13-In-1 Research Paper: The Influence of Loyalty in Ship Breaker

13-In-1 Research Paper
A handheld tool set with multiple tools is great to have for around the home, while out biking or
camping. You won't have to worry about something breaking down and not having the right tools for
the job. Nobody carries a toolbox out with them on a bike ride, but a tool for repairs is essential.
Around the Home
It's handy to have a Snap–On tool for repairs like the 870456 13–in–1 Multi–function Tool. While
you're home, you could dig through your toolbox for the correct tool, but it's easier to have
everything you need in one piece. For example, the 13–in–1 has stainless steel tools like a small
knife, an awl and two screwdrivers. This is a tool you can carry in your pocket while you walk
around the home making small, maintenance repairs.
... Get more on HelpWriting.net ...

The Influence Of Loyalty In The Novel Ship Breaker
The dictionary defines the word loyalty as a strong feeling of support or allegiance. Schools across
the nation stand every morning, put their hands on their hearts and pledge their loyalty to their
country. The novel Ship Breaker is about a young boy named Nailer who works to break ships apart
in a futuristic society. His mom died and his father, Richard, became an addict leaving them very
poor and reliant on Nailer's income. One day, Nailer is walking the beach with his friend Pima
recovering supplies after a hurricane, there they find a massive clipper ship with one survivor inside.
The girl inside, Nita, was fleeing capture from her family's enemies and shipwrecked. Soon after,
Richard Lopez and his crew found Nailer, Nita, and Pima and captured them, planning to sell Nita to
her enemies. With a stroke of luck, the three manage to escape from Richard. Nailer and Nita fled to
New Orleans with an unfaithful member of Lopez's crew. While in Orleans, the trio finds work,
allies, and an escape from Nita's enemies. Then, Nita is captured by the enemy who has allied with
Richard Lopez. In response, Nailer set out on the clipper ship of his dreams to find her, and
unknowingly, to find himself. True loyalty doesn't come with any ties, it is unconditional and
without hesitation. In Paolo Baciagalupi's Science Fiction book Ship Breaker, use of symbolism and
conflict tell the story of Nailer Lopez and his journey to find that loyalty doesn't just lie in family,
it's who has your

Bloomberg Core Exam Essay
Where can u get help if you have questins about using ghe apiAlll of the above.
Where can you find a guide on bloomberg to using the apiAll of the above
If one were to pull historical end of day prices for ibm us equity vod ln equity and bmw gr equity all
fo the prices would be dominated in three dif currencyies is there a way to make sure all of the data
is in usd and if so how can one do this?
Real–time/ historical wizard>historical end of day>step 4 of 6
Where can one pull curves for usd curncy with the ability to override info such as the curve date
before dragging the data into an excel sheet
Data nevitationWhat tool can I use to find a list of the earches or alerts that I have saved using {INI}
{ULRT <GO>}
the ... Show more content on Helpwriting.net ...
Data nevitationIf one wanted to replicated the bollinger bands study in xecel for ibm us equity
fouwhich excel tools would you use
Technical anlysis wizard
In order to start launchppad, which command do I use on bloomberg
BLP(go)
Whwre can I find cheatsheets on bloombergAll of the abolveTo find earnings estimates for
com[anies historically and also be albe to specify the period that is being estimated the tool to use is
Financials/estimates wizard/earnings estimates.
Using the realtime/historical wizard>real–time/current, you r trying to pull the real–time volume
for goo us equity. On step 2 of 3 you search volume. You see two field mnemonics appear:
PX_volume and volume how can you tell which one is the real time field?
Step 2 of 3 shows a real–time indicator with red and green arrow icons.
Is it possible using the bloomberg excel tools to see real–time for securities that rade intra–day?
Yes
Is there any tool that allows you to earch for prebuild excel sheets that contain bloomberg
data/anaytics?
1 & 3 only template libraty XLTP<GO>
BDP stands for
Bloomberg data point
Launchpad allows a use to customize their desktop with any security that has a ticker on
bloombergTrue
Which bloomberg excel tool, within the real–time/historical wizard would you select to download
historical weekly data

Essay on Tool Control
Tool control affects safety. Leaving a tool in an aircraft, engine or a piece of support equipment is
not just an inconvenience, it is a safety risk. Realizing this, in our aircraft maintenance department
superiors enforce some sort of tool control procedures. They realize that establishing and enforcing a
tool control program can provide numerous benefits, the foremost of which is safety. The effect of
Foreign Object Debris (FOD) on maintenance costs can be significant. For example, the cost to
repair a FOD–damaged engine can easily exceed $1 million. FOD can also incur extensive indirect
costs, including: Flight delays and cancellations, Schedule disruptions caused by the need to
reposition airplanes and crews work for flight management ... Show more content on
Helpwriting.net ...
Tool control has been specifically designed to be used hand in hand with FOD prevention systems
and procedures. Important part of this is the person who has the authority to release the aircraft in
the event a missing tool or all the pieces of the broken tool is not found, which in our case is the
quality assurance representative from him to the maintenance chief and finally the maintenance
officer who has the final word.
The primary objective of the tool control program is to improve flight safety by eliminating aircraft
accidents, incidents, and associated equipment damage caused by lost or misplaced tools. Secondary
objectives include the reduction of expenditures for additional out fitting and replacement of
missing, defective, or pilfered tools; the reduction of man hours for maintenance task completion;
and a general improvement in the quality of aviation maintenance.
Every morning and every after maintenance action we ATAF which means all tools accounted for.
During any job an ataf should be had at all times, but how many times are you supposed to ataf your
tools? An ataf is performed before the cdi checks your box to be checked out, it is then checked by
the cdi so they can check the box out to you to use, before you go out and do your job on the flight
line in the hangar etc. when you get out to your job another ataf should be performed and you yet
again make sure you have all of your tools, any work stoppage for example,

Support For Children 's Physical Development
Unit 166 – Support others to promote children's physical development in an early years setting
Because of research Physical development is part of the three prime areas of learning in the EYFS,
joining Communication and Language and Personal, Social and Emotional Development, these
three areas are particularly important for the learning development of the under threes, this will
Secure the foundations for future success in all aspects of their life and learning. Early year's
providers and practitioners are required to enable their environments to ensure that they are giving
the children quality experiences and resources to allow them to naturally learn and develop the
physical skills necessary to support them throughout their lives. At our nursery we follow the EYFS
guidelines which give us the approximate age and what the child should be able to do or aiming
towards and what us, as practitioners should be supporting the child to achieve or help them to move
on to the next stage. Providing Physical play experiences for the children such as books to explore,
messy play, painting, climbing equipment and balls and other equipment to throw, kick and catch
will give the children opportunities for moving and handling.
According to gov.uk "Physical activity should be encouraged from birth, particularly through floor–
based play and water–based activities in safe environments" (for children who are not yet walking)
All under 5s should minimise the amount of time spent being

