The document outlines minimum and recommended system requirements for installing Windows Server 2012, including requiring at least a 1GHz processor, 512MB of RAM, and 10GB of available disk space. It recommends a 2GHz or faster processor, 2GB or more of RAM, and at least 40GB of available disk space. A DVD-ROM drive, VGA or higher resolution monitor, keyboard and mouse are also listed as requirements.
DGR_Digital Advertising Strategies for a Cookieless World_Presentation.pdf
Component Requirement Processor and Memory Specs
1. Component
Requirement
Processor
• Minimum: 1GHz (x86 processor) or 1.4GHz (x64 processor) • Recommended: 2GHz or
faster Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itaniumbased Systems
Memory
• Minimum: 512MB RAM • Recommended: 2GB RAM or greater • Maximum (32-bit
systems): 4GB (Standard) or 64GB (Enterprise and Datacenter) • Maximum (64-bit
systems): 32GB (Standard) or 2TB (Enterprise, Datacenter and Itanium-based Systems)
Available Disk • Minimum: 10GB • Recommended: 40GB or greater Note: Computers with more than 16GB
Space
of RAM will require more disk space for paging, hibernation, and dump files
Drive
DVD-ROM drive
Display and
• Super VGA (800 x 600) or higher-resolution monitor • Keyboard • Microsoft Mouse or
Peripherals
compatible pointing device
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19. Finally, the desktop appears and that's it, you're logged on
and can begin working. You will be greeted by an assistant
for the initial server configuration, and after performing
some initial configuration tasks, you will be able to start
working.
20. Insert the Windows Server 2012 DVD, and once you get the following message
press Enter to boot from the setup
21. Wait for a while till the setup loads all necessary files (Depending on your machine,
it will take couple of minutes)
85. First of all check vault is showing or not in your outlook. You will see Vault like
highlighted area in below Picture.
86.
87. Note- Please store 50-100 mails in a day and wait for 1-2 days for move
to Vault.
88.
89.
90.
91.
92.
93.
94.
95. First of all you have to copy all three files in C:/Temp folder and then run Setup
batch file.
96.
97.
98.
99.
100.
101. Note- Before connecting please check Internet is working or not.
If internet is working then click on connect it will get connected automatically.
102.
103. After putting name and server URL click on Add Button your connection
will be saved.
104.
105. Step 1: Insert the Microsoft Office 2007 Enterprise CD. If the Setup Wizard does not automatically
begin, Go to CD/DVD Rom Drive and run Setup.Exe
Step 2: Enter the Product Key from the back of the CD jacket. Note: This is a unique
code. Please keep in a safe place!
Click Continue
106.
107. Note: Outlook 2003 will be uninstalled in either option. Outlook will be updated and your user
settings and mail will migrate to the new version.
If you click Upgrade, go on to Step 5.
If you click Customize, go on to Step 4a.