BIM Advantages And Disadvantages In Malaysia

BIM Advantages And Disadvantages In Malaysia
4.3.5 BIM Benefits to Developer
Table 4.4:
Respondent/Company Quotes
R1/A "BIM can reduce time consuming errors and rework, accessible from virtually anywhere at
any time by all projects stockholders and actionable to help informed you decision making with
simulation and analysis by means better communication flow. It can improve the accuracy of a
design. So, in other words, it can improve the visualisation. It can track and monitor the progress."
R2/B "By using BIM, of course is improve the design and a project can be easily monitored and
tracking the progress schedule. It could also maximise the resources while minimising errors. It can
be used to countercheck whether the building is designed according to standards."
R3/C "BIM gives us ... Show more content on Helpwriting.net ...
There are many more benefits of BIM, which have yet to be identified by Malaysian developers.
4.3.6 Usage Rate of BIM among Developers in Malaysia
BIM had been introduced in Malaysia since 2007. There are many pioneer projects undertaken to
show the benefit of using BIM. Table 4.12 shows the respondent's opinion on the usage rate of BIM
among developers in Malaysia.
Table 4.12:
Respondent Quotes
R1 "The numbers of projects using BIM in Malaysia is really very low. However the awareness of
BIM is growing."
R2 "Our company is one of the pioneer, and in Malaysia, the usage rate of BIM is low. Many do not
understand on what BIM actually is."
R3 "The usage of BIM is still very low. Even when some companies said that they uses BIM, but in
reality, they are not using BIM."
All three respondents agreed that the usage of BIM in Malaysian Construction Industry is low. This
is because the understanding of BIM in developers are still low. Many companies only defined BIM
as a 3D model. Their concept of BIM only stops at the design stage. Even though, CIDB had made
many initiatives to promote BIM, developers are still reluctant to implement
... Get more on HelpWriting.net ...

Advantages And Disadvantages Of Autocad
3.AUTOCAD:
AutoCAD is a special software application for 2D and 3D design (CAD) and also drafting available
since 1982 as a desktop application version and since 2010 use as a mobile web and also as a cloud
based app marketed as AutoCAD 360.
It was developed and marketed by Autodesk Inc. AutoCAD version was first released in December
1982, that running on microcomputers with internal graphics card controllers. So prior to the
introduction of AutoCAD, most of the commercial CAD programs also ran on mainframe computers
or minicomputers with each of the CAD operator also working at a separate graphics terminal.
AutoCAD is also used across a wide range of different industries, so by architects, by project
managers, through engineers, graphic designers, and also other professionals. It is also supported by
750 training center across worldwide as of 1994. ... Show more content on Helpwriting.net ...
Also in Russian, Czech, Polish, Hungarian will be widely available later on. The extent of
localization changes from full translation of the product to documentation . The AutoCAD command
set is also localized as a part of the softwares localization.
Extensions:
AutoCAD also supports a large number of APIs for the customization and automation. These are
include Auto LISP, a Visual LISP, a VBA, Dot NET and also Object ARX. Object ARX is a special
C++ class library, which was the base for: (a) products that extending AutoCAD functionality to
specific fields (b) creating products such as a AutoCAD Architecture, also AutoCAD Electrical and
AutoCAD Civil 3D
(c) third–party AutoCAD based different application. These are also a large number of AutoCAD
Plug–in add–on on different applications are available on the application store such as Autodesk
Exchange Apps .
Vertical

Statement Of Purpose In Environmental Engineering
"Our history begins before we are born. We represent the hereditary influences of our race and our
ancestors virtually live in us" – James Nasmyth (Engineer, Inventor)
My vehement desire to be an engineer was obvious – I was born in a family of engineers. My great
grandfather, Hazura S Birdi was the 1st Indian electrical engineer in America. Thereafter, my
grandfather was a machinist and my father is a civil engineer; Perhaps, my fascination towards
science and technology is hereditary. Following their footsteps, I decided to become an engineer.
Since childhood, I had a keen interest in technology. My eagerness to grasp new concepts and topics
has been a noteworthy characteristic about me and it helped to broaden my horizons greatly. When I
was just in 7th grade, I used AUTOCAD to make the model of a house, in ... Show more content on
Helpwriting.net ...
Many of them were quite interesting, but Environmental Engineering particularly captured my
interest. The module was taught by the head of my department – Sandeep Singla, who himself has
done Master's in environmental engineering. He was my torch–bearer and under his tutelage, I
became aware of the significance of this subject. Environmental engineering is basically the blend
of engineering and science principles to refine the natural environment which is the immediate need
of modern world. With the advancement of industries and technology, the pollution is on the incline.
Ergo, I decided to choose environment as a major, owing to my desire to contribute something
beautiful to the world. Not only this, but the enormous scope and its extensive application potential
also fascinated me. The craving to learn more about the subject persuaded me to take elective course
in 'Advanced Environment engineering'. 'A' grade in Environmental education in both the semesters
of my 12th class, demonstrate my interest for the

Shenmue
They build 2D and 3D games. They also render or generate graphics on the screen. Lastly, they add
physics and collision detection, so it can interpret how objects interact.
2. Why did the 1990's adventure game Grim Fandango experience poor sales despite its innovative
setting, great story, interesting puzzles, and overall critical and fan acclaim? What about the Sega
Dreamcast game Shenmue led to it being considered a flop?
The point and click games had diminished when it was released, and the market sales were poor.
The game Shenmue was too expensive, and the company went bankrupt and they shut down because
they could not make their money back.
3. What is the main idea behind designer Jesse Schell's three–step process for making a game?
The main idea is for people to think of ideas and try them out until they work out. It's like practice
you need to practice until you get good at something.
4. What are the ... Show more content on Helpwriting.net ...
Why are there no Mario games on Sony's PlayStation machines?
Marion was originally presented to Nintendo platform and they have all the rights belonging to the
game. If PlayStation was to make a Mario game they would get sued.
2. In terms of in–house custom engines versus third–party engines (like Unity), what has changed
today from decades ago, and why?
Decades ago people built their own custom engines for their games and now instead of creating
engines people use pre–made game engines which are third–house engines. It's better to use third–
house engines because they are specifically made for certain games for example Quake engines is
mostly used for first person shooter games
3. What is the "yes, and..." approach to improvisation, and why is it useful in brainstorming?
4. Think of a game you are familiar with and identify at least three team responsibilities which were
required to make the game, one each from designer, programmer, and artist roles. Cite specific
details in the game that you think required a particular

Proposal For Revit Training During San Antonio Essay
To: Alan Dostert, CEO From: Tom Dvorak, Structural CAD Technician Date: August 18, 2015 to
August 21, 2015 RE: Proposal for Revit Training in San Antonio, TX Introduction I am requesting
authorization to send two drafters from the Structural Department in Fargo, ND to Revit Training in
San Antonio, TX in August with all expenses paid. This training will help them get a good
understand of Revit that we are now using in our fast growing industry. The drafters will in turn
have the knowledge to train our fellow employees making our company more efficient and effective.
Problem Problem started when the company quite using AutoCAD and went to Revit in the summer
of 2015. Employee's lack experience in Revit No experience in 3D renderings Objectives The
objective is to get the proper training in Revit and to relay the basic information to fellow team
members. This training will also help train upcoming team members that lack experience in Revit.
In the end, it will save the company money since training can then be accomplished by the two
attendees. Solution The solution is to get the proper training in using Revit and creating under
budget construction documents throughout the company. It would allow the future and current team
members to have a great deal of training when they start a new project for the client. Method The
first method is to teach other drafters and upper management how the program operates. It will also
allow them to coordinate with other

