PROFIL SDN 08 CURUP TIMUR
•Download as PPT, PDF•
1 like•4,989 views
Dokumen tersebut merupakan profil Sekolah Dasar Negeri 08 Curup Timur yang mencakup visi, misi, tujuan, prestasi, fasilitas, data siswa, profil kepala sekolah dan guru beserta foto-foto sekolah.
Recommended
More Related Content
What's hot
What's hot (20)
Similar to PROFIL SDN 08 CURUP TIMUR
Similar to PROFIL SDN 08 CURUP TIMUR (20)
Recently uploaded
Recently uploaded (20)
PROFIL SDN 08 CURUP TIMUR
- 1. Click to edit Master text styles ◦ Second level ◦ Third level PEMERINTAH KABUPATEN Fourth level REJANG LEBONG Fifth level DINAS PENDIDIKAN KABUPATEN REJANG LEBONG Jln.S.Sukowati,Cur up,Kabup aten Rejang lebong
- 2. Dengan Bangga Kami Persembahkan Profile Sekolah Dasar Negeri 08 Curup Timur
- 3. Peta Wilayah kelurahan Talang Ulu Kecamatan Curup Timur Kabupaten Rejang Lebong.Propinsi Bengkulu
- 4. Click to edit Master text styles ◦ Second level ◦ Third level Fourth level Fifth level Selamat Datang di Profile Sekolah Dasar Negeri 08 Curup Timur Dikabupaten Rejang Lebong Propinsi Bengkulu
- 5. PEMERINTAH KABUPATEN REJANG LEBONG DINAS PENDIDIKAN KABUPATEN REJANG LEBONG Jln.S.Sukowati,Cur up,Kabupaten Rejang lebong SUHERMAN,SE.MM BUPATI KAB REJANG LEBONG
- 6. PEMERINTAH KABUPATEN REJANG LEBONG DINAS PENDIDIKAN KABUPATEN REJANG LEBONG Jln.S.Sukowati,Cur up,Kabupaten Rejang lebong
- 7. PEMERINTAH KABUPATEN REJANG LEBONG DINAS PENDIDIKAN KABUPATEN REJANG LEBONG Jln.S.Sukowati,Cur up,Kabupaten Rejang lebong SYAFEWI AR,S.Pd.MM KADIKNAS KAB REJANG LEBONG
- 8. PEMERINTAH KABUPATEN REJANG LEBONG DINAS PENDIDIKAN KABUPATEN REJANG LEBONG Jln.S.Sukowati,Cur up,Kabupaten Rejang lebong YUSRIWATI,S.Pd.MM Kepsek SDN 08 CURUPTIMUR
- 9. PEMERINTAH KABUPATEN REJANG LEBONG DINAS PENDIDIKAN KABUPATEN REJANG LEBONG Jln.S.Sukowati,Cur up,Kabupaten Rejang lebong
- 10. Selamat Datang DiProfile Sekolah Dasar Ne geri 08 Cur up Timur kabupaten Rejang Lebong.Prop.Bengkulu Jln smkn 1.kel,talang Ulu ,Kec cur up timur e-@mail : yusriwatibenul@yahoo.co.id http// : sd08cur uptimur.blogspot.com
- 11. VISI DAN MISI SD NEGERI 08 CURUP TIMUR VISI .MENJADIKAN SEKOLAH TERPECAYA DIMASYARAKAT UNTUK MENCERDASKAN BANGSA,DALAM MENSUKSESKAN WAJIB BELAJAR MISI 1.MENYIAPKAN GENERASI UNGGUL YANG MEMILIKI POTENSI DI BIDANG IMTAQ DAN IPTEK. 2.MEMBENTUK SUMBER DAYA MANUSIA YANG AKTIF ,KREATIF,INOVATIF,SESUAI DENGAN PERKEMBANGAN ZAMAN 3.MEMBANGUN CITRA SEKOLAH SEBAGAI MITRA TERPERCAYA DIMASYARAKAT
- 12. TUJUAN SEKOLAH 1.SISWA BERIMAN DAN BERTAQWA KEPADA TUHAN YANG MAHA ESA DAN BERAKHLAQ MULIA 2.SISWA SEHAT JASMANI DAN ROHANI 3.SISWA MEMILIKI DASAR DASAR PENGETAHUAN,KEMAMPUAN DAN KETERAMPILAN UNTUK MELANJUTKAN JENJANG PENDIDIKAN PADA JENJANG YANG LEBIH YANG TINGGI 4.MENGENAL DAN MENCINTAI BANGSA,MASYARAKAT DAN KEBUDAYAANNYA 5.SISWA KREATIF,TERAMPIL DAN BERKARYA UNTUK DAPAT MENGEMBANGKAN SECARA TERUS MENERUS
- 13. Selayang Pandang Allhamdulillah Dengan Rahmat Allah S.W.T akhirnya kami bisa juga menginformasikan tentang sekolah kami yang tercinta dan tak lupa kami kirim salam kepada jujungan nabi kita Muhammad SAW yang bisa membuat kita kejalan kebaikan.Sekolah Dasar negeri 08 curup timur,adalah sekolah yang bertempat di kelurahan talang ulu, kecamatan curup timur,kabupaten Rejang Lebong,sekolah ini dahulunya bernama sekolah dasar negeri 68 curup,
- 14. Pada tahun 2009 sesuai perkembangan kecamatan akhirnya sekolah ini menjadi sd negeri 08 curup timur. Menurut sejarah sekolah ini berdiri pada tahun 1968,sekolah ini mempunyai tempat yang sangat strategis dan dengan nuansa alami,dan berudara yang sejuk,serta sekolah yang termasuk kategori sekolah sehat di kecamatan curup timur
