1. Faster Way To pour
Soda
By:Bryson Knapik
4/24/15
Science Project
2. •Problem:When you pour
sodas or drinks for a party it
is to slow.
•Solution:I invented a
machine that you can pour 4
drinks at once.
Question
3. Why I Chose This
• Why I chose this project was that
I wanted to do something fun.I
also wanted to solve a problem
and Just do someting random and
have people be suprised about
my random idea.
4. What I Enjoyed
• What I enjoyed most
about making the
project was building
the stand for it to sit
on.Also getting to
drink what ever I put
in the bottle to test
it.
5. Procedures
• What I did was got the 4 way T
and some little tube and
fittings.Then built the stand and
screwed the device onto the pipe
stand.Then I tested the pop pottle
and used a drink to see if it
worked and didn't leak.
6. Problems encountered
• Problems encountered was that
the groves of the bottle and hose
they both had different
grooves.That it would leak from
where you would screw the hose
part on.Then we got a brass
adapter that screwed on perfect
and then I glued it on.
7. Results
•I do not have any results
with pictures but the
design did work not the
first time it took a couple
of tests to make it work.
8. What I Learned
• What I learned was that you can't
get something right the first time.It
will usually take a little time and
you need to have patience.Do not
start you project close to last
minute it is not smart.
9. Things I would so differently
•What I would do
differently is think over
my project more then do
it.Let the glue dry more
before trying to test it
out.
10. Most difficult thing
• Most difficult thing was
finding the right fitting to
make it so that it wouldn't
leak.
Also making the stand for it
to sit on.