I Norton Clippers CDM-sortiment ingår två modeller: CDM163 som har en motoreffekt på 1.800 W och är avsedd för våtborrning med borrkronor med en diameter på upp till 160 mm, och CDM203 med en motor på 2.000 W som kan användas för både torr- och våtborrning med borrkronor upp till 200 mm diameter. Den senare är särskilt lämplig för håltagning i armerad betong.

1. handheld
drilling motors
CDM163 & cdm203
ABRASIVE SOLUTIONS 2014
reliable - comfortable
durable - user-friendly
2YEAR
WARRANTY

2. key features & benefits
The new Norton Clipper CDM
handheld drilling motors display
outstanding performance, reliability,
durability and are particularly user-
friendly.
DURABILITY, RELIABILITY AND MAINTENANCE
• Electronic & mechanical protections
The dual electronic and mechanical clutch, as well as the thermal protection, preserve
the user’s safety at all times and prevent the CDM drilling motor from overheating.
• Full aluminum body
The full aluminum body enhance heat dissipation and prevents overheating.
• Differential switch
Each Norton Clipper drilling motor is fitted with a ‘PRCD’ differential switch to prevent
electric risks.
• Easy maintenance
Easily replace the electric motor brushes with the direct access trapdoor.
COMFORTABLE & USER-FRIENDLY
• Powerful
With 1800 and 2000W respectively, CDM163 and CDM203 bring all the power needed to
quickly finish a drill, even in reinforced concrete.
• Soft-Start
Fitted with an electronic current limiter for softer starts, to relieve the user and reduce
electric load. The maximum speed is reached two seconds after the start.
• Ergonomics & Comfort
Ergonomic soft bi-material handles designed for use with heavy-duty gloves. Large rear
handle with shoulder pressure pad for a better grip and control. Weight balance and
internal components have been designed to reduce hand-arm vibrations.
• Transport suitcase
Each Norton Clipper CDM drilling motor is delivered in a heavy-duty transport suitcase.
CDM163 CDM203
Combined spindle
3-speed gearbox
Easy access to brushes
Water inlet
& dust extraction
Soft bi-material handles
Ø15-160mm Ø15-200mm
1.8kW 2.0kW
DIAmond corebits drill rigs & accessories
The X3 diamond drill uses a unique configuration
of bond and diamond specification in a revolu-
tionary new dual fluted/tapered segment, for
extreme performance : easy drill-start, 20% faster drilling
speed than standard corebits, better product life with 12mm
segment height.
• Outer diameters : Ø48 to 250mm.
• Useful length : 450mm.
• Connection : 1 ¼” UNC female thread.
• Application : concrete and reinforced concrete.
Core drill with brazed segments. Good value for
money.
• Outer diameters : Ø51 to 355mm.
• Suitable for concrete and masonry walls.
• Useful length : 450mm.
• Connection : 1 ¼” UNC female thread.
• Application : concrete and reinforced concrete, masonry.
Core drills with laser welded segments for wet
drilling. The special tapered-shape segments
allow for an easier start of the drill.
• Outer diameters : Ø14 to 600mm.
• Useful length : 300mm up to Ø50, 450mm from Ø52.
• Connection : ½” male up to Ø52, 1 ¼” UNC female from Ø52.
• Application : concrete and reinforced concrete, masonry.
Light-weight laser-welded corebit for handheld
wet-drilling applications. 10mm high extra-thin
tapered-top segments for very fast drilling and
quick start.
• Outer diameters : Ø111 to 355mm.
• Useful length : 300mm.
• Connection : ½’’male.
• Application : concrete and reinforced concrete,
brick walls, masonry walls.
Norton Clipper offers a wide range of professional dry-
and wet-drilling corebits.
x3 dynamic
classic beton classic
pro cb beton pro
pro cb beton xt pro
Performance
Good Better Best
Dynamic
Pro
Classic
Features Benefits
• Aluminum column.
• Robust, reliable while light
weight.
• Left and right mounting
drive-lever.
• Easy use even in confined
environments.
• Multi-purpose drive-lever.
• Can be used for levelling and
locking screws.
• Spirit level. • For accurate column levelling.
• Wheel-guided carriage.
• High accurary drill guiding,
less maintenance.
• Laser pointer (CDR162). • For precise rig positioning.
• Ring mounting motor collar
(60mm).
• Quick and easy motor
mounting without any
additional tool.
• Transport handle on top. • Easy and ergonomic handling.
• Adjustable bit guide
(CDR162).
• Precise cutting of the bit.
CDR 162CDR 132
Fully aluminum drill stand combining rigidity, precision,
ease of use and light weight. Unique accurate and
smooth guiding thanks to 4 guiding rolls made of high
performancy Nylon. Easily accessible guiding wheels with
wear compensation adjustment.
Spirit level.
Adjustable bit guide (CDR162).
Vacuum pump VP 135. Drilling centering device.
Left and right mounting drive lever.
Laser pointer system.
Each Norton Clipper drilling motor benefits from an additional 12-month
warranty, to reach a total of 2-year warranty from the date of purchase.
2YEAR
WARRANTY

3. www.construction.norton.eu
Saint-Gobain Abrasives S.A.
190 Bd J.F. Kennedy
L-4930 Bascharage
Luxembourg
Tel: +352 50401 1
Fax: +352 50163 3
sales.nlx@saint-gobain.com
safety
first!
core drilling techniques
Drilling can be made with handheld or fixed equipment.
Handheld drilling has the advantage to require less preparation and is a faster operation, but
is recommended for drilling diameters up to 100mm only. Handheld motors safety clutch are
designed to protect the end-user against hand-arm injuries and are thus fitted
to much less torques than for a fixed drilling operation.
Fixed drilling requires more preparation work to fasten properly the equip-
ment, but then allows much larger drilling diameters with non-limited torques.
modEls CDM163 CDM203
Article number 701846 47807 701846 47808
Code EAN 13 5450248 571568 5450248 571575
technical data
Volts 230 Volts 230 Volts
Power 1800 Watts 2000 Watts
RPM under load 525 / 1150 / 2400 450 / 1050 / 2000
Max. wet drilling with rig 130mm 200mm
Max. dry drilling handheld 100mm 100mm
Connection R½ + 1”¼ R½ + 1”¼
Collar diameter Ø60mm Ø60mm
Weight 8,1kg 8,2kg
Differential switch
230 V 16 A – 10 mA
Saint-Gobain Abrasifs
European Headquarters
Rue de l’Ambassadeur - B.P.8
78 702 Conflans Cedex
France
Tel: +33 (0)1 34 90 40 00
Fax: +33 (0)1 39 19 89 56
Saint-Gobain Abrasives GMBH
Birkenstraße 45-49
D-50389 Wesseling
Germany
Tel: +49 (0) 2236 703-1
Fax: +49 (0) 2236 703-367
Suitcase content - CDM163 or CDM203
1x handheld drilling motor with differential switch
1x water-hose
1x dust extraction connector (CDM203 only)
1x 22mm spanner
(corebits)
1x 32mm spanner
(motor spindle)
1x 60mm collar handle
1x User manual
1x Spare parts list
technical data
130
Masonry
Concrete
15
15 160
Masonry
Concrete
100
15 160
CDM203
CDM203
CDM163
CDM163
Corebit diameter (mm)
Materialhardness
15 200
Norton is a registered trademark of Saint-Gobain Abrasives.
EN60745-1