1. Pyruvate dehydrogenase is a large comples enzyme containing many .pdf
•
0 likes•2 views
1. Pyruvate dehydrogenase is a large comples enzyme containing many copies of each of three enzyme called E1, E2 and E3. 2. Pyruvate dehydrogenase(E1) has TPP prosthetic groups. Dihyrolipoyl transacetylase(E2) has Lipoamide prosthetic groups, similarly Dihydrolipyl dehydrogenase(E3) has FAD prosthetic group. 3. Dihyrolipoamide and lipoamide can be interconverted. Lipoamide consists of lipoic acid linked via an amid bond to sigma amino groups of a Lys residue. 4. Hydroxyethyl group derived from pyruvate attacks the lipoamide disulfide, and TPP is eliminated. Dihydroxyethyl carbanion oxidised to acetyle group and lipoamide disulfide is reduced. 5. E2 then catalyses to transfer of acetyle group to CoA to acetyle CoA and dihydrolipoamideE2. 6. Dihydrolipoyl dehydrogenase reoxidizes dihydrolipoamide to complete catalytic cycle of E2. The oxidized E3 contains a reactive Cys-Cys disulfide bond and a tightly bound FAD. 7. Finally, reduced E3 is reoxidized. The sulfhydryl groups are reoxidized by a mechanish in which FAD funnels electrons to NAD+ yielding NADH. Solution 1. Pyruvate dehydrogenase is a large comples enzyme containing many copies of each of three enzyme called E1, E2 and E3. 2. Pyruvate dehydrogenase(E1) has TPP prosthetic groups. Dihyrolipoyl transacetylase(E2) has Lipoamide prosthetic groups, similarly Dihydrolipyl dehydrogenase(E3) has FAD prosthetic group. 3. Dihyrolipoamide and lipoamide can be interconverted. Lipoamide consists of lipoic acid linked via an amid bond to sigma amino groups of a Lys residue. 4. Hydroxyethyl group derived from pyruvate attacks the lipoamide disulfide, and TPP is eliminated. Dihydroxyethyl carbanion oxidised to acetyle group and lipoamide disulfide is reduced. 5. E2 then catalyses to transfer of acetyle group to CoA to acetyle CoA and dihydrolipoamideE2. 6. Dihydrolipoyl dehydrogenase reoxidizes dihydrolipoamide to complete catalytic cycle of E2. The oxidized E3 contains a reactive Cys-Cys disulfide bond and a tightly bound FAD. 7. Finally, reduced E3 is reoxidized. The sulfhydryl groups are reoxidized by a mechanish in which FAD funnels electrons to NAD+ yielding NADH..
Report
Share
Report
Share
Download to read offline
Recommended
Pdc ani
The pyruvate dehydrogenase complex (PDC) catalyzes the oxidative decarboxylation of pyruvate to form acetyl-CoA and consists of multiple enzymes and cofactors. Pyruvate dehydrogenase (E1) uses thiamine pyrophosphate to decarboxylate pyruvate. Dihydrolipoyl transacetylase (E2) transfers the acetyl group to coenzyme A with help from lipoic acid. Dihydrolipoyl dehydrogenase (E3) regenerates the oxidized cofactors using NAD+ and FAD, generating NADH to fuel the electron transport chain. PDC is regulated by product inhibition and phosphorylation/dephosphorylation of E1 by
Citric acid cycle
The citric acid cycle is the key metabolic pathway that generates energy in the form of ATP and NADH through the oxidation of acetyl-CoA derived from carbohydrates, fats, and proteins. The cycle's 10 steps occur in the mitochondrial matrix and involve enzymatic conversions between citrate, isocitrate, alpha-ketoglutarate, succinyl-CoA, succinate, fumarate, malate, and oxaloacetate. Two carbon atoms are removed as CO2 from acetyl-CoA in each turn of the cycle, generating high-energy electron carriers used in oxidative phosphorylation to produce ATP.
TCA Cycle Presentation by Ghulam Murtaza
This presentation explains a series of chemical reactions in TCA Cycle used by all aerobic organisms to release stored energy through the oxidation of acetyl-CoA derived from carbohydrates, fats, and proteins into carbon dioxide and chemical energy in the form of adenosine triphosphate (ATP). In addition, the cycle provides precursors of certain amino acids, as well as the reducing agent NADH, that are used in numerous other biochemical reactions.
Citric acid cycle extensive and for more understanding
Five coenzymes are required for the oxidative decarboxylation of pyruvate: thiamine pyrophosphate, flavin adenine dinucleotide, coenzyme A, nicotinamide adenine dinucleotide, and lipoate. Vitamins like thiamine, riboflavin, niacin, and pantothenate are components of these coenzymes. The pyruvate dehydrogenase complex converts pyruvate to acetyl-CoA through a multi-step process involving the transfer of acetyl and hydride groups between the coenzymes and enzymes.
Pyruvate Dehydrogenase and Tricarboxylic Acid Cycle - PDH and TCA
1. The document discusses the pyruvate dehydrogenase complex (PDC) which transforms pyruvate into acetyl-CoA, linking glycolysis to the citric acid cycle.
2. PDC is a multienzyme complex located in the mitochondrial matrix consisting of three enzymes and 60 subunits.
3. The citric acid cycle (TCA cycle) is the final common pathway for the oxidation of acetyl-CoA derived from carbohydrates, fatty acids, and amino acids. It operates under aerobic conditions.
Biological oxidation by Dr.Sohil Takodara
The document discusses biological oxidation and energy production in cells. It can be summarized as:
i. Biological oxidation involves the transfer of electrons from nutrients through an electron transport chain (ETC) in the mitochondria to oxygen. This releases energy that is trapped as ATP through oxidative phosphorylation.
ii. The ETC consists of four complexes embedded in the inner mitochondrial membrane that sequentially accept electrons from electron carriers like NADH and FADH2. As electrons flow through the complexes, protons are pumped from the matrix to the intermembrane space.
iii. The proton gradient drives ATP synthase to phosphorylate ADP to ATP. This couples oxidation of nutrients to phosphorylation in the mitochondria to produce cellular energy through
lecture_23a.ppt
The citric acid cycle (TCA cycle) is a central metabolic pathway that catalyzes the oxidation of acetyl-CoA derived from carbohydrates, fats, and proteins, producing carbon dioxide and reducing equivalents in the form of NADH and FADH2 that are used in oxidative phosphorylation. It was established in the 1930s that TCA cycle intermediates stimulated oxygen consumption and CO2 release. Key discoveries in the 1940s-1950s showed that acetyl-CoA is the intermediate connecting pyruvate to the TCA cycle, and that the TCA cycle enzymes are organized in the mitochondrial matrix.
Recommended
Pdc ani
The pyruvate dehydrogenase complex (PDC) catalyzes the oxidative decarboxylation of pyruvate to form acetyl-CoA and consists of multiple enzymes and cofactors. Pyruvate dehydrogenase (E1) uses thiamine pyrophosphate to decarboxylate pyruvate. Dihydrolipoyl transacetylase (E2) transfers the acetyl group to coenzyme A with help from lipoic acid. Dihydrolipoyl dehydrogenase (E3) regenerates the oxidized cofactors using NAD+ and FAD, generating NADH to fuel the electron transport chain. PDC is regulated by product inhibition and phosphorylation/dephosphorylation of E1 by
Citric acid cycle
The citric acid cycle is the key metabolic pathway that generates energy in the form of ATP and NADH through the oxidation of acetyl-CoA derived from carbohydrates, fats, and proteins. The cycle's 10 steps occur in the mitochondrial matrix and involve enzymatic conversions between citrate, isocitrate, alpha-ketoglutarate, succinyl-CoA, succinate, fumarate, malate, and oxaloacetate. Two carbon atoms are removed as CO2 from acetyl-CoA in each turn of the cycle, generating high-energy electron carriers used in oxidative phosphorylation to produce ATP.
TCA Cycle Presentation by Ghulam Murtaza
This presentation explains a series of chemical reactions in TCA Cycle used by all aerobic organisms to release stored energy through the oxidation of acetyl-CoA derived from carbohydrates, fats, and proteins into carbon dioxide and chemical energy in the form of adenosine triphosphate (ATP). In addition, the cycle provides precursors of certain amino acids, as well as the reducing agent NADH, that are used in numerous other biochemical reactions.