How Can You Make The Whole Process Easier?
Busy online marketers: ever sit down in front of your computer screen just wishing there was an
easier way to do the common, everyday tasks involved in content marketing?
From coming up with amazing ideas to top quality writing, you know by now there is a great deal
that goes into today's necessities that make up great content marketing.
So how can you make the entire process easier?
You need tools that will help you generate ideas. You also need tools that will make the overall
writing process easier. You probably even need tools to market the content for you.
Well, here's the good news about the internet and content marketing: there are many tools out there
built just to help you as a content marketer, and I have a handy list for you. ... Show more content on
Helpwriting.net ...
Their goal is to get right in front of their primary audience, who are high–end travelers.
So you head over to Buzzsumo to see what's currently working on the web in terms of content that
could appeal to the target audience. Buzzsumo will use two ways to find this information: a keyword
based search and a domain based search.
If the client is targeting keywords like "luxury holidays" or "luxury honeymoon destinations," you
put those into the tool and Buzzsumo will return some results. The tool will typically filter out pages
that are focused on selling products and services so you get keyword results that are non–
commercial in nature.
This is a great way to see what's already on the web and get ideas for the target audience.
2. Buffer
For managing your social media, there really is no better tool. And I've tried several! If you need
high–traffic, volume–account maintenance, Buffer is your tool. From Buffer, you can manage all
your social accounts and then some (in our Business account, we have all our staff's profiles hooked
up, too); and schedule posts across all profiles, with the ability to tailor your messages per platform.
Their blog also hosts a wide variety of very useful posts and assembled research.
3. SEMrush
There's no doubt as a content marketer you've heard of SEMrush. This amazing tool makes
researching keywords a piece of cake. Once you've done your keyword research, all you do is add
keywords and track

Dewealt Executive Summary
DeWalt's quality collection of power tools is extensive enough to suit all of your power tool needs,
as it includes a line of 200 power tools, along with 800 accessories to accompany them. DeWalt also
offers accessories to accompany and compensate nearly any power tool that you can envision.
DeWalt is regarded as a top quality power tool manufacturer with a solid reputation. One can
purchase their wares on the web or from virtually any home improvement establishment.
DeWalt prides itself in provide durable and efficient power tools to it's customers, and this
manufacturer values customer satisfaction above all else. DeWalt spends a considerable amount of
time researching the most effective operating practices where their tools are concerned. ... Show
more content on Helpwriting.net ...
It's not difficult to find the ideal DeWalt tool for any application you desire. DeWalt is also known
for their reasonable prices, along with excellent product warranties. DeWalt offers their expert repair
services for any of their power tools and will repair any tool they manufacture if the defect or
damage the tool has experienced is an error on DeWalt's part and they will repair the tool at their
own expense.
DeWalt might also opt to simply replace your tool with a brand new one. DeWalt replacement parts
and accessories for your tools can be ordered on the web. Are you unsure of what your needs might
be? DeWalt offers a complete listing of all of their power tool offerings on their efficient website.
Simply select and click on your specific power tool and the website will provide a list of all the parts
available to you.
Every power tool DeWalt manufactures comes with a complete three–year warranty, which won't
cover normal wear and tear or abuse of the power tool, but covers manufacturer defects. Accessories
do not offer any warranty. However, DeWalt be delighted to exchange any accessories for another
one if the accessory arrives

Information Technology Pros And Cons
Introduction
Today is the world of computers, smart phones, and immediate satisfaction. One can easily pick up
his or her smart phone and Google something for a quick, easy answer. The Google world,
according to Aspray (2011), has actually caused a shift in how people research and find necessary
data (p.234). One does not have to go to the library or a print encyclopedia anymore because a
whole world of information can be at one's fingertips through the use of phones, tablets, laptops, etc.
When it comes to finding information, there are both pros and cons to some of the newer
technology. First of all, one improvement would be that information is much more accessible to the
common person. However, the problem comes when there is so much information available that
almost anyone can contribute the massive information bank so that "fake news" and information that
is not completely accurate, and sometimes simply wrong, can become what people are using for
every day information and research.
Although modern technology has allowed for a lot of bad information to spread, it has also allowed
for easier access to accurate information and the professional sources. Many tools have been created
for finding good sources. Library discovery tools are one type of tool that have made searching for
professional sources yet more efficient.
What are Library Discovery Tools?
Discovery tools, according to Aharony (2015), "provide one–box searching for all library content
with a

Manta Rays Research Paper
have been used when the manta was smaller and would need to defend itself against predators. As
the mantas became larger in the open ocean, they no longer needed to defend themselves with the
sting. Today, mantas have a cartilage stump as a tail where the sting would be connected to. Like all
animals, mantas have several predators. Sharks, as well as false killer whales and orcas have been
known to eat manta rays. Shark bites are seen in all populations of manta rays, but these bites are
quite often taken from the edges of the manta's wings, which heal quickly and do not leave the
manta with long lasting wounds. In addition to predators, manta rays also face large threats from
humans. Fishing lines can trap manta rays, which leave the mantas

Accountability and the Importance of Taking Care of Your...
Accountability and the Importance of Taking Care of Your Equipment
"Accountability" stems from late Latin accomptare, meaning to account. Accountability in the
military is the obligation imposed by law or lawful order or regulation on an officer or other person
for keeping accurate record of property, documents, or funds. The person having this obligation may
or may not have actual possession of the property, documents, or funds. Accountability is concerned
primarily with records, while responsibility is concerned primarily with custody, care, and
safekeeping. Being accountable means being dependable–arriving to work and appointments on
time, meeting deadlines, being in the right place at the right time, doing the right thing at the ...
Show more content on Helpwriting.net ...
Then let's see how it goes when you tell your commander you cannot complete the task because you
left your tool at the motor pool. I will tell you it will not go well. They might let it slide once but if it
happens twice or becomes a habit it may result in an article 15 or even cause you to be separated for
your branch of service. Then what will you tell your friends and family when you return home. You
can't tell them you got separated because you couldn't keep track of something as simple as the tools
of your trade.
I was tasked to write this paper because I was in a hurry trying to get a forklift fixed, and I left my
fluke multimeter in the forklift when I left for CQ duty. I was in a real hurry but that's no excuse.
You see in basic they try to get you to do things while you are tired, hungry and out of your element.
They do this so that you can handle going to the field and know what needs to be done and you don't
make a mistake while doing it. While another NCO in my section found the fluke multimeter it
could have been different. I could have lost that piece of equipment for good. Then what would
happen if I needed that piece of equipment for an important mission? I have realized that me leaving
that piece of equipment could have cost me completing a mission

A Report On Finance Co
1. Attachment
a. Finance Co. has a security interest in the bikes
A security interest attaches when (1) there is an agreement, (2) Debtor grants a security interest in
movable property,(2) debtor had the rights in the property, (3) value is given and (4) there is an
authenticated security agreement that describes the collateral . (1) Here, financing had agreed to
grant working capitol to Mikes Bikes. (2) Mike's Bikes as owner of the bikes has rights in the
property. (3) Finance gave value when they granted Mikes Bikes $250,000 in working capitol. (4)
The agreement Finance sent to Mike's Bikes qualifies as a security agreement. This because it grants
a security interest in the bikes. It adequately describes the bikes as inventory. Even though the fact
pattern refers to it as personal property it is not because the property is held in the trade of business.
The bikes are inventory because they are held by the debtor for sale to consumers. The security
agreement is authenticated by the electronic signature of the debtor in the reply email. This is
because multiple documents that are attached to each other can qualify as a security agreement.
Finance's security interest would still attach to the bikes acquired after March 1, 2015 even though
there security agreement did not contain the terms or henceforth acquired. This is because it is
assumed that a secured party would understand that inventory would be sold and replenished and
would therefore, take a security

