Evidence of step by step constructing of DPS

1. Evidence of Construction of
DPS (Double Page Spread)
•Second Draft
•Final Draft

2. In the requirements it stated that the DPS had to
be A3, so in order to do this I had to create a new
page and alter the size which was originally A4 to
A3.
Next, I had to format the page to Landscape
because a standard page for landscape is rotated
at 90 degrees.
Second Draft

3. The first image is a picture that I took to run through
each page. The second image is the transformation
made when I altered it using Brightness/Contrast. I
increased the Brightness to +27 because it
illuminated the page more. Then, I applied
Hue/Saturation to enhance the brightness
evermore.

4. Here, I took this images and edited by
using Hue and Saturation I increased the
Hue to +56 which resulted in giving a
reddish tone I transformed the image by
rotating to the left. Same with the
second image below.

5. I added a headline stating ‘IT’S A RIOT’. The font I
chose is called ‘Punk kid’ which cause curiosity on
the viewers because they both match really well
together.

6. I created the banner using Microsoft Publisher. I was
able to convert it to Photoshop and incorporate text.
The font is Stencil and the size is differentiated with
different words. I did this because it would create
more emphasis and a sense of paranoia considering
the element of an element.

7. I inserted text to fill the content with background
information. I changed the font because I didn’t want
Stencil because it would look to compact and squashed but
mainly hard to read.

8. Final Draft

9. I took this image in my photo shoot and
applied to the DPS background.

10. For the background setting I formatted
the background to the image I
captured.
Then, I chose the Brightness/Contrast
effect. I increased the brightness to
+127 and the contrast to +26

11. Here, is the final transition of the background setting. I incorporated Hue/Saturation
and set the Hue at +6 and Lightness at +48 but the Saturation at -45, I did this because I
didn’t want to condense the page seeing as it was the DPS and it had to be efficient to
read.

12. I chose this image because I
like the background and it
applied to the specific trend
for grunge; rough and urban.
I edited the image on
Photoshop and used the
colour balance tool which
enabled me to increase the
‘Cyan’ option to +100 and
the Magenta to +17 which
gives the image that
burgundy tone and the
yellow to +12

13. Now, I chose the Hue/Saturation tool
to give a rusty effect and increased the
Hue to +2 and increased the Saturation
to +76 which composites the red out
even more even in the lighter areas.
After that, I chose the Brightness and
Contrast tool and decreased the
brightness to -83 and increased the
Contrast to +100, which makes the
image a darker red in various areas

14. I transformed the image by clicking ‘Ctrl T’ I transformed
the image to the left so it looked like a poster as if it
actually was stuck on the brick wall. Then, I got the same
image and duplicated it so there's two afterwards I tilt
the image to the left and then resized it bigger.
I resized the image because I planned to add text to
the second image so in order to have the text big
and bold the second image had to be bold.

15. I transformed the image and tilt it to the left
and I ad t bring the layer forward because it
was hidden behind the layer below. Then, I
filled the font with the colour white because it
would engage the readers more and reinforce
the word ‘RIOT!’

16. I also transformed ‘RIOT’ because I wanted to
show continuity and consistency. They both
share the same font other than the size. The
‘RIOT’ heading is 200 pt, I wanted differences
in font because it the word riot connotes big
features.
I made the text white
again because I wanted
to show continuity
throughout the
headline.

17. I
Here, I had to edit the image so I can transform and then rotate it round so
it can fit well. I had to minimize the image because it was really big before,
however the I couldn't use the magic wand to edit out the fingers because
t would ruin the whole appearance of the guitar.

18. Here, I transferred the image to the DPS by
dragging it to the specific place I wanted it.
Similar to the top, I dragged the
feature to the exact place I want it. I
made sure the text was not
intercepting the main headline
because it would ruin the appearance
of the format .
Again, I dragged the image to the place I
wanted it but I had to be careful because it
was hidden so I had to shift the layer
upwards after the headline layer.

19. When inserted the text I want to give
the text a black and white pattern. I did
this because it gave an effect that really
was eccentric and unconventional which
channels from the origins of Grunge. I
had to be very careful so I zoomed in to
make sure every word was in exact
place for either colours.

20. Here, I inserted the
’EXCLUSIVE’, I used
Stencil as my font
because I wanted
to keep a consistent
theme running
through, as I
incorporated it in
my front cover and
table of contents
I then added a black box which will have the
word ‘EXCLUSIVE’. I had to use the box tool
to position where I wanted to space the Box,
I didn't have to fill the box because before I
clicked the fill button and chose Black.

21. The DPS text was next contributed and I used the Bell Gothic Std font because it was standard
and it gave a professional uncluttered appearance which suited well with the scheme of the
DPS. I chose size 20 because I wanted the text to be readable but also have the page filled with
a reasonable amount of background information.

22. I made this arrow on publisher and it consists a yellow fill
and a golden border. I made three to reflect a striking
feature. Constructing three of the arrows requires
consistency because they all had to be tilted on an angle
but appear in a straight line.
I imported an Image I took form a concert and
places it on the black footer. I did this to expand
the content more so the image could evoke more
of a perspective on the audience.