Citric acid cycle extensive and for more understanding
Five coenzymes are required for the oxidative decarboxylation of pyruvate: thiamine pyrophosphate, flavin adenine dinucleotide, coenzyme A, nicotinamide adenine dinucleotide, and lipoate. Vitamins like thiamine, riboflavin, niacin, and pantothenate are components of these coenzymes. The pyruvate dehydrogenase complex converts pyruvate to acetyl-CoA through a multi-step process involving the transfer of acetyl and hydride groups between the coenzymes and enzymes.
Pyruvate Dehydrogenase and Tricarboxylic Acid Cycle - PDH and TCA
1. The document discusses the pyruvate dehydrogenase complex (PDC) which transforms pyruvate into acetyl-CoA, linking glycolysis to the citric acid cycle.
2. PDC is a multienzyme complex located in the mitochondrial matrix consisting of three enzymes and 60 subunits.
3. The citric acid cycle (TCA cycle) is the final common pathway for the oxidation of acetyl-CoA derived from carbohydrates, fatty acids, and amino acids. It operates under aerobic conditions.
Biological oxidation by Dr.Sohil Takodara
The document discusses biological oxidation and energy production in cells. It can be summarized as:
i. Biological oxidation involves the transfer of electrons from nutrients through an electron transport chain (ETC) in the mitochondria to oxygen. This releases energy that is trapped as ATP through oxidative phosphorylation.
ii. The ETC consists of four complexes embedded in the inner mitochondrial membrane that sequentially accept electrons from electron carriers like NADH and FADH2. As electrons flow through the complexes, protons are pumped from the matrix to the intermembrane space.
iii. The proton gradient drives ATP synthase to phosphorylate ADP to ATP. This couples oxidation of nutrients to phosphorylation in the mitochondria to produce cellular energy through
lecture_23a.ppt
The citric acid cycle (TCA cycle) is a central metabolic pathway that catalyzes the oxidation of acetyl-CoA derived from carbohydrates, fats, and proteins, producing carbon dioxide and reducing equivalents in the form of NADH and FADH2 that are used in oxidative phosphorylation. It was established in the 1930s that TCA cycle intermediates stimulated oxygen consumption and CO2 release. Key discoveries in the 1940s-1950s showed that acetyl-CoA is the intermediate connecting pyruvate to the TCA cycle, and that the TCA cycle enzymes are organized in the mitochondrial matrix.
Citric Acid Cycle
The citric acid cycle is a series of chemical reactions in the mitochondria that break down acetyl groups from carbohydrates, fats, and proteins into carbon dioxide, generating reduced coenzymes used in oxidative phosphorylation to produce ATP. Pyruvate is converted to acetyl-CoA by the pyruvate dehydrogenase complex, then the citric acid cycle oxidizes acetyl-CoA in 8 steps, producing NADH, FADH2, and GTP or ATP while releasing CO2. This cycling of intermediates allows for the efficient breakdown of fuels to generate energy.
Tca cycle b.pharm
The document summarizes the three stages of catabolism:
1. Pyruvate is converted to acetyl-CoA in the mitochondria by the pyruvate dehydrogenase complex. This is the committed step to the citric acid cycle.
2. The pyruvate dehydrogenase complex contains three enzymes and requires five cofactors including thiamine pyrophosphate and Coenzyme A.
3. Acetyl-CoA then enters the citric acid cycle, which occurs in the mitochondrial matrix and fully oxidizes acetyl-CoA, producing carbon dioxide and reducing equivalents like NADH and FADH2.
citric acid cycle.pptx funtion and explained in detail
Citric acid is a versatile organic acid found in many fruits, especially citrus fruits like lemons, oranges, limes, and grapefruits. Its chemical formula is C6H8O7, and it's classified as a weak acid. Citric acid has a wide range of applications, from food and beverage production to household cleaning and skincare. In this comprehensive description, I'll delve into its properties, uses, production methods, health effects, and environmental impact.
*1. Properties of Citric Acid:*
Citric acid appears as a white crystalline powder or granules. It's odorless and has a tart, sour taste. It's highly soluble in water, making it easy to incorporate into various products. Citric acid is stable at room temperature but decomposes at higher temperatures, losing its acidic properties. It's a chelating agent, meaning it can bind to metal ions, making it useful in certain industrial processes and household cleaners.
*2. Sources of Citric Acid:*
While citric acid occurs naturally in citrus fruits, it's also produced commercially through microbial fermentation, primarily using strains of the fungus Aspergillus niger. This method allows for large-scale production of citric acid to meet the demand in various industries. Additionally, it can be synthesized chemically, although this method is less common due to higher production costs and environmental concerns.
*3. Uses of Citric Acid:*
*- Food and Beverage Industry:* Citric acid is widely used as a flavoring agent, acidity regulator, and preservative in the food and beverage industry. It enhances the flavor of many products and provides a tart taste in sodas, candies, jams, and preserves. It also acts as a preservative, extending the shelf life of packaged foods and preventing discoloration in fruits and vegetables.
*- Pharmaceutical Industry:* Citric acid is used in pharmaceuticals as a pH regulator, excipient in tablets and capsules, and as a flavoring agent in syrups and liquid medications.
*- Cleaning Products:* Due to its chelating properties, citric acid is used in household cleaning products such as descalers, bathroom cleaners, and dishwashing detergents. It effectively removes mineral deposits and stains without the need for harsh chemicals.
*- Cosmetics and Personal Care:* Citric acid is found in skincare products like exfoliating scrubs, facial peels, and anti-aging creams. It helps to promote skin renewal by gently removing dead skin cells and promoting collagen production.
*- Industrial Applications:* Citric acid is used in various industrial processes, including water softening, metal cleaning, and the production of detergents and surfactants.
*4. Production Methods:*
*- Microbial Fermentation:* This is the most common method for commercial production of citric acid. It involves fermenting glucose or sucrose-containing substrates with strains of Aspergillus niger in large-scale bioreactors. The fungus produces citric acid as a byproduct of its metabolism, which is then extracted and purified.
*- C
Some Q & A Metabolism - II | IGNOU Biochemistry CHE-09 (in English /Hinglish)
Metabolism ll - pyruvate dehydrogenase complex, substrate channeling, central role of TCA cycle, aconitase, anaplerosis, beta oxidation vs fatty acid synthesis
Terpenoids Biosynthesis
Plants produce a vast and diverse organic compounds, which do not appear to participate directly in growth and development.These substances traditionally referred to as secondary metabolites which terpenes are one of them.
Fatty Acid metabolism_oxidation, catabolism.ppt
This document provides an overview of lipids and related biomolecules. It discusses the structure and function of fatty acids, triglycerides, phospholipids, sterols like cholesterol, prostaglandins, terpenes and carotenoids. Key points covered include the biosynthesis of fatty acids from acetyl-CoA, the iterative process of fatty acid elongation, and the mevalonate pathway for biosynthesis of isopentyl diphosphate, the basic building block for terpenes and sterols. Biosynthesis of specific molecules like cholesterol, vitamin D, bile acids and sex hormones are also summarized.
11 krebs cycle
The Pyruvate Dehydrogenase complex catalyzes the conversion of pyruvate to acetyl-CoA and includes three enzymes: E1, E2, and E3. E1 uses thiamine pyrophosphate to oxidize pyruvate and transfer the acetyl group to E2. Lipoic acid covalently attached to E2 carries the acetyl group to E3, where it is transferred to CoA to form acetyl-CoA. Electrons are transferred through the complex to NAD+ to form NADH. The complex is regulated by phosphorylation/dephosphorylation of E1 and by product inhibition by NADH and acetyl-CoA. Acetyl-CoA produced
Enzyme classification (EC).ppt
The document describes the Enzyme Commission (EC) classification system for enzymes. It provides details on the hierarchical numbering scheme used to classify enzymes based on the chemical reactions they catalyze. Each EC number consists of up to four numbers that become progressively more specific. For example, EC 3.4.11.4 represents an enzyme that acts on peptide bonds (3.4), cleaves the amino-terminal amino acid from a polypeptide (3.4.11), and specifically cleaves a tripeptide (3.4.11.4). The document also lists some of the main EC classes and provides examples of enzymes within each class.