I Have A Love Of Two Things : Music And Classic Cars
I have always had a love of two things: music and classic cars. It was of no surprise that I purchased
my first muscle car at the age of 17. It was a 1973 Mach I Mustang. In 1999 I began employment at
Bob's Auto Body in Rochester, Minnesota. I was a general shop assistant that was responsible for
cleaning of the shop, maintenance of equipment as needed, and assisting the auto body technicians.
Within six months I had applied and been accepted to Wyoming Technical Institute (WyoTech) in
Laramie Wyoming with the goal of obtaining the knowledge necessary for restoring classic cars to
even better than their original condition. I attended WyoTech from 2000–2001 and graduated with
an Associate of Applied Science Degree in Collision Refinishing Technology with minors in Trim
and Upholstery Technology and Applied Service Management. I returned to Bob's Auto Body upon
graduation to start my dream of car restoration in 2001. It was not long after graduation that the car
restoration business took a hit. Customers either could not afford the high cost of car restoration or
they were looking for a classic car in its original condition. Due to low work volume and a growing
family, I transitioned to the Collision and Refinishing Department of Adamson Motors of Rochester,
Minnesota, in September of 2003. This position involved the repair of vehicles involved in motor
vehicle accidents being repaired through insurance companies or private pay. I was responsible for
my delegated workload as

Occupational Safety and Health and Safety Control Equipment
QCF641 | Conforming to General Health, Safety and Welfare in the Workplace | 1.4 | State why and
when health and safety control equipment, identified by the principles of protection, should be used
relating to types, purpose and limitations of each type, the work situation, occupational use and the
general work environment, in relation to:– collective protective measures– personal protective
equipment (PPE)– respiratory protective equipment (RPE)– local exhaust ventilation (LEV). | 1.5 |
State how the health and safety control equipment relevant to the work should be used in accordance
with the given instructions. | 1.6 | State which types of health, safety and welfare legislation, notices
and warning signs are relevant to ... Show more content on Helpwriting.net ...
| 4.6 | Describe how to apply principles of equality and diversity when communicating and working
with others. |
QCF643 | Moving, Handling and Storing Resources in the Workplace | 1.3 | Describe the different
types of technical, product and regulatory information, their source and how they are interpreted. |
1.4 | State the organisational procedures developed to report and rectify inappropriate information
and unsuitable resources and how they are implemented. | 1.5 | Describe how to obtain information
relating to using and storing lifting aids and equipment. | 2.1 | Describe their responsibilities under
current legislation and official guidance whilst working:– in the workplace, in confined spaces,
below ground level, at height, with tools and equipment, with materials and substances, with
movement/storage of materials and by manual handling and mechanical lifting. | 2.2 | Describe the
organisational security procedures for tools, equipment and personal belongings in relation to site,
workplace, company and operative. | 2.3 | Explain what the accident reporting procedures are and
who is responsible for making the reports. | 2.4 | State the appropriate types of fire extinguishers
relevant to the work.QCF641. 3.7 | 2.5 | Describe how and when the different types of fire
extinguishers, relevant to the given occupation, are used in accordance with legislation and official
guidance.QCF641. 3.7 & 3.8 | 3.4 |

Case Study : Ring Manufacturing Direction
To: Hein Van Boetzaleaer
From: Lawrence Bridgeman
Subject: Ring Manufacturing Direction
Hein,
I hope you are doing well – I am sending you this e–mail in effort to address your direction to
establish policies for the production and pricing of machine parts, specifically our rings.
To refresh your memory, I will be addressing the concerns with the plastic rings that have been
introduced to the market by one of our competitors, Henri Poulenc. During the initial analysis we
uncovered key data. We will focus on the need to decide how and when is the appropriate time to
switch over to making plastic rings. We must remain competitive in these changing marketing
conditions, and make the best direction forward based on these conditions and ... Show more content
on Helpwriting.net ...
Labor costs in near term:
The next two or three months the plant will not be operating at capacity; during the down periods,
the company has a policy of employing laborers at about 70% of regular wages, on various make–
work projects rather than laying the men off. This time could possibly be used to convert the steel
inventory into rings.
Recommendations:
Recommendation #1:
We could manufacture new plastic rings as soon as we could be setup (see above), but we would
wait until the current inventories of the steel rings and the manufactured steel currently in inventory
were exhausted. This would leave slightly under 50,000 steel rings to sell at current manufacture
rate. At the current sales pace of 690 per week it would take us approximately 72 weeks to sell all of
the steel rings. During this time frame it would be expected that plastic rings would be manufactured
as the standard ring of choice, by not only us but our competitors, therefore eliminating the demand
for steel ring. The special steel in inventory would be manufactured into steel rings. The next few
months are usually a slow down time and we will be able to maintain labor at 70%. This will reduce
the labor cost and some of the expenses that are directly related to labor costs, therefore creating a

Analysis Of Estrella In Under The Feet Of Jesus
The development of characters transpire as a result of significant events in their lives. Events such
as learning a new skill have the ability to transform a character's life. Estrella in Helena Maria
Viramontes' novel Under the Feet of Jesus flourishes into an individual who once got upset over
skills she did not have and was upset at the process of learning, but now understands how vital
education is. Estrella was infuriated by her lack of understanding about the Perfecto's tools and the
letters on the chalkboard. She was especially agitated when the educators would not give her the
answer right away The selection of detail shows the connection between two things she overcame.
The tone and figurative language shows more detail about Estrella's transformation.
The connection between Estrella's animosity towards two skills she did not comprehend shows how
she evolves as a character. When first introduced to the tool, she was enraged by them because of
her lack of knowledge about them. "She had opened the tool chest and all that jumbled steel inside
the box, the iron bars and things with handles, the funny shaped objects, seemed as confusing and
foreign as the alphabet she could not decipher"(4–8). This shows that Estrella could not understand
both the tools as well as the alphabet. Luckily, the tools were similar in Estrella's mind. " The script
A's had the curlicue of a pry bar, a hammerhead split like a V. The small i's resembled nails"(17–19).
This connection of the

