Evidence for the construction of the table of contents page

1. Evidence Of Constructing TOC
(Table of Contents)
•Second Draft
•Final Draft

2. Second Draft
Firstly, I selected a background fill (grey)
and used the paint bucket tool and
clicked the blank page.

3. The first image is a picture that I took to run through
each page. The second image is the transformation
made when increased the . I increased the Brightness
to +27 because it illuminated the page more. Then, I
applied Black/White to enhance the brightness
evermore.

4. I incorporated the same text for the Contents Page. I used the Punk Kid font which I researched
online and found on a website called http://www.1001fonts.com/. I chose this font because it
really features the elements of punk rock. I added two effects; Inner Glow and Outer Glow.
I transmitted the font to the contents page and it appeared as shown
below.
I experimented with
different effects but I really
liked the appearance with
the Inner Glow and Outer
Glow because it made it
more alerting and drew a
real amount of attention.

5. Generating the Sub - Image
According to the grunge requirements, they undermine perfection so I used the snipping tool
and cut around the outline of the model, it gave me a messy obscure effect which really
enhanced the black white more.

6. After that, I selected the paint bucket tool and selected the black colour, then I drew out a
rectangular shape because this will be the area I will place the feature list.

7. This feature tab was produced on
PowerPoint, I achieved this by selecting
the shapes option and searching for the
block arrows features and I chose the
first one.
I had to rotate the arrow and
by transforming it to 18
degrees.
I formatted the shape by
changing to no fill, then
to a orange border also,
I changed the line style
so it would enhance the
arrow.

8. I created the arrow using publisher, I chose
the Block Arrow option and selected the
first option (red box). Then, once drew
out the arrow I right clicked and I
formatted the arrow because I wanted to
enhance the appearance.
Here, I wanted to include a page
number with a banner that was
outlandish. By achieving this I
chose the 12 star feature. I the
formatted shape with a different
line style because it drew more
attention to the design. I
changed the page number (3) to
a different colour (Gold).

9. I decided to include rectangular
boxes which will separate the
content pages. I did this by
selecting the rectangle tool and
mapped out where I wanted it
to go.
I produced these banners on publisher. I formatted the shape
and selected yellow for the line colour. After that, so I right
clicked the shape and clicked ‘Edit Text’. I typed the page
numbers with using the font stencil with a font size of
The contents listed differ with text, hues of grey and sizes. For ‘Upcoming
Events’ is used the font Stencil and set the size to 34 then, for ‘Pearl Jam
Concert Page 3’ I used Stencil again with the same font size but the font
colour is light grey. For, ‘Reviews’ I set the font at Stencil with the same
font size but a darker grey and for the Interview page it’s the same not
including the font colour which is a darker grey. However, the last content
listing- below GIG GUIDE the text is different to the rest of the content. The
font setting for that listing is Century Gothic with a font size of 18.

10. Final Draft

11. Setting the Background
Again, I set the
background with
a grey fill. This
grey fill is the
border that is
Again, the changes of
the background. The
effects is used to achieve
the punk vibe.

12. Generating The Font I didn't alter the font because I liked the
consistency of the feature; how the colours are bold and make a
statement and the yellow represents a warning sign
Before
After

13. Here, I inserted a black box because I wanted to enhance the text when
entered. I searched the left tool bar and I selected the Gradient tool bar.

14. Here, I had to inserted a quote from a famous Nirvana track (Lithium). “I got a bomb in my temple that is
going to explode”. I carefully achieved this by zooming in the text and I separated the black font with the
white font.
I also set the text at Italics
because it was easier for me to
distinguish what letter stops at
the given colour.

15. By producing this convention I had to select a
shape and I chose a ‘Rounded Rectangle’
after, I right clicked the shape selected format
Shape then, I chose to a yellow colour for a
solid fill then I wanted to incorporate text so I
right clicked the shape and clicked ‘Edit Text’.
‘LITHIUM! DELIVERED TO YOUR DOOR FOR
JUST £2 PER MONTH!’ is all in capital letters
and underlined.
This font was originally horizontal but I tilted it to
give it an edgy appeal. The font I used was Stencil
and I set the font size at 54.
Get!

16. This is a very significant element to the
magazine which I forgot to add to the second
draft. I created this by clicking on the text
option and then clicked on where I wanted to
place is and types the issue number which
consists a white fill with the font size at 34
and the font is Franklin Gothic type.
Here, I added a black filled thin box by
click on the Rectangle tool and drew out
where I wanted it ( below the title page
and above the plug). I used the
transformation tool to adjust the box
because I wanted the length and height
to be perfect.
I added a thin yellow rectangular box
which appears below the features
listings and above the quote. As
mentioned already I selected the
rectangle tool and mapped out where I
wanted it to go.

17. This is the end result of my Table Of
Contents.