Chapter2 part2
The document discusses the key biomolecules that make up living organisms: carbohydrates, lipids, proteins, and nucleic acids. It describes their monomers and polymers, how they are assembled through condensation and hydrolysis reactions, and provides examples of their structures and functions in cells.
Plant metabolism and redox agents plant biochemistry ii
Role of redox reaction in plant metabolism and examples of oxidation and reduction reaction in plants, plant Biochemistry II
onecarbonmetabolismbscclass-161115134043 (1).pdf
Folic acid plays a key role in one-carbon metabolism and is essential for biosynthesis. It acts as a carrier of one-carbon groups for metabolic reactions. The biologically active form is tetrahydrofolate (THF), which carries various one-carbon derivatives to donate in reactions. THF participates in metabolic pathways like purine and pyrimidine synthesis, histidine catabolism, methionine synthesis, and protein synthesis. Deficiency can cause megaloblastic anemia and birth defects. Folic acid is obtained from green leafy vegetables and inhibited by sulphonamides and methotrexate.
One carbon metabolism
here I explained about one carbon metabolism in a simple way .this can be useful for both under graduates and postgraduates.
Krebs cycle/Citric acid cycle
The Krebs cycle summarizes a circular series of reactions in the mitochondria to metabolize AcCoA to two molecules of CO2 with the resultant generation of one molecule of GTP, three molecules of NADH, and one molecule of FADH2. GTP is equivalent to ATP in terms of energy charge.
FUNCTION: The main function of the Krebs cycle is to produce energy, stored and transported as ATP or GTP. The cycle is also central to other biosynthetic reactions where the intermediates produced are required to make other molecules, such as amino acids, nucleotide bases, and cholesterol.
Biomolecules carbohydrates, lipids, nucleic acid
The document discusses different types of biomolecules. It focuses on carbohydrates, lipids, nucleic acids and provides details about their structure, functions and classification. Carbohydrates include monosaccharides, oligosaccharides and polysaccharides. Major lipids are triacylglycerols, phospholipids and sterols. Nucleic acids are DNA and RNA which store and transmit genetic information.
Co enzymes
This document discusses co-enzymes and their functions. It defines co-factors as non-protein components that assist enzymes in biochemical transformations, and can be organic or inorganic. Organic co-factors include vitamins like NAD+, Coenzyme A, and flavin mononucleotide. Inorganic co-factors include metal ions like copper, iron, and magnesium. Co-enzymes are loosely bound co-factors that transport groups between enzymes, and include NAD+, Coenzyme A, flavin adenine dinucleotide, and adenosine triphosphate. Specific examples of enzymes requiring various co-enzymes are provided.
Structure And Function Of Macromolecules1
Macromolecules are polymers formed from monomers through dehydration or condensation reactions. Carbohydrates, proteins, lipids, and nucleic acids are the four major macromolecules. Carbohydrates include simple sugars and complex polysaccharides used for energy storage and structural support. Proteins are polymers of amino acids with primary, secondary, tertiary, and quaternary levels of structure determining their function. Lipids are nonpolar hydrophobic molecules including fats, oils, and steroids that serve roles in energy storage, insulation, and cell membranes. Nucleic acids like DNA are composed of nucleotides with phosphate, sugar, and nitrogenous base components that determine their information-storing roles.
Structure And Function Of Macromolecules1
Macromolecules are polymers formed from monomers through dehydration or condensation reactions. Carbohydrates, proteins, lipids, and nucleic acids are major macromolecules. Carbohydrates include simple sugars and complex polysaccharides used for energy storage and structure. Proteins are polymers of amino acids with four levels of structure determining their function. Lipids are nonpolar and include fats, oils, and phospholipids that serve structural and energy roles. Nucleic acids like DNA are composed of nucleotides with phosphate, sugar and nitrogenous base components.
Cellular Energy Transfer (Glycolysis and Krebs Cycle) and ATP
This presentation is all about Cellular Energy Transfer with reference to Glycolysis and Kreb Cycle with all their stages involved.
It also includes ATP production in the body, its importance, structure.
Also contains a comparison of energy production in Krebs and Glycolysis cycle.
Lipid chemistry V2 By Dr Anurag Yadav
Lipid chemistry, classification, properties and details of the Lipids, fatty acids and Lipoproteins are discussed. MBBS, BDS, BSc, MSc, Nursing etc
Lipids
Lipids are organic molecules that are nonpolar and insoluble in water. They include fatty acids, glycerides like triglycerides found in fats and oils, phospholipids that make up cell membranes, and sterols like cholesterol. Lipids serve important functions like energy storage, forming cell membranes, and acting as chemical messengers. They can be classified based on their building blocks, which include fatty acids, glycerol, sphingosine, and steroid rings. Major lipid types include fatty acids, triglycerides, phospholipids, sphingolipids, and steroids.
}Solution}.pdf
The document discusses a solution for improving the efficiency of solar panels. It proposes coating solar panels with a new material that can absorb more wavelengths of light, increasing energy absorption by 40%. This coating material is inexpensive to produce and easy to apply, allowing for widespread implementation of more effective solar energy technology.
What is an OS • Interface between application programs and hardwa.pdf
What is an OS?
• Interface between application programs and hardware
• Ultimate control program
– Exploits hardware resources of one or more processors to provide a set of services to users
– Coordinates the use of hardware among various application programs for different users
– Manages secondary memory and I/O devices on behalf of its users
• Two different views of an OS
1. Extended machine view
– Virtual machine that is easier to understand and program
– Tool to make programmer’s job easy
2. Resource manager view
– Tool to facilitate efficient operation of computer system
– Provides services to users; processor, memory, I/O, system bus
– Must be fair; not partial to any process, specially for process in the same class
– Must discriminate between different class of jobs with different service requirements
– Do the above efficiently
Within the constraints of fairness and efficiency, an OS should attempt to maximize throughput,
minimize
response time, and accommodate as many users as possible
Basic elements
• A computer has a number of modules, with possibly more than one instance of each
• Processor/CPU
– Controls the operations of computer and performs data processing functions
– Exchanges data with memory using memory address register and memory buffer register
– Exchanges data with I/O devices using I/O address register and I/O buffer register
• Main memory/Primary memory
– Stores data and programs
– Typically volatile
– Abstracted as a set of locations, defined by sequentially numbered addresses
– Each location contains a bit pattern to be interpreted as either an instruction or data
• I/O modules/architecture
– Move data between a computer and external environment
– Communicate with a variety of devices including secondary memory (disks), communications
equipment, and
terminals
– Data flows between CPUs, RAM and I/O devices over buses
– System bus
Provides for communications among processors, main memory, and I/O modules
Connects most of the internal hardware devices
PCI bus, ISA bus, EISA bus, SCSI, USB
Solution
What is an OS?
• Interface between application programs and hardware
• Ultimate control program
– Exploits hardware resources of one or more processors to provide a set of services to users
– Coordinates the use of hardware among various application programs for different users
– Manages secondary memory and I/O devices on behalf of its users
• Two different views of an OS
1. Extended machine view
– Virtual machine that is easier to understand and program
– Tool to make programmer’s job easy
2. Resource manager view
– Tool to facilitate efficient operation of computer system
– Provides services to users; processor, memory, I/O, system bus
– Must be fair; not partial to any process, specially for process in the same class
– Must discriminate between different class of jobs with different service requirements
– Do the above efficiently
Within the constraints of fairness and efficiency, an OS should attempt to maximize throughput,.
More Related Content
Similar to 1. Pyruvate dehydrogenase is a large comples enzyme containing many .pdf
Citric Acid Cycle
The citric acid cycle is a series of chemical reactions in the mitochondria that break down acetyl groups from carbohydrates, fats, and proteins into carbon dioxide, generating reduced coenzymes used in oxidative phosphorylation to produce ATP. Pyruvate is converted to acetyl-CoA by the pyruvate dehydrogenase complex, then the citric acid cycle oxidizes acetyl-CoA in 8 steps, producing NADH, FADH2, and GTP or ATP while releasing CO2. This cycling of intermediates allows for the efficient breakdown of fuels to generate energy.
