Sridhar Mangu is a senior civil and structural engineer with over 25 years of experience in structural design, investigation, rehabilitation, project management, and construction management of oil and gas and commercial projects. He holds a Bachelor's degree in Civil Engineering from Osmania University in India. Currently he works as a senior civil engineer for Technip France in Abu Dhabi, where he is responsible for structural inspection, condition assessment, rehabilitation design, and construction oversight for the KAZ Gas Plant project in Iraq.
1. Page 1 of 7 PMC.1.1-22jul16
SRIDHAR MANGU Mob: +97150 9210603
mangu.sridhar@gmail.com Landline: +9712 6771260
____________________________________________________________________________
QUALIFICATION Bachelor of Engineering (CIVIL) from Osmania University,
Hyderabad, India. Graduated in 1984 with distinction.
SUMMARY Senior Civil & Structural Engineer with over 25 years experience in
Structural Investigation and Appraisal
Design of Structural Repairs/Rehabilitation and Modifications
Condition Surveys
Preparation of Technical Reports
PMC for O & G projects and commercial projects
Site Coordination
Site Inspection
Structural Design
Technical evaluation of tenders
Very good oral and written communication skills in English
EXPERIENCE
Mar.2013 – date Technip France – Abu Dhabi
Senior Civil Engineer
Project: KAZ Gas Plant, Basrah, Iraq – consists of Units -
Caustic/Merox, Hot Oil, NGL (2 trains), LPG (3 trains), Storage Tanks,
Pipe Racks, Sub-stations, Control Building, Utility Buildings,
Underground drainage for oily water.
Responsibilities (as Lead Civil Engineer):
Preparation of Work Packages and Observation Forms for Pre-
Inspection (visual)
Carrying out Pre-Inspection and Condition Assessment of existing
structures and foundations at site
Preparation of Pre-Inspection Reports and Scope of Work for
Detailed Inspection (intrusive)
Review and approval of Third Party Inspector’s (TPI) proposed
Detailed Inspection plan and Method Statement
Coordination and monitoring of Detailed Inspection at site by TPI
Preparation of Inspection Reports based on TPI Reports
Preparation of Scope Definition Reports (for Rehabilitation Works)
2. Page 2 of 7 PMC.1.1-22jul16
for all units based on the Inspection Reports, including estimation
of deliverables and man hours, and obtaining Client approval
Design of Rehabilitation Works in coordination with other
disciplines
Review of Sub-contractor fabrication drawings, material submittals
and method statements
Replying to technical queries from the Sub-contractor
Attending Technical Review Meetings with Client and Sub-
contractor
Attending Daily and Weekly Progress Review meetings at site with
Client
Technical evaluation of sub-contract tenders
Project: Zadco - Upper Zakum 750K EPC-1 Project P-7511 Sub-
sea Pipelines, Cables, Offshore Structures & Brownfield
Responsibilities:
Design of sub-sea and onshore precast concrete sleepers for
pipelines
Review of Sub-contractor’s technical documents, material
submittals, and shop drawings
Replying to technical queries from the Sub-contractor
Assisting Project Manager in raising Deviation Requests and
replying to technical queries from the Client
Attending Technical and Progress Review Meetings with Sub-
contractor and Client
Mar. 2010 – Feb.
2013
Tebodin Middle East Ltd., Abu Dhabi, U.A.E.
Senior Engineer – Civil & Structural
Responsibilities:
Review / design of FEED and detail design drawings and
documents for concrete and steel structures in Oil & Gas projects
Coordination with Clients, Contractors, and Project team
Projects - PMC
Habshan Flare Recovery Project, GASCO: modification of the
existing HGCE pipe rack to carry additional piping.
Habshan Acid Gas Flare Recovery Project, GASCO
Ruwais Sulphur Expansion (Phase-III) Project, GASCO
3. Page 3 of 7 PMC.1.1-22jul16
Projects - Detail Design
Truss-type floating roof for 72m diameter oil tank at ADMA-OPCO,
Das Island, for contractor Costain.
Structural steel support frames for pig launchers and receivers on
24”, 20”, and 12” dia pipelines at GASCO, Habshan, for EPC
contractor Babcock.
R.C. ring beam foundation for 2 water tanks 90m dia 20m high, Al
Ain Municipality, for EPC contractor Lindenberg.
Structural steel platforms and foundations for operation of Asab
Lean Gas pipelines, GASCO, for EPC contractor Dodsal.
Foundations for security fences and camera poles at Ruwais
Industrial Complex for EPC contractor Advanced Integrated
Systems.
Nov.2007 – Feb.2010 Parsons International Ltd., Abu Dhabi
Senior Structural Engineer (PMC)
Responsibilities:
Review of design calculations from consultants and contractors,
design and shop drawings for concrete and steel structures, and
piling
Review of method statements and material submittals for
conformance to codes, standards, and specifications
Technical advice at site to the construction team as and when
required
Attending project technical meetings with consultants and
contractors
Tender evaluation of prequalification bids by consultants and
contractors, and technical bids by consultants and contractors for
various sub-projects
Project:
Abu Dhabi Airport Expansion Program which mainly consists of
Mid-field Terminal Building, Air Traffic Control Tower, new runway
and taxiways, T3 Terminal as extension to existing Terminal, Multi-
storied Car Park, Warehouses, service roads.
4. Page 4 of 7 PMC.1.1-22jul16
Dec.1998 - Oct.2007 Ismail Khonji Associates, Consulting Engineers, Bahrain
Senior Structural Engineer
Responsibilities:
Structural Investigation / Condition Survey of existing buildings to
assess the extent and degree of deterioration or damage and
recommend the most suitable repair method
Design of structural repairs and modifications to existing buildings
Structural Appraisals for extension / addition of floor, alteration
and refurbishment of existing buildings
Carrying out structural appraisals and estimating the cost of repair
works for assessment of claims received by Loss Adjusters
Preparation of Reports for structural appraisals / investigation and
feasibility studies
Analysis and design of commercial structures using structural
software programs
Design of thrust blocks and valve chambers for pipelines
Coordinating structural design with the architect and MEP
engineers to ensure Client’s requirements are met with
Site coordination for industrial, commercial, and structural
rehabilitation projects
Review of contractors’ shop drawings, rebar detailing and method
statements for RC and civil works
Design back-up to the site team to provide solutions for
construction problems
Preparation of specifications and estimates for structural work
Key projects:
Structural Repairs and Modifications
Gulf Hotel (5-star) - Structural Repairs to South Wing which is a
30-year old G + 5 storied R.C. building.
Gulf Hotel - Refurbishment of South Wing - involved structural
modifications and fixing of special brackets to support external
cladding and aluminium glazing frames. A totally new look was
given to this 30-year old block.
Bahrain International Airport – Removal of part floor and
modifications to strengthen the existing structural steel floor
beams of Arrival and Departure Levels to install escalators.
British Club – Windsor Room Extension - involved jacking up to a
pre-determined load and cutting-off the lower part (ground floor to
5. Page 5 of 7 PMC.1.1-22jul16
first floor) of an existing structural steel column and supporting the
upper part on an adjacent new R.C.structure.
Oasis Villas – property owned by M/s E.K.Kanoo, agents for
Toyota – extensive structural modifications to 11 no. R.C framed
buildings of up to 3 stories.
Gulf Industrial Investment Co.(GