2. What is Laser Screed Technology ?
Laser Screed Technology is a ride on machine
that establishes grade by laser, disperses concrete by
auger, vibrates and consolidates the concrete.
It is the new technique for the placement of concrete.
3. How Laser Screed Works ?
• The Laser Screed is a ride on machine with a laser guided
screed at the end of a 20 ft (6 m) long telescopic boom.
• An on-board computer monitors the floor profile by laser
and adjust the screed level 5 times per second.
• The self -levelling vibratory screed consolidates the
concrete, which is dispersed by an auger.
• With a laser screed , a single crew can consistently place and
finish 15000 to 20000 sq.ft of concrete floor per day.
4.
5.
6. Laser Screed Specification :
• Overall width
• Overall length
• Overall height
• Boom Reach
• Screed width
5’ to 8’ Outside of Tires
9’ to 14’ at Screed Head
12’ to18’ Boom In
23’ to 36’ Boom Out
19’ to 28’ Transport
6’ to 8’
12’ to 20’
8’ to 12’
7. • Screed Area per pass
• Fuel capacity
• Upper frame rotation
• Vehicle Stabilization
• Operating modes
• Maximum Speed
• Engine Type
• Horse Power
96 sq.ft to 240 sq.ft
18 to 27 gallons
200 or 360 degrees
4 hydraulically operated stabilizer
pads
2 wheel , 4 wheel, Crab steer
up to 4.4 mph
4 cylinder ,4-stroke diesel Engine
30 HP @ 3000 rpm Or
65 HP @ 2600 rpm
8. Advantages :
• High quality, high output technique allows up to 20,000 Sq.ft
to be constructed in a single day.
• Labour requirement is less.
• Speedy Construction .
• Laser control ensures that a good standard of accuracy is
maintained throughout each pour.
• Construction is Faster, Flatter, and Fewer.
9. Dis-advantages :
• Cost is very high.
• Highly Skill supervision is needed during the construction.
• Not suitable for smaller areas.
• Laser screed is larger in size & weight so larger area is
needed for its use.
• Light reinforcement won’t stand up to the machine’s
weight.
10. Application :
• It is used in Industrial large floors.
• Large concrete pavement.
• Large parking floors.
• For larger building projects.