Web Analytics Tools And The Intelligent Resource
In many companies, regardless of their size, web analytics has been the answer to numerous
questions. Through its utilization, managers have a grasp of the website, visitors and their behavior
so they can be informed of what's working and what is not. For this reason, Web analytics, to a
certain extent, can drive business results. Along with its increasing popularity, there have been
arguments over what should be the ratio for investment on the tools and the intelligent resource. It
goes without saying that web analytics tools are valuable in gathering data across all the pages in a
website and reporting it in neat graphs. However, tools today are still very limited in their capacity
to recommend actions to top managers. This crucial step ... Show more content on Helpwriting.net
...
Second, most web analytics tools tend to provide a massive amount of data, but they fail to produce
a meaningful overall picture for managers. Magnificent success comes from the brains behind the
people who can answer business questions and not the tool which can only spew out data. To get
maximum value from data captured, independent of tool, we need to drive success from the brains
behind the people who will provide key insight analysis.
Data is important to any business, but it is of no value to the manager if all the work only involves
collecting and reporting data without the ability to drive business decisions. Web tools like Yahoo
web analytics and Google Analytics are good at answering the "what" questions, for example, "what
happened on this page today?" or "What was the best marketing channel last year in terms of site
revenue?" It cannot be denied that this information is valuable; however, successful business
decisions cannot come from these analytics tools alone. They cannot offer the insights that an
analytics expert can by digging through the maze of data to find meaningful information. In a word,
the Web analytics tool is only useful when it is used by a certified analytics person. However, some
companies fall into the trap of data. They are

Helena Maria Viramontes's Under The Feet Of Jesus
The excerpt from the novel Under the feet of Jesus, by Helena Maria Viramontes, shows the
development of Estrella from being angry to understanding what she needed to accomplish to
succeed. Viramontes uses figurative language, selection of detail, and tone to show the changes
Estrella's character goes through to figure out how beneficial it is to know what the letters in the
alphabet looked like in order to be able to read and to be interested in wanting to read.
Viramontes uses figurative language like similes and metaphors to show Estrella's frustration with
her lack of understanding of the world around her her teachers and her understanding of the tools.
The author says, "...all that a jumbled steel inside the box... seemed as confusing and foreign as the
alphabet she could not decipher." (line 5–8). As Estrella looked inside the tool chest she was not able
to identify what the tools were, which caused her to feel anger. Moreover, the author compares
Estrella's confusion of the tools in the tool chest to her understanding of the alphabet that confused
her. This was significant since it showed that just like the secrets she thought were inside the tool
chest, Estrella also felt her teachers were keeping secrets from her. The author says, "Estrella hated
when things were kept from her. The teachers in the school did the same, never giving her the
information she wanted. Estrella would ask over and over. So what is this, and point to the diagonal
lines written in chalk on the

Tribe Intellectuals
The men of the tribe built and used the tools. While making the tools and weapons, they followed
the specific routine for each object. They drilled, carved, engraved, etc. They built the tools at a
place that had an anvil. The activity was done based off the specific tool or weapon because they all
don't have the same building time. The tribe does this activity so they have weapons and tools to
gather their food and defend themselves.
Activity 2: Writing in symbols and pictures Description:
All people of the tribe wrote in pictures and symbols. They're conveying their ideas by covering the
walls with them. The activity is usually done in a home. The activity is completed when the person
writing feels they are satisfied. They do this

The Effect of Technology On Society Essay
Every day the world is changing and things are done differently. Technology has also affected the
way students are taught and in which they learn. It has changed the classroom. Technology saves us
time and allows us to access material in only minutes. "The Internet and online subscription
databases, even as a supplement to the printed works in the library, allow students to see, and force
them to consider or reject, points of view that they might never have encountered in decades past"
(Gow 4).With all the time technology produces, it also has downsides and it also may have created a
less intelligent society. Some look at technology as if has dumbed downed society but if we take a
look at the past we see that it has helped to ... Show more content on Helpwriting.net ...
There are tools that we use that make task tedious easier and saves times. Instead of going and filing
taxes we can go online and do it there instead, and allows us to be more productive (Darlin). Today
we have the world of Google and over hundreds of cellphones, iTouchs, e–books and millions of
websites at our disposal (Loertscher 2). These types of tools bring success to wide range of learners
who face physical, development al, language or personal problems (Loertscher 3). Even though this
tools can help different students with different types of learning styles and problems. Linking into
Google and overflowing learners with information does not make products better or allows students
to learn more. Technology has no real value if it is used for entertainment value or to use up time
(Loertscher 3). "Internet, mobility, and multimedia are important technology tools that are used in
education industry" (Hameed 372).Although the internet is an important tool in the classroom and
out, it does have downsides. Websites have become more commercialized, and this has made
searching through websites difficult since not all websites are reliable. In the Journal done by Shihab
Hameed he says that statistics show that teenagers use the internet more than adults, they use the
internet to play games, listen to music and meet new people. Hameed also mentions that it reduces
student activity. Students are able to get solutions to homework and as result

Symbolism and Metaphor In The Humbling River by Maynard...
The questions, "What does it mean to be human, and how might we transcend human nature?" have
been a subject of debate for philosophical and theological thinkers for centuries. In recent history,
scientific discoveries have led to a resurgence of these ancient debates that break down into three
primary schools of thought. There are those who believe that we, like the rest of the animal
kingdom, have certain basic "programming" that determines our fundamental nature, and those who
believe that human beings are born "tabula rasa" and that nurture determines who we are. The issue
becomes increasingly complex for those with the theological belief that human beings are spiritual
creatures and that our spirituality is what defines us. However, a ... Show more content on
Helpwriting.net ...
The word home is metaphor for the greater culture to which we belong and represents the influence
of that culture on our way of thinking and acting. The sum of all of these forces then, defines who
we are as individuals and serve to define what motivates us to action, our nature. The second half of
the first stanza introduces an extended metaphor describing the motivating factor of human nature,
saying, "To conquer every mountain shown" (Keenan). While the word "conquer," conjures up
images of imperialistic warfare, within the context of this song the word has a broader meaning and
may be more clearly understood as the "will to power and the will to meaning." That is, the driving
forces of human nature are achievement, which is motivated by personal ambition to reach the
highest possible position we may accomplish, and the drive to understand the meaning of our lives.
The word mountain represents every type of obstacle that might get in the way of that goal, while
the word "I" directly refers to the singer and metaphorically refers to humanity as a collective of
individuals motivated by personal self–interest. Taken together with the first half of this stanza, we
see the idea that the defining characteristic of human nature is to overcome, or conquer, every
obstacle that obstructs the will to power or prevents us from discovering truth. The singer then
introduces the controlling metaphor (or main theme) of the song, which is transcendence saying,
"But I've

