Grade 8 Integrated Science Chapter 9 Lesson 3 on energy changes, chemical reactions, endothermic and exothermic reactions, and activation energy. Understanding a reaction potential energy diagram.
2. Energy Changes
• To propel a space shuttle, scientists use
rocket fuel.
• The shuttle’s main engines burn almost 2
million L of liquid hydrogen and liquid oxygen.
• The reaction produces water vapor and a lot
of energy.
• The heat energy causes the water vapor to
heat to high temperatures.
• The rapidly expanding water vapor pushes
the shuttle.
3. Chemical Energy in Bonds
• Chemical bond contain a form of energy
called chemical energy
– Breaking a bond absorbs energy from the
surroundings.
– The formation of a bond releases energy to the
surroundings.
– Some chemical reactions release more energy
then they absorb.
– Others absorb more than they release
– You can detect these energy changes by
recording the temperature of the surroundings.
4. Endothermic Reactions –
Energy Absorbed
• Chemical reactions that absorb thermal
energy are endothermic reactions
• For an endothermic reaction to continue,
energy must be constantly added.
• In these reactions more energy is required
to break bonds of the reactant than is
released when the products form.
• Therefore, the overall reaction absorbs
energy.
5.
6. Exothermic Reactions – Energy
Released
• An exothermic reaction is a chemical
reaction that releases thermal energy
• In an exothermic reaction, more energy is
released when the products form than is
required to break the bonds in the
reactants.
• Therefore, the overall reaction releases
energy
10. Activation Energy
• Many reactions do not start by themselves.
– Paper does not burn when it touches oxygen. Fire
is required.
• All reactions require energy to start the
breaking of bonds.
• This is called activation energy.
• Activation energy is the minimum amount of
energy needed to start a chemical reaction.
– Different reactions require different activation
energies
11. Activation Energy
• The rusting of iron is a reaction that has a low
activation energy.
– The energy in the surroundings is enough to start
the process.
• Other reactions require more energy and
have high activation energy
– The burning of wood requires the energy of a
flame.
– Once the reaction starts, the reaction itself
releases enough energy to keep the reaction
going.
12.
13. Reaction Rates
• Some reactions happen quickly, while others
happen very slowly
– Fireworks explode in seconds
– The rate of reaction is the speed at which it
occurs.
• For a chemical reaction to occur, particles
must collide in the right orientation with
enough energy to break the bonds
– Chemical reactions occur faster of particles
collide more often or move faster when they
collide.
http://youtu.be/2pXyJ7P0B0k
14. Several Factors Affect Reaction
Rates
•
•
•
•
•
Surface Area
Temperature
Concentration and Pressure
Catalysts
Inhibitors
15. Surface Area
• Surface area is the amount of exposed,
outer area of a solid.
• Increased surface area increases reaction
rate because more particles on the
surface if a solid come into contact with
the particles of another substance.
– Consider a piece of chalk versus the same
amount of chalk powder.
http://youtu.be/FJtwkum_QAY?t=1m3s
16.
17. Temperature
• At higher temperatures, the average
speed of particles is greater
• This speeds reactions in two ways
– First, particles collide more often
– Second, collisions with more energy are more
likely to break chemical bonds
18. Concentration and Pressure
• Increasing the concentration of one or
more reactants increases collisions
between particles.
• More collisions results in a faster reaction
rate.
• In gases an increase in pressure pushes
gas particles closer together
• When they are close, more collisions
occur
19.
20. Catalysts
• A catalyst is a substance that increases
reaction rate by lowering the activation
energy of a reaction.
– One way catalysts speed reactions is by helping
reactant particles contact each other more often
– A catalyst isn’t changed in a reaction, and it
doesn’t change the reactants or products
– A catalyst doesn’t increase the amount of
reactant used or the amount of product that is
made.
21.
22. Catalyst
• Catalyst are not changed, so they are not
considered reactants
• Your body is filled with catalysts called
enzymes.
• An enzyme is a catalyst that speeds up
chemical reactions in living cells.
– The enzyme protease breaks the protein
molecules that can be absorbed by your intestine.
– Without protease the reaction would occur too
slowly and we could not survive.
23. Inhibitors
• An inhibitor is a substance that slows, or
even stops, a chemical reaction caused by
an enzyme.
• Inhibitor are often used on our foods.
Preservatives are inhibitors that slow the
processes that cause food to spoil.