Engineering Progression
Engineering and Robotics is my career and technical area. Throughout my four years of high school,
I have learned about the engineering design process, automated manufacturing, digital electronics,
and robotic systems. I plan to further develop the skills I have gained in my career and technical
area as I pursue a bachelor of science degree in Computer Engineering.
I believe my vocational experience will be invaluable to me as I continue along my career path.
Recently, I shadowed a student pursuing electrical engineering at my first choice college. In her
Introduction to Binary class, I realized I understood and had learned about the multiplexers the
professor was discussing. When I talked to the student I was shadowing, we realized I already

Summary: Vantage Technology Consulting Group
Vantage Technology Consulting Group provides strategic technology consulting such as business
continuity, disaster recovery planning, financial analysis, and organizational development. Vantage
Technology Consulting Group designs data networks, security systems, and much more. They work
across the United States, and internationally with nationally recognized clients in healthcare,
corporate, and commercial sectors. Vantage Technology is a successful company searching for a
Revit specialist to join their office in Los Angeles, California. Revit is unique to drafting, and this
job offer from Vantage Technology Consulting Group is a great option to explore and research.
Revit's building design software changes how buildings and utilities are

Senior Project Essay: The Four Choices
Senior Project essay
Of the four available choices for a senior project, I chose self–development. I wanted to challenge
myself and see how well I could plan and complete a time–consuming project. In order to achieve
this goal, I delved into 3dmodeling and design. After getting comfortable with 3dmodeling I decided
to create a chess board. I enjoy playing chess equally as much as I love working with computers.
This project was a married combination of my two favorite things. I was inspired to pursue
3dmodelling from many of the past (and recent) engineering classes I had taken. In the past, I took
Basic Drafting and Intro to Engineering where a large majority of our assignments involves
manufacturing an object using a 3dmodelling software ... Show more content on Helpwriting.net ...
This machines ranged from the table saw, to the orbital sander and the laser engraver. After I
completed my chess board I decided that it was time to find a mentor. I felt the best candidate for
my mentor was Ephraim Nikoi (an associate professor of Creative arts at University of Wisconsin–
Superior). I chose Ephraim as my mentor because my project involved the creation of a product and
the selling and marketing of said product. Ephraim had completed many years of studying creative
arts and communication art. "Communication arts focuses on the many ways that people
communicate with each other. This includes broad journalism, advertising, digital media and
performing arts" (in text citation). He was the perfect candidate to be my mentor. By having
Ephraim as my mentor I learned to create a detailed plan to effectively market my product. This plan
included who my target audience was (a student body of 1,500 students), my means of advertising
(the school newspaper and various social media sites), and how I planned to sell my chess board
(online marketing through Amazon and possibly trying to get it into a

A Report On The Autodesk Cfd Program
In recent times, CFD analysis, with the advent of computer architectures with superfast processing
capabilities are rapidly emerging as an alternative to wind tunnel tests. In vehicles body
development, reducing of drag is essential for improving fuel consumption as well as protect the
global environment and the aerodynamics refined body is also aesthetically attractive, it will appeal
to the customers. In this papers the process taken to optimize the shape of a vehicles . The Autodesk
CFD program was used to iterate toward a converged solution with the goal of obtaining a better
flow around the vehicle. The results are analyzed and only the drag force is compared with a
recognized journal to validate the results. These practices were detailed in hopes that further
research would use the ground work laid out in this paper to redesign existing vehicles in order to
improve handling and increasing fuel efficiency.
Key Words: CFD, Drag, Velocity Vector, Cavered Van
1. Introduction
Not only to save energy but also to protect the global environment, fuel consumption reduction is
main concern of automobile development. In vehicle body development, reduction of drag is
essential for improving fuel consumption and driving performance. An aerodynamically refined
body is not only aesthetically attractive but also it will contribute much to increase the vehicles
appeal to the

Fayol’s Management Theory Is Still Relevant Today.
Introduction Henri Fayol's theory was almost a century old and was originally written in French.
Further review on several journal articles has led to an overview background of Fayol's working life
which provided the foundation that conceptualized his theory. According to Wren (2001), Fayol was
appointed as the Director in a mining company, Decazeville, where he succeeded to turnaround the
company to become profitable. Fayol was the first person to classify the functions of a manager's
job. Fayol (1949; as cited in Wren, 2001) identified five key functions in managerial works.as
planning, organising, command, coordination and control. Planning consists of any managerial work
that involves setting goals and coordinating actions to ... Show more content on Helpwriting.net ...
These human resources will be managed by managers as depicted by Fayol (1949; as cited in Wren,
2001). Employees with specific area of expertise will be tasked to act on the set goals and plans. For
example, Autodesk managers and human resource staff will profile potential candidates on their skill
sets and job scope. Companies go across borders in search of new market opportunities and in turn,
have to focus on increased productivity as competition intensifies. Organization structure and job
design are carefully selected by managers to ensure that work are coordinated well with less hurdles
to achieve the established goals in the planning process (Wren, 2001). In the Autodesk's Sales
department, the structure is similar to a family tree where the Sales Managers coordinates the works
of the Resellers and report to the Sales Director who is in–charge of the department. According to
Mintzberg (1980, as cited in Bartol et al, 2011), Fayol's leading function for managerial work is
categorized under the interpersonal role of any managers. With effective leadership in place,
managers can direct and redirect employees through effective communication and use of discipline
and remuneration. This is one of the key to stay on top of the organisation goals and strategies that
have been planned. Thus, the command element of getting the optimum return from all employees in
the interest of the whole concern is critical and applicable. For example, under

Components Of Integrated Project Delivery
What is Integrated Project Design?
There are many different business structures in place which businesses around the world are using
today. One of these business structures, used in the design and construction industry, is called
Integrated Project Delivery. Integrated Project Delivery is a business style which incorporates all
aspects of design throughout the entire design process. This includes, but is not limited to, all
participants, business coordination's, and business systems, and the way they interact with the
specialties of the participants, in turn producing fluidity within the design and a highly effective
final product. The main players within IPD are owners, architect, contractors, designers, sub–
contractors, consultants and suppliers.
Collaboration is key within Integrated Project Delivery (4). In order to create this type of building
structure all parties involved must be willing to collaborate. When this happens the result creates an
open, shared business model where no information is hidden or lost in communication. This lessens
the instance of becoming fragmented and disconnected. Early involvement of all participants from
owner to supplier produces a mutual understanding of the goal and outcome of the design and leaves
everyone with an equal understanding of the project. At this point in IPD mutual trust can be gained
as well as mutual benefit while understanding everyone's role in the process. Team building is
another major part of IPD. Under each main

