.
Ppt on power generation(thermal), transmission & distribution
The document provides information about electrical power generation at a thermal power plant (KTPS). It discusses the working principle, layout, main equipment, waste generated and their control, advantages and disadvantages. The main equipment discussed includes the coal handling plant, pulverizing plant, boiler, turbine, condenser, cooling towers/ponds, feed water heater, economizer, and air preheater. It also provides additional data about KTPS such as its generating capacity and types of circuit breakers used.
A summer training presentation on national thermal power
This document provides an overview of a summer training presentation on the National Thermal Power Plant in Kahalgaon, Bihar, India. It discusses the key components and processes of a coal power plant, including: how coal is handled and burned to create steam; how the steam powers turbines which spin generators to produce electricity; and the roles of auxiliary equipment like transformers. The content is organized by the major sections of a thermal power plant and includes diagrams to illustrate key components like boilers, turbines, generators and transformers.
Ranjan NTPC KAHALGAON ppt
The document provides details about Ranjan Kumar's summer practical training at the National Thermal Power Corporation (NTPC) plant in Kahalgaon, Bihar, India. It discusses the various departments and systems at the plant including coal handling, ash handling, the boiler and turbine systems, water treatment, the cooling tower, electricity generation equipment, transformers, the switchyard, and control and instrumentation. The NTPC Kahalgaon plant has a total installed capacity of 2340 MW and uses coal from nearby mines to generate electricity through its steam turbine units.
Ramendra summer training presentation
This document provides an overview of several power plants in Delhi, India including their specifications and components. It discusses the working of gas power plants which use gas turbines and heat recovery steam generators. It also describes the water treatment plant, generators, transformers, switchyard components like circuit breakers and insulators. The specifications of various equipment are listed. Finally, it discusses the merits and demerits of gas turbine and steam power plants.
ppt on kstps 2016
The document provides an overview of the Kota Super Thermal Power Station in India. It discusses the power station's layout and key components including the coal handling plant, boiler, steam turbine, turbo generator, water treatment plant, and switchyard. The power station has a total installed capacity of 1240 MW generated across 7 units of varying sizes and commission dates. It utilizes bituminous coal sourced from local mines to power its steam-driven turbines. The document also briefly outlines the station's control room and various protection systems.
ppt on nspcl rourkela odisha
The document summarizes the author's summer training at the NSPCL power plant in Rourkela, India. It describes the key components of the plant including the coal handling plant, demineralization plant, boiler, air preheater, economizer, superheater, electrostatic precipitator, fans, condenser, cooling tower, turbines, alternator, and ash handling plant. It also discusses the switchyard equipment like isolators, transformers, circuit breakers and bus bars. The control room manages and monitors operations of the entire plant.
presentation_thermal_power.pptx
The document summarizes the key components and processes of the Kota Super Thermal Power Station in Rajasthan, India. It describes how coal is crushed and fed into boilers to produce superheated steam. The steam then rotates turbines connected to generators, producing electricity. The exhausted steam is condensed and recycled, and fly ash is captured. The power station has a total generation capacity of 1240 MW distributed across multiple stages and units.
presentation_thermal_power_plant_1447503788_165600.pptx
The document provides information about the Kota Super Thermal Power Station located in Kota, Rajasthan, India. It discusses the key processes and components of the power station, including how coal is crushed and fed into boilers to produce steam, how the steam rotates turbines connected to generators to produce electricity, and how ash is handled. The power station has a total net power generation capacity of 1240 MW produced across 5 stages using coal supplied by rail.
Mejia Thermal Power Station
The document provides an overview of the Mejia Thermal Power Station (MTPS) located in West Bengal, India. It is owned by the Damodar Valley Corporation and has a total installed capacity of 2340 MW generated from various units. The document describes the key components of the thermal power plant including the coal handling system, pulverizer, boiler, turbine, condenser, and switchyard. It also provides a step-by-step explanation of how coal is converted into electrical energy within the power station.
Thermal power plant
It's my pleasure to upload this file, I've really worked hard in creating this presentation. I Hope this File is helpful to you as well as several other pupils.
Introduction to induction heating by stead fast engineers
Introduction to induction heating by stead fast engineers. Find here Induction Furnace manufacturers,
Induction heater manufacturers,
Induction Billet heater Manufacturers,
Induction Melting furnace manufacturers,
Induction Furnace Manufacturers in India,
Induction Billet heater manufacturers in India,
Induction heating system,
Induction Melting Furnace
for your sourcing needs.
CSTPS training REPORT
MSEB was set up in 1960 to generate, transmit and distribute power to all consumers in
Maharashtra excluding Mumbai. MSEB was the largest SEB in the country. The generation
capacity of MSEB has grown from 760 MW in 1960-61 to 9771 MW in 2001-02. The customer
base has grown from 1,07,833 in 1960-61 to 1,40,09,089 in 2001-02.