- 15. Para Pemerintah ,tokoh masyarakat dan warga pada khususnya dikecamatan curup timur tersebut bekerja sama dengan sekolah dalam hal untuk memajukan sekolah dari segala aspek terutama dalam,keagamaan,pendidikan,dan kesehatan dan sebagainya
- 16. -Prestasi Sekolah Dasar Negeri 08 Curup Timur tingkat kecamatan,kabupaten,dan Propinsi .
- 17. Pr estasi SDN 08 Cur up Timur. .Juara 1 putri Karate se Propinsi Bengkulu 2010 -Juara azan dan pengajian se kecamatan curup timur tahun baru islam -Juara 3 sains 02sn sekecamatan curup timur -Sekolah sehat terbaik sekecamatan curup timur 2012 -Juara umum O2SN Sekecamatan curuptimur 2011 -Juara 1 dan 2 putriPerlombaan Renang Bupati Cup Rejang Lebong 2011 -juara 2 putra Perlombaan Renang Bupati Cup Rejang lebong 2011 -juara catur 1 putra dan putri O2sn curup timur2011 -10 besar Storr y Telling pidato bahasa inggris HARDIKNAS sekabupaten Rejang lebong 2008 -JUARA SEKOLAH SEHAT KE 3 sekabupaten Rejang Lebong -Juara lari 1 putra Bupati cup Rejang Lebong 2011 -Juara 2 sepak bola putra o2sn sekecamatan cururp timur 2011 http//:Sd08cur uptimur.blogspot.
- 18. Kekurangan Sekolah Perlu Perhatian Per lu diketahui dengan bentuk kesederhanaan,bahwa sekolah ini banyak membutuhkan fasilitas yang belum dibangun seper ti, -Ruang gur u -Ruang UKS -Ruang WC -Ruang Kelas ( yang masih kur ang hing ga 2 kelas) Namun tidak menutup kemungkinan kami tetap menfaatkan fasilitas per umahan Gur u yang telah Rusak Demikin mohon Perhatian Semua Pihak
- 19. SD Ne geri 08 Cur upTimur mempunyai sarana dan Prasarana sekolah ber upa Fasilitas SD Ne geri 08 Cur upTimur fasilitas diantaranya :
- 20. Fasilitas SD ne geri 08 Cur up timur Catatan : fasilitas tidak memiliki Ruang Sendiri tetapi memanfaatkan gedung yang telah r usak dan tidak memadai Musholla (Ruang Shalat) Perpustakaan Ruang UKS (usaha kesehatan sekolah) Lapangan Bola Volly Lapangan Bulu Tangkis Papan Tenis Meja Ruangan Permainan Catur Ruang Olahraga taman sekolah dan Apotik hidup http//:sd08cur uptimur.blogspot.c
- 21. Ekstrakulikuler Pramuka Sepak bola Catur Badminton
- 22. DATA MURID SD NEGERI 08 CURUP TIMUR TAHUN AJARAN 2012-2013 ; Kelas I = LAKI-LAKI :17 PEREMPUAN :19 Kelas II = LAKI-LAKI :19 PEREMPUAN :11 Kelas III = LAKI-LAKI :25 PEREMPUAN :18 Kelas IV = LAKI-LAKI :11 PEREMPUAN :18 Kelas V = LAKI-LAKI :23 PEREMPUAN :18 Kelas VI = LAKI-LAKI : 16 PEREMPUAN :15 TOTAL SISWA: 210 SISWA http//:sd08cur uptimur.blogspot.c
- 23. Nama Kepala Sekolah yang Pernah Menjabat di SD Negeri 08 Curup Timur Sudiarti,S.Pd Khairaniah,A.Ma.pd Nurbaiti,S.Pd Yusriwati,S.Pd, Sri Maryani,S.Pd Yusriwati,S.Pd.MM http//:sd08cur uptimur.blogspot.c om
- 24. PROFIL KEPALA SEKOLAH SERTA DEWAN GURU DAN STAFF,PENJAGA SEKOLAH SD Negeri 08 curup timur untuk meningkatkan mutu ,baik secara profesional dan kompetensi,bahwa sebagian dewan guru,telah memiliki guru yang bersertifikasi dan juga sebagian masih tahap proses sertifikasi. Dalam hal Kualifikasi pendidikan guru SD negeri 08 curup timur,menurut persentase 85 % pendidikan S1 dan 1 orang S2 dan Guru lainya 15 % Proses menuju ke pendidikan S1 PROFIL KEPALA SEKOLAH SERTA DEWAN GURU DAN STAFF,PENJAGA SEKOLAH
- 25. Profil Kepala Sekolah Sd Negeri 08 Curup Timur Nama : Yusriwati ,S.Pd.MM TTL : Lebong Selatan,26-11-1963 Alamat : Gg kemuning Rt 09 kel sukaraja kecamatan curup timur E-@mail : yusriwatibenul@yahoo.co.id No hp : 085267046366 Pendidikan : S1 Pendidikan Geografi Universitas Prof Dr hazairin Bengkulu. S2 Manajemen Pendidikan STIMA IMMI Jakarta Jabatan :-kepala sekolah SDN 08 Curuptimur ( 2006-2010) -Guru biasa di SDN 04 binduriang Kec Padang Ulak tanding (2011) -kembali Tugas menjadi kepala sekolah SDN 08 Curup timur yang ke 2 kali pada tahun (2012 hingga sekarang) Kompetensi : Guru Sertifikasi 2008
