2. Set Boot Priority 1 your USB Bootable Operating
System Windows Server 2008 R2
1st Boot Device Set to USB Device then press F10 to Save and Exit
1
NOTE:
In other BIOS Setting
F10, F4 are use to
Save and Exit
3. Windows Server 2008R2 First Installation Page.
Click Next or press Alt N to
Continue…
2
4. Windows Server 2008R2 Second Installation Page.
Click Install now or press Alt I to
Continue…
3
5. Windows Server 2008R2 Third Installation Page.
Select Windows Server 2008 R2
Standard and Click Next or press
Alt N
4
Select Windows Server 2008 R2
Enterprise and Click Next or press
Alt N
Note: Choose only one of Operating System for
Server for Installation….
6. Note: if the disk 0 Unallocated Space total size
is approximately equal to 500GB or less than
300GB.
Create a Two Partition
Partition1 system reserved Default System
Partition 2=Set 100GB Drive C
Partition 3=Set remain available free space
Drive D
Windows Server 2008R2 additional option for
partition.5
Important Button
New=To create Partition
Format=To Format the selected Partition
Delete=To Delete the Partition
NOTE: For Installation the Operating System.
For Dual Boot OS Install Windows Server 2008R2
in Partition 3 otherwise if NOT Dual Boot install in
Partition 2.
7. Windows Server 2008R2 Installation windows.
Once the process continue to
finishing up the computer will
restart …and continue…
5
Note: Once computer restarted DO
NOT FORGET to Open BIOS.. and
1. Set 1st Boot Device Priority 1 to
HDD (INTERNAL HARD DRIVE).
2. SET 2ND Boot Device Priority 2 to
USB (Your USB Device).
10. Windows Server 2008R2 Activation Setup9
Note: To Activate
1. Click Windows Loader
2. Click Begin Install
then wait until its finish…
11. Windows Server 2008R2 Activation Setup
Continue…….10
Observe Patience…
wait until its finish…
12. Windows Server 2008R2 Set Password setup for first
time to be used.11
Click Ok to continue and set
the Password
13. 2
1
Windows Server 2008R2 Setting Password for
Administrator12
Set password to
tvl.20
Click the
Arrow Button
Note: After click the arrow
Windows will prepare the desktop
items and it continue to initializing the
windows applets.
16. Installation of Windows Server 2008R2 is DONE!.
For those would like to install Windows Server
2008R2. You may repeat the steps again.
God luck! Installing……
Windows Server 2008R2.