Autodesk Official Training Guide
Mastering AutoCAD 2011 and AutoCAD LT 2011: Autodesk Official Training Guide
Description
Mastering AutoCAD teaches AutoCAD essentials using concise explanations, focused examples,
step–by–step instructions, and hands–on projects for both AutoCAD and AutoCAD LT. This
detailed, real–world resource works as both a tutorial and stand–alone reference. It also includes
information to help readers prepare for the Autodesk Certified Associate and Certified Professional
exams and features both Imperial and metric measurements. Part I introduces AutoCAD's interface
and drafting tools; Part II moves into such intermediate skills as effectively using hatches, fields,
and tables; Part III details such advanced skills as attributes, dynamic blocks, ... Show more content
on Helpwriting.net ...
New AutoCAD 2011 users or other Autodesk software users who want to learn the core features and
functionality of AutoCAD or AutoCAD LT. Mastering AutoCAD can also be used to teach
intermediate and advanced users. If you're interested in teaching a more advanced class or a class on
a niche subject, please contact atcfeedback@wiley.co for suggestions on how Mastering AutoCAD
can be employed. Please also use that email address to share your thoughts about the book and
supporting materials.
Who Should Attend Note
Note: The suggested class duration is a guideline. Topics and duration may be modified by the
instructor based upon the knowledge
Mastering AutoCAD 2011
Instructor Support
The instructor support material is still being developed and will be available for download from this
website soon. It will include: · An introductory letter from author George Omura · · · · Different
syllabi with suggestions for teaching 1–day, 3–day, and 30–session courses PowerPoint slides for
each chapter that you can edit and customize to your liking Additional sample exercise suggestions
for each chapter Test questions and answers
In this Guide Part 1 The Basics
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Exploring the AutoCAD and AutoCAD LT
Interface Creating Your First Drawing Setting Up and Using AutoCAD's Drafting Tools Organizing
Objects with BlocksandGroups Keeping Track of Layers and Blocks Chapter 18 Using Dynamic

Statement For The Three Forms Of Visual Art
STATEMENT OF PURPOSE:
"There are three forms of Visual Art. Painting is art to look at, Sculpture is art you can walk around,
and Architecture is art you can walk through" – Dan Rice.
Since childhood, I have been very passionate about art may it be drawing apple in nursery class, my
first painting of sunrise and sunset scene in 1st standard or singing my own written song on the very
first day of college and being awarded as fresh talent in the university. I have always had a certain
kind of tilt towards art because of the fact that art creates things which is soothing to me, which
actually gives me relief. I use to find immense pleasure in painting, drawing, singing and writing but
at that time I didn't knew what I wanted to be, but in my late childhood whenever I was asked what I
wanted to be my answer used to be a painter. However in high school I opted for non–medical rather
than arts. These two years of high school and learning science didn't gave me pleasure which
brought me to a firm decision that I will not opt for science further rather I will follow my passion.
Fortunately my parents also noticed my passion about art and they encouraged me further to unleash
my creativity. ... Show more content on Helpwriting.net ...
Architecture is much more what I thought while joining an architecture school. In my bachelor's
degree in Lovely School of Architecture and Design, I gained the foundation necessary to place me
in the Architecture field. The four year curriculum gave me vast knowledge on various subjects
starting from art movements to history of classical architecture and then to various architecture
styles; from Romanesque to Revivalism to Modernism. Other subjects like building construction,
building services and materials, structure design, estimation and costing provided me with
techniques and tools required in practical

Lightwave Essay
Lightwave is a software package for the use of rendering 3D images. These can be animated and
static renders of images and it includes a rendering engine within it to support reflections that look
realistic, refraction, radiosity and caustics. It supports both polygon modelling and subdivision
surfaces. It is developed by NewTek Inc. and it can be used on the AmigaOS, Windows and MacOS,
it uses animations, visual effects, product design, architectural visualisations etc and can be used
with everything that a 3D software can do. It also can use 999 nodes in a render farm. Not only can
it do this but it is also able to be programmed through its software development kit allowing the use
of LScript which is its proprietary language and C ... Show more content on Helpwriting.net ...
This can run on Windows, MacOS and AmigaOS. Price ranges differ greatly dependent on what
license you want to get for it. If you were to get a license for Cinema 4D from Maxon there is a
prime application, a broadcast application which includes motion graphics features, visualise which
includes architectural designs and studio which includes all modules.
Autodesk Softimage/Softimage|XSI
Softimage XSI or Autodesk Softimage, is a discontinued software that was used for 3D modelling
and computer animation. It was used for video games, films and televisions through advertising.
Jurassic park, Predators and Elysium was made with Softimage XSI and it was a good renderer in
the past, but after Autodesk bought Softimage, they discontinued it and it is used as a trial version of
Autodesk software and it is outdated now. It was able to be used on windows and Linux, this
wouldn't be viable to use within classrooms due to it being out of date and this means there would
be no job opportunities in it and Autodesk refer you to use Maya or 3DS Max instead.
Blender and BLEN
Blender is a free and open–source 3d computer graphics software product and it is used for creating

Relationships Among Bim, Ipd, And Lean Construction
Relationships among BIM, IPD, and Lean Construction
In general, IPD, Lean, or BIM is a particularly new controversial phenomenon in the construction
industry that generates many debates and discussions around each component's advantages and
disadvantages, effectiveness, and potential risks (Guerra, 2010). As BIM's complementary
connection to IPD, there are numerous questions regarding requirements of using BIM in IPD–based
projects. Like BIM–IPD considerations, is Lean construction really necessary for every IPD–related
project or only enforced by the project team favor? Interestingly, many construction professionals
question that whether or not IPD can implement without the use of BIM as well as Lean principles.
One step at a time, these inquiries are still exploring by experts and analysts whereas attempting
efforts of combining those three elements in construction projects are currently promoted as
dominant worldwide tendencies. Thus, interdependent corporations of ILB need to be carefully
evaluated in order to flawlessly synergy them in real world cases. Specific partnerships for each
combination of two factors will be subsequently revealed and examined in next section. Figure 2.1
points out the MacLeamy Curve for construction phases and costs through perspectives of
Construction Users Roundtable (CURT, 2004). As mentioned above, IPD, Lean construction, and
BIM not only remarkable share numerous mutual characteristics and common goals in quality, cost,
and time, they

The Six Levels Of Gamification
CHAPTER 4 ANALYSIS The aim of the chapter 3 is: 4.1 To analyze the six levels of gamification.
4.1 The first level of gamification is the game This is the first level of analysis. At this level, the
game explains the reason of caring gamification through these basic points and reasons serially step
by step to study for a business gamified system. These basic points and reasons are as follows:
aaluable games in serious business; definition of gamification; game concepts employed in the
business and most effective gamification. 4.1.1. Valuable games in serious business At the first level,
the researcher tried to find out the reason of value to care about gamification. Let us start the
analysis with the story of Ross Smith. It ... Show more content on Helpwriting.net ...
The design and development of the gamification should avoid complexity. The gamification system
should provide an easy tutorials or experience to learners. So that learners could learn about the
rules of the game at the beginning without any difficulty. Therefore, the expectation of the
gamification should be the learners who learnt the maximum. In the gamification, the leaderboard
sbould be small. The learners should be allowed to choose their own game partners to place on a
personalized leaderboards to a larger goal. Only a relative position on the leaderboard should be
shown. It might be shown the five scores above and the below one score of a learner. However, the
learners should be allowed to access to the top scores openly. Levels and badges should be used
appropriately to guide learners. The learners should be guided with linear content and tie every level
to achieve a specific learning objective. The gamification should let learners know about the levels
they needed to complete the whole learning process. The badges for showing non–linear progress in
the game. It could be tied to terminal and objectives. It also could show off badges to leverage the
social effectiveness of gamification