Tca cycle b.pharm
The document summarizes the three stages of catabolism:
1. Pyruvate is converted to acetyl-CoA in the mitochondria by the pyruvate dehydrogenase complex. This is the committed step to the citric acid cycle.
2. The pyruvate dehydrogenase complex contains three enzymes and requires five cofactors including thiamine pyrophosphate and Coenzyme A.
3. Acetyl-CoA then enters the citric acid cycle, which occurs in the mitochondrial matrix and fully oxidizes acetyl-CoA, producing carbon dioxide and reducing equivalents like NADH and FADH2.
citric acid cycle.pptx funtion and explained in detail
Citric acid is a versatile organic acid found in many fruits, especially citrus fruits like lemons, oranges, limes, and grapefruits. Its chemical formula is C6H8O7, and it's classified as a weak acid. Citric acid has a wide range of applications, from food and beverage production to household cleaning and skincare. In this comprehensive description, I'll delve into its properties, uses, production methods, health effects, and environmental impact.
*1. Properties of Citric Acid:*
Citric acid appears as a white crystalline powder or granules. It's odorless and has a tart, sour taste. It's highly soluble in water, making it easy to incorporate into various products. Citric acid is stable at room temperature but decomposes at higher temperatures, losing its acidic properties. It's a chelating agent, meaning it can bind to metal ions, making it useful in certain industrial processes and household cleaners.
*2. Sources of Citric Acid:*
While citric acid occurs naturally in citrus fruits, it's also produced commercially through microbial fermentation, primarily using strains of the fungus Aspergillus niger. This method allows for large-scale production of citric acid to meet the demand in various industries. Additionally, it can be synthesized chemically, although this method is less common due to higher production costs and environmental concerns.
*3. Uses of Citric Acid:*
*- Food and Beverage Industry:* Citric acid is widely used as a flavoring agent, acidity regulator, and preservative in the food and beverage industry. It enhances the flavor of many products and provides a tart taste in sodas, candies, jams, and preserves. It also acts as a preservative, extending the shelf life of packaged foods and preventing discoloration in fruits and vegetables.
*- Pharmaceutical Industry:* Citric acid is used in pharmaceuticals as a pH regulator, excipient in tablets and capsules, and as a flavoring agent in syrups and liquid medications.
*- Cleaning Products:* Due to its chelating properties, citric acid is used in household cleaning products such as descalers, bathroom cleaners, and dishwashing detergents. It effectively removes mineral deposits and stains without the need for harsh chemicals.
*- Cosmetics and Personal Care:* Citric acid is found in skincare products like exfoliating scrubs, facial peels, and anti-aging creams. It helps to promote skin renewal by gently removing dead skin cells and promoting collagen production.
*- Industrial Applications:* Citric acid is used in various industrial processes, including water softening, metal cleaning, and the production of detergents and surfactants.
*4. Production Methods:*
*- Microbial Fermentation:* This is the most common method for commercial production of citric acid. It involves fermenting glucose or sucrose-containing substrates with strains of Aspergillus niger in large-scale bioreactors. The fungus produces citric acid as a byproduct of its metabolism, which is then extracted and purified.
*- C
Some Q & A Metabolism - II | IGNOU Biochemistry CHE-09 (in English /Hinglish)
Metabolism ll - pyruvate dehydrogenase complex, substrate channeling, central role of TCA cycle, aconitase, anaplerosis, beta oxidation vs fatty acid synthesis
Terpenoids Biosynthesis
Plants produce a vast and diverse organic compounds, which do not appear to participate directly in growth and development.These substances traditionally referred to as secondary metabolites which terpenes are one of them.
Fatty Acid metabolism_oxidation, catabolism.ppt
This document provides an overview of lipids and related biomolecules. It discusses the structure and function of fatty acids, triglycerides, phospholipids, sterols like cholesterol, prostaglandins, terpenes and carotenoids. Key points covered include the biosynthesis of fatty acids from acetyl-CoA, the iterative process of fatty acid elongation, and the mevalonate pathway for biosynthesis of isopentyl diphosphate, the basic building block for terpenes and sterols. Biosynthesis of specific molecules like cholesterol, vitamin D, bile acids and sex hormones are also summarized.
11 krebs cycle
The Pyruvate Dehydrogenase complex catalyzes the conversion of pyruvate to acetyl-CoA and includes three enzymes: E1, E2, and E3. E1 uses thiamine pyrophosphate to oxidize pyruvate and transfer the acetyl group to E2. Lipoic acid covalently attached to E2 carries the acetyl group to E3, where it is transferred to CoA to form acetyl-CoA. Electrons are transferred through the complex to NAD+ to form NADH. The complex is regulated by phosphorylation/dephosphorylation of E1 and by product inhibition by NADH and acetyl-CoA. Acetyl-CoA produced
Enzyme classification (EC).ppt
The document describes the Enzyme Commission (EC) classification system for enzymes. It provides details on the hierarchical numbering scheme used to classify enzymes based on the chemical reactions they catalyze. Each EC number consists of up to four numbers that become progressively more specific. For example, EC 3.4.11.4 represents an enzyme that acts on peptide bonds (3.4), cleaves the amino-terminal amino acid from a polypeptide (3.4.11), and specifically cleaves a tripeptide (3.4.11.4). The document also lists some of the main EC classes and provides examples of enzymes within each class.
Chapter2 part2
The document discusses the key biomolecules that make up living organisms: carbohydrates, lipids, proteins, and nucleic acids. It describes their monomers and polymers, how they are assembled through condensation and hydrolysis reactions, and provides examples of their structures and functions in cells.
Plant metabolism and redox agents plant biochemistry ii
Role of redox reaction in plant metabolism and examples of oxidation and reduction reaction in plants, plant Biochemistry II
onecarbonmetabolismbscclass-161115134043 (1).pdf
Folic acid plays a key role in one-carbon metabolism and is essential for biosynthesis. It acts as a carrier of one-carbon groups for metabolic reactions. The biologically active form is tetrahydrofolate (THF), which carries various one-carbon derivatives to donate in reactions. THF participates in metabolic pathways like purine and pyrimidine synthesis, histidine catabolism, methionine synthesis, and protein synthesis. Deficiency can cause megaloblastic anemia and birth defects. Folic acid is obtained from green leafy vegetables and inhibited by sulphonamides and methotrexate.
One carbon metabolism
here I explained about one carbon metabolism in a simple way .this can be useful for both under graduates and postgraduates.
Krebs cycle/Citric acid cycle
The Krebs cycle summarizes a circular series of reactions in the mitochondria to metabolize AcCoA to two molecules of CO2 with the resultant generation of one molecule of GTP, three molecules of NADH, and one molecule of FADH2. GTP is equivalent to ATP in terms of energy charge.
FUNCTION: The main function of the Krebs cycle is to produce energy, stored and transported as ATP or GTP. The cycle is also central to other biosynthetic reactions where the intermediates produced are required to make other molecules, such as amino acids, nucleotide bases, and cholesterol.
Biomolecules carbohydrates, lipids, nucleic acid
The document discusses different types of biomolecules. It focuses on carbohydrates, lipids, nucleic acids and provides details about their structure, functions and classification. Carbohydrates include monosaccharides, oligosaccharides and polysaccharides. Major lipids are triacylglycerols, phospholipids and sterols. Nucleic acids are DNA and RNA which store and transmit genetic information.
Co enzymes
This document discusses co-enzymes and their functions. It defines co-factors as non-protein components that assist enzymes in biochemical transformations, and can be organic or inorganic. Organic co-factors include vitamins like NAD+, Coenzyme A, and flavin mononucleotide. Inorganic co-factors include metal ions like copper, iron, and magnesium. Co-enzymes are loosely bound co-factors that transport groups between enzymes, and include NAD+, Coenzyme A, flavin adenine dinucleotide, and adenosine triphosphate. Specific examples of enzymes requiring various co-enzymes are provided.
