3. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
INDEX
All this information is available in www.edibon.com . Contact to Edibon engineers for doubts or request
2.1 QUALITY
2.2 TECHNOLOGY
2.3 TECHNOLOGICAL CONCEPT
CLARIFICATIONS
2.4 KEY FEATURES FOR IMPORTANT
UNITS OF OUR RANGE (EDIBON
UNIQUE)
5. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.1. Quality Definition
Nice looking
A nice looking
unit does not
necessarily
correspond to
high quality.
HIGH Quality when:
You control the
design.
You control the
manufacturing.
You do the
quality control.
Quality certificates:
ISO;
CE;
Others
7. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2.1.2. Quality Certificates
2.1.2 a) Main EDIBON quality certificates
2. KNOW HOW
All applicable to: Design, Manufacturing, Commercialization and After-Sales Service of Teaching Equipment:
* ISO 9001:2008
* UE Conformity Declaration
* ISO 14001:2004
9. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2.1.2. Quality Certificates
2.1.2 b) Other EDIBON quality certificates
2. KNOW HOW
* Worldidac Quality Charter Certificate.
* Worldidac member Certificate
*The Global Compact Joint Certificate
(including the Global Compact Ten Principles).
Under evaluation: UL for USA and CSA for Canada.
* “Chamber Trust” Trademark
11. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3. Incidences
2.1.3 a) Who generates the mistake
EDIBON
UNIT
SUPPLY
INCIDENC
E
DUE
TO
EDIBO
N
mistake
EDIBON
rep
mistake
Custome
r mistake
Transport
incidence
Error in
manual
Any
other
mistake
12. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3. Incidences
2.1.3 b) General procedure
EDIBON Unit
Problem
Send e-mail to
EDIBON
customersupport@edibon.co
m
EDIBON opens
a file
IMPORTANT: With any incidence, EDIBON has to be informed by e-mail, NOT by phone,
please!
13. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3. Incidences
2.1.3 b) General procedure
E-mailwth
Incidence
SIMPLE PROBLEM:
COMMERCIAL PROBLEM:
TECHNICAL PROBLEM:
COMPLEX PROBLEM:
IMPORTANT: With any incidence, EDIBON has to be informed by e-mail, NOT by phone,
please!
14. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3. Incidences
2.1.3 b) General procedure
E-mail
with
Incidence
SIMPLE PROBLEM: Incidence Dept. solves the
problem
IMPORTANT: With any incidence, EDIBON has to be informed by e-mail, NOT by phone,
please!
15. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3 Incidences
2.1.3 b) General procedure
E-mail
with
Incidence
COMMERCIAL PROBLEM: Incidence Dept. pass it to
the Commercial Dept. and the Commercial
Dept. solves the problem.
IMPORTANT: With any incidence, EDIBON has to be informed by e-mail, NOT by phone,
please!
16. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3. Incidences
2.1.3 b) General procedure
E-mail
with
Incidence
TECHNICAL PROBLEM: Incidence Dept. pass it to
the Quality Control Dept. and the Quality
Control Dept. solves the problem.
IMPORTANT: With any incidence, EDIBON has to be informed by e-mail, NOT by phone,
please!
17. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3. Incidences
2.1.3 b) General procedure
E-mail
with
Incidence
COMPLEX PROBLEM: Incidence Dept. passes to the
Technical Director and he solves the
problem with a team formed by Quality
Dept., Design Dept. and Manufacturing
Dept.
IMPORTANT: With any incidence, EDIBON has to be informed by e-mail, NOT by phone,
please!
18. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3 Incidences
2.1.3 c) Actions after problem has been solved
After problem has been solved, the Incidence Dept. pass information about the failure to the Technical Director and
he decides if ANY CORRECTION IS REQUIRED or NOT, by discussion with his team.
INCIDENCE
DEPT
TECHNICAL
DEPT
decides
CORRECTION
S if required
End
19. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.3 Incidences
2.1.3 d) How to close the incidence file
- Incidence Dept. asks the end customer IF
THE PROBLEM HAS BEEN SOLVED.