Haircuts
An Insight Into Virtual Reality
Virtual Reality is a creation of a highly interactive computer based multimedia environment in
which the user becomes a participant with the computer in a "virtually real" world1
We are living in an era characterized by 3D virtual systems created by computer graphics. In the
concept called Virtual Reality (VR), the virtual reality engineer is combining computer, video,
image–processing, and sensor technologies so that a human can enter into and react with spaces
generated by computer graphics.
In 1969–70, a MIT scientist went to the University of Utah, where he began to work with vector
generated graphics. He built a see–through helmet that used television screens and half–silvered ...
Show more content on Helpwriting.net ...
Virtual reality engineers are space makers, to a certain degree they create space for people to play
around in.3 A space maker sets up a world for an audience to act directly within, and not just so the
audience can imagine they are experiencing a reality, but so they can experience it directly. "The
film maker says, 'Look, I'll show you.' The space maker says, 'Here, I'll help you discover.' However,
what will the space maker help us discover?"4
"Are virtual reality systems going to serve as supplements to our lives, or will individuals so
miserable in their daily existence find an obsessive refuge in a preferred cyberspace? What is going
to be included, deleted, reformed, and revised? Will virtual reality systems be used as a means of
breaking down cultural, racial, and gender barriers between individuals and thus nurture human
values?"5
During this century, responsive technologies are moving even closer to us, becoming the standard
interface through which we gain much of our experience. The ultimate result of living in a
cybernetic world may create an artificial global city. Instead of a global village, virtual reality may
create a global city, the distinction being that the city contains enough people for groups to form
affiliations, in which individuals from different cultures meet together in the same space of virtual
reality. The city might be laid out according to a three dimensional environment that dictates the

Summary: Motoresk Autodesk Inventor
The design was created using Autodesk Inventor 2018. We started by measuring the lengths and the
taper of the guitar neck. We then created the base of our design (Figure 1) which is 0.125 inches
thick in a trapezoidal shape. It has a height of 6.250 inches with base lengths of 1.87 inches nearest
the knut of the guitar together with 1.93 inches at the end of the 5th fret. We printed two of these to
be the top and bottom platforms of our design. The printing was done at a medium infill to make it
more structurally sound than our last prototype. Additionally, medium infill permits sanding off
printer imperfections. We offset the holes within each fret so they could be double the diameter than
if they were in a straight line. This gives more surface area of the button for contact with the finger,
spreading impact more equally through the finger in preference of directly impacting the joints. ...
Show more content on Helpwriting.net ...
There are 30 buttons total. They are cylindrical with a filleted edge to reduce time spent sanding.
The buttons were created to have the maximum diameter possible considering the spacing between
the guitar strings, so the button ended with a diameter of 4/10 of an inch. The height of the cylinders
was created with the consideration of how long the button needed to be to press the string down
while still being short enough to be comfortable to press. It was decided that 9/10 of an inch tall was
an appropriate height for the button to be at. They each will have a small spring wrapped around
them which allows the button to pop back up after being pressed down. Printing was done at a very
high infill because the buttons absorb the most stress in our device and they need to be able to last as
long as the rest of the device. The high infill also helped the sanding process, which was lengthy
because of 3D printer imperfections and the need for a button to be able to move through the holes
without creating

Building Information Model ( Fm ) Maintenance And...
Introduction: To start with, this self–reflection is consisted of two parts, the first part is majorly
related to the lecture experience that help me redefine the Building Information Model (BIM). While
the second part is about the experience and knowledge that enhance my knowledge about the BIM
enable services provided for Facility Management (FM) maintenance and operation. Originally, the
concept of BIM is more related to a geometric model provided by the specific software platform, in
which the most of the information is provided by the building designers, such as: architects and
engineers. However, throughout this module, the concept of BIM, in my mind, is totally redefined
and renewed. How BIM really is: After listened to the lectures give by lecturers and other guest
lecturers, I realized that the BIM is not just a specific software platform. Firstly, In my opinion, BIM
is not longer an generation of stochastic in building consultant, it is caused by the needs of
construction industry revolution. After reviewing the background history of the construction
industry for last decades in lectures, it is recognized a significant productivity decrease in the
construction industry (lily lecture slides, intro, P7). It means there is an hurrying need to improve
the automation, information management, supply–chain management, and collaboration tools of the
AEC industry. Because, it has been proved by many scholars that there were many benefits and
resource savings if the BIM

Project Plan And Workflow For Complete The Final Video
Project Methodology:
In this chapter, I present the project plan and workflow I used to complete the final video. In the
last part I discuss other software programs used to accomplish other tasks in the post production
stage.
Production Workflow:
The process to complete the insertion of a CG into a life–footage is the same as a media production
workflow. The matchmoving process is part of an animation workflow which is part of the
production
workflow. To achieve the final footage there is need to incorporate inherit workflows together.
Video Production Workflow:
To create a film, the process need to follow the basis of the media production workflow.
Figure 1: Video production Process
Preproduction: This is the beginning of ... Show more content on Helpwriting.net ...
This is the main focus of this project.
After my research into the matchmoving workflow, I decided to create an adaptation of a workflow
that
will suit this project.
Figure 2: A basic VFX workflow showing the production stages.
I decided to combine the production workflow and the basic matchmoving workflow so as to
accommodate
changes during the project. In figure1 below it shows a basic animation production workflow with
the
corresponding video production stages and figure2 is a basic matchmove workflow with the

different
production stages. The incorporation of CG into a live footage involves a large scale of processes.
Figure 3: A basic Matchmove workflow showing production stages.
In a simple VFX scene, the animator is responsible for the 3D creation, a visual artist is
responsible for the composite and the key role is played by the matchmover who create the CG
camera
from the real camera and ensure others have the generated CG scene to work with. The
matchmoving
usually happens early in the production workflow.
Figure 4: Adapted Workflow for the project.
I was able to derive this workflow for the insertion of the 3D into the live action–footage. The
production is divided into 3 stages as a normal video production process.
Pre–Production: I decided to have this into 2 stages. The first stage was a plan of the video
sequence plot.
The evaluation stage is a part of the matchmoving process but doesn't