Ab Wheel Essay
Top 10 best ab wheel
What is an ab wheel? An ab wheel is an exercise tool that is very simple but has a high impact on
the person that is using it. It is one of the most important fitness tool that is very affordable and you
can use at home. It will strengthen your abdominal muscle and will improve your flexibility at the
same time. For beginners, it is a very challenging tool for you will need to workout your core
stability. But it is safe to say that using ab wheels have positive results. All you need to do is to find
a perfect ab wheel and start on a flat surface.
The following are the top 10 best ab wheel that is recommended for a fitness buff like you:
10.Milliard roller wheel – it is a very effective but simple tool to use. It strengthens and tones your
muscles such as back, shoulder, arms and most especially the abs. This ab wheel allows you to have
the most ... Show more content on Helpwriting.net ...
SKLZ core wheels – this core wheels enhances the plank and push–ups exercises than it ever has
before. The wheels on each side causes your torso, shoulders and hips to move harder compared
before. It is sturdy and therefore trusted by professionals and gym instructors. It is colorful and
affordable that combines the look with performance. It is one of the most in–demand exercise tool in
the market today.
06. Lifeline wheel – this is often called as the ultimate core trainer. It has designs and functions that
is best for beginners and professionals alike. It is very sturdy and strong, made of high quality
materials that secures the safety of the user. It is best for strengthening and toning the muscles of
your arms, shoulder and back.
05. Yes4all dual ab wheel – if you are looking for something that is worth your money, then this is
the best choice for you. It has a dual wheel that ensures stability and balance. It is easy and quick to
assemble. It strengthens your shoulder and back but most especially it helps to develop your abs.
You can carry it anywhere you go because this is very

Essay on The Training and Job Information on Carpenters
Introduction
Ever wonder who had built your home? Carpenters did. They build many different kinds of things,
from door frames to houses. You have to complete high school, and then get some training in order
to become one. The carpenters in Alaska get a higher pay than those in the lower 48, which is nice.
Carpenters do many types of things, like cutting lumber and installing insulation. Being a carpenter
is very important because they build the homes of Americans.
Training and Education
In order to become a carpenter, you have to finish school. The minimum requirement is a high
school diploma. After that, you can get an apprenticeship. An apprenticeship is when you work on–
the–job with experienced workers. You learn the basics of ... Show more content on Helpwriting.net
...
Carpenters have many tasks, and it is important that they carry them out.
Skills Many different types of skills are required to be a carpenter. In order to be a successful
worker, they have to have good math problems. Most of the time, workers have to cut and shape
materials to fit in perfectly, which requires math. Another important part is that they have to make
them quick. If a person is slow, then everybody else can be waiting for them. That would slow the
process down, and they may get laid off to get more training. Manual dexterity is a very significant
part of carpentry. People have to have good eye–hand coordination. If someone is too clumsy, they
can possibly injure someone. They have to be able to handle high–powered tools and machines.
Another thing a person needs is good stamina. Most of the time, workers have to lift heavy
equipment and materials. Being strong will keep one from getting an injury. Having good problem
solving–skills is important too. Sometimes, plans change. They will need to figure out how to solve
problems, and modify building plans. A big thing that carpenters need to know about is raw
materials and the costs and delivery of them. Knowing these can make big difference in expenses
when working on a project. One thing carpenters are always working with: tools. There are many
different types of tools. In order to be a carpenter is that you need to know about the different types
of tools

Pediatric Intervention Proposal
Overview of the Problem
The American Academy of Pediatrics (AAP) recommends that all children be screened for
developmental delays using a standardized tool at 9, 18 and 30 months of life. Use of a standardized
tool has been shown to improve rates of referral for early intervention and decrease delays in referral
when compared with developmental surveillance alone. In our hospital outpatient clinic system,
pediatric care is provided both in a 2–site pediatric practice and in 5 affiliated family practice
clinics; care is provided by pediatricians, family practice physicians, nurse practitioners and
physician assistants. Preliminary assessment has found that there is vast variation in the use and
documentation of standardized developmental ... Show more content on Helpwriting.net ...
The clinics are quite different in terms of provider training, size, location, practice mix and clinic
flow. A single quality improvement plan that doesn't look at current practice structure is unlikely to
be successful in all locations. It would be very helpful to do a site visit at each location and
qualitatively assess how early childhood preventative visits are scheduled, what screening processes
are currently in place, what training staff have currently on developmental assessment and how
documentation is done. Because there are only seven sites, it is feasible to map out exactly how
developmental screening fits into preventative care – or doesn't – at each location. At this visit, we
could assess staff views on developmental screening, their perceptions about how implementation
would affect the practice and their interest in being a site champion. It would also be useful to find
out which screening tools different practices are using; the different tools assess somewhat different
information and require differing levels of education and time to administer. The site visits would
provide information on both the structure of care and the process of developmental screening at the

What Is The 10/90 Rule?
The 10/90 Rule is a guiding principle created by Avinesh Kaushik in May of 2006 whose basic
premise is that the budget for a company's analytics program should have 10% of the budget
allocated to the tool and the other 90% allocated to the people who will be supporting the tool: the
analysts. Kaushik advises that even if you purchase the most elaborate analytics tool, you still need
to rely on the analysts to validate and make proper business sense out of the numbers and charts that
the analytics tool is spitting out. From my own personal experience as the analyst for my company's
CRM tool, I generally support this theory. At the moment, I would estimate that we have closer to a
40/60 allocation of budgetary resources for our analytics ... Show more content on Helpwriting.net
...
He specifically reviews the two sides of the budgetary spectrum for analytics tools and how they fit
in to the 10/90 rule. When reviewing free analytics tools, such as Google Analytics, he shows the
obvious issue with the calculation that the 10/90 rule with $0 to the tool would give you a $0
amount to spend on the people. On the other side of the spectrum, he estimates that some tools, such
as Google Analytics Premium and Adobe Marketing Cloud, will cost a flat yearly fee of $150,000.
"If companies spend $150,000 per year on their web analytics tool, then the 10/90 rule would state
that each company should be spending $1.35 million on the brains operating this software." If
estimating a salary of $100,000, "the 10/90 rule states that the company should be able to hire 13.5
analysts to measure what comes in through their premium web analytics tool." While Kaushik
provides a rebuttal for the free analytics software argument in his book "Web Analytics 2.0" by
explaining that most companies would need to hire a company to install and get the tool set up
correctly which would provide you that 10%, I don't feel that is good enough of an explanation to
stand 100% behind the 10/90 rule. I believe that the 10/90 rule should be applied as an initial
"guiding principle" when evaluating the software you will be purchasing and building out your
analytics

Capuchin Monkeys In Captivity: Plexiglas Boxes And Wooden
In captivity, capuchin monkeys are able to learn to use surrounding objects as tools when given the
materials. For example, one study involves clear Plexiglas boxes and wooden sticks. Maize kernels
were placed inside of the clear Plexiglas boxes while the boxes were sealed except for a tiny
opening that was impossible for the capuchins to get through. The only way for the monkeys to get
to the maize was to use the stick to try to break off the cover of the Plexiglas box. Out of the 32
trials, four monkeys were able to use the stick as a tool to open the Plexiglas box. The monkeys used
three different techniques in order to do so. They used the stick by pounding it against the box so
that it would break it open. They manipulated it as a cutting