Structure And Function Of Macromolecules1
Macromolecules are polymers formed from monomers through dehydration or condensation reactions. Carbohydrates, proteins, lipids, and nucleic acids are the four major macromolecules. Carbohydrates include simple sugars and complex polysaccharides used for energy storage and structural support. Proteins are polymers of amino acids with primary, secondary, tertiary, and quaternary levels of structure determining their function. Lipids are nonpolar hydrophobic molecules including fats, oils, and steroids that serve roles in energy storage, insulation, and cell membranes. Nucleic acids like DNA are composed of nucleotides with phosphate, sugar, and nitrogenous base components that determine their information-storing roles.
Structure And Function Of Macromolecules1
Macromolecules are polymers formed from monomers through dehydration or condensation reactions. Carbohydrates, proteins, lipids, and nucleic acids are major macromolecules. Carbohydrates include simple sugars and complex polysaccharides used for energy storage and structure. Proteins are polymers of amino acids with four levels of structure determining their function. Lipids are nonpolar and include fats, oils, and phospholipids that serve structural and energy roles. Nucleic acids like DNA are composed of nucleotides with phosphate, sugar and nitrogenous base components.
Cellular Energy Transfer (Glycolysis and Krebs Cycle) and ATP
This presentation is all about Cellular Energy Transfer with reference to Glycolysis and Kreb Cycle with all their stages involved.
It also includes ATP production in the body, its importance, structure.
Also contains a comparison of energy production in Krebs and Glycolysis cycle.
Lipid chemistry V2 By Dr Anurag Yadav
Lipid chemistry, classification, properties and details of the Lipids, fatty acids and Lipoproteins are discussed. MBBS, BDS, BSc, MSc, Nursing etc
Lipids
Lipids are organic molecules that are nonpolar and insoluble in water. They include fatty acids, glycerides like triglycerides found in fats and oils, phospholipids that make up cell membranes, and sterols like cholesterol. Lipids serve important functions like energy storage, forming cell membranes, and acting as chemical messengers. They can be classified based on their building blocks, which include fatty acids, glycerol, sphingosine, and steroid rings. Major lipid types include fatty acids, triglycerides, phospholipids, sphingolipids, and steroids.
Similar to 1. Pyruvate dehydrogenase is a large comples enzyme containing many .pdf (20)
citric acid cycle.pptx funtion and explained in detail
citric acid cycle.pptx funtion and explained in detail
Some Q & A Metabolism - II | IGNOU Biochemistry CHE-09 (in English /Hinglish)
Some Q & A Metabolism - II | IGNOU Biochemistry CHE-09 (in English /Hinglish)
Plant metabolism and redox agents plant biochemistry ii
Plant metabolism and redox agents plant biochemistry ii
Cellular Energy Transfer (Glycolysis and Krebs Cycle) and ATP
Cellular Energy Transfer (Glycolysis and Krebs Cycle) and ATP
More from aparnacollection
}Solution}.pdf
The document discusses a solution for improving the efficiency of solar panels. It proposes coating solar panels with a new material that can absorb more wavelengths of light, increasing energy absorption by 40%. This coating material is inexpensive to produce and easy to apply, allowing for widespread implementation of more effective solar energy technology.
What is an OS • Interface between application programs and hardwa.pdf
What is an OS?
• Interface between application programs and hardware
• Ultimate control program
– Exploits hardware resources of one or more processors to provide a set of services to users
– Coordinates the use of hardware among various application programs for different users
– Manages secondary memory and I/O devices on behalf of its users
• Two different views of an OS
1. Extended machine view
– Virtual machine that is easier to understand and program
– Tool to make programmer’s job easy
2. Resource manager view
– Tool to facilitate efficient operation of computer system
– Provides services to users; processor, memory, I/O, system bus
– Must be fair; not partial to any process, specially for process in the same class
– Must discriminate between different class of jobs with different service requirements
– Do the above efficiently
Within the constraints of fairness and efficiency, an OS should attempt to maximize throughput,
minimize
response time, and accommodate as many users as possible
Basic elements
• A computer has a number of modules, with possibly more than one instance of each
• Processor/CPU
– Controls the operations of computer and performs data processing functions
– Exchanges data with memory using memory address register and memory buffer register
– Exchanges data with I/O devices using I/O address register and I/O buffer register
• Main memory/Primary memory
– Stores data and programs
– Typically volatile
– Abstracted as a set of locations, defined by sequentially numbered addresses
– Each location contains a bit pattern to be interpreted as either an instruction or data
• I/O modules/architecture
– Move data between a computer and external environment
– Communicate with a variety of devices including secondary memory (disks), communications
equipment, and
terminals
– Data flows between CPUs, RAM and I/O devices over buses
– System bus
Provides for communications among processors, main memory, and I/O modules
Connects most of the internal hardware devices
PCI bus, ISA bus, EISA bus, SCSI, USB
Solution
What is an OS?
• Interface between application programs and hardware
• Ultimate control program
– Exploits hardware resources of one or more processors to provide a set of services to users
– Coordinates the use of hardware among various application programs for different users
– Manages secondary memory and I/O devices on behalf of its users
• Two different views of an OS
1. Extended machine view
– Virtual machine that is easier to understand and program
– Tool to make programmer’s job easy
2. Resource manager view
– Tool to facilitate efficient operation of computer system
– Provides services to users; processor, memory, I/O, system bus
– Must be fair; not partial to any process, specially for process in the same class
– Must discriminate between different class of jobs with different service requirements
– Do the above efficiently
Within the constraints of fairness and efficiency, an OS should attempt to maximize throughput,.
Using a broad definition of file(note that it doesnt count h.pdf
Using a broad definition of \"file\"
(note that it doesn\'t count hidden files and assumes that file names don\'t contain newline
characters).
To include hidden files (except . and ..) and avoid problems with newline characters, the
canonical way is:
Or recursively:
Solution
Using a broad definition of \"file\"
(note that it doesn\'t count hidden files and assumes that file names don\'t contain newline
characters).
To include hidden files (except . and ..) and avoid problems with newline characters, the
canonical way is:
Or recursively:.
unable to open it ....it asks for username and passwordSolution.pdf
unable to open it ....it asks for username and password
Solution
unable to open it ....it asks for username and password.
This is called a dehydrationreaction. a) H2SO4 H20Solution.pdf
This is called a dehydrationreaction.
a) H2SO4 / H20
Solution
This is called a dehydrationreaction.
a) H2SO4 / H20.
The multiplication sign simply means that the molecules have their i.pdf
The multiplication sign simply means that the molecules have their independent existance in the
compound. For example the formula you have given has three species in solution ZnCO3, 2
molecules of Zn(OH)2 and 1 molecule of water H20 for each molecule of your compound. These
species are bonded to each other but the bonds between the atoms of the participating molecules
are not broken. To get the molar mass of the compound simply add the molar masses of
indivisual molecules multiplied by number of molecules they are contributing. Thus for
ZnCO3*2Zn(OH)2*1H20 the molar mass would be:
Molar mass of ZnCO3 + 2*(Molar mass of Zn(OH)2) + Molar mass of H2O
= 125.4 + 2*99.4 + 18
= 342.2 g/mol
Solution
The multiplication sign simply means that the molecules have their independent existance in the
compound. For example the formula you have given has three species in solution ZnCO3, 2
molecules of Zn(OH)2 and 1 molecule of water H20 for each molecule of your compound. These
species are bonded to each other but the bonds between the atoms of the participating molecules
are not broken. To get the molar mass of the compound simply add the molar masses of
indivisual molecules multiplied by number of molecules they are contributing. Thus for
ZnCO3*2Zn(OH)2*1H20 the molar mass would be:
Molar mass of ZnCO3 + 2*(Molar mass of Zn(OH)2) + Molar mass of H2O
= 125.4 + 2*99.4 + 18
= 342.2 g/mol.