- 26. Nama : Syahyar diana,Ama,Pd TTL :Curup,25-12-1957 Alamat : Desa air meles bawah,kec curup timur Jabatan : Bendahara BOS Pendidikan : Diploma 2 Kompetensi : Guru Sertifikasi 2010 No hp : Nama : Darwin,Ama,Pd TTL : Kota donok lebong 09-11- 1960 Alamat : rt 09 rw 3 No 1,jln kemuning sukaraja ,kec curup timur Jabatan : Guru Penjasorkes Pendidikan : Diploma 2 Penjasorkes Bengkulu Kompetensi : Guru Sertifikasi 2011 No hp : 082175998554
- 27. Nama :Velli Erdelina,Ama.Pd TTL : Curup,16-12-1960 Alamat : kelurahan,kep siring,curup Jabatan : Guru kelas Pendidikan : Diploma 2( Proses S1) Kompetensi : Proses Guru Sertifikasi No hp : 085368271633 Nama : Yusnil Yana,S.Pd TTL :Curup,12-07-1964 Jabatan :Guru Kelas dan Kep Perpustakaan Pendidikan : S1 Universitas Muhammadiyah Bengkulu Kompetensi :Proses guruSertifikasi No hp :08117309925
- 28. Nama : Sapuan,A.ma TTL : Kelilik,kepahiang,08- 10- 1957 Alamat : Sukaraja,gg dahlia.curup timur Jabatan : Wakil Kepala Sekolah Pendidikan : Diploma 2 Kompetensi : Guru Sertifikasi 2012 No hp :081271785579 Nama : Sri Hartati,S.Pd TTL :Curup,17-03-1966 Alamat : kelurahan talang ulu,curup timur Jabatan : Guru Kelas Pendidikan : S1 Universitas prof Dr hazairin Bengkulu Kompetensi :Proses Guru Sertifikasi No hp : 085279029550
- 29. Nama : Harmayati,A.ma TTL : Curup,17-10-1966 Alamat : kelurahan,talang ulu,curup timur Jabatan : Guru Agama Pendidikan : Diploma 2(Proses S1) Kompetensi : Proses Guru Sertifikasi No hp :085268893671 Nama : Sabaryati,S.Pd TTL :Curup,06-03-1971 Alamat : kelurahan air meles atas,curup tengah Jabatan : Guru Kelas Pendidikan : S1 Universitas Terbuka Bengkulu Kompetensi : Guru Sertifikasi No hp : 082334961697
- 30. Nama : Ida Haryanis,S.Pd TTL : Kerinci,jambi, 06-02- 1970 Alamat : Kelurahan talang ulu,kecamatan curup timur Jabatan : Guru Kelas Pendidikan : S1 Universitas Prof Dr Hazairin,Bengkulu Kompetensi : Guru Sertifikasi 2012 No hp : 085268690400 Nama : Anni Satujannah,A.Ma TTL :Bengkulu,01-10-1985 Alamat : kelurahan talang ulu,kec Curup Timur Jabatan : Guru Kelas Pendidikan : D2 Universitas Bengkulu,(Proses S1) Kompetensi : Proses Guru Sertifikasi No HP : 085267971108
- 31. Nama : Tri Wijayanti,S.Pd TTL : Sragen,25-03-1985 Alamat : Kelurahan Sambe Baru,kec curup timur Jabatan : Guru Kelas Pendidikan : S1Universitas Muhammadiyah Bengkulu Kompetensi : Proses Guru Sertifikasi No hp : Nama : Hardian Firdaus,S.PdI TTL : Curup,28-05-1977 Alamat : Jln Baru no 927,curup Jabatan : Guru Bahasa Inggris Pendidikan : S1 Bahasa Inggris STAIN Curup Kompetensi : Proses Guru Sertifikasi No hp : 082175493995
- 32. Nama : Widia Puspita TTL : Curup ,21-04-1989 Alamat : Gg kemuning Rt 09 kel sukaraja kec. curup timur Jabatan : Guru Mulok Pendidikan : Proses S1 Pendidikan Kompetensi : Proses Guru Sertifikasi No HP :085377219515 Nama : Wita Mulyasusanti,S.Pdi TTL : Curup,03-08-1989 Alamat : kelurahan talang ulu,kec.curup timur Jabatan : Staff TU dan Tenaga Tekhnis Perpustakaan Pendidikan : S1 PGMI STAIN Curup Kompetensi : No hp :08973358878
- 33. Nama : Imam Buchori TTL : Malang,19-05-1979 Alamat : Komplek sdn 08 curuptimur Jabatan : Penjaga Sekolah Pendidikan : SMA Kompetensi : No Hp : 081333019969 Nama : Maharani TTL : Cawang baru,25-09- 1994 Alamat : Kel.Cawang Baru Pendidikan : Proses S1 STAIN Curup Jabatan :Pelatih Kepramukaan Kompetensi : No HP : 08982228412
- 34. TERIMAH KASIH ANDA TELAH MENYAKSIKAN PROFILE SEKOLAH DASAR NEGERI 08 CURUP TIMUR Yang beralamatkan Sekolah Dasar Ne geri 08 Cur up Timur kabupaten Rejang Lebong.Pr op.Bengkulu Jln smkn 1.kel,talang Ulu ,Kec cur up timur Untuk informasi lebih lengkap silahkan mengakses situs resmi sd negeri 08 curup timur