- The Incidence Dept. closes the file by:
* Confirmation the problem has been
solved
20. TechnicalTeachingEquipment
www.edibon.com
2.1. QUALITY
2. KNOW HOW
2.1.4 Guarantees
EDIBON offers with every unit supplied:
Company
structure and
future
About 50
engineers full-
time dedication
8 manuals
provided with any
unit
Sophisticated
and complete
quality control
Sustainability for
any unit supplied
Components
control during the
life-time of the unit
3 YEAR
GUARANTE
E
21. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.2 TECHNOLOGY
2.2.1 Technology: Design
2.2.2 Technology:
Quality Control for Manual Units
2.2.3 Technology: Quality Control
for Computer Controlled Units
2.2.4 Technology: Teaching Techniques
22. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.2 TECHNOLOGY
2.2.1 Technology: Design
2.2.1 a) Example of unit display
2.2.1 b) Top quality components
2.2.1 c) Precise drawing (Laser)
2.2.1 d) Nice looking units
2.2.1 e) Nice soft and diagrams
2.2.1 f) Intuitive allocation
2.2.1 g) Complete units design
2.2.1 h) Modular designs
2.2.1 i) Other designs
2.2.1 j) Sustainable design
2.2.1 k ) EDIBON unit serial number
2.2.1 l) Conclusions
24. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 b) Top quality components
Standard components available in any country.
In case any required component is not available in the market, EDIBON Engineers design and will manufacture
in door.
25. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 c) Precise drawing (laser)
All plates are CUT BY “LASER”
All the stainless steel plates, as rod materials are cut by LASER, so the drawing has to be very
precise and the components have to have the proper drawing, allowing quick and proper allocation
in the plates or the allocated device.
The LASER CUT SYSTEM has a very good looking and avoids injury to the students´ hands.
26. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 d) Nice units looking
All EDIBON units follow the same looking rule.
Units:
Grey anodised aluminium for the
structure.
The structure profiles are our own
EDIBON design.
Blue colour for all plates. Blue colour
embellisher.
Red covers.
Interfaces:
Box with the process diagram on
front.
27. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 e) Nice soft and diagrams
All EDIBON units follow the same looking rule.
Software:
Lab view structure.
New anagramas.
Diagrams:
Diagrams in front panel.
New company logo:
New company logo, manual, etc.
28. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 f) Intuitive Allocation
All EDIBON units have the easiest allocation for allowing the students to follow the circuits easily.
The diagrams we supplied have the same components allocation that the real unit has.
Similar diagrams for easy use are included in the manual.
29. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 g) Complete units design
EDIBON has a full time Engineering Team, that is regularly designing:
.
˃3.000 units ˃1.000
interface
Some key
components
˃ 2.000
packages
33. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 j) Sustainable design
.
Any EDIBON unit is divided into, from 4 to 12 different
groups, named “CJ”. Maximum 99.
Any group is divided into several subgroups, named
“SB”. Maximum 99.
Any subgroup is divided in components or single pieces,
named “P”. Maximum 99.
So, any component in any EDIBON unit has a code and it is
totally identified during the “complete life of any EDIBON
unit”.
34. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 k) EDIBON unit serial number
Any EDIBON unit has its own “serial number” and associated with the
serial number is the issue related with the unit. We keep all issues forever.
Example: UCP 001468/Issue 7. This is a UCP unit with series Nº 001468 and
manufactured under Issue Nº 7.
.
35. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.1 Technology: Design
2.2.1 l) Conclusions
By knowing a damaged component in any unit, we can identify it by
these six numbers, the component and proper drawing, so we can
recommend the replacement.
See 2.2.1 a) Example of unit display.
This system has been used by EDIBON since 2003 and is in
continuous improvement process.
.
38. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.2 TECHNOLOGY
2.2.3 Technology: Quality Control for Computer
Controlled Units
2.2.3 a) Manual control at Manufacturing place
2.2.3 b) Manual control at Quality Control Department
2.2.3 b) Complete unit control
2.2.3 c) Automatic control at Quality Control Department
39. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.3 Technology: Quality Control for Computer Controlled Units
2.2.3 a) Manual control at Manufacturing place
UNIT
Checks
Visual: 22
Leakage:
16
DAB
Checks
DAB
Installation : 8
DAB test: 9
Sensor: 12
INTERFAC
E
Checks
Electronics: 40
40. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.3 Technology: Quality Control for Computer Controlled Units
2.2.3 b) Manual control at Quality Control
Department
.