SolutionThe variance of individual assets is measure of total ris.pdf
The variance of individual assets measures total risk, but in a well-diversified portfolio only systematic risk matters as unsystematic risk is reduced. The variance of a diversified portfolio depends on its systematic risk, known as beta. Therefore, the statement in the question is false.
soldefnition of critical thinkingit is an intellectual process o.pdf
sol:
defnition of critical thinking:it is an intellectual process of applying ,analyizing,evaluating
information by means of observation which leads to believe in action
a. When you consider all the different perspectives on a topic and evaluate how true or
applicable they are in a given context.
Solution
sol:
defnition of critical thinking:it is an intellectual process of applying ,analyizing,evaluating
information by means of observation which leads to believe in action
a. When you consider all the different perspectives on a topic and evaluate how true or
applicable they are in a given context..
Program-a. library is importedimport java.awt.; import j.pdf
Program:-
a.
// library is imported
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import javax.swing.*;
public class JPasswordA extends Applet implements ActionListener //Class Applet is //extended
using inheritance
{boolean clicked=false,code=false; // Boolean function is defined
Label passwordlabel = new Label(\"Password:\"); // object creation
TextField passwordfield = new TextField(15); // text field is assigned to the password
Button enterbutton = new Button(\"Enter\");
public void init() // initialization method is defined
{
add(passwordlabel);
add(passwordfield);
add(enterbutton);
enterbutton.addActionListener(this); // button and password field is set
passwordlabel.setVisible(true);
passwordfield.setVisible(true);
}
public void actionPerformed(ActionEvent e) // method
{ String pass;
clicked=true;
pass=passwordfield.getText();
if(pass.compareTo(\"Rosebud\")==0) // conditional statement is defined
code=true;
else
code=false;
repaint();
}
public void paint(Graphics g) //paint method is defined
{
if(clicked)
{if(code)
g.drawString(\"Access Granted\",120,150); // according to question.
else
g.drawString(\"Access Denied\",120,150);
}
}
}
b.
// library is imported
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import javax.swing.*;
public class JPasswordB extends Applet implements ActionListener//Class Applet is //extended
using inheritance
{boolean clicked=false,code=false; // Boolean function is defined
Label passwordlabel = new Label(\"Password:\"); // object creation
TextField passwordfield = new TextField(15); // text field is assigned to the password
Button enterbutton = new Button(\"Enter\");
public void init()// initialization method is defined
{
add(passwordlabel);
add(passwordfield);
add(enterbutton);
enterbutton.addActionListener(this);
passwordlabel.setVisible(true); // button and password field is set
passwordfield.setVisible(true);
}
public void actionPerformed(ActionEvent e) // method
{ String pass;
clicked=true;
pass=passwordfield.getText();
if(pass.compareToIgnoreCase(\"Rosebud\")==0) // conditional statement is defined
code=true;
else
code=false;
repaint();
}
public void paint(Graphics g) //paint method is defined
{
if(clicked)
{if(code)
g.drawString(\"Access Granted\",120,150); // according to question.
else
g.drawString(\"Access Denied\",120,150);
}
}
}
c.
// library is imported
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import javax.swing.*;
public class JPasswordC extends Applet implements ActionListener //Class Applet is //extended
using inheritance
{boolean clicked=false,code=false;
Label passwordlabel = new Label(\"Password:\"); // Boolean function is defined
TextField passwordfield = new TextField(15);
Button enterbutton = new Button(\"Enter\"); // object creation
public void init()// text field is assigned to the password
{
add(passwordlabel);
add(passwordfield);
add(enterbutton);
enterbutton.addActionListener(this); // button and password field is set
p.
package com.test;public class Team { private String teamId;.pdf
package com.test;
public class Team {
private String teamId;
private String teamName;
private String pFirstName;
private String pLastName;
private String pemail;
private String phoneNumber;
public String getTeamId() {
return teamId;
}
public void setTeamId(String teamId) {
this.teamId = teamId;
}
public String getTeamName() {
return teamName;
}
public void setTeamName(String teamName) {
this.teamName = teamName;
}
public String getpFirstName() {
return pFirstName;
}
public void setpFirstName(String pFirstName) {
this.pFirstName = pFirstName;
}
public String getpLastName() {
return pLastName;
}
public void setpLastName(String pLastName) {
this.pLastName = pLastName;
}
public String getPemail() {
return pemail;
}
public void setPemail(String pemail) {
this.pemail = pemail;
}
public String getPhoneNumber() {
return phoneNumber;
}
public void setPhoneNumber(String phoneNumber) {
this.phoneNumber = phoneNumber;
}
public String toString() {
return \"Team [teamId=\" + teamId + \", teamName=\" + teamName
+ \", pFirstName=\" + pFirstName + \", pLastName=\" + pLastName
+ \", pemail=\" + pemail + \", phoneNumber=\" + phoneNumber + \"]\";
}
public Team(String teamId, String teamName, String pFirstName,
String pLastName, String pemail, String phoneNumber) {
super();
this.teamId = teamId;
this.teamName = teamName;
this.pFirstName = pFirstName;
this.pLastName = pLastName;
this.pemail = pemail;
this.phoneNumber = phoneNumber;
}
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result
+ ((pFirstName == null) ? 0 : pFirstName.hashCode());
result = prime * result
+ ((pLastName == null) ? 0 : pLastName.hashCode());
result = prime * result + ((pemail == null) ? 0 : pemail.hashCode());
result = prime * result
+ ((phoneNumber == null) ? 0 : phoneNumber.hashCode());
result = prime * result + ((teamId == null) ? 0 : teamId.hashCode());
result = prime * result
+ ((teamName == null) ? 0 : teamName.hashCode());
return result;
}
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
Team other = (Team) obj;
if (pFirstName == null) {
if (other.pFirstName != null)
return false;
} else if (!pFirstName.equals(other.pFirstName))
return false;
if (pLastName == null) {
if (other.pLastName != null)
return false;
} else if (!pLastName.equals(other.pLastName))
return false;
if (pemail == null) {
if (other.pemail != null)
return false;
} else if (!pemail.equals(other.pemail))
return false;
if (phoneNumber == null) {
if (other.phoneNumber != null)
return false;
} else if (!phoneNumber.equals(other.phoneNumber))
return false;
if (teamId == null) {
if (other.teamId != null)
return false;
} else if (!teamId.equals(other.teamId))
return false;
if (teamName == null) {
if (other.teamName != null)
return false;
} else if (!teamName.equals(other.teamName))
return false;
return true;
}
}
package com.test;
import java.util.Date;
public class Game {
private String gameId;
priv.
Given below is the completed code along with comments. Output of the.pdf
Given below is the completed code along with comments. Output of the program is shown at the
end. You will need to create an input file containing multiple lines of input as specified in the
question. I have given a sample input file with just 1 line of input.
Please do rate the answer if it helped. Thank you very much.
#include
/*
extractBits extracts the specified number of bits starting specified start location from left.
bit numbering starts with 0 from left. len specifies the number of bits to extract.
So extract leftmost 4 bits of a number n, the call should be extractBits(n, 0, 4). Here start = 0
means the 0th bit from left.
Similarly to extract bit 16 through 20 (i.e 5 bits), we use extractBits(n, 16, 5)
The way this function works is - First calculate the remaining number of bits on the rightside .
Since int takes 32 bits, we subtract (start+len) from 32 to get remaining bits on right.
it first clears all the bits upto starting bit by left shift <<
by start bits. Now we shift back the same number of times to right +
*/
int extractBits(unsigned n, int start, int len)
{
int rightRemaining = 32 - (start + len);
//shift left and then right by start no. of bits clears leftside bits
n = (n << start) >> start;
//now shifting by remaining number of bits on right will extract only needed bits
n = n >> rightRemaining;
return n;
}
int main (int argc, char *argv[]) {
// Get the filename to open, then open the file. If we can\'t
// open the file, complain and quit.
char *filename;
// *** Your Code *** if argv[1] exists, set filename to it,
// otherwise set filename to \"Lab3_data.txt\";
if(argv[1] != NULL)
filename = argv[1];
else
filename = \"Lab3_data.txt\";
// Open the file; if opening fails, say so and return 1.
// otherwise say what file we\'re reading from.