- 35. Anda bisa mengakses melalui dunia internet alamat web sekolah kami dengan alamat http// : sd08curuptimur.blogspot.com Atau anda bisa mengirim surat e-@mail elektronik ke alamat sekolah kami dengan alamat : e-@mail : yusriwatibenul@yahoo.co.id
- 36. Kami Segenap Keluarga Besar SD Negeri 08 Curup Timur mengucapkan Terimah Kasih Atas Dukungannya dalam terciptanya Profile SD Negeri 08 Curup Timur diantaranya ; Bupati Tingkat II Kab Rejang Lebong Kepala Dinas Pendidikan Kab Rejang Lebong Kabiddikdas Dinas Pendidikan Kab Rejang Lebong Kepala UPTD Dinas Pendidikan Kab Rejang Lebong Kepala Pengawas Sekolah Dasar Sekecamatan Curup Timur Dinas Kecamatan Curup Timur Dinas Kelurahan dan Perangkat kel Talang Ulu Puskesmas Kecamatan CurupTimur Komite SD Negeri 08 Curup Timur Tokoh Agama sertamasyarakat,Cerdik Pandai dan Wali murid yang kami cintai serta warga talang ulu pada khususnya yang kami hormati http//:sd08cur uptimur.blogspot.c
Editor's Notes
- Custom animation effects: Grayscale picture fades to full color (Basic) To reproduce the grayscale picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab , in the Illustrations group, click Picture . In the Insert Picture dialog box, select a color picture and then click Insert . On the slide, select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.15” and the Width box is set to 6.25” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Under Picture Tools , on the Format tab, in the Adjust group, click Recolor , and then under Color Modes click Grayscale (first option from the left). Right-click the grayscale picture, and then click Format Picture . In the Format Picture dialog box, in the left pane, click Shadow . In the Shadow pane, click the button next to Presets , and then under Outer click Offset Diagonal Top Right (third row, first option on the left). On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . To reproduce the full-color picture effects on this slide, do the following: Select the grayscale picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Select the duplicate picture. Under Picture Tools , on the Format tab, in the Adjust group, click Recolor , and then under No Recolor click No Recolor . On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Middle . Click Align Center . To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Custom Animation . On the slide, select the full-color picture, and then do the following in the Custom Animation task pane: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Slow. Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Expand , and then click OK . Under Modify: Expand , in the Start list, select With Previous . Under Modify: Expand , in the Speed list, select Fast . To reproduce the background effects on this slide, do the following: On the Design tab, in the Background group, click Background Styles , and then click Style 8 (second row, fourth option from the left). ( Note : If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)
- Custom animation effects: picture triptych, slide 1, left picture to front center (Intermediate) Tip: For the effects on this slide, use pictures with a “portrait” (vertical) orientation. You will need to use drawing guides to reproduce the effects in this slide. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 2.35” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 8 pt . Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Perspective , click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Picture dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format tab: Under Bevel , click the button next to Top , and then under Bevel click Relaxed Inset (first row, second option from the left). Next to Top , in the Width box, enter 8 pt , and in the Height box, enter 6 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). In the Depth box, enter 12 pt . Under Surface , click the button next to Material , and then under Standard click Warm Matte (second option from the left). On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the right on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the left on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the picture on the left side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Right (third row, third option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.8” and the Width box is set to 2.53” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Left (third row, second option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.17” and the Width box is set to 2.78” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the left side of the slide. On the Home tab, in the Clipboard group, click Paste , and then click Duplicate . Select the duplicate picture. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate , do the following: In the Height box, enter 5.83” . In the Width box, enter 3.89” . Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects , point to 3-D Rotation , and then click No Rotation . To reproduce the animation effects on this slide, do the following: Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen . ( Note: One horizontal and one vertical guide will display on the slide at 0.00.) On the Animations tab, in the Animations group, click Custom Animation . Select the picture on the left side of the slide, and then in the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , do the following: In the Start list, select With Previous . In the Size list, in the Custom box, enter 133% , and then press ENTER. In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Right . Under Modify: Right , do the following: In the Start list, select With Previous . In the Speed list, select Fast . On the slide, select the right motion path. Point to the endpoint (red arrow) of the selected right motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide. Select the picture on the left side of the slide. In the Custom Animation task pane, click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Right . Under Modify: Right , do the following: In the Start list, select With Previous . In the Speed list, select Medium . Also in the Custom Animation task pane, select the fifth animation effect (second right motion path). On the slide, point to the endpoint (red arrow) of the selected right motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide, into the same position as the endpoint of the first right motion path. On the slide, point to the starting point (green arrow) of the selected second motion path until the cursor becomes a two-headed arrow. On the slide, drag the starting point to the same position as the starting point for the first right motion path. Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , clear Display drawing guides on screen , and then click OK . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until four stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 24% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , and Blue: 107 . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 35% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , Blue: 107 . Select Stop 4 from the list, and then do the following: In the Stop position box, enter 90% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).