Health And Safety Requirements For Computer Aided Drafting...
LO 1.1 Health & Safety Requirements for Computer–Aided Drafting and Design (CADD) Users.
The current requirements for health and safety for CADD users who use Visual Display Units
(VDUs) for their work, is specified by the Health and Safety (Display Screen Equipment)
Regulations 1992. In this section of the assignment, I will identify some of the most common health
and safety concerns and specify the steps that employers and employees need to follow in order to
comply with the law and to work safely, including guidelines for workstations, work environment
and other equipment. Physiological Factors Affecting CADD Users VDUs is a term which
encompasses monitors, display screen equipment (DSEs) iPads etc; any screen (usually forming part
of a computer) that displays text, numerical data, or graphics. VDUs have been accused of causing a
whole range of health problems, but in general these health issues arise as a result of VDUs being
used incorrectly rather than the VDUs themselves. One of the most commonly reported health issues
relating to VDU usage is repetitive strain injury (RSI) however the cause is usually a more
generalised group of disorders known as 'upper limb disorders'. (Health and Safety Executive, 2011)
Many of the disorders affecting the upper body are exacerbated by stress that can be mitigated by
making some simple changes to the work environment. Firstly, ensuring that employees have
undertaken the correct training in how to use hardware, software and

A NEW CHALLENGE FOR PROJECT MANAGER: BIM
IMPLEMENTATION IN...
A NEW CHALLENGE FOR PROJECT MANAGER: BIM IMPLEMENTATION IN
CONSTRUCTION PROCESS
University of Greenwich
Course: Project Management Course leader: Nicola Callaghan
Student: Maria Donatella Fiorella ID: 000807685
Deadline: 31/03/2014
Table of content
INTRODUCTION 3
PROJECT MANAGER ROLE AND SKILLS 3
BIM: NEW STANDARDS FOR GOVERNAMENT CLIENTS 4
BIM INTRODUCTION 5
ADVANTAGES AND BARRIERS OF BIM 6
HOW TO MANAGE A BIM IMPLEMENTATION 7
CONCLUSION 9
REFERENCES 11
INTRODUCTION
In the past the project manager (PM) mostly focused on standard procedures, but the growth of
project dimension and complexity have requested new skills and approaches for delivering
successful ... Show more content on Helpwriting.net ...
The PM is the responsible of overall project success, in term of respecting budget, quality level,
timetable, organization strategy and satisfaction of clients (Sommerville, et al., 2010; Project
Management Institute, 2012).
Hence, the PM role includes all those necessary activities to deliver a successful project as
communication, organization, coordination, budget control, planning, decision–making, risk
analysis and project team building (Mintzberg, 1973; Project Management Body of Knowledge,
2009; Sommerville, et al., 2010).
However, in order to be performing, PM should develop a good balance between hard and soft
skills. Hard skills are based on the technical and scientific knowledge and they regard schedules of

procedure and project, as for example, economic analysis, risk analysis, value engineering and
contract administration (Garwood, 2012).
On the contrary, soft–skills refer to the personal and interpersonal skills, necessary to work in
organized community. Nowadays, they are becoming indispensable skills for success, due to they
are an essential tool to make hard skills operative, performing and competitive on the market
(Bourne & Walker, 1999; Cooke & Arzymanow, 2003; Pant & Baroudi, 2008; Garwood, 2012;
Mitchell, et al., 2010). For instance, communication results the most important soft skill for PM,

Why I Am A Computer Program
Whilst other children my age were out playing in the sun, I was indoors tinkering with an old
desktop I put together. The refurbished systems disposed of by were like treasures to me. Every
other day I would climb into the skips to find components I could use to upgrade my system. I
remember feeling ecstatic about the fact that I had literally built the system from scratch, installed
an operating system and could browse the internet using a dial–up CD provided by AOL. Given the
lack of security software at the time, it was not long before I was confronted by a virus. The start bar
had vanished and I could not control the mouse or keyboard, and upon every reboot, a daunting logo
image would be maximized, rendering my desktop useless. I was furious but also curious as to how
a person could create such a program. It wasn 't the malicious nature of the program itself which
sparked my curiosity, more so the fact that this individual had created something that did exactly as
they wanted. I decided I would attempt to find out how one can write a program and came across
Visual Basic 6 after a few yahoo searches. After writing my first Hello World program, I managed to
maximize an image on the desktop and disabled both mouse and keyboard input. I then had the
program run at start–up, recreating the initial behaviour of the virus. This motivated me to continue
learning through trial and error and after a year had passed, I felt proficient enough to not only
answer threads on most of

Designing A Carcase Table Using The Appropriate Woodwork...
Carcase Table Investigation
MYP Criteria A: Investigation
Harry Brown
Stuart House Mr. Riddell
Problem Statement
In this task I will design and create a carcase table using the appropriate woodwork skills. To
complete the task, the carcase table will be made out of wood and it will be designed according to
the specifications. First I will sketch and design my carcase table to make sure that it fits the right
specifications. Then I will construct it in the workshop using such machines as, the router, the drop
saw, and the band saw. Once it is constructed, it will be sanded to make sure it is nice and smooth
and it will be varnished with a particular finish. Once the carcase table is constructed and varnished
I will test it to see ... Show more content on Helpwriting.net ...
There are many benefits of doing this project. I will learn how to use the different woodwork tools
and machines used to make wooden things like a carcase table. I may also learn about marketing and
how similar things can be produced and sold. I will learn some good life skills and I will know how
to construct wooden object using the different woodwork machines and tools.
To complete the task I will design my carcase table according to the correct specifications and
measurements. Once I have designed my carcase table I will create it in the workshop by first
cutting it out and gluing the appropriate pieces together. Once it is constructed I will sand it and put
a finish on it.
Existing Products
Description: A very modern Carcase table. It is very square and has curved legs. It would suit
someone with a modern life style.
Positives: It is very eye–catching, and appeals to the target audience. It enhances the décor and
would look great in a modern home. The rectangular top of this carcase table would be quite easy to
make.
Negatives: The legs are curved and would be quite hard to make. The legs would all have to be the
exact same in size and volume which would be extremely hard to do. The knob used to pull the draw
in and out is metal, which is not aloud.

Description: An older style carcase table. It has a round top and curved legs.

Investigating The Process Of Game Developers Use For Make...
For Research Project I have chosen to investigate the process that game developers use to make a
video game. Games have been around since 1951 when the first game Pong was invented, which
took to an international stage (Pong Story, 2013). Since then technology has evolved, which has
allowed game designers to make more sophisticated and technical games, which gives the players a
more realistic experience. What kind of software are used to make game? 'After designing the game
's concept, as well as the characters and environments; the next step is to make it digital', (Tim
Crosby, 2008). There are many software packages available for beginners to experienced designers.
Depending on how skilled a designer is; they are able to get software packages that range from drag
and drop functions to, software that will need coding skills to make the game. Most software
packages come with tools to make two dimensional (2D) and three dimensional (3D) games.
Software that you can use to make a 2D game. Software that can be used to make a 2D, which is
recommended, by both my secondary and primary source is Game Maker. Game Maker has many of
the tools that a game designer would need, all in the one software. It allows you design many
different types of games and has in built game engine. It also supports game development for
multiple platforms including Windows, Mac, Android, IOS, Windows Phone, HTML5, PlayStation
4 and Xbox One (YoYo Games, 2016) Software that you can use to make a 3D