FILE *in_file;
in_file = fopen(filename, \"r\"); // NULL if the open failed
// *** Your Code *** if in_file is NULL, complain and quit
// otherwise say that we\'ve opened the filename
if (in_file == NULL){
printf(\"Couldn\'t open file %s\ \", filename);
return 1;
}
printf(\"Opened file %s for reading...\ \", filename);
// Repeatedly read and process each line of the file. The
// line should have a hex integer and two integer lengths.
int val, len1, len2, len3;
int nbr_vals_on_line
= fscanf(in_file, \"%x %d %d\", &val, &len1, &len2);
// Read until we hit end-of-file or a line without the 3 values.
while (nbr_vals_on_line == 3) {
// We\'re going to break up the value into bitstrings of
// length len1, len2, and len3 (going left-to-right).
// The user gives us len1 and len2, and we calculate
// len3 = the remainder of the 32 bits of value.
// All three lengths should be > 0, else we complain
// and go onto the next line.
//
len3 = 32 - (len1 + len2);
// *** Your Code***
// if any of the lengths aren\'t > 0,
// print out the value and the lengths and complain
// about the lengths not all being positive
if(len1 <= 0 || len2 <= 0 || len3 <= 0)
{
printf(\"Invalid lengths : len1=%d, len2=%d, len.
(a) The American Institute of Certified Accountants. (AICPA)(b) Th.pdf
(a) The American Institute of Certified Accountants. (AICPA)
(b) This Statement establishes accounting and financial reporting standards for public colleges
and universities within the financial reporting guidelines of GASB Statement No. 34, Basic
Financial Statements-and Management’s Discussion and Analysis-for State and Local
Governments. The standards are designed to provide financial information that responds to the
needs of three groups of primary users of general purpose external financial reports: the
citizenry, legislative and oversight bodies, and investors and creditors. Generally, this
amendment to Statement 34 permits public colleges and universities, in separately issued
financial statements, to use the guidance for special-purpose governments engaged only in
business-type activities, engaged only in governmental activities, or engaged in both
governmental and business-type activities in their separately issued reports. Under this guidance,
in its separately issued reports, a public institution is required to include management’s
discussion and analysis (MD&A); basic financial statements, as appropriate for the category of
special-purpose government reporting selected; notes to the financial statements; and required
supplementary information other than MD&A.
Unless otherwise specified, pronouncements of the GASB apply to financial reports of all state
and local governmental entities, including general purpose governments, public benefit
corporations and authorities, and public employee retirement systems, utilities, hospitals and
other healthcare providers, and colleges and universities. Paragraph 2 discusses the applicability
of this Statement.
(c) A statement of financial position, including accompanying notes to financial statements,
provides relevant information about liquidity, financial flexibility, and the interrelationship of an
organization\'s assets and liabilities. That information generally is provided by aggregating assets
and liabilities that possess similar characteristics into reasonably homogeneous groups. For
example, entities generally report individual items of assets in homogeneous groups, such as
cash and cash equivalents; accounts and notes receivable from patients, students, members, and
other recipients of services; inventories of materials and supplies; deposits and prepayments for
rent, insurance, and other services; marketable securities and other investment assets held for
long-term purposes; and land, buildings, equipment, and other long-lived assets used to provide
goods and services. Cash or other assets received with a donor-imposed restriction that limits
their use to long-term purposes should not be classified with cash or other assets that are
unrestricted and available for current use.
(d) A statement of activities shall report revenues as increases in unrestricted net assets unless
the use of the assets received is limited by donor-imposed restrictions. For example, fees from
rendering servic.
Yes. The compound is actively active. It is mainl.pdf
Yes. The compound is actively active. It is mainly caused by the carbon to the right
of the 2 oxygens. I think i forgot about the stereoisomers when I last answered them. The number
of stereoisomers is dependent on the number of chiral centers. Since there are 3 chiral centers, it
is 2^3, which is 8 possible stereoisomers. So I mentioned before that the chiral centers are the
carbons directly to the right and left of the oxygens. All the bonds in the ring structure are in the
plane. The other 2 bonds can be alternated to be pointing inside the page or out of the page. That
is why if you have 3 carbon centers, it is just a matter of probability of 2^3 (2 possible choices
over 3 possible carbons) which give you 8. And as I previously explained: To be optically
active, you need to have chiral center, which is any carbon with 4 different subgroups. There is 3
such centers. The carbons to the left of both oxygens (this makes up 2 carbons) are chirally
active since they have 4 different groups. However, since they are mirror images of each other,
they cancel each other out. It is the third and final carbon to the right of both oxygens, that
makes this compound chirally active. Since it has also 4 different groups attached to the carbon
and is not canceled out by anything. One simple way to test if something is optically active is to
see if it is a mirror image of itself. If it is not a mirror image and it has at least 1 chiral center,
then it is optically active
Solution
Yes. The compound is actively active. It is mainly caused by the carbon to the right
of the 2 oxygens. I think i forgot about the stereoisomers when I last answered them. The number
of stereoisomers is dependent on the number of chiral centers. Since there are 3 chiral centers, it
is 2^3, which is 8 possible stereoisomers. So I mentioned before that the chiral centers are the
carbons directly to the right and left of the oxygens. All the bonds in the ring structure are in the
plane. The other 2 bonds can be alternated to be pointing inside the page or out of the page. That
is why if you have 3 carbon centers, it is just a matter of probability of 2^3 (2 possible choices
over 3 possible carbons) which give you 8. And as I previously explained: To be optically
active, you need to have chiral center, which is any carbon with 4 different subgroups. There is 3
such centers. The carbons to the left of both oxygens (this makes up 2 carbons) are chirally
active since they have 4 different groups. However, since they are mirror images of each other,
they cancel each other out. It is the third and final carbon to the right of both oxygens, that
makes this compound chirally active. Since it has also 4 different groups attached to the carbon
and is not canceled out by anything. One simple way to test if something is optically active is to
see if it is a mirror image of itself. If it is not a mirror image and it has at least 1 chiral center,
then it is optically active.
The probability of A and its complement will sum to oneSolution.pdf
The probability of A and its complement will sum to one
Solution
The probability of A and its complement will sum to one.
H+,CN-Solution H+,CN-.pdf
This document contains chemical symbols for hydrogen ions and cyanide ions in solution. It indicates that hydrogen ions and cyanide ions are present together in an aqueous solution. The document provides a brief representation of the composition of an ionic solution through chemical symbols but does not include additional context or details.
Adding elements public void add(String element) { For fi.pdf
// Adding elements
public void add(String element) {
// For first element Head is null. So, create a new node and mark it as head.
// and increase numElements
if(head == null){
head = new StringNode(element, null);
numElements++;
} else {
// if not, find its place first.
// then create a node and mark position link to new node
// mark new node as link to positional node
StringNode node = head;
while(node.getLink() != null){
if(node.getData().compareTo(element) < 0){
break;
}
}
StringNode newNode = new StringNode(element, null);
newNode.setLink(node.getLink());
node.setLink(newNode);
numElements++;
}
}
// Removing elements
public boolean remove(String target)
{
StringNode targetNode = head;
boolean found = false;
while (targetNode!= null && !found)
{
if(targetNode.getData().equalsIgnoreCase(target))
found = true;
else
targetNode = targetNode.getLink();
}
if(found)
{
// copy the head to targetNode
// and then advance head to the next node.
targetNode.setData(targetNode.getLink().getData());
targetNode.setLink(targetNode.getLink());
numElements --;
}
return found;
}
Solution
// Adding elements
public void add(String element) {
// For first element Head is null. So, create a new node and mark it as head.
// and increase numElements
if(head == null){
head = new StringNode(element, null);
numElements++;
} else {
// if not, find its place first.
// then create a node and mark position link to new node
// mark new node as link to positional node
StringNode node = head;
while(node.getLink() != null){
if(node.getData().compareTo(element) < 0){
break;
}
}
StringNode newNode = new StringNode(element, null);
newNode.setLink(node.getLink());
node.setLink(newNode);
numElements++;
}
}
// Removing elements
public boolean remove(String target)
{
StringNode targetNode = head;
boolean found = false;
while (targetNode!= null && !found)
{
if(targetNode.getData().equalsIgnoreCase(target))
found = true;
else
targetNode = targetNode.getLink();
}
if(found)
{
// copy the head to targetNode
// and then advance head to the next node.
targetNode.setData(targetNode.getLink().getData());
targetNode.setLink(targetNode.getLink());
numElements --;
}
return found;
}.