- Custom animation effects: picture triptych, slide 2, picture returns to left (Intermediate) Tip : For the effects on this slide, use pictures with a “portrait” (vertical) orientation. For best results, use this slide in combination with the previous slide in this PowerPoint template. You will need to use drawing guides to reproduce the effects in this slide. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 2.35” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 8 pt . Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Perspective , click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Picture dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format tab: Under Bevel , click the button next to Top , and then under Bevel click Relaxed Inset (first row, second option from the left). Next to Top , in the Width box, enter 8 pt , and in the Height box, enter 6 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). In the Depth box, enter 12 pt . Under Surface , click the button next to Material , and then under Standard click Warm Matte (second option from the left). On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the right on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the left on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the picture on the left side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Right (third row, third option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.8” and the Width box is set to 2.53” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Left (third row, second option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.17” and the Width box is set to 2.78” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the left side of the slide. On the Home tab, in the Clipboard group, click Paste , and then click Duplicate . Select the duplicate picture. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate , do the following: In the Height box, enter 5.83” . In the Width box, enter 3.89” . Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects , point to 3-D Rotation , and then click No Rotation . To reproduce the animation effects on this slide, do the following: Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen . ( Note: One horizontal and one vertical guide will display on the slide at 0.00.) On the Animations tab, in the Animations group, click Custom Animation . Select the picture on the left side of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Motion Paths , and then click Right . Under Modify: Right , in the Start list, select With Previous . Under Modify: Right , in the Speed list, select Fast . On the slide, select the right motion path. Point to the endpoint (red arrow) of the selected right motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide. On the slide, right-click the motion path, and then click Reverse Path Direction . Select the picture on the left side of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , In the Start list, select With Previous . Under Modify: Fade , In the Speed list, select Fast . Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Left . Under Modify: Left , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Also in the Custom Animation task pane, select the fourth animation effect (second right motion path). On the slide, point to the endpoint (red arrow) of the selected right motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide, into the same position as the endpoint of the first right motion path. On the slide, drag the endpoint (red arrow) of the second motion path to the same position as the endpoint (red arrow) for the first motion path. Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , in the Start list, select With Previous . Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 70% , and then press ENTER. Under Modify: Grow/Shrink , in the Speed list, select Fast . Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , clear Display drawing guides on screen , and then click OK . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until four stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 24% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , and Blue: 107 . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 35% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , Blue: 107 . Select Stop 4 from the list, and then do the following: In the Stop position box, enter 90% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).
- Custom animation effects: picture triptych, slide 3, center picture grow and return (Intermediate) Tip : For the effects on this slide, use pictures with a “portrait” (vertical) orientation. For best results, use this slide in combination with the previous slide in this PowerPoint template. You will need to use drawing guides to reproduce the effects in this slide. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 2.35” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 8 pt . Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Perspective , click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Picture dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format tab: Under Bevel , click the button next to Top , and then under Bevel click Relaxed Inset (first row, second option from the left). Next to Top , in the Width box, enter 8 pt , and in the Height box, enter 6 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). In the Depth box, enter 12 pt . Under Surface , click the button next to Material , and then under Standard click Warm Matte (second option from the left). On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the right on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the left on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the picture on the left side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Right (third row, third option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.8” and the Width box is set to 2.53” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Left (third row, second option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.17” and the Width box is set to 2.78” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture in the middle of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Picture dialog box, in the left pane, click Shadow . In the Shadow pane, click the button next to Presets , and then under No Shadow click No Shadow . Select the picture in the middle of the slide. On the Home tab, in the Clipboard group, click Paste , and then click Duplicate . Select the duplicate picture. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate , do the following: In the Height box, enter 5.83” . In the Width box, enter 3.91” . Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects , point to 3-D Rotation , and then click No Rotation . To reproduce the animation effects on this slide, do the following: Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen . ( Note: One horizontal and one vertical guide will display on the slide at 0.00.) On the Home tab, in the Editing group, click Select , and then click Selection Pane . On the Animations tab, in the Animations group, click Custom Animation . In the Selection and Visibility pane, select the original small picture behind the large duplicate picture in the center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , in the Start list, select With Previous . Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 165% , and then press ENTER. Under Modify: Grow/Shrink , in the Speed list, select Fast . Also in the Custom Animation task pane, click the arrow to the right of the animation effect (grow/shrink effect), and then click Effect Options . In the Grow/Shrink dialog box, on the Effect tab, under Settings , select Auto-reverse , and then click OK . Also in the Custom Animation task pane, do the following: Click Add Effect , point to Motion Paths , and then click Down . Under Modify: Down , in the Start list, select With Previous . Under Modify: Down , in the Speed list, select Fast . Also in the Custom Animation task pane, under Modify: Down, click the arrow to the right of the second animation effect (down motion path), and then click Effect Options . In the Down dialog box, on the Effect tab, under Settings , select Auto-reverse , and then click OK . On the slide, select the down motion path. Point to the endpoint (red arrow) of the selected down motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide. Select the large duplicate picture in the front center of the slide. I n the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Appear , and then click OK . Under Modify: Appear , in the Start list, select With Previous . Also in the Custom Animation task pane, click the arrow to the right of the third animation effect (appear effect), and then click Timing . In the Appear dialog box, on the Timing tab, in the Delay box, enter 1 , and then click OK . In the Selection and Visibility pane, select the original small picture behind the large duplicate picture in the center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Basic , click Disappear , and then click OK . Under Modify: Disappear , in the Start list, select With Previous . Also in the Custom Animation task pane, click the arrow to the right of the fourth animation effect (disappear effect), and then click Timing . In the Appear dialog box, on the Timing tab, in the Delay box, enter 1 , and then click OK . Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , do the following: In the Start list, select On Click . In the Size list, in the Custom box, enter 60% , and then press ENTER. In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Up . Under Modify: Up , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Also in the Custom Animation task pane, select the sixth animation effect (up motion path). On the slide, point to the endpoint (red arrow) of the selected up motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the same position as the starting point (green arrow) for the down motion path. Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Basic , click Disappear , and then click OK . Under Modify: Disappear , in the Start list, select After Previous . In the Selection and Visibility pane, select the small original picture in the center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Basic , click Appear , and then click OK . Under Modify: Appear , in the Start list, select After Previous . Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, Guide setting, under Guide settings , clear Display drawing guides on screen , and then click OK . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until four stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 24% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , and Blue: 107 . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 35% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , Blue: 107 . Select Stop 4 from the list, and then do the following: In the Stop position box, enter 90% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).