Mitochondria Essay
The mitochondria's structure is very unique. Every mitochondria is shaped perfectly to help
productivity. It is made up of 3 main parts, The outer membrane, inner membrane, and a fluid called
the matrix. The outer membrane makes up the shell of the mitochondria which holds it all together.
The inner membrane is what folds over many times in side the mitochondria creating layered
structure called cristae. The final structure part is the matrix which is the fluid that creates the atp
and is located in the cristae.
The mitochondria serves a main purpose of creating ATP for the cell. ATP or adenosine triphosphate
which is used as energy throughout the cell. The matrix part of the cell is where the citric acid cycle
takes place, which is what makes ATP. The inner membrane keeps the matrix in place and allows the
ATP to channel through the mitochondria. The ATP created is then later used as chemical energy in
the rest of the cell. Essentially, the mitochondria is the powerhouse of the cell.
Mitochondrion can be found in all organelles, prokaryotic or eukaryotic. Some cells such as red
blood cells have few mitochondrion but there is only 1 organelle known to not have a mitochondria.
Since the mitochondria's purpose is to create ATP. Most cells must have it.
Mitochondria have a unique oval like shape and are one of few organelles with a ... Show more
content on Helpwriting.net ...
I chose to 3D print my model because I thought that would be the best way to get as accurate as
possible. Over the course of thanksgiving break, I used autodesk (a 3D CAD software) to design a
model of the mitochondria. I made sure to include all the main parts of the mitochondria. Once I 3D
printed it, I colored the organelle to look like a mitochondria and also to use as a key for all the parts
of it. My inspiration came from photos and cross sections of many mitochondrion I found on the
web. The cross section inspired me and that's what I ended up

How Can Bim Technology Assist in Optimising the Life Cycle...
Paper for the 16th Pacific Rim Real Estate Society Conference Wellington, New Zealand 24–27
January 2010. How can BIM Technology assist in optimising the Life Cycle Cost of a Building? By
Francis Pf Lai, Dulani Halvitigala, John Boon, Roger Birchmore Department of Construction,
Unitec New Zealand Abstract The complexity of a modern construction project, especially in a fast
track environment, necessities the use of Building Information Management (BIM) system to
manage such a project to provide the necessary probable cost outcomes of alternative designs ahead
of the actual construction times. The visualization of such alternative designs through 'prototyping'
design solutions has the definite advantage of identifying ... Show more content on Helpwriting.net
...
The full Ecotect analysis is then applied to the design to capture the effects to the building over time
by simulated visualized outcomes in the form of 2D drawings representing the differing time spans
of the life of the building. The benefits of using BIM in modern construction project management
have been well recognized. Eastman et al (2008)[7], for instance, have described the use of BIM for
developing models that enable computational based analysis and simulation to be undertaken.
Soubra (2008)[8] has discussed the ability of BIM to model "comforts" including thermal, visual,
acoustic and air quality. Vaizidou (2007)[9] has highlighted the benefit of BIM's modelling
technique in using the x–y–z axes for representations of time line: project tasks: design outputs in
projects. The concept of the x–y–z axes, which will be discussed to a fuller detail later in this paper,
is of particular relevance as it illustrates the simple idea of representation of the outcomes from
Ecotect applications. The use of BIM techniques has therefore achieved widespread commercial use
in building designs. "The Contractors' Guide to BIM" published by The American General
Contractors Association[10] identifies BIM as a tool that enables the construction industry to: "more
efficiently operate in new and increasingly expeditious ways. Initially, BIM and 3D models have
primarily helped eliminate design conflicts with far

History Of NX : A Solid Modeling Program Created By Siemons
NX is a solid modeling program created by Siemons which is used by multiple companies around
the world and is deemed an industry standard. This semester was the first time I had heard of NX
and at first, I was a little weary as to how I would adjust to using it. I previously had only used
AutoDesk Inventor and AutoCAD, but due to NX's layout being extremely similar to that of
Inventor it made the transition very smooth. NX has some good inclusions when compared to other
solid modeling programs. One of my favorite features NX includes is the tool search feature. When I
can type in a general tool instead of searching through every menu, it saves a lot of time. Another
feature I truly like is that of the general layout and processes in NX ... Show more content on
Helpwriting.net ...
Although NX has all of these positives aforementioned, there are some downfalls that Siemons
needs to address. Personally, when I used NX there were somethings that I wanted to do that just
would not happen. When I used the assembly portion, there were some constraints that the program
would just not allow for no apparent reason. Unlike Inventor there is no student edition. Meaning
that the only way that I as a student could use the program was to come to the engineering college to
complete the assignment. The assemblies were could be annoying. Sometimes I would place a part
and when I would go to constrain it the part would just disappear. Once you select a plane to begin
designing your part it is stuck there. In other programs, you are able to rotate the axis in which the
part rests. Along with the no rotating of axii you are unable to change the units. If you accidentally
start designing your part in inches you can no switch it to millimeters other than completely
restarting your part. As well as all of the problems mentioned, there are very few online tutorials.
There were times I would try and understand how to use a process through the book and just not
quite get it. I would then search the internet to try and better my understanding and was unable to do
so. Although the book does a great job at explaining the processes there are some errors that NX
would give me that I could not wrap my mind around. Overall, NX is a

Famous Photo Editing Mobile Apps
Famous Photo–Editing Mobile Apps You Need
Snapping and sharing photos has become extremely fun. Today's smartphones are almost like
professional cameras guaranteeing you can take photos on the go without having to carry a bulky
camera with you. But if you'd like to update your photography game and ensure your Instagram
photos are a bit more professional, you need the help of a good photo–editing app. Here are some of
the most famous and convenient apps you should download for your iOS or Android phone.
Snapseed
The photo editor is perfect for when you want to tweak your images with layers and colours. It's
rather vast app, allowing you to change the image's exposure, colour, rotations and even correct the
perspective. Furthermore, you can use it to add frames from a wide collection and add text to your
pictures.
The app is easy to use and more importantly, it won't cost you a thin to download. Find it on the App
Store and Google Play.
Adobe Photoshop Express
Adobe Photoshop is famous photo–editing software and the desktop application is available on your
mobile as well. The app is perhaps not as detailed as its desktop counterpart, but you can
nonetheless do all the basic editing with it. It allows you to add filters and adjust your photos with a
simple–to–use interface.
The app is available for Android and you can download it for free from Google Play.
VSCO
Another famous photo–editing app for the iPhone is VSCO. The app is also available for Android
under the name

Benefits Of Building Information Modeling Essay
5. Benefits of Building information modeling in Cost Estimation
The cost estimation is the crucial section in the construction industry and estimation of cost is done
depending on the number of labor, material, and the time conditions. The cost estimation is a time
taking process and it seeks the participation of entire cost estimator group.
For estimating the cost, BIM produces rapid cost feedback throughout the lifecycle of the building.
The model has the ability which enables the construction companies to evaluate the project cost with
in–depth and higher accuracy rates where it reduces the cost and the expenses required.
By taking the help from the engineer and the architect the BIM make the cost estimations accurate
and easy when developing the digital form.
The BIM has the capability which carry out the pricing and the quantity take–offs for the cost–
estimation and this is possible because it identifies the real material used in the construction process.
Sattinen and Bradford stated that that BIM is compatible with estimating software like Innovaya
composer, where the software converts the BIM files. It makes the files compatible with the
estimation software like Timberline and the quantity data (Sattineni & Bradford, n.d). The
Innovaya's visual BIM and quantification products make the cost estimator to imagine entire
building model in a 3D cost–oriented environment performs quantifications and finally adds up the
construction data. According to Thurairajah