1) Investment Grade Domestic Bonds As bond bears a fixed rate of i.pdf
1) Investment Grade Domestic Bonds As bond bears a fixed rate of interest hence Mutual
Fund or ETFS can\'t Represent Bonds as an asset class. 2) High Yield Bonds 3) Domestic
stock Both are consist of shares and debentures so Mutual Fund or ETFS can\'t Represent them
as an asset class. 4) International Stock 6) Energy Similarly ETF and Mutual fund never
meet the defination of these 3 asset class so can\'t represent them 7) Commodities 8) Real
Estate 5)E merging Market Stock An emerging market fund is a mutual fund or ETF
that invests the bulk of its assets in stocks of developing countries. E merging countries are
those which are not developed yet in the stage of development i.e. china, india etc. so
invetment in these fund brings highest reurn for prospective investor. So
ETF and Mutual fund Represents E merging market stock.
Solution
1) Investment Grade Domestic Bonds As bond bears a fixed rate of interest hence Mutual
Fund or ETFS can\'t Represent Bonds as an asset class. 2) High Yield Bonds 3) Domestic
stock Both are consist of shares and debentures so Mutual Fund or ETFS can\'t Represent them
as an asset class. 4) International Stock 6) Energy Similarly ETF and Mutual fund never
meet the defination of these 3 asset class so can\'t represent them 7) Commodities 8) Real
Estate 5)E merging Market Stock An emerging market fund is a mutual fund or ETF
that invests the bulk of its assets in stocks of developing countries. E merging countries are
those which are not developed yet in the stage of development i.e. china, india etc. so
invetment in these fund brings highest reurn for prospective investor. So
ETF and Mutual fund Represents E merging market stock..
When atoms share one or more pairs of electrons t.pdf
When atoms share one or more pairs of electrons the bonds are called covalent
bonds.
Solution
When atoms share one or more pairs of electrons the bonds are called covalent
bonds..
This is quite simple to do. Barium sulfate is ins.pdf
This is quite simple to do. Barium sulfate is insoluble in water and sodium chloride
is soluble in water. So this is what you do. Dump them both in water. As I said the NaCl will
dissolve. Then do vacuum or suction filtration. That will filter out the barium sulfate from the
solution. Now the two are separate. To get the NaCl out of the water just boil it off.
Solution
This is quite simple to do. Barium sulfate is insoluble in water and sodium chloride
is soluble in water. So this is what you do. Dump them both in water. As I said the NaCl will
dissolve. Then do vacuum or suction filtration. That will filter out the barium sulfate from the
solution. Now the two are separate. To get the NaCl out of the water just boil it off..
Step1 Cocentration of NaCl =.250 moles Step2 Mol.pdf
Step1 Cocentration of NaCl =.250 moles Step2 Molarity =[ concentration in
moles]/volume in litres Step3 Molarity =.250/2 =.125
Solution
Step1 Cocentration of NaCl =.250 moles Step2 Molarity =[ concentration in
moles]/volume in litres Step3 Molarity =.250/2 =.125.
More from aparnacollection (20)
What is an OS • Interface between application programs and hardwa.pdf
What is an OS • Interface between application programs and hardwa.pdf
Using a broad definition of file(note that it doesnt count h.pdf
Using a broad definition of file(note that it doesnt count h.pdf
unable to open it ....it asks for username and passwordSolution.pdf
unable to open it ....it asks for username and passwordSolution.pdf
This is called a dehydrationreaction. a) H2SO4 H20Solution.pdf
This is called a dehydrationreaction. a) H2SO4 H20Solution.pdf
The multiplication sign simply means that the molecules have their i.pdf
The multiplication sign simply means that the molecules have their i.pdf
SolutionThe variance of individual assets is measure of total ris.pdf
SolutionThe variance of individual assets is measure of total ris.pdf
soldefnition of critical thinkingit is an intellectual process o.pdf
soldefnition of critical thinkingit is an intellectual process o.pdf
Program-a. library is importedimport java.awt.; import j.pdf
Program-a. library is importedimport java.awt.; import j.pdf
package com.test;public class Team { private String teamId;.pdf
package com.test;public class Team { private String teamId;.pdf
Given below is the completed code along with comments. Output of the.pdf
Given below is the completed code along with comments. Output of the.pdf
(a) The American Institute of Certified Accountants. (AICPA)(b) Th.pdf
(a) The American Institute of Certified Accountants. (AICPA)(b) Th.pdf
Yes. The compound is actively active. It is mainl.pdf
Yes. The compound is actively active. It is mainl.pdf
The probability of A and its complement will sum to oneSolution.pdf
The probability of A and its complement will sum to oneSolution.pdf
Adding elements public void add(String element) { For fi.pdf
Adding elements public void add(String element) { For fi.pdf
1) Investment Grade Domestic Bonds As bond bears a fixed rate of i.pdf
1) Investment Grade Domestic Bonds As bond bears a fixed rate of i.pdf
When atoms share one or more pairs of electrons t.pdf
When atoms share one or more pairs of electrons t.pdf
This is quite simple to do. Barium sulfate is ins.pdf
This is quite simple to do. Barium sulfate is ins.pdf
Step1 Cocentration of NaCl =.250 moles Step2 Mol.pdf
Step1 Cocentration of NaCl =.250 moles Step2 Mol.pdf
Recently uploaded
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Recently uploaded (20)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
1. Pyruvate dehydrogenase is a large comples enzyme containing many .pdf
- 1. 1. Pyruvate dehydrogenase is a large comples enzyme containing many copies of each of three enzyme called E1, E2 and E3. 2. Pyruvate dehydrogenase(E1) has TPP prosthetic groups. Dihyrolipoyl transacetylase(E2) has Lipoamide prosthetic groups, similarly Dihydrolipyl dehydrogenase(E3) has FAD prosthetic group. 3. Dihyrolipoamide and lipoamide can be interconverted. Lipoamide consists of lipoic acid linked via an amid bond to sigma amino groups of a Lys residue. 4. Hydroxyethyl group derived from pyruvate attacks the lipoamide disulfide, and TPP is eliminated. Dihydroxyethyl carbanion oxidised to acetyle group and lipoamide disulfide is reduced. 5. E2 then catalyses to transfer of acetyle group to CoA to acetyle CoA and dihydrolipoamideE2. 6. Dihydrolipoyl dehydrogenase reoxidizes dihydrolipoamide to complete catalytic cycle of E2. The oxidized E3 contains a reactive Cys-Cys disulfide bond and a tightly bound FAD. 7. Finally, reduced E3 is reoxidized. The sulfhydryl groups are reoxidized by a mechanish in which FAD funnels electrons to NAD+ yielding NADH. Solution 1. Pyruvate dehydrogenase is a large comples enzyme containing many copies of each of three enzyme called E1, E2 and E3. 2. Pyruvate dehydrogenase(E1) has TPP prosthetic groups. Dihyrolipoyl transacetylase(E2) has Lipoamide prosthetic groups, similarly Dihydrolipyl dehydrogenase(E3) has FAD prosthetic group. 3. Dihyrolipoamide and lipoamide can be interconverted. Lipoamide consists of lipoic acid linked via an amid bond to sigma amino groups of a Lys residue. 4. Hydroxyethyl group derived from pyruvate attacks the lipoamide disulfide, and TPP is eliminated. Dihydroxyethyl carbanion oxidised to acetyle group and lipoamide disulfide is reduced. 5. E2 then catalyses to transfer of acetyle group to CoA to acetyle CoA and dihydrolipoamideE2. 6. Dihydrolipoyl dehydrogenase reoxidizes dihydrolipoamide to complete catalytic cycle of E2. The oxidized E3 contains a reactive Cys-Cys disulfide bond and a tightly bound FAD. 7. Finally, reduced E3 is reoxidized. The sulfhydryl groups are reoxidized by a mechanish in which FAD funnels electrons to NAD+ yielding NADH.