Strict Liabilty
Strict Liability
Strict Liability
The question this week deals with product liability, on the ground of strict liability. Bob was
shopping at Carl's Hardware store. One of Carl's employee's named Dan was using a nail gun and it
fired without warning. A nail struck Bob in the leg. After checking the nail gun Carl discovers the
manufacture, Eagle Tools, Inc., improperly assembled the tool. Bob files a suit against Eagle Tools,
Inc, for product liability, on the ground of strict liability. The elements for action based on strict
liability will be covered, who the court will like rule in favor of, and why in the following
paragraphs.
The doctrine for product liability applies to the seller of goods. This ... Show more content on
Helpwriting.net ...
The six elements discussed above will de reviewed. First, it seems the product was defective with
the information provided. Second, the defendant is engaged in the business of selling that product.
Eagle Tools, Inc. is the manufacturer. Third, the product seems unreasonably dangerous in its
defective state. The product was dangerous beyond expectation. It fired without the trigger being
activated. Fourth, Bob did incur physical harm. Fifth, was the defective condition the proximate
cause of harm? This is where an argument can be made with the information provided. For Bob he
believes this to be true, so he feels this is met. Sixth, with the information provided it must be
assumed the product was not substantially changed from the time the product was sold to the time
the injury sustained. With all the information provided I feel Bob meets the requirements to file a
suit. The last two questions need to be covered. Who will the court rule in favor of and why? Up to
this point it was been covered why Bob can bring suit against Eagle Tool, Inc. Let's not forget Eagle
Tool, Inc has the opportunity to provide a defense to the claim. With the information provided they
have no defense under Assumption of risk, Product misuse, nor comparative negligence. It was
covered above in the fifth element that there is room to argue the defective condition was the
proximate cause of harm. Dan, Carl's employee was handling the

Methods Of Creating The Cannon
The main purpose of creating the cannon was to familiarize ourselves with the different machines
and techniques that are involved with machining. Throughout the semester, the students are given
the freedom to explore and try out the different machines. It was not uncommon to make mistakes
but then learn from them. The cannon created a way for the students to experience real world
problems and how to fix it on their own.
The cannon was constructed in two parts, the cannon base and the cannon barrel. At the beginning
of the semester, we were given an aluminum cylinder, which would become the barrel. The process
began with using the Dykem layout fluid to paint the barrel blue, so measurements could be marked.
There were several marks made, ... Show more content on Helpwriting.net ...
The barrel can then be inserted into the collet, leaving about only an inch sticking out, and the hand
wheel on the side of the lathe can be used to tightened the collet's grip. To face off the barrel, the
cutting tool needs to be utilized. The cutting tool can be installed by inserting it into the holder, with
the end facing the Live Center Point. This step is very important to making sure that the tool is
centered in height, thus making smooth ends and insuring no damage will be done to the tool. The
tool is then flipped so it is facing the barrel. Next turn on the lathe and use the hand wheel to move
the tool across the end of the barrel until the reference line is reached. The next step is to center drill
the barrel. The Jacob's chuck should then be inserted into the quill. Next center drill the end the
maximum diameter of the ½" center drill. Then change the drill to the 3/8" drill and drill to a depth
of 2 1/8 ". The outside diameter should then be turned down to .835". This is done by loosening the
collet chuck and extending the stock to about 5 ½ " of material is sticking out of the collet. Change
the tool holder's position from the front of the tool post to the side of the tool post. Install the Live
Center in the Tailstock Quill and slide the tailstock down to the barrel, inserting the Live Center into
the hole of the barrel. Tighten the tailstock. Make sure to use a lot of cutting fluid. Starting from 5
1/8" from the end of the barrel,

University Of Georgia Behavior Program
Capuchin Monkeys
1) Introduction: Capuchin Monkeys are found in the neotropical forests of Central America. Animal
Diversity Web states that the Capuchins have, "one of the widest ranges of all New World Monkeys.
" Capuchin Monkeys are easily adaptable to many different habitats. They can live in a variety of
forest types, both wet and dry. The University of Wisconsin Primate Research Center notes that, "All
Capuchins live in dense habitats. They are arboreal and usually sleep on a branch. " This being said
they can survive in an abundance of areas because of their some special features. These features
include strong gripping hands and a grasping tail, giving these monkeys have a wide range of
locomotion. They are able to run, leap, and ... Show more content on Helpwriting.net ...
Then they proceed to slam the rock (as a tool) on the nut to crack it open. Onekind.org mentions that
the Capuchins will collect their palm nuts and then transfer them to the anvils for the purpose of
cracking them open easier. The use of the anvil is another example of the Capuchin tool use. The
Capuchins ability to think ahead and bring the nuts to the anvil show a very skilled way of thinking
in regards to these tools. A third example of tool use in Capuchins is their use of sticks. Onekind.org
says, "capuchins readily insert a stick into a tube containing viscous food that clings to the stick,
which they then extract and lick. " The Capuchins will then use the stick for other things; once they
have a tool they seem to use it for as much as possible, finding multiple different uses for it. They
will use these sticks to get their prey out from tiny spaces and also as, "a rake to sweep objects or
food toward themselves."
3) Captive Capuchins The Journal of Comparative Psychology has one of Fragaszy 's studies where
the Capuchins were studied in labs to try and find food hidden under cups. The first example of this
is called matching to sample. There was a small stair set with two tiers; the bottom containing two
different sized cups and the top tier having one cup matching one of the bottom two. The
experimenter would (out of the monkeys view) put the food under the cup on the bottom tier that
matched that of the top tier. The Capuchins then had

Hand Fitting
1. What are the health and safety requirements, and safe working practices and procedures required
for the hand fitting activities undertaken?
Health and safety requirements, safe working practiced and procedures required for the hand fitting
activities untaken include always wearing your personal protective equipment. You should only use
equipment which you have had correct training on or on equipment which you being supervised
using, you should always use the correct procedures when using this equipment. Before using any
equipment you should know what to do in an emergency situation, and should know where they
emergency stops are on all the machinery which you will be using, you should also know where and
how to use the guards on these ... Show more content on Helpwriting.net ...
7. What care is required when using the equipment and tools?
Not respecting tools can leave tools in poor quality, example a file store correctly in wooden slot and
protect teeth. 8. What is the proper way of storing tools and equipment between operations?
It is important to store tools appropriately so that the tools do not come to wear a tear and become
tools of poor quality. Tools and equipment should be maintained properly and should be put back
where they belong in order to maintain there good quality, for example when using a file, after the
file has been used it should be put back in its wooden slot so that the teeth can be protected.
9. What various types of files are

How To Build A Woodworker's Gym
New Product / Service Proposal
Woodwork gym (NSW Region)
The new venture proposal put forth in the following document explores the idea of a woodworker's
gym. The gym will offer a clean and safe environment which will be a well maintained and staffed
facility. The gym will give members access to all the tools and support needed to exercise the
member's choice of craft and offer an environment and materials to build something amazing or
simply further the members skill set in a safe environment. The gym will offer ample space for a
workshop with ample storage space for the member's projects while also boast training rooms for
seminars and classes hosted by the best artists worldwide catering to all experience levels.
The Woodworker's Gym, is ... Show more content on Helpwriting.net ...
We will implement trademark/service mark to differentiate ourselves from other companies and
competitors via:
 A logo
 A slogan
The above distinctive signs will identify our organization and the service we provide our members
and will be protected under a trademark.
Patent
The second form of intellectual property that must be implemented is Patent. We must protect the
work and techniques of the artist we fly in to do workshops for the reason that getting artists to
showcase and teach how to create their designs in workshops, we must ensure that the gym
members do not copy these designs and use them as their own to make profit from them. In turn we
must get members who participate in workshops to sign confidentiality agreement not to recreate the
artist's design and sell it. The knowledge and designs of the artists are their intellectual property. We
do not want our competition to eventually use the artists we fly in at our own cost to do workshops
for them. Therefore we must ensure artists sign a contract with us that ensure their IP is exclusive to
our woodworker's