Personal Finance Case 10-4
10–4. You bought a stock one year ago for $50 per share and sold it today for $55 per share. It paid a
$1 per share dividend today.
a. What was your realized return?
b. How much of the return came from dividend yield and how much came from capital gain?
Compute the realized return and dividend yield on this equity investment.
a.
b. 10–20. Consider two local banks. Bank A has 100 loans outstanding, each for $1 million, that it
expects will be repaid today. Each loan has a 5% probability of default, in which case the bank is not
repaid anything. The chance of default is independent across all the loans. Bank B has only one loan
of $100 million outstanding, which it also expects will be repaid today. It also has a 5% probability
of not ... Show more content on Helpwriting.net ...
The current share prices and expected returns of Apple, Cisco, and Colgate–Palmolive are,
respectively, $500, $20, $100 and 12%, 10%, 8%.
a. What are the portfolio weights of the three stocks in your portfolio?
b. What is the expected return of your portfolio?
c. Suppose the price of Apple stock goes up by $25, Cisco rises by $5, and Colgate–Palmolive falls
by $13. What are the new portfolio weights?
d. Assuming the stocks' expected returns remain the same, what is the expected return of the
portfolio at the new prices?
Value
a.
b.
New Price
New Value
c.
d.
Apple
600
500
12
300000
0.30
3.6
525

315000
0.315
3.78
Cisco
10000
20
10
200000
0.20
2
25
250000
0.25
2.5
Colgate
5000
100
8
500000
0.50
4
87
435000
0.435
3.48
Total
1000000
9.6
9.76
11–50. Suppose Autodesk stock has a beta of 2.16, whereas Costco stock has a beta of 0.69. If the
risk–free interest rate is 4% and the expected return of the market portfolio is 10%, what is the
expected return of a portfolio that consists of 60% Autodesk stock and 40% Costco stock, according
to the CAPM?
12–26. Unida Systems has 40 million shares outstanding trading for $10 per share. In addition,
Unida has $100 million in outstanding debt. Suppose Unida's equity cost of capital is 15%, its debt
cost of capital is 8%, and the corporate tax rate is 40%.
a. What is Unida's unlevered cost of

Advantages Of Multimedia Design
Abstract
Multimedia design is the combination of image, sound, video and animation to convey a message or
to entertain the public via media devices like laptop, phone, television, and radio. From such, one
can advertise his products and services. With the expansion of Multimedia design in this generation,
learning institutions being part of it.
Various means have been used to make learning easier for students, since it has been discovered that
learning with texts only causes boredom to students. Thus, the implementation of multimedia adds
interest and livens up the lessons.
Multimedia is widely used in schools nowadays to stimulate learning experience for students. In
university multimedia design is introduced as a subject, which is essential ... Show more content on
Helpwriting.net ...
Linear Multimedia means the user has no control of the multimedia presentation. For example a
movie presentation in the cinema.
Non linear Multimedia means the user has control or can manipulate the multimedia content. For
example, video games, website.
In this report the main focus will be non linear multimedia whereby it involves the use of
Multimedia to teach students in a University setting, whereby the Lecturer is in control of the
Multimedia content being displayed.
1.0 GOALS
The main goal of this research is to find out how students benefit from the Multimedia Design 3
subject, as well as the mode of teaching employed in this subject, and how effective it is for the
students, especially those new to the 3d platform. Also finding out ways which can be effective in
students learning Multimedia Design 3 as a subject with maximum attention and being in one accord
with the lecturer.
1.2 TARGET AUDIENCE
This research is targeted to students of the Art and Design department of Sunway University and
also lecturers, for it will reveal the information which can be useful for students who would be
aspiring to take Multimedia Design as a subject, as well as benefit the lecturer by suggesting on
improvements in the teaching techniques, as a result, building interest into the Multimedia Design 3

The Need to Expand Monroe College it Department:...
Monroe College IT Department: Recommendations During this present time, the need to expand the
Monroe College IT Department is extremely exacerbated. The current offerings that this department
has are completely insufficient for any college campus. The multimedia room has an inadequate
number of computers and the ones which are there are only able to perform basic functions such as
using Microsoft word or comparable programs. Many of the computers have software applications
which are outdated by over seven years or more. The computers are slow and there are very few of
them, making wait times long and the entire experience very frustrating when it comes to using the
center. At this time, once the renovations are complete, there will be enough room to expand the
current size by 200% and add 100 computers. This will greatly benefit in expanding the number of
students that can be served each day. Computers Selected The media center should have a mix of
both Macs and PCs because both these different types of computers have distinctive benefits to offer
users. However, since this is indeed a multimedia center, there should be a greater number of Macs,
as Macs tend to be more conducive to a range of different programs and software applications. For
the purposes of this proposal, there should be a range of 70:30 of the new computers in Mac to PC.
Part of the reason why it's beneficial to have such a strong mix is that PCs are generally priced lower
than Macs and can help in

The Importance Of Sleep In The House
summer, also it used for sleeping outdoor in the hottest months, the outdoor sitting area considered
as a room without a roof its walls are 1.8m height, to cast a big shadow in the sitting area (Figs14).
In additional; the inner courts (or back courtyard) served as a thermal regulator.
A central staircase is connecting indoor lobby at the ground floor and semi–shaded lobby at first
floor, working as ventilation tower, the two level lobbies are always ventilated by a vertical and
cross stream of fresh air, which is increasing the natural air circulation between house's levels, and
guarantee a refreshing indoor effect (Figs15). Sumer solar study at 5:00 pm (Autodesk Revit) fall
solar study at 5:00 pm (Autodesk Revit) winter solar ... Show more content on Helpwriting.net ...
On the one hand; it was suitable to the local condition (a dry hot climate), this technique makes
relative coolness in summer and relative warmness in winter inside houses, acts as a natural isolator
keeping indoor air temperature mild in both hot and cold season, it is also permeable enough allow
the walls to breathe, the technique of building with earth, adopts the climate conditions, suits the
rates of evaporating and relative humidity, makes comfortable inner space from human. on the other
hand, it is helpful to reach appropriate heights over small surface area with appropriate wall
thickness comparing with masonry brick; its thickness is  50cm for exterior and center walls in
ground floor (double rows), and  25–35 cm for interior and upper storey walls (row or one brick
and half) . It is very flexible material; it is used for cornices, ornate decorations, relief, complex
elements such arches. Finishing is a plaster (mud & straw) to protect the sun–dried mud brick, and
also, it's renewable, its color makes buildings in harmony with the surrounding environment. Roofs
are a plane made of palm ribs rope and leaves covered with mud.
5– A New vision of the architectural Ideology in the oasis:
The inherited architecture ideology concern in function more than form, the main concept is about
how to make comfortable inner environment for human beings regardless the architectural order, so
it is considered with function and stability, but the aesthetics