- Custom animation effects: picture triptych, slide 4, right picture to front center (Intermediate) Tip : For the effects on this slide, use pictures with a “portrait” (vertical) orientation. For best results, use this slide in combination with the previous slide in this PowerPoint template. You will need to use drawing guides to reproduce the effects in this slide. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 2.35” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 8 pt . Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Perspective , click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Picture dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format tab: Under Bevel , click the button next to Top , and then under Bevel click Relaxed Inset (first row, second option from the left). Next to Top , in the Width box, enter 8 pt , and in the Height box, enter 6 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). In the Depth box, enter 12 pt . Under Surface , click the button next to Material , and then under Standard click Warm Matte (second option from the left). On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the right on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the left on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the picture on the left side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Right (third row, third option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.8” and the Width box is set to 2.53” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Left (third row, second option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.17” and the Width box is set to 2.78” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the Clipboard group, click Paste , and then click Duplicate . Select the duplicate picture. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate , do the following: In the Height box, enter 5.83” . In the Width box, enter 3.89” . Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects , point to 3-D Rotation , and then click No Rotation . To reproduce the animation effects on this slide, do the following: Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen . ( Note: One horizontal and one vertical guide will display on the slide at 0.00.) On the Animations tab, in the Animations group, click Custom Animation . Select the picture on the right side of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , do the following: In the Start list, select With Previous . In the Size list, in the Custom box, enter 133% , and then press ENTER. In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Left . Under Modify: Left , do the following: In the Start list, select With Previous . In the Speed list, select Fast . On the slide, select the Left motion path. Point to the endpoint (red arrow) of the selected motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide. Select the picture on the right side of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Left . Under Modify: Left , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Left . Under Modify: Left , do the following: In the Start list, select With Previous . In the Speed list, select Medium . Also in the Custom Animation task pane, select the fifth animation effect (second left motion path), and then do the following on the slide: Point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Drag the starting point to the same position as the starting point for the first motion path. Point to the endpoint (red arrow) of the selected motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the same position as the endpoint for the first motion path. Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , clear Display drawing guides on screen . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until four stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 24% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , and Blue: 107 . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 35% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , Blue: 107 . Select Stop 4 from the list, and then do the following: In the Stop position box, enter 90% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).