UNIT
Checks
Visual: 22
Leakage:
12
SOFTWARE
Checks
Running: 4
Verification: 7
Sensor: 5-300
INTERFAC
E
Checks
Visual: 5
Electronics: 6
42. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.3 Technology: Quality Control for Computer Controlled Units
2.2.3 d) Automatic control at Quality Control Department
.
This control is done automatically by using
the computer and with all parts running
including unit, interface, data acquisition
board and software.
When the automatic control is done, WE
KEEP A COPY IN A CD OF ALL THE
RESULTS, for future use for a record in
case of any troubles.
IMPORTANT!
We make corrections in the Teaching Manuals
whenever we make any change in the unit. All manuals
are in our Data Base.
To be on top technologically, means more mistakes and
risks, but even in these hard conditions, EDIBON tries to
minimise the mistakes risks in new designs and to make
zero mistakes with all existing units.
44. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques
2.2.4 a) All Teaching Techniques designed and used by
EDIBON
.
* Edibon patent TTeaching
level
H
E
TV S
- 3D= EDIBON Three Dimensions System.
Real Time Control, obtaining results in Three
Dimensions.
• •
- CAI= Computer Aided Instruction Software System.
The computer guides the student what to do and the
teacher controls the student work.
• •
- CAL= Computer Aided Learning Software (Results
Calculation and Analysis).
• •
- EDAS/VIS= EDIBON Data Acquisition System/Virtual
Instrumentation System.
• •
- MUAD= Electric Power Data Acquisition System. • •
- * RTC= EDIBON Real Time Control System.
Electronic Real Time Control for Advanced Electronics
and SCADA.
• • •
- * HYBRID= EDIBON Hybrid System (Energy).
It uses Real Units combined with Software, using
mathematical models.
• •
- * ARTIFICIAL Photoelasticity System (Strength of Materials). •
45. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques
2.2.4 a) All Teaching Techniques designed and used by
EDIBON
.
* Edibon patent TTeaching
level
H
E
TV S
- * SCADA/SCADA with
PID Control
EDIBON Computer Control System: Computer Control
+ Data Acquisition + Data Management.
Multicontrol + Real Time Control + Open Control.
• •
H
E
TV S
- * PLC= Industrial Control using PLC. • •
- * Mini ESN= EDIBON Mini-Scada-Net System.
30 students can work simultaneously doing Real Time
Computer Control.
• • •
- * ESN= EDIBON Scada-Net System (Management Control
from a local NET).
30 students can work simultaneously doing Real Time
Computer Control.
• •
- * ETDL= EDIBON Technical Distance Learning System.
The Scada-Net System can be controlled through
Internet at any distance.
• •
- FSS= Faults Simulation System. •
46. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.2 TECHNOLOGY
2.2.4 Technology: Teaching Techniques
2.2.4 b) Teaching Techniques application
3D Third Dimension
CAI Computer Aided
Instruction Software System
CAL Computer Aided
Learning (Results Calculation and
Analysis)
EDAS/VIS Data Acquisition + Virtual
Instrumentation System
RTC EDIBON Real Time Control
System
EDIBON Hybrid System (Energy)
ARTIFICIAL VISION Photoelasticity
System (Strength of Materials).
SCADA EDIBON Computer
Control System
PLC Industrial Control using
PLC
EDIBON Mini-Scada-Net
System
ESN EDIBON Scada-Net
System
ETDL EDIBON Technical
Distance Learning System
FSS Faults Simulation
System.
48. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques
2.2.4 b) Teaching Techniques application
* CAI Computer Aided Instruction Software System
.
Used for: -Basic Electronics and Kits
-Basic Communications
-Basic Electricity
-Electrical Machines
-Basic Mechanics
-Basic Fluid Mechanics
-… and any EDIBON Advanced Unit when is used for basic level
49. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques
2.2.4 b) Teaching Techniques application
* CAL Computer Aided Learning (Results Calculation and Analysis)
.
Used for: -Basic Electronics and Kits
-Basic Communications
-Basic Electricity
-Electrical Machines
-Basic Mechanics
-Basic Fluid Mechanics
-… and any EDIBON Advanced Unit.
Check case by case
50. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* EDAS/VIS Data Acquisition + Virtual Instrumentation System
.
