1. CURICULUM VITAE
YEOH KENG SEONG
PERSONAL PARTICULAR
SUMMARYOF EXPERIENCE
I have Six (6) years working experience for ONSHORE &
OFFSHORE ENGINEERING, PROCUREMENT,
COSTRUCTION and COMMISSIONING PROJECT.
ONSHORE & OFFSHORE :-Commissioning & Construction
Supervisor, Engineering, Hook-Up, Live Platform Modifications &
Testing and Commissioning experience on most of Electrical and
Instrumentation on various type of Oil & Gas Platform such as,
Production Platform, Riser Platform, Gas Compression Platform,
Integrated Oil Production. Experienced in accessing and fully
conversant in QA/QC requirements, Engineering, Safety, Planning
and Testing & Pre-commissioning Procedure and techniques with
the Oil and Gas Industry.
CONSTRUCTION & COMMISSIONING: - Installations in
Electrical, Mechanical and Pneumatic system equipment such as
Panels, HVAC equipment, HVAC piping, and etc. Testing and
Commissioning all the equipment after installations.
I am very dedicated and committed for all Jobs that I was handling,
planning and monitoring including Engineering, QA/QC, and
Construction and Fabrication activity until end of the projects.
SKILL & ADDITIONAL KNOWLEDGE
1. Able to operated Computer System such as Microsoft
Word, Excel, Project and Power Point.
2. Familiar with the PCSB, SHELL, EMEPMI Project
Specification.
3. 2D and 3D Autocad
4. Adobe PDF and Photoshop
5. MATLAB on Neural Fuzzy system
6. C programming
INTERPERSONAL SKILLS AND ATTITUDE
1. Fast learner
2. Able to work independently and under pressure.
3. Responsible and dedicated
4. Detail and accurate
5. Good communication skills
ADDRESS:
No 1, Jalan Lang Perut Putih 5,
Kepong Baru, 52100 Kuala Lumpur,
Malaysia
CONTACTS:
Mobile: +6019 6356288
EMAIL :
alexanderyks@yahoo.ocm
yeohkengseong@icloud.com
DOB: 19 February 1984
AGE: 31 yrs
MARITAL STATUS : Single
GENDER: Male
NATIONALITY: Malaysian
LANGUAGES:
English, Bahasa, Mandarine,
Cantonese
PASSPORT NO : A22242407
QUALIFICATIONS
Universiti Tenaga Nasional
(UNITEN), Selangor
Bachelor of Electrical & Electronic
Engineering (Hons)
Graduate : APRIL 2007
SKILL PROFILE
Project Management, Engineering
Design (Electrical) , Feed Study,
Construction/Installation/Commissio
ning Engineer, E&I Inspector.
OTHER EXPERIENCE
Testing and commissioning
mechanical equipment
CERTIFICATION
LPS – Loss Prevention System
BOSET – OPITO Approved
OSP – Offshore Safety Passport
OGSP – Oil and Gas Safety
Passport
2. DETAILED EXPERIENCE
1.Dynac (M) Sdn Bhd
Position : Project Engineer/Electrical Engineer
July 2009 till Present
Areas of responsibilities :
• Responsible as Project Engineer for all matter pertaining to project and site, including review
project specification, and establish execution work plan.
• Supervise, monitor and control overall progress for areas responsibility and provide problem
solving solution and decision for project related issues.
• Guide, train, and monitor project and site personal in work execution and all related issues to
ensure compliance and continual improvement to project/site requirement, quality, as well as
HSE regulation.
• Liaison with clients, consultant, contractors and authorities.
• Coordinate and maximize resources between engineering, drafting, and site to meet project
commitment.
• To manage and allocate manpower resources, and analyze work load, manpower loading and
work progress with Project Manager in order to meet schedule.
• Responsible as Commissioning Engineer to lead and carry out overall HVAC System Testing and
Commissioning including all HVAC equipment, HVAC Motor Control Center and PLC panel,
Air Cooled Split Unit System, as well as air and water balancing.
Additional responsibilities at site:
• Preparation of commissioning document and factory testing document.
• Trouble shooting of malfunction of HVAC system.
• To perform site survey for HVAC system such as main equipment, room pressurization for
LQ and CCR and related.
• Review and update for project drawing (red-line mark-up).
• Coordinate and Monitoring Electrical & Instrumentation Installation & Cable pulling during
fabrication Works.
• Inspections of receiving project materials.
• Monitor, Inspection and expedite contractor activity during installations works as per
specifications and requirement.
• Responsible to check and inspect all the installation for Cable Ladder / Tray, Earthing , Cable
pulling & Laying, Fabrication of Support, Equipment Skid Frame, Termination etc
accordance as per requirements.
• Rise up Fabrication Punchlist, NCR and Pre-Commissioning Punchlist during Fabrications
and Pre-com. activity.
3. Projects involved:
1. Project: Turkmenistan Block 1 Development Project
Description: Design, Supply, Installation, Testing and Commissioning of HVAC System for: -
19 nos. building.
Owner: Petronas Carigali (Turkmenistan) Sdn Bhd
Main Contractor: Malaysia Marine and Heavy Heavy (MMHE) Engineering Sdn.
