3. A Revolution of Rock Breaking
□ Vibration Ripper is one of the excavator attachments.
□ Its excellent performance is from high frequency vibration.
□ The breaking strength of vibration is produced by actuation
of two eccentric wheels with a pair of meshing gears rotating
Synchronously in opposite directions by a hydraulic motor.
□ It leads even surrounding material's cracks.
□ Economical alternative for ‘Drilling & Blasting’
□ The most excellent feature is it is faster than
traditional hydraulic breaker - around 3 to 5 times
and it has minimum noise under 50-70db.
□ No expansive tools like moil point, chisels etc,
but only a replaceable tooth.
□ Requires no greasing, no replacement of Bushes,
Seals or any other parts.
□ Protects the Excavators.
4. Compare Vibration Ripper and Breaker
Vibration Hydraulic Breaker
Ripper Excavation
Principle Using a high frequency Impact energy of the sticking
(3,000rpm) vibration piston
There are no vibration, noise & Low initial investment.
Strength scatter during the excavation.
Effective in secondary breaking
application.
There is no need for secondary
crushing process.
Environmental Minimize the vibration and It’s make noise continuously
Impact noise. and scatter
Tunnel section, Road extension It’s cannot apply it to a large
Application Popular enmity section scale site in the town area.
Security neighbouring section
Working
Capacity / day 300 ~ 500m3 120 ~ 180m3
Cost / US dollar
5.
6.
7. Pramoted by;
OM INTERNATIONAL
# 141/6, Durga Bhavan, @nd Floor, RP Road
SECUNDERABAD (INDIA)
□ Phone: 040 6620 7756 □ Email: ominterna onalin@gmail.com