Used for: -Basic Electronics and Kits
-EDAS/VIS 250.000 d/s for:
-Basic Electronics and Kits
EDAS/VIS 1.250.000 d/s for:
-Basic Communication
-Communication
MUAD/VIS 250.000 d/s for:
-Electrical Installations
-Domestic Electricity
-Electrical Machines
-Power Systems
-Smart Grid
51. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* RTC EDIBON Real Time Control System
.
Used for: -Advanced Electronics.
-All units using SCADA.
52. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* EDIBON Hybrid System (Energy).
.
Used for: -APS12. Power Plant Simulator
-Asg Series. Smart Grid.
53. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* ARTIFICIAL VISION Photoelasticity System (Strength of Materials).
.
Used for: -EFOV Photoelasticity
54. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* SCADA EDIBON Computer Control System: Computer Control +
Data Acquisition + Data Management.
.
Used for: -Advanced Electronics
-Advanced Communications
-Advanced Electricity
-Advanced Energy
-Mechanics
-Automation and Systems
-Fluid Mechanics
- Heat Transfer
- Process Control
-Chemical Engineering
-Food Technology
-Environment
55. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* PLC Industrial Control using PLC.
.
Used for: -Advanced Electronics
-Advanced Communications
-Advanced Electricity
-Advanced Energy
-Mechanics
-Automation and Systems
-Fluid Mechanics
- Heat Transfer
- Process Control
-Chemical Engineering
-Food Technology
-Environment
56. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* EDIBON Mini-Scada-Net System.
.
Used for: -Advanced Electronics
-Advanced Communications
-Advanced Electricity
-Advanced Energy
-Mechanics
-Automation and Systems
-Fluid Mechanics
- Heat Transfer
- Process Control
-Chemical Engineering
-Food Technology
-Environment
57. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* ESN EDIBON Scada-Net System (Management Control from a local NET).
.
Used for: -Advanced Electronics
-Advanced Communications
-Advanced Electricity
-Advanced Energy
-Mechanics
-Automation and Systems
-Fluid Mechanics
- Heat Transfer
- Process Control
-Chemical Engineering
-Food Technology
-Environment
58. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* ETDL EDIBON Technical Distance Learning System.
.
Used for: -Advanced Electronics
-Advanced Communications
-Advanced Electricity
-Advanced Energy
-Mechanics
-Automation and Systems
-Fluid Mechanics
- Heat Transfer
- Process Control
-Chemical Engineering
-Food Technology
-Environment
MADRID
NEW
YORK
59. TechnicalTeachingEquipment
www.edibon.com
2.2. TECHNOLOGY
2. KNOW HOW
2.2.4 Technology: Teaching Techniques used by EDIBON
2.2.4 b) Teaching Techniques application
* FSS Faults Simulation System (PID).
.
Used for: -Advanced Electronics
-Advanced Communications
-Advanced Electricity
-Advanced Energy
-Mechanics
-Automation and Systems
-Fluid Mechanics
- Heat Transfer
- Process Control
-Chemical Engineering
-Food Technology
-Environment
61. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.1 General concepts
2.3.1 a) SCADA
2.3.1 b) EDIBON SCADA features
2.3.1 c) EDIBON SCADA competition
2.3.1 d) PID Control
2.3.1 e) EDIBON Computer controlled units references
63. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.1 General concepts
2.3.1 b) EDIBON SCADA features
D
ACQUISITION
REPORT
A
S
C
A
CONTROL
AND
SUPERVISION
DATA
SUPERVISION
ALARMS
MONITORING + DATA SAVING + PLOTTING
MONITORING
MONITORING + DATA SAVING «DATA LOGGING»
OPEN «LOOP» CONTROL
CLOSE «LOOP» CONTROL
ON/OFF
PID
64. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.1 General concepts
2.3.1 c) EDIBON SCADA competition
D
ACQUISITION
REPORT
A
S
C
A
CONTROL
AND
DATA
SUPERVISION
ALARMS
MONITORING + DATA SAVING +
PLOTTING
MONITORING
MONITORING + DATA SAVING «DATA
LOGGING»
OPEN «LOOP» CONTROL
CLOSE «LOOP» CONTROL
ON/OFF
PID
SUPERVISION
SOME COMPANIES
FEW COMPANIES
ONLY SPECIAL CASES
Competition:
ONLY EDIBON
ONLY EDIBON
Competition:
Competition:
66. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.1 General concepts
2.3.1 d) EDIBON Computer controlled units references
EDIBON has designed and produces more than 200 different Computer Controlled units.
