1. JEFFREY I. BALTAZAR
Santa Clara, CA 95051 | (408) 406-1474 | jeffbaltazar3@gmail.com
WORK EXPERIENCE
Applied Materials (through Aerotek) July 2015-Present
Engineering Technician
• Maintaining tools (Producer GT)
• Changing process kits and checking leaks with helium
• Troubleshooting equipment and helping other engineers if needed
• Keeping inventory of parts
Google (through Adecco agency) September 2014-May 2015
Meka Robotics (acquired by Google)
Assembler/Technician II
• Assembled robotic arms such as machined plates (shoulder, bicep, forearm, wrist), belt pulleys, idlers,
load cells sensor, bearings, dowel pins, PCB boards controller, 24vdc motors
• Kitted and issued parts
• Inspected parts per blue print assembly
• Reassembled and disassembled arms for trouble shoots and repairs
• Counted inventory control on parts
• Helped machinist to do rework parts and laser cut machines
• Trained other assemblers
Google (through Adecco agency) May 2013-September 2014
Equipment Technician
• Worked on Google Glass project
• Trained new technicians on process, equipment operations, calibrations, and maintenance
• Worked with the engineering team on both process and equipment improvements
• Troubleshot and repaired robotic equipment from component to system level
• Re-taught high precision robot coordinate system using robot pendants controller with 6-axis position.
• Performed LCOS (Liquid Crystal Optical System) and Final Optical Test (FOT) testing on optics modules
Medtronic Advanced Energy February 2007-November 2012
Sr. Production Lead
I supervised a line of assemblers working in an FDA-regulated environment to ensure that they met or exceeded
the monthly production plan of disposable electrosurgical device and related sub-assemblies. My primary
responsibilities included the following:
• Inspected, tested, and packaged finished goods.
• Worked with engineers on engineering projects including validations and qualifications
• Used small hand tools such as tweezers, cutters, ruler, calipers, microscopes, electrical test equipment,
glue dispensers, pneumatic and manual crimpers, spot welding equipment, tray and pouch sealers, tensile
tester, radiometer, UV Cure station, Hot Box, solder station to manufacture/assemble, inspect test and
package devices and related sub-assemblies
• Extensive familiarity with Lot History Records (LHRs), Manufacturing Process
Instructions (MPIs), Standard Operating Procedures (SOPs) and other GMP-related (Good Manufacturing
Practices) documentation
• Creation of work orders (WO) using QAD (resource planning software) and bill of materials (BOM)
using Agile (document management system/software) and MS Excel 2010

2. Siemens Medical Solutions May 1999-February 2007
Production Technician
• Built catheter bodies utilizing braided shaft material, Pebax tubing, Vectran fiber, serpentine circuitry
and transducers.
• Performed the assembly with the use of hot air box (fusing) and worked under the microscope
• Built mechanical control functionality using injection molded and machined components and
cyanoacrylate adhesives
• Checked the circuit with the use of multi-meter for shortages
• Tested the product assembly with the XDCR test, PreCable test, PostCable test and Hipot test
• Assisted Engineering projects when required
• Disassembled, reassembled, and troubleshot probes as required
• Attended classes such as Environmental Health Safety, Material Hazard Safety and Emergency
Evacuation Safety
• Communicated ideas for process improvement
• Reported any problems or concerns to the manufacturing lead, Supervisor, or responsible Engineer
• Trained other manufacturing personnel on operations or functions that you are certified to perform
• Accurately filled out required production records.
OTHER KNOWLEDGE, SKILLS, & ABILITIES
• Mechanical aptitude
• Manual dexterity
• Organizational skills and work habits that demonstrate attention to detail
• Ability to work well with others in a team environment
• Utilizing demand flow manufacturing technologies.