- Custom animation effects: picture triptych, slide 5, picture returns to right (Intermediate) Tip : For the effects on this slide, use pictures with a “portrait” (vertical) orientation. For best results, use this slide in combination with the previous slide in this PowerPoint template. You will need to use drawing guides to reproduce the effects in this slide. To reproduce the picture effects on this slide, do the following: On the Home tab, in the Slides group, click Layout , and then click Blank . On the Insert tab, in the Illustrations group, click Picture . In the Insert Picture dialog box, select a picture, and then click Insert . Select the picture. Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.5” and the Width box is set to 2.35” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. On the Home tab, in the Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click Line Color in the left pane. In the Line Color pane, select Solid line , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Picture dialog box, click Line Style in the left pane, and then in the Line Style pane, in the Width box, enter 8 pt . Also in the Format Picture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets , and then under Perspective , click Perspective Diagonal Upper Right (first row, second option from the left). Also in the Format Picture dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format tab: Under Bevel , click the button next to Top , and then under Bevel click Relaxed Inset (first row, second option from the left). Next to Top , in the Width box, enter 8 pt , and in the Height box, enter 6 pt . Under Depth , click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 25% (fourth row, second option from the left). In the Depth box, enter 12 pt . Under Surface , click the button next to Material , and then under Standard click Warm Matte (second option from the left). On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the right on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the first picture. On the Home tab, in the Clipboard group, click the arrow under Paste , and then click Duplicate . Drag the duplicate picture to the left on the slide. Right-click the duplicate picture, and click Change Picture . In the Insert Picture dialog box, select a picture and click Insert . Select the picture on the left side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Right (third row, third option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 3.8” and the Width box is set to 2.53” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the bottom right corner of the Drawing group, click the Format Picture dialog box launcher. In the Format Picture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, click the button next to Presets , and then under Perspective , click Perspective Heroic Extreme Left (third row, second option from the left). Under Picture Tools , on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate , the Height box is set to 4.17” and the Width box is set to 2.78” . Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left , Right , Top , and Bottom boxes. Select the picture on the right side of the slide. On the Home tab, in the Clipboard group, click Paste , and then click Duplicate . Select the duplicate picture. On the Home tab, Drawing group, click Arrange , point to Align , and then do the following: Click Align to Slide . Click Align Center . Click Align Middle . Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, under Size and rotate , do the following: In the Height box, enter 5.83” . In the Width box, enter 3.89” . Under Picture Tools, on the Format tab, in the Picture Styles group, click Picture Effects , point to 3-D Rotation , and then click No Rotation . To reproduce the animation effects on this slide, do the following: Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , select Display drawing guides on screen . ( Note: One horizontal and one vertical guide will display on the slide at 0.00.) On the Animations tab, in the Animations group, click Custom Animation . Select the picture on the right side of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Motion Paths , and then click Left . Under Modify: Left , in the Start list, select With Previous . Under Modify: Left , in the Speed list, select Fast . On the slide, select the right motion path. Point to the endpoint (red arrow) of the selected motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the intersection of the horizontal and vertical drawing guides at the center of the slide. Right-click the motion path and click Reverse Path Direction . Select the picture on the right side of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Entrance , and then click More Effects . In the Add Entrance Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , in the Start list, select With Previous . Under Modify: Fade , in the Speed list, select Fast . Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Exit , and then click More Effects . In the Add Exit Effect dialog box, under Subtle , click Fade , and then click OK . Under Modify: Fade , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Click Add Effect , point to Motion Paths , and then click Right . Under Modify: Right , do the following: In the Start list, select With Previous . In the Speed list, select Fast . Also in the Custom Animation task pane, select the fourth animation effect (right motion path). On the slide, point to the endpoint (red arrow) of the selected motion path until the cursor becomes a two-headed arrow. Drag the endpoint to the same position as the endpoint for the first motion path. Select the large duplicate picture in the front center of the slide. In the Custom Animation task pane, do the following: Click Add Effect , point to Emphasis , and then click More Effects . In the Add Emphasis Effect dialog box, under Basic , click Grow/Shrink , and then click OK . Under Modify: Grow/Shrink , in the Start list, select With Previous . Under Modify: Grow/Shrink , in the Size list, in the Custom box, enter 70% , and then press ENTER. Under Modify: Grow/Shrink , in the Speed list, select Fast . Right-click the slide background, and then click Grid and Guides . In the Grid and Guides dialog box, under Guide settings , clear Display drawing guides on screen . To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background . In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear . Click the button next to Direction , and then click Linear Down (first row, second option from the left). Under Gradient stops , click Add or Remove until four stops appear in the drop-down list. Also under Gradient stops , customize the gradient stops as follows: Select Stop 1 from the list, and then do the following: In the Stop position box, enter 0% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 24% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , and Blue: 107 . Select Stop 3 from the list, and then do the following: In the Stop position box, enter 35% . Click the button next to Color , click More Colors , and then in the Colors dialog box, on the Custom tab, enter values for Red: 125 , Green: 121 , Blue: 107 . Select Stop 4 from the list, and then do the following: In the Stop position box, enter 90% . Click the button next to Color , and then under Theme Colors click Black, Text 1, Lighter 5% (sixth row, second option from the left).
- ganti teks sesuai selera
- ganti teks sesuai selera
- ganti teks sesuai selera
- ganti teks sesuai selera
- ganti teks sesuai selera
- ganti teks sesuai selera