ALL EDIBON COMPUTER CONTROLLED UNITS USE “C”, AS THE LAST LETTER IN THE
REFERENCE.
Example:
TAAC: Air Conditioning Unit.
PBOC: Pumps Test Set.
UDCC: Distillation Column.
The last “C” means “Computer Controlled”.
What mean the other letters?
“T” at the beginning, in many cases related with the area. In case of “T” it is for “Thermodynamics”.
The other letters in the middle use to be in many cases, the first letters of the unit name but some
items in Spanish and in most cases in English.
67. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.2 a) Data Acquisition (Monitoring)
2.3.2 b) Data Acquisition (Monitoring + Data saving)
“Data Logging”
2.3.2 c) Data Acquisition (Monitoring + Data saving + Plotting)
2.3.2 d) Data Acquisition by SAMPLE PER SECOND
2.3.2 e) Which one does EDIBON use?
68. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.2 a) Data Acquisition (Monitoring)
Example: Temperature measurement
(Thermocouple)
SIGNAL
CONDITIONING
Data Monitoring
SIGNAL
PROCESSING
Process
Data
Values
SCADA
69. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.2 b) Data Acquisition (Monitoring + Data saving)
“Data Logging”
Example: Temperature measurement
Data Saving
(Thermocouple)
SIGNAL
CONDITIONIN
G
Data Monitoring
SIGNAL
PROCESSING
Process
Data
Values
SCADA
70. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.2 c) Data Acquisition (Monitoring + Data saving
+ Plotting)
Example: Temperature measurement
Data Plotting
(Thermocouple)
SIGNAL
CONDITIONIN
G
Data Monitoring
Process
Data
Values
SIGNAL
PROCESSING
Data Saving
SCADA
71. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.2 d) Data Acquisition by SAMPLE PER SECOND
About 100 D/S
About 1000 D/S
About 250.000 D/S
About 1.250.000 D/S
…More than 1.250.000 D/S
72. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.2 e) Which one does EDIBON use?
The most advanced ones:
Data Acquisition (Monitoring + Data
Saving + Plotting)
250.000 Data per second
and
1.250.000 Data per second
73. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.3 Control
2.3.3 a) Open Control Loop
2.3.3 b) Closed Control Loop. ON/OFF
2.3.3 c) Closed Control Loop. PID
2.3.3 d) Supervision. SCADA
2.3.3 e) Which one does EDIBON use?
74. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.3 Data Acquisition
2.3.3 a) Open Control Loop
Example: Temperature control
Set Point Control
Data Acquisition
(Thermocouple)
(Heater)
Process
Data
Values
SCADA
75. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.3 Data Acquisition
2.3.3 b) Closed Control Loop. ON/OFF
SCADA
Example: Temperature control
Set Point
Control
Data Acquisition
(Thermocouple)
(Heater)
Process
Data
Values
76. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.3 Data Acquisition
2.3.3 c) Closed Control Loop. PID
SCADA
Example: Temperature control
PIDSet Point
Control
(Thermocouple)
(Heater)
Data Acquisition
Process
Data
Values
77. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.3 Data Acquisition
2.3.3 d) Supervision. SCADA
Alarms
SCADA
Set Point
Data Acquisition
Control
Supervision
Alarms
(Thermocouple)
(Heater)
Process
Data
Values
Example: Temperature control
78. TechnicalTeachingEquipment
www.edibon.com
2. KNOW HOW
2.3 TECHNOLOGICAL CONCEPTS CLARIFICATIONS
2.3.2 Data Acquisition
2.3.3 e) Which one does EDIBON use?
EDIBON uses:
SCADA AND PID Control
In some cases only SCADA is required.
In some cases only ON/OFF is required.
80. TechnicalTeachingEquipment
www.edibon.com
2.4 KEY FEATURES FOR IMPORTANT UNITS OF OUR RANGE (EDIBON
UNIQUE)
2.4.1 Key features for units with SCADA and PID Control
2. KNOW HOW
For further information please click on the button beside
81. TechnicalTeachingEquipment
www.edibon.com
2.4 KEY FEATURES FOR IMPORTANT UNITS OF OUR RANGE (EDIBON
UNIQUE)
2.4.1 Key features for units with SCADA and PID Control
2. KNOW HOW
For further information please click on “play button” above