Bhd, Technip Geoproduction (M) Sdn. Bhd.
2. Project: Kipper Tuna Turrum Project
Description: Design, Supply, Installation, Testing and Commissioning of HVAC System.
Owner: Esso Australia Pty Ltd
Main Contractor: Mc. Dermott Industries (Aust) Oty Ltd (JRMAP, Singapore)
3. Project: Yetagun Phase 4 Development Project
Description: Design, Supply, Installation, Testing and Commissioning of HVAC System.
Owner: Petronas Carigali Myanmar (Hong Kong) Limited
Main Contractor: Nippon Steel Engineering
4. Project: Turkmenistan Block 1 Development Project
Description: Design, Supply, Installation, Testing and Commissioning of HVAC System for: -
3 nos. building.
Owner: Petronas Carigali (Turkmenistan) Sdn Bhd
Main Contractor: Malaysia Marine and Heavy Heavy (MMHE) Engineering Sdn.
Bhd, Technip Geoproduction (M) Sdn. Bhd.
5. Project: Site Survey For Existing HVAC System At Tabu A Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
6. Project: Site Survey For Existing HVAC System At Tabu B Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
7. Project: Site Survey For Existing HVAC System At Raya A Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
8. Project: Site Survey For Existing HVAC System At Seligi F Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
9. Project: Site Survey For Existing HVAC System At Guntong B Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
10. Project: Site Survey For Existing HVAC System At Guntong C Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
4. 11. Project: Site Survey For Existing HVAC System At Palas A Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
12. Project: Site Survey For Existing HVAC System At Semangkok B Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
13. Project: Site Survey For Existing HVAC System At Seligi B Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
14. Project: Site Survey For Existing HVAC System At Seligi C Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
15. Project: Site Survey For Existing HVAC System At Guntong A Platform
Owner: Exxonmobil Exploration & Production (EMEPMI)
EPCC Contractor: Dynac Sdn Bhd
16. HVAC PROJECT FOR SUPPLY OF ENGINEERING, PROCUREMENT, ONSHORE
FABRICATION AND OFFSHORE HOOK-UP AND COMMISSIONING FOR
VENTILATION AIR CONDITIONING (HVAC) REJUVENATION PHASE 1, AT SELIGI F,
SELIGI G AND SEMANGKOK B PLATFORMS
Owner: Exxonmobil Exploration and Production Malaysia Inc.
EPCC Contractor: Dynac Sdn Bhd
17. NEW UPGRADING HVAC SYSTEM FOR PRODUCTION PLATFORM MODULE 5,
JERNEH – A PLATFORM
Owner: Exxonmobil Exploration and Production Malaysia Inc.
EPCC Contractor: Dynac Sdn Bhd
18. HVAC PROJECT FOR SUPPLY OF ENGINEERING, PROCUREMENT, ONSHORE
FABRICATION AND OFFSHORE HOOK-UP AND COMMISSIONING FOR
VENTILATION AIR CONDITIONING (HVAC) REJUVENATION PHASE 2 GUNTONG A
PLATFORM
Owner: Exxonmobil Exploration and Production Malaysia Inc.
EPCC Contractor: Dynac Sdn Bhd
19. Project: Terengganu Gas Terminal (TGAST)
Description: Design, Supply of HVAC System.
Owner: Petronas Carigali
20. Feed study of numerous of EMEPMI platforms (more than 15 platforms) and other client platform in
Malaysia such as SJKA, FPSO Kikeh etc.
21. Trouble shooting and maintenance of HVAC system of field wide EMEPMI platforms.
5. March 2007 to June 2009
ChungHwa Picture Tube (M) Sdn. Bhd.
Position: R & D Engineer
Responsibilities:
• Conduct research, design and development of new products.
• Liase with vendors on the development of new products and parts.
• Study, analyze and improve existing product in term of cost and quality issues.
• Involve in continuous project improvements on yield and processes.
• Monitor and collection of engineering data for analysis.
• Provide technical support and improvement of production flow.
Others Involvement: ISO 9001:2000 Internal Audit
Involved in QA internal audit unit, check and audit the quality management system and
documentation control flow of the production line
Courses attended:
Change Management Experimental Learning Program and Restriction of Hazardous Substances
(ROHs), Basic & Advance Microsoft Excel, IKNOWLEDGE Project Management, 7 QC Tools
Quality Improvement, Subconscious Mind for Greater results, Microsoft Excel Visual Basic
Application, Cost of Quality Management, ISO 9001:2000 Quality Management System,
2D/3D Autocad Application, learning of Poka Yoke Management.
3 April 2006 - 23 June 2006 (Industrial training)
Sunrise Berhad (Mont' Kiara)
Position: Mechanical & Electrical Supervisor
Responsibilities: Check and inspect M&E Services
JOB PREFERENCES
Expected Salary : RM 6,000.00
Willing To Travel : Yes
Willing To Relocate : Yes
Remark: I certainly hope that I will fit your requirement very well. As you are looking for a right person to
fill the position, I'm also looking for a right place to contribute my expertise. I believe that I will be
rewarded satisfactory if I do the right thing at the right place.