Social Work Case Study
Dan Sutton is currently the general manager of Pismo Oceano Vegetable Exchange also known as
P.O.V.E. He was not just handed this job but he has worked hard in many different positions in the
agriculture industry and worked his way up to this position. Dan got into the agriculture world at an
early age when he would help his father out by working on his 5–acre kiwi farm. Dan loved farming
with his dad as a hobby and was the only boy in the family who liked the work. He graduated with
an Agricultural Business degree from Cal Poly in 2001 after 7 long years of being a student at Poly.
He worked with agriculture companies over the summers and part time during his quarters at Cal
Poly. The work was tough and he worked long hours trying to ... Show more content on
Helpwriting.net ...
He oversees most of the operations of the company including overseeing the sales staff, safety
department, food safety, production, harvest crew, finances, and grower relations. He is more
involved with all aspects of the company than I thought he would be. In addition, I learned that he
spends about half of his time in the office and the other half out in the fields or working with people
in other industries of agriculture. I was surprised to find out how much interaction he has with lower
level employees and how much time he actually spends in the fields with the product. I learned
about the unpredictability and fast pace of this job as well. He stated that he never has the same day
twice and really doesn't know what he is going to do each day until he gets his first phone call in the
morning. I found this interesting because it forces you to adapt to situations very quickly and think
on your feet. I also learned that in agriculture you have to be a price taker. This means you cannot be
set on a price because competitors, changes in the market, and quality of each harvested produce can
change the price consumers are willing to pay. Negotiating and financially doing the best things for
the company are an essential part of his

Wood Armor Research Paper
Before the player gets enough metals for armor, weapons and such, it is advised to not worry about
focusing on a certain class at this time since the player should focus on working on getting a house
and mine constructed to get further in the game.
'''Armor'''
*[[Wooden Armor|Wooden, Ebonwood, Shadewood, Rich Mahogany, Boreal or Palm Wood
Armor]], [[Cactus armor|Cactus Armor]], [[Pumpkin armor]]. Each piece gives rather easy stating
defense to player just starting out. The armor that is made out of wood requires 75 wood total of
whatever type it is (20 helmet, 30 chestplate, and 25 leggings). Each set of wood gives different
levels of defense, 3 from wooden, 4 from boreal and palm, and 5 from shadewood, Cactus and
Ebonwood. If the player has early access to pumpkins (during the Halloween season which is
October 20 to November 10) it is highly advised to use this armor set over the wood and cactus
since it gives 7 defense. ... Show more content on Helpwriting.net ...
The spear while is a great weapon to use this early in the game is hard to depend on since it can only
get obtained from surface chests.
*[[Wooden Bow|Wooden, Ebonwood, Shadewood, Rich Mahogany, Boreal or Palm Wood Bow]],
[[Wooden Yoyo]] The Wooden bows are the key essential for anyone wanting to get out of the melee
area since it is the earliest way the player can get a non melee item in the game. The bows can't be
used without there being arrows of some type in the player's inventory (either in the main inventory
or the Ammo slots). The Yoyo is a rather simple thing to make (just requiring wood and cobwebs)
which can be used to keep away annoying mobs, like slimes or

Tool Use And Behavior Of Wild And Captive Capuchins
Tool Use and Behavior of Wild and Captive Capuchins
Introduction
The capuchin monkeys are known as one of, if not the most intelligent monkeys of all New World
species. They reside naturally in the forests of southern Mexico, the West Indies, and Central and
South America, but can be found in zoos and captivity around the globe. Capuchins regularly eat
fruits, insects, and nuts, and spend the majority of their day foraging for food. Capuchins travel and
live in groups, residing in the treetops and canopy of the forest; however, the monkeys will travel
along the forest floor as well. They have prehensile tails that are the same length as their body, have
opposable thumbs, and primarily range from light to dark brown with white facial markings.
Tool Use Among Wild Capuchins While reports of tool use in wild capuchins are moderately scarce,
there is no doubt that tools play an important role in the capuchin lifestyle. The most common tool
used amongst capuchins are stones, which predominantly aid in palm nut cracking and digging.,
Palm nuts and other enclosed foods have protective coatings surrounding the sustenance held inside.
To break open and remove the outer shell, they place the palm nut onto a boulder or large flat stone,
called anvils, and bang a smaller stone against the nut until cracking occurs. The stone has a
hammer–like effect and is sufficient in cracking open palm nuts. Each of the capuchins crack palm
nuts through various methods of efficiency, and is more

Education Is An Essential Practice
Walsh, K
11/06/2016
Soc–110HA–CL02
Journal 2
Efficiently in education is an essential practice, within myself, in order to achieve and retain
longevity within my current academic schedule, in order to project an optimistic outcome my
performance, I have found the current use of equipment choice, to be my basic laptop(pg,63(par22))
(Ritzier, George,) (2015), no whishes or bells, just simplicity. Whoever, within simplicity, academic
efficiently, has been challenging. the systemic bureaucracy of achieving educational efficiently, has
most defiantly been a learning experience, in developing positive performance in acquiring
academic proficiency.
In order to achieve as a consumer, who has purchased my education, to reach proficiency, in term of
my current educational goals, simplicity, is the key aspect in with my educational structure. I
currently choose, to opt off social media cites, such as Facebook,(facebook.com(pg,63) (Ritzier,
George,) (2015) when currently in study, as I seldom play games on social media, however, I find
my smartphone to be an essential tool, in simplifying in my life style. In terms of equipping,
smartphones are indeed an effective tool to convert all my social media, educational tools, and
career tools, one for instance is LinkedIn.(Linkedin.com) (pg,63, (par22)). I find in developing a
greater understanding in my educational practice, I currently use online dictionaries, such as
"Webster's dictionary online" (www. Merrian–webster.com)