The Importance Of Innovation Architecture Essay
The Importance of Innovation Architecture
The Merriam–Webster dictionary defines innovation as "a new idea, method, or device" or "the
introduction of something new" (Merriam–Webster, 2016). "New" almost always means change,
which is a word that often strikes fear into the hearts of those who simply like to keep things as they
have always been. Companies who pursue innovation architecture must develop a culture of
innovation that is deeply embedded in its DNA. Otherwise, ideas will perish from malnourishment.
According to John Carter, of TCGen, the co–inventor of the Bose Noise Cancelling Headphones,
"There is nothing more fragile, and at the same time more threatening as a radical new idea that does
not fit into the current culture" (Carter, 2013). This paper will discuss three companies that have
maintained a culture of innovation, some of the key elements that contribute to this and consider
conditions that exist within organizations that stifle innovation.
Innovation Successes
According to John Carter, "The key to unlocking the door to innovation is to develop a culture of
innovation. Without the right culture, no set of tools, methods, or people will be successful" (Carter,
2013). Three companies which are well–known for an effective culture of innovation are Microsoft,
Autodesk, and Whirlpool. Each of these companies has built a culture of innovation by, among other
things, creating an atmosphere in which innovation is celebrated, trained, and rewarded. Innovation

Term Investment Tactics That A Capital Market Analyst
Everything comes at an expense. The world revolves upon an axis of currency. Although this has an
immoral implication, it contributes to capital market analysts having a job. They are responsible for
abetting clients, or investors, distinguish when to purchase/sell their shares in the stock market.
Besides aiding them with stocks, a capital market analyst yields several presentations and
demonstrates they have an established affiliation with the bank. Before helping the investors identify
when to purchase and sell, they must assist them decide on what to capitalize in. There happen to be
various different long–term investment tactics that a capital market analyst may practice. One
strategy they may exercise is investing in a stock and industry that their client comprehends. If the
client has no knowledge in the industry, it remains dangerous since they are not informed on what is
happening within the field. Another approach is to begin investing as early as possible; this allows
the money to have additional time to multiply. The other tactic is to diversify the investments. This
safeguards investors if one industry or the stock crashes; they ensure to not completely lose all of
the money they have invested. As of now, pharmaceuticals and 3D printing happen to be two
industries that remain appropriate for a long–term investment. There are several explanations why
the pharmaceutical industry is a popular long investment industry amid capital market analysts.

Adobe Lightroom Mobile
1. Adobe Lightroom Mobile
This photo editor application is free, but it's required only creative cloud subscription And allows on
all android mobiles. You can edit advanced and different sizes images from this application.
Download it from Google play store. But this app's trial validity only 30 days for creative cloud's
subscribers.
2. Autodesk Pixlr
Autodesk pixlr is a free and most popular application on play store, This is the awesome photo
editor app with the amazing and very popular features. There are so many awesome options for
editing. This is all in one editor app for android phones to make photos. So, must try this application
to make your photos much better.
3. BeFunky Photo Editor Tablets
This app is not free, but the ... Show more content on Helpwriting.net ...
If you need to make your natural photos more expensive and beautiful like a photoshoot, So, This
application is perfect for you. Its app's cost not much, I have much researched of this app. So, I can
recommend you this editor for your smartphone. And this Photo editor will be in your budget also
because its cost is too low. For more information and detail about afterlight editor check it on
Google play store.
8. Fotor Photo Editor
Fotor is the most used photo editor, and this is also paid picture editor. But it's features are amazing.
Which option do you want for editing? All advanced options are available in this one editor. It's
advanced editing option is the only reason to be in best photo editing apps for android.
So here are the 8 best android apps for photo editing. But wait we have a bonus for you. We are
going to tell you two more best free photo editor for android.
9. Photo Editor By Aviary
This is one of the photo editing apps for android. This editor is free too and there are a lot of

advanced options to edit photo better. You don't need to go on PC to make the photos or edit your
own photos. if your android phone's version is low. Don't worry this app is not requires any
advanced categories options for android.
10. PicsArt Photo editor
PicsArt editor is mostly for teenagers and Collage's students who like to make their photos with the

Cad Cam Case
CAD CAM 1.–The common application for CAM is in the manufacturing process, where it helps to
improve the manufacturing process, make plans of transportation, and control the machine tools that
have the task to create new pieces. While the common use of CAD is optimizing and creating new
models future production. This software gives the liberty of create any kind of object that can be
produce by a machine later, or even print in a special printer that students can use. 2.–Here are some
of the most famous CAD software in the market that will be compare between them. ArchiCAD,
AutoCAD, SolidWorks, and Alibre Design are some of the most popular programs among all the
others that you can find in the market today.
Information base on: ArchiCAD AutoCAD SolidWorks Alibre Design
Price The expensive one can cost 795.00$ and the cheaper 36.42$. The expensive one can cost
3,780.00$, and the cheaper 260.00$. The premium model can cost 9,990.00$, and the basic 39.99$.
The expensive model can cost ... Show more content on Helpwriting.net ...
Also, this CAD software is more in few branches of engineering like Architecture, Mechanical
Engineering, Electronics, and others. In the case of SolidWork, there is a report that show that users
of this software are from 80 countries with a total of more that 3,000,000+ users. Also, the article
shows that a great portion of students use SolidWork for training. Now, by looking at AutoCAD,
with their last report about the software, it shows that about 7,000,000 of free AutoCAD where
downloaded during that period. Also, information like how many draws made by the users can give
a number of how many of them are. For example, they told that about 300,000 draws were uploaded
by using AutoCAD cloud in only one week, and in the same period, 150,000 of this software were
download for PCs and

Analysis Of ' Trufx ' An Adelaide Based Visual Effect Studio
Melanie Trieu
Business Owner
TruFX
33 Warwick Street, Adelaide, 5081
ABN: 53 024 921 617
ACN: 007 249 989
TruFX
Business Plan
Prepared: [date prepared]
EXECUTIVE SUMMARY
TruFX is an Adelaide based visual effect studio. We will focus on the creation of visual effects for
national television commercials, small film productions and websites. The target market is small to
medium–size companies that have been established for two or more years.
We will work from a small office within the Adelaide CBD. Melanie Trieu is the business owner and
sole managing director of TruFX. Melanie is responsible for all of the design work and
administrative details. The company is made up of four other employees who are essential to the
company's operation and future success.
Start–up summary
Background information
Name of owners
Melanie Trieu
Industry knowledge & experience/skills of key personnel:
EDUCATIONAL BACKGROUND – Melanie Trieu:
Advanced Diploma of Screen and Media (Specialising in CGI and Visual Effects) at TAFE SA

Technical and vocational skills:
Knowledge in Mac OS, Windows 10 and Windows Office
Lighting and texturing knowledge in the programs Autodesk Maya, Adobe Photoshop.
Practical job experience:
6 months freelance Adelaide Motorbike Group
EDUCATIONAL BACKGROUND – Adam Smith:
Bachelor of Media Arts at UniSA
1 term CDW Studios
Technical and vocational skills:
Knowledge in Windows 10 and Windows Office
Compositing

BIM Advantages And Disadvantages In Malaysia

Recommended

Recommended

More Related Content

Similar to BIM Advantages And Disadvantages In Malaysia

Similar to BIM Advantages And Disadvantages In Malaysia (10)

More from Christina Johnson

More from Christina Johnson (20)

Recently uploaded

Recently uploaded (20)

BIM Advantages And Disadvantages In Malaysia