C.S.T.P.S in contribution much in field of production of electricity. It is not only number
one thermal power station in Asia but also has occupied specific position on the international
map.
The first set was commission on August 1983 & was dedicated to nation by then PM
(late) Mrs. Indira Gandhi & second set commission on July 1984. The third & fourth units of
CSTPS under stage 2 were commissioned on the 3rd May 1985 & 8th March 1986 respectively.
The units 5 & 6 were commissioned on the 22nd March 1991 & 11th March 1992 respectively one
more units of 500MW was added to the CSTPS on making its generation to 2340 MW &
making “C.S.T.P.S.” as the giant in Power Generation of CSTPS.
LF ladle refining furnace.pdf
The LF ladle refining furnace is used to refine molten steel from primary furnaces through atmospheric arc heating, argon blowing and stirring, alloy feeding, temperature measurement, and sampling. It consists of a ladle and ladle car, heating device, vacuum and detection system, hydraulic and control systems, gas systems, electrical control system, and high voltage and current circuits. The LF furnace can be combined with an EBT electric furnace to achieve short processes, improve steel quality, and reduce costs. It can be customized based on a client's required capacity, working hours, power supply, raw materials, and other parameters.
rajwest thermal power plant
The document provides information about the layout and components of the Raj West Power Plant in Barmer, Rajasthan, India. The plant will be a 1080MW lignite-based thermal power plant using circulating fluidized bed combustion technology. Coal will be sourced from nearby mines through a joint venture company. The general layout and components of a thermal power plant are described, including coal handling, the boiler, turbine, generator, condenser, and ash handling. Key specifications of equipment like circuit breakers and isolators in the switchyard are also mentioned.
KTPS
The document provides information about Kolaghat Thermal Power Station located in West Bengal, India. It has six units totaling 1,260 MW capacity. The power plant uses a steam turbine process to convert the heat from burning coal into electrical energy. It describes the main equipment used including the coal handling plant, boiler, turbine, condenser, and electrical equipment like transformers and generators. The document provides technical specifications for many of the major components.
Ind lab.pptx
The document summarizes information about the Kota Super Thermal Power Plant in Rajasthan, India. It discusses the plant's history, current state, equipment including cooling towers, and future plans. The power plant began operations in 1983 with an approved capacity of 1240 Megawatts. It uses coal as its primary fuel and has seven operational units ranging from 110-210 Megawatts each. Cooling towers are mentioned as a key piece of equipment to reduce the temperature of water used in the plant. The document also notes India's future plans to reduce establishing new thermal power plants and shift to less polluting energy sources according to the country's policies.
Versohex immerssion heat exchnagers
The Versol standard range of heat exchangers are is developed to generate hot water/cold water efficiently with/without the need for storage. VERSOHEX can be used with storage tanks to heat up the stored water or can be inline in the system to produce hot/cold water directly. VERSOHEX can be in three ranges as below
VERSOHEX-IM – Immersion Heat Exchangers
VERSOHEX-PL- Plate Heat Exchangers
VERSOHEX-ST- Shell & Tube Heat Exchangers
VERSOHEX-IM Range VERSOL are specialized in the design and manufacturing of Immersion HeatExchangers for deferent applications. VERSOL Immersion Heaters are capable to fulfill customer requirements in Heating or Cooling of liquids. VERSOL offers mainly two type of Immersion Heaters. Immersion Heaters are designed to use with VERSOTHERM Calorifiers or Standard models are available to use with different Calorifiers Tanks. Material and size selection should be taken care after confirming the Calorifiers tank material and dimensions. 1. Electric Immersion Heaters (VERSOHEX-IM-ELE Range) 2. U Tube Bundle Immersion Heaters (VERSOHEX-IM-UT Range
Simulation of Induction Furnace Comparison with Practical Induction Furnace
In this paper, at first, a simulation of induction furnace model optimized resonant capacitor is designed for a practical induction furnace with parallel resonant inverter. Then rectifier and inverter snubber circuit are designed. And taken voltage, current, THD and power measured. This measured value comparison with actual working industry furnace data. and conclude that when furnace is not operate at full load that time its power factor is very low. And THD is high.
Presentation 1 (2).pptx
×
SlideShare a Scribd company logo
Search
Submit Search
Thermal power plant ppt
VIMLESH VERMA
VIMLESH VERMA
Oct. 24, 2016
•
265 likes
•
145,762 views
1 of 21
thermal power plant
Engineering
Advertisement
Recommended
Thermal power plant
SANT LONGOWAL INSTITUTE OF ENGINEERING AND TECHNOLOGY
2.2k views
•
20 slides
Thermal Power Plant
Jeegnesh Solanki
10k views
•
37 slides
Thermal Power Station
Raji Kumar
3.6k views
•
11 slides
Thermal power Plant presentation
Shahzaib Hussain
1.6k views
•
58 slides
Thermal power plant
Rahul Jalan
653 views
•
29 slides
Power plant
PREJITH AYLARA
7.5k views
•
33 slides
coal based thermal power plant
shri siddhi vinayak institute of technology, bareilly
2k views
•
22 slides
Thermal power plant
Vinod Srivastava
848 views
•
18 slides
Advertisement
More Related Content
Slideshows for you
Thermal Power Plant
PREMKUMAR
1.1k views
•
14 slides
hindalco power
Archana Nayak
1.4k views
•
53 slides
Thermal Power Plant
Arnab Kumar Pal
933 views
•
22 slides
Thermal power plant
HARI GOVIND SINGH
892 views
•
29 slides
POWER GENERATION OF THERMAL POWER PLANT
sathish sak
3.7k views
•
14 slides
Thermal power plant
Cyber4Tech
506 views
•
18 slides
Viewers also liked
solar power plant
Honey Pearl
24.7k views
•
20 slides
Heat engine
parth98796
19.2k views
•
20 slides
Thermal power point
Swatantra Kumar
104.1k views
•
23 slides
Thermal power plant
sagar20jain
14.5k views
•
37 slides
Boiler instrumentation-and-controls
DARSHAN B S
40.9k views
•
23 slides
Energy performance assessment of boilers
Utsav Jain
12k views
•
50 slides
Advertisement
Similar to Thermal power plant ppt
Presentation sai,varun.
Sai Kumar
626 views
•
27 slides
PPT ON THERMAL POWER PLANT (POLLUTION CONTROLLED)
HIMANSHU .
7.7k views
•
50 slides
Ppt aman
Aman Deep Thakur
146 views
•
23 slides
Thermalpwrplant 110924082908-phpapp02
arvind singh rathore
4k views
•
29 slides
Ntpc dadri ppt
ADITYA GUPTA
27.7k views
•
19 slides
Thermal power plant
Vinay Garg
150 views
•
26 slides
More from VIMLESH VERMA
Seapage control
VIMLESH VERMA
2k views
•
21 slides
Fem frame
VIMLESH VERMA
1.2k views
•
28 slides
Phytoremediation vimlesh verma
VIMLESH VERMA
787 views
•
33 slides
Str. clay minerlogy
VIMLESH VERMA
814 views
•
17 slides
Clay mineralogy
VIMLESH VERMA
3.9k views
•
21 slides
VIMLESH Project REPORT
VIMLESH VERMA
1.3k views
•
15 slides
Advertisement
Recently uploaded
Sensor.pptx
ShoaibAhmed64967
0 views
•
15 slides
ppt.pptx
aryanmewara2
0 views
•
21 slides
DIVERSION HEAD WORKS
Mood Naik
0 views
•
12 slides
Lecture 13_Intro to NTM and AJM.pptx
AyushKumar460797
0 views
•
47 slides
history of turbine engines.pdf
SushilKhadka17
0 views
•
15 slides
Basic Detailed Valves.pdf
truongcongtruc1
0 views
•
141 slides
Related Books
Free with a 30 day trial from Scribd
See all
Thermal power plant ppt
1. PRESENTED BY: • TANYA MALVI (130110052) • VIMLESH VERMA (130110054) • VIPIN SINGH (130110055) • VIVEK NAYAK (130110056) • CHULU HOSHI (130110057
Thermal Power Simulator Training
The document provides information about a thermal power simulator training that took place at Essar Power Gujarat Ltd in Jamnagar, India. It acknowledges the organizers and mentors of the training. It then provides details about the Salaya power plant including its location, phases, capacity and key components. It describes the specifics of the 2x600 MW simulator used for training including its advantages. The document outlines the daily plan for the training and provides an overview of the key systems and circuits within the thermal power plant such as the boiler, turbine, generators, transformers and main circuits.
Ppt of ajeet on suratgarh super thermal power station
This document provides an overview of Ajeet Singh Kuri's internship at the Suratgarh Super Thermal Power Station from May 16 to July 16, 2017. It discusses the power station's location, installed capacity, and favorable conditions. It then outlines the contents of Kuri's presentation, which includes introductions to the power station and the process of steam generation, as well as overviews of the coal handling plant, boiler, turbine, turbo generator, condenser, ash handling plant, cooling towers/ponds, and protection/switching systems.
ladle furnace metallurgy.pdf
Ladle furnace metallurgy means that the ladle refining furnace is used to refine the molten steel melted in the primary smelting furnace (electric arc furnace, open hearth furnace and converter), adjust the temperature of molten steel, buffer the process, and meet the requirements of continuous casting and continuous rolling. A ladle furnace is one of the main pieces of equipment for refining outside the furnace.
How Much Is an Electric Arc Furnace.pdf
The main parts of the electric arc furnace are the roof, furnace (the lower part of the furnace, from which molten metal is collected), electrode and side wall. The roof consists of three holes through which electrodes are inserted. The roof consists of alumina and magnesite chromite bricks. The furnace includes metal and slag. The tilting mechanism is used to pour molten metal into the cradle by moving the furnace. For electrode removal and furnace charging (filling waste metal), a roof retraction mechanism is adopted.
More Related Content
Similar to 1.5 T induction furnace.docx
A summer training presentation on national thermal power
This document provides an overview of a summer training presentation on the National Thermal Power Plant in Kahalgaon, Bihar, India. It discusses the key components and processes of a coal power plant, including: how coal is handled and burned to create steam; how the steam powers turbines which spin generators to produce electricity; and the roles of auxiliary equipment like transformers. The content is organized by the major sections of a thermal power plant and includes diagrams to illustrate key components like boilers, turbines, generators and transformers.
Ranjan NTPC KAHALGAON ppt
The document provides details about Ranjan Kumar's summer practical training at the National Thermal Power Corporation (NTPC) plant in Kahalgaon, Bihar, India. It discusses the various departments and systems at the plant including coal handling, ash handling, the boiler and turbine systems, water treatment, the cooling tower, electricity generation equipment, transformers, the switchyard, and control and instrumentation. The NTPC Kahalgaon plant has a total installed capacity of 2340 MW and uses coal from nearby mines to generate electricity through its steam turbine units.
Ramendra summer training presentation
This document provides an overview of several power plants in Delhi, India including their specifications and components. It discusses the working of gas power plants which use gas turbines and heat recovery steam generators. It also describes the water treatment plant, generators, transformers, switchyard components like circuit breakers and insulators. The specifications of various equipment are listed. Finally, it discusses the merits and demerits of gas turbine and steam power plants.
ppt on kstps 2016
The document provides an overview of the Kota Super Thermal Power Station in India. It discusses the power station's layout and key components including the coal handling plant, boiler, steam turbine, turbo generator, water treatment plant, and switchyard. The power station has a total installed capacity of 1240 MW generated across 7 units of varying sizes and commission dates. It utilizes bituminous coal sourced from local mines to power its steam-driven turbines. The document also briefly outlines the station's control room and various protection systems.
ppt on nspcl rourkela odisha
The document summarizes the author's summer training at the NSPCL power plant in Rourkela, India. It describes the key components of the plant including the coal handling plant, demineralization plant, boiler, air preheater, economizer, superheater, electrostatic precipitator, fans, condenser, cooling tower, turbines, alternator, and ash handling plant. It also discusses the switchyard equipment like isolators, transformers, circuit breakers and bus bars. The control room manages and monitors operations of the entire plant.
presentation_thermal_power.pptx
The document summarizes the key components and processes of the Kota Super Thermal Power Station in Rajasthan, India. It describes how coal is crushed and fed into boilers to produce superheated steam. The steam then rotates turbines connected to generators, producing electricity. The exhausted steam is condensed and recycled, and fly ash is captured. The power station has a total generation capacity of 1240 MW distributed across multiple stages and units.
presentation_thermal_power_plant_1447503788_165600.pptx
The document provides information about the Kota Super Thermal Power Station located in Kota, Rajasthan, India. It discusses the key processes and components of the power station, including how coal is crushed and fed into boilers to produce steam, how the steam rotates turbines connected to generators to produce electricity, and how ash is handled. The power station has a total net power generation capacity of 1240 MW produced across 5 stages using coal supplied by rail.
Mejia Thermal Power Station
The document provides an overview of the Mejia Thermal Power Station (MTPS) located in West Bengal, India. It is owned by the Damodar Valley Corporation and has a total installed capacity of 2340 MW generated from various units. The document describes the key components of the thermal power plant including the coal handling system, pulverizer, boiler, turbine, condenser, and switchyard. It also provides a step-by-step explanation of how coal is converted into electrical energy within the power station.
Thermal power plant
It's my pleasure to upload this file, I've really worked hard in creating this presentation. I Hope this File is helpful to you as well as several other pupils.
Introduction to induction heating by stead fast engineers
Introduction to induction heating by stead fast engineers. Find here Induction Furnace manufacturers,
Induction heater manufacturers,
Induction Billet heater Manufacturers,
Induction Melting furnace manufacturers,
Induction Furnace Manufacturers in India,
Induction Billet heater manufacturers in India,
Induction heating system,
Induction Melting Furnace
for your sourcing needs.