Minoans Double Axes
Double axe (labrys) Archaeologists have found a number of artefacts depicting double axes. In most
cases, female figures are shown holding the double axes. We are yet to uncover any sources that
show male figures holding the double axes. For example: Archaeologists have found bronze, lead,
ivory and gold double axes across Crete. The Agia Triada shows some priestesses making offerings
before the double axes. The Minoans depicted priestesses holding double axes on rings and seals.
The Minoans carved double axes into the walls and pillars at Knossos. The Minoans carved double
axes onto stone vessels. We do not actually know what the double axes represent. However, based
on the archaeological records we assume that it was used by priestesses ... Show more content on
Helpwriting.net ...
However, other historians (such as Evans) believe that were connected with the snake goddess. We
do not know why the Minoans worshipped snakes. However, it has been suggested that the Minoans
worshipped snakes for the following reasons: They may have symbolised the afterlife. This is
because they disappear into the ground at certain times of the day, only to reappear later on. They
may have symbolised rebirth or renewal. This is due to the fact that they shed their skin at certain
appears of the year. They may be associated with fertility. This is due to the fact that they ate rats
and mice which may have consumed the Minoan's food. Archaeologists have found a number of
artefacts depicting snakes. For example: They have found hollow snake tubes. Some historians, such
as Wide, believe that these tubes symbolised a Minoan god. However, other historians, such as
Marinatos, believe that the Minoans put flowers in them. The Snake Goddess figurines depict some
women holding snakes. Evans believes that theses figures are goddesses. However, it has also been
suggested that they are priestesses. The Boston Goddess also depicts a woman holding

Primates : Humans And Humans
Primates are considered to be the closest relative to humans and are often classified together under
the Hominidae family. It was thought that humans were the superior group because they were able
to make and use tools but it was discovered by Jane Goodall that Primates are able to make and use
tools as well. Within the subject of primatology, we will be looking the different techniques used
during primate toolmaking and some of the uses for the tools made by primates. We will also be
looking at three different research studies focusing on mandrills, chimpanzees and capuchins which
will give us a better understanding of how primates make tools. By studying this, we can learn about
our close ancestors and how they are able to create and use ... Show more content on
Helpwriting.net ...
The use of tools by chimpanzees increased a lot during the past few decades and the likely cause of
that was the growing number of habituated chimpanzee populations combined with a large number
of long–term committed projects that investigate chimpanzee populations in different parts of Africa
(Toth and Schick:2009:294). Chimpanzees would use tools for termite fishing with twigs or grass,
leaf sponges to scoop brains from a cranium or fruit from a husk and would use stone, wooden
hammers and anvils to crack open hard–shelled nuts. In terms of male or female chimpanzees,
females would use tools during arboreal feeding whereas males would use tools to help harvest
terrestrial resources. (Toth and Schick:2009:295).Capuchins are observed to have use sticks to club
a snake and shells to crack open oysters(Westergaard 1995:2). They have also spontaneously used
and modified sticks as probes and stones and bone fragments as cutting and nut cracking
implements(Westergaard 1995:2). Mandrills have been shown to use small wood splinters as tools.
(Pansini and de Ruiter: 2011)
In the review article called: The Oldowan: The Tool Making Of Early Hominids and Chimpanzees
Compared by Nicholas Toth and Kathy Schick, there was a study conducted to find out if modern
apes are able to make and use tools. The study was based off in relation to a pervious

Risk, Demography, and Technological Evolution in...
Mark Collard's lecture was about risk, demography, and technological evolution in non–industrial
populations and he discussed the evolution of tool use among a variety of groups of hunter–
gatherers and food–producing communities. Collard states that the number and complexity of tools
varies greatly among populations and he focuses on why this variation exists. He starts off by
discussing and analyzing toolkit variation in both hunter–gatherer and farming societies and then
moves on to discuss overall technological variation in these societies and the possible explanation
for it. He lists four hypotheses that help explain this variation in toolkits among groups. They are the
Diet hypothesis, the Risk hypothesis, the Mobility hypothesis, ... Show more content on
Helpwriting.net ...
He then moves on to food producers (farmers) instead of hunter–gatherers. He notes that population
size is a major driver in technological variation among food– producers and there is no evidence of
risk of resource failure in these larger groups. I think that the most interesting question posed by
Mark Collard is whether there is a difference between hunter–gatherers and food producers in
regards to toolkit variation. Not only is he interested in the difference between the two group types,
he uses multiple variables and hypotheses to measure and analyze these differences. If I was to do
this experiment, it would have never crossed my mind to compare groups of different composition
and social structure. I would have thought that humans are all capable of the same activities and that
global variation among toolkit complexity and richness was due mostly to environmental factors.
The most important thing I learned was how tool use evolved over time, leading to our species'
current use of advanced tools. Even though Collard did not speak about humans over a long period
of time or directly about human evolution, one can deduce that as our species evolved from foragers
to organized societies, our toolkit complexity and richness increased dramatically. Given the
information in

Improper Use Of Backboards
Every tool created has a proper and improper use. A tool, when used correctly, can assist the user in
successfully accomplishing a job or task. However, if that same tool applied incorrectly or over
used, it can result in undesired outcomes. In the realm of emergency medicine, the application of
backboards and cervical spine precautions has its benefits and its flaws. Since the implementation of
the backboard, it has been used for extrication, cardiopulmonary resuscitation, spinal or cervical
trauma, multi–system trauma, and so on. Although there are indications for the use of backboards,
many personnel either improperly apply or apply when there is no significant injury. This paper will
address reasons why backboards are over used, how ... Show more content on Helpwriting.net ...
This can't co–exist with all patients in C–Spine because the used of a backboard isn't implemented
without adverse affects. In a 1994 study, healthy volunteers ages 10–43 were placed on backboards
for only 30 minutes. This resulted in 100% of patients developing moderate to severe pain, with
29% developing pain over the following 48 hours (Bledsoe, 2013). This pain may come from not
padding in voids or improper backboard strap placement or tightness. Keep in mind that these
patients were healthy. If an injured or unhealthy individual was to be placed in the same situation,
their condition may be more severe. For example, elderly or patients complicated with diseases like
obesity, congestive heart failure, COPD, asthma, or pneumonia may suffer from being secured to a
backboard (Morrissey,

Summary Of Helena Maria ViramontesUnder The Feet Of Jesus
In the passage from "Under the Feet of Jesus", Helena Maria Viramontes utilizes elements such as
figurative language and selection of detail to document and analyze the development of Estrella's
character throughout the text. The perplexity and distress she feels in school is evident until she
matures by the end of the excerpt demonstrating her newly acquired potential and confidence. These
elements demonstrate how an impoverished immigrant like Estrella learns and realizes to understand
critical, essential aspects and use this to rise above her struggles and be up to par to the teacher's
expectations who deemed her unworthy. Her relationship with Perfecto Flores and his toolbox helps
to guide her to acknowledge the everlasting and infinite value of education and its significance.
Viramontes uses figurative language to compare Estrella's confused and frustrated expression when
she sees things that she doesn't understand or know what they are. She compares the tools and
obscure shaped objects from a toolbox to a foreign language that one does not understand to
emphasize the difficulty that Estrella faces when she comes into contact with these tools with a
regular person who comes into a language that is not native to their own. As the text progresses, she
meets Perfecto Flores who enlightens and educates her on the names and purposes of these tools
which proves to be a pivotal point for Estrella who feels as if she just developed her own "language"
or "alphabet". Viramontes

13-In-1 Research Paper: The Influence of Loyalty in Ship Breaker

Recommended

Recommended

More Related Content

More from Brenda Thomas

More from Brenda Thomas (20)

Recently uploaded

Recently uploaded (20)

13-In-1 Research Paper: The Influence of Loyalty in Ship Breaker