CSTPS training REPORT
MSEB was set up in 1960 to generate, transmit and distribute power to all consumers in
Maharashtra excluding Mumbai. MSEB was the largest SEB in the country. The generation
capacity of MSEB has grown from 760 MW in 1960-61 to 9771 MW in 2001-02. The customer
base has grown from 1,07,833 in 1960-61 to 1,40,09,089 in 2001-02.
C.S.T.P.S in contribution much in field of production of electricity. It is not only number
one thermal power station in Asia but also has occupied specific position on the international
map.
The first set was commission on August 1983 & was dedicated to nation by then PM
(late) Mrs. Indira Gandhi & second set commission on July 1984. The third & fourth units of
CSTPS under stage 2 were commissioned on the 3rd May 1985 & 8th March 1986 respectively.
The units 5 & 6 were commissioned on the 22nd March 1991 & 11th March 1992 respectively one
more units of 500MW was added to the CSTPS on making its generation to 2340 MW &
making “C.S.T.P.S.” as the giant in Power Generation of CSTPS.
LF ladle refining furnace.pdf
The LF ladle refining furnace is used to refine molten steel from primary furnaces through atmospheric arc heating, argon blowing and stirring, alloy feeding, temperature measurement, and sampling. It consists of a ladle and ladle car, heating device, vacuum and detection system, hydraulic and control systems, gas systems, electrical control system, and high voltage and current circuits. The LF furnace can be combined with an EBT electric furnace to achieve short processes, improve steel quality, and reduce costs. It can be customized based on a client's required capacity, working hours, power supply, raw materials, and other parameters.
rajwest thermal power plant
The document provides information about the layout and components of the Raj West Power Plant in Barmer, Rajasthan, India. The plant will be a 1080MW lignite-based thermal power plant using circulating fluidized bed combustion technology. Coal will be sourced from nearby mines through a joint venture company. The general layout and components of a thermal power plant are described, including coal handling, the boiler, turbine, generator, condenser, and ash handling. Key specifications of equipment like circuit breakers and isolators in the switchyard are also mentioned.
KTPS
The document provides information about Kolaghat Thermal Power Station located in West Bengal, India. It has six units totaling 1,260 MW capacity. The power plant uses a steam turbine process to convert the heat from burning coal into electrical energy. It describes the main equipment used including the coal handling plant, boiler, turbine, condenser, and electrical equipment like transformers and generators. The document provides technical specifications for many of the major components.
Ind lab.pptx
The document summarizes information about the Kota Super Thermal Power Plant in Rajasthan, India. It discusses the plant's history, current state, equipment including cooling towers, and future plans. The power plant began operations in 1983 with an approved capacity of 1240 Megawatts. It uses coal as its primary fuel and has seven operational units ranging from 110-210 Megawatts each. Cooling towers are mentioned as a key piece of equipment to reduce the temperature of water used in the plant. The document also notes India's future plans to reduce establishing new thermal power plants and shift to less polluting energy sources according to the country's policies.
Versohex immerssion heat exchnagers
The Versol standard range of heat exchangers are is developed to generate hot water/cold water efficiently with/without the need for storage. VERSOHEX can be used with storage tanks to heat up the stored water or can be inline in the system to produce hot/cold water directly. VERSOHEX can be in three ranges as below
VERSOHEX-IM – Immersion Heat Exchangers
VERSOHEX-PL- Plate Heat Exchangers
VERSOHEX-ST- Shell & Tube Heat Exchangers
VERSOHEX-IM Range VERSOL are specialized in the design and manufacturing of Immersion HeatExchangers for deferent applications. VERSOL Immersion Heaters are capable to fulfill customer requirements in Heating or Cooling of liquids. VERSOL offers mainly two type of Immersion Heaters. Immersion Heaters are designed to use with VERSOTHERM Calorifiers or Standard models are available to use with different Calorifiers Tanks. Material and size selection should be taken care after confirming the Calorifiers tank material and dimensions. 1. Electric Immersion Heaters (VERSOHEX-IM-ELE Range) 2. U Tube Bundle Immersion Heaters (VERSOHEX-IM-UT Range
Simulation of Induction Furnace Comparison with Practical Induction Furnace
In this paper, at first, a simulation of induction furnace model optimized resonant capacitor is designed for a practical induction furnace with parallel resonant inverter. Then rectifier and inverter snubber circuit are designed. And taken voltage, current, THD and power measured. This measured value comparison with actual working industry furnace data. and conclude that when furnace is not operate at full load that time its power factor is very low. And THD is high.
Presentation 1 (2).pptx
×
SlideShare a Scribd company logo
Search
Submit Search
Thermal power plant ppt
VIMLESH VERMA
VIMLESH VERMA
Oct. 24, 2016
•
265 likes
•
145,762 views
1 of 21
thermal power plant
Engineering
Advertisement
Recommended
Thermal power plant
SANT LONGOWAL INSTITUTE OF ENGINEERING AND TECHNOLOGY
2.2k views
•
20 slides
Thermal Power Plant
Jeegnesh Solanki
10k views
•
37 slides
Thermal Power Station
Raji Kumar
3.6k views
•
11 slides
Thermal power Plant presentation
Shahzaib Hussain
1.6k views
•
58 slides
Thermal power plant
Rahul Jalan
653 views
•
29 slides
Power plant
PREJITH AYLARA
7.5k views
•
33 slides
coal based thermal power plant
shri siddhi vinayak institute of technology, bareilly
2k views
•
22 slides
Thermal power plant
Vinod Srivastava
848 views
•
18 slides
Advertisement
More Related Content
Slideshows for you
Thermal Power Plant
PREMKUMAR
1.1k views
•
14 slides
hindalco power
Archana Nayak
1.4k views
•
53 slides
Thermal Power Plant
Arnab Kumar Pal
933 views
•
22 slides
Thermal power plant
HARI GOVIND SINGH
892 views
•
29 slides
POWER GENERATION OF THERMAL POWER PLANT
sathish sak
3.7k views
•
14 slides
Thermal power plant
Cyber4Tech
506 views
•
18 slides
Viewers also liked
solar power plant
Honey Pearl
24.7k views
•
20 slides
Heat engine
parth98796
19.2k views
•
20 slides
Thermal power point
Swatantra Kumar
104.1k views
•
23 slides
Thermal power plant
sagar20jain
14.5k views
•
37 slides
Boiler instrumentation-and-controls
DARSHAN B S
40.9k views
•
23 slides
Energy performance assessment of boilers
Utsav Jain
12k views
•
50 slides
Advertisement
Similar to Thermal power plant ppt
Presentation sai,varun.
Sai Kumar
626 views
•
27 slides
PPT ON THERMAL POWER PLANT (POLLUTION CONTROLLED)
HIMANSHU .
7.7k views
•
50 slides
Ppt aman
Aman Deep Thakur
146 views
•
23 slides
Thermalpwrplant 110924082908-phpapp02
arvind singh rathore
4k views
•
29 slides
Ntpc dadri ppt
ADITYA GUPTA
27.7k views
•
19 slides
Thermal power plant
Vinay Garg
150 views
•
26 slides
More from VIMLESH VERMA
Seapage control
VIMLESH VERMA
2k views
•
21 slides
Fem frame
VIMLESH VERMA
1.2k views
•
28 slides
Phytoremediation vimlesh verma
VIMLESH VERMA
787 views
•
33 slides
Str. clay minerlogy
VIMLESH VERMA
814 views
•
17 slides
Clay mineralogy
VIMLESH VERMA
3.9k views
•
21 slides
VIMLESH Project REPORT
VIMLESH VERMA
1.3k views
•
15 slides
Advertisement
Recently uploaded
Sensor.pptx
ShoaibAhmed64967
0 views
•
15 slides
ppt.pptx
aryanmewara2
0 views
•
21 slides
DIVERSION HEAD WORKS
Mood Naik
0 views
•
12 slides
Lecture 13_Intro to NTM and AJM.pptx
AyushKumar460797
0 views
•
47 slides
history of turbine engines.pdf
SushilKhadka17
0 views
•
15 slides
Basic Detailed Valves.pdf
truongcongtruc1
0 views
•
141 slides
Related Books
Free with a 30 day trial from Scribd
See all
Thermal power plant ppt
1. PRESENTED BY: • TANYA MALVI (130110052) • VIMLESH VERMA (130110054) • VIPIN SINGH (130110055) • VIVEK NAYAK (130110056) • CHULU HOSHI (130110057
Thermal Power Simulator Training
The document provides information about a thermal power simulator training that took place at Essar Power Gujarat Ltd in Jamnagar, India. It acknowledges the organizers and mentors of the training. It then provides details about the Salaya power plant including its location, phases, capacity and key components. It describes the specifics of the 2x600 MW simulator used for training including its advantages. The document outlines the daily plan for the training and provides an overview of the key systems and circuits within the thermal power plant such as the boiler, turbine, generators, transformers and main circuits.
Ppt of ajeet on suratgarh super thermal power station
This document provides an overview of Ajeet Singh Kuri's internship at the Suratgarh Super Thermal Power Station from May 16 to July 16, 2017. It discusses the power station's location, installed capacity, and favorable conditions. It then outlines the contents of Kuri's presentation, which includes introductions to the power station and the process of steam generation, as well as overviews of the coal handling plant, boiler, turbine, turbo generator, condenser, ash handling plant, cooling towers/ponds, and protection/switching systems.
Similar to 1.5 T induction furnace.docx (20)
A summer training presentation on national thermal power
A summer training presentation on national thermal power
presentation_thermal_power_plant_1447503788_165600.pptx
presentation_thermal_power_plant_1447503788_165600.pptx
Introduction to induction heating by stead fast engineers
Introduction to induction heating by stead fast engineers
Simulation of Induction Furnace Comparison with Practical Induction Furnace
Simulation of Induction Furnace Comparison with Practical Induction Furnace
Ppt of ajeet on suratgarh super thermal power station
Ppt of ajeet on suratgarh super thermal power station
More from Kerri Zhang
ladle furnace metallurgy.pdf
Ladle furnace metallurgy means that the ladle refining furnace is used to refine the molten steel melted in the primary smelting furnace (electric arc furnace, open hearth furnace and converter), adjust the temperature of molten steel, buffer the process, and meet the requirements of continuous casting and continuous rolling. A ladle furnace is one of the main pieces of equipment for refining outside the furnace.
How Much Is an Electric Arc Furnace.pdf
The main parts of the electric arc furnace are the roof, furnace (the lower part of the furnace, from which molten metal is collected), electrode and side wall. The roof consists of three holes through which electrodes are inserted. The roof consists of alumina and magnesite chromite bricks. The furnace includes metal and slag. The tilting mechanism is used to pour molten metal into the cradle by moving the furnace. For electrode removal and furnace charging (filling waste metal), a roof retraction mechanism is adopted.
Casting VS Forging.pdf
Castings are integrally cast in the mold. Its stress distribution is uniform and there is no restriction on the compression direction. The forging is pressed by the force in the same direction, and its internal stress has directionality, so it can only bear the pressure with directionality.
￠8--25mm rebar rolling mill line.pdf
Technical quotation of 8-25mm rebar rolling mill line for your reference. If interested, please contact me.
Email: marketing2@hanrm.com.
Whatsapp & Wechat: +8618392033938
100-ton Ladle Car for Sale.docx
The body of the ladle car is mainly composed of two longitudinal beams and four transverse beams. The longitudinal beams and transverse beams are box structures, which mainly ensure the strength and stiffness of the frame. It is between the two beams of the running rotating device, and a heat insulation layer and a protective cover are set around the transmission device, which effectively avoids the heat radiation of molten steel and steel slag and greatly improves the service life of the transmission device.
ELECTRIC ARC FURNACE AC COMPONENTES.pdf
The electric arc furnace body is an electric furnace for smelting ore and metal at a high temperature generated by electrode arc. Electric arc furnace is divided into DC electric arc furnace and AC electric arc furnace.
The electric arc furnace body Electric arc furnace is an electric furnace for smelting ore and metal at a high temperature generated by an electrode arc. Electric arc furnace is divided into DC electric arc furnace and AC electric arc furnace.
Complete Rolling Mill & Equipment Manufacturer ---Hani Tech
Design, manufacture and revamp, upgrade your rolling mill plant according to your tech requirements. Hani is the one-stop supplier able to design, manufacture, install and commission your hot rolling mill plant from A to Z.
What are the types of induction furnace?
Induction furnaces are commonly used for heating metals in casting, forging, and heat treating. They are classified according to their use, such as foundry melting furnaces for casting or quenching furnaces for heat treating. They are also classified based on the material melted, such as aluminum melting furnaces. Additionally, induction furnaces are classified by their power supply structure, such as single or multiple power supply configurations. The document provides an overview of common induction furnace types and classifications.
What is induction furnace?
Induction furnace is a device that converts AC power to intermediate frequency current to heat metal materials through electromagnetic induction. It has several advantages over traditional furnaces like faster heating, more uniform temperatures, lower energy consumption and reduced pollution. Induction furnaces are used for smelting metals and for heat treatment processes like quenching, tempering and annealing. They provide efficient, clean heating due to generating heat within the workpiece through electromagnetic induction rather than an external flame.
Han cardan shaft catalogue
Since 1981 Hani Tech has been producing Cardan shaft（universal joint） assemblies to a high-quality standard and with a large vertical range of products specifically aimed at meeting the requirements of customers.
Low-maintenance cardan shaft universal joint shafts reliably transmit torques of up to 600,000 Nm in the steel factory.
Our Cardan shafts, with swing diameters ranging from 90 to 435 mm transmit mechanical drive power in steel rolling mill plant.
Electrric arc furnace
The slide mainly tells you the brief introduction of the electric arc furnace, and whose development history, classification, and advantages.
Rebar and Wire rod rolling mill manufacturer
Hani Tech is devoted to the steel rolling mill machinery industry, we specialized in manufacturing high-speed morgan wire rod mill, high-speed rebar rolling mill, TMT rolling mill, high-speed gearbox, hard-faced gearbox. We also provide complete design for your rolling mill workshop, not only turnkey project but also tailor-made service, and we provide all the parts for roughing rolling mill, intermediate rolling mill process, including pinch roll, all kinds of shears, laying head, all of these crucial parts work etc.
More from Kerri Zhang (12)
Complete Rolling Mill & Equipment Manufacturer ---Hani Tech
Complete Rolling Mill & Equipment Manufacturer ---Hani Tech
Recently uploaded
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
The need for ecofriendly materials as building materials in this century cannot be overemphasized
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Recently uploaded (20)
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
DESIGN AND MANUFACTURE OF CEILING BOARD USING SAWDUST AND WASTE CARTON MATERI...
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
1.5 T induction furnace.docx
- 1. 1.5 Ton Induction Furnace for Sale The 1.5T medium frequency furnace is melting equipment commonly used in the foundry industry. Its rated capacity is 1.5T in steel, the melting power is generally 1000kW, and the melting speed is one furnace within 1 hour. The furnace body is tilted by hydraulic pressure or reducer, covering an area of about 10 square meters. The cooling method is hsbl cooling tower. 1. The Steel Shell Induction Furnace with 1.5T Power Supply and 2 Furnace Bodies Is Composed of: The main equipment of induction melting furnace Series re sonant i KGPS-CL-1000KW/0.5KHz 1set 50 days after the
- 2. ntermedi ate freq uency p ower su pply cab inet advance paymen t is recei ved, the supplier shall be respons ible for t he trans portatio n, install ation an d commi ssioning of the s upplied equipme nt 2 Connecting copper bar (with water cooli ng) Between intermediate freque ncy power supply and capac itor cabinet 1 set 3 Compensation electr othermal capacitor c abinet 1000KW/0.5KHz 1 set 4 Filter electrothermal capacitor cabinet 1000KW/0.5KHz 1 set 4 water cooling cable Between capacitance compe nsation cabinet and furnace body 2 sets 5 waterway From furnace body and pow er cabinet to water inlet an d outlet point 2 sets 6 Steel shell furnace b ody with the magne GW-1.5-1000Kw/0.5KHz 2 stands
- 3. tic yoke 7 Hydraulic system 1.5T special 1 set 8 Crucible mould 1.5t special 1 piece 9 Water dispenser For backwater 2 sets 10 Tilting console 1set 11 Furnace leakage alar m 2 sets Cooling of 1.5t medium frequency furnace 1 Closed cooling towe r HSBL-130 Complete cooling of induction furnace 1stands 2. Technical Parameters of Steel Shell Induction Melting Furnace with 1.5T Power Supply and 2 Furnace Bodies Items Unit parameters ⑴Electric furnace parameter s 1.5T steel shell Rated capacity t 1.5 Max Capacity t 1.8 Melting temperature ℃ 1650 ⑵ Electrical parameters Rectifier transformer capacit KVA 1250
- 4. y Transformer primary voltag e KV 10 Transformer secondary volt age V 660V Rated power of intermediat e frequency power supply KWA 1000 Design frequency HZ 500 Startup success rate 100％ ⑶ Tilting system Hydraulic tilting system ⑷ colling water system Cooling water flow (furnace body) t/h 90(single furnace body) Cooling water flow (power supply) t/h 40(Single power supply) Water supply pressure Mpa 0.2-0.35 3. Component Selection of 1.5T Induction Furnace: 1. The reactor of the 1.5T induction furnace has a coil with a copper tube diameter of 15mm and a wall thickness of 1.5mm.
- 5. 2. 1.5T medium frequency furnace constant power main control board, quantity: 1. 3. Incoming voltage of 1.5T medium frequency furnace: 6600v, intermediate frequency output voltage: 1200V, DC voltage: 880v. 4. Heating power of 1.5T medium frequency furnace: 1000kW. 5. KK thyristor 1500A / 2000V for 1.5T medium frequency furnace, quantity 8. 6. KP thyristor 1800A / 2500V for 1.5T medium frequency furnace, 6 in quantity. 7. Capacitor of 1.5T medium frequency furnace, specification 2000kf / 1200V, quantity 77 sets. 8. Tilting mechanism of 1.5T medium frequency furnace: hydraulic tilting. 9. Shell of 1.5T medium frequency furnace: 1230mm in diameter and 1350mm in height.
- 6. 10. Induction coil of 1.5T medium frequency furnace: copper tube 25mm x 40mm x 3.5mm, inner diameter 730mm, 15 turns. Contact US Email: marketing2@hanrm.com; kerrirollingmill@gmail.com Website: www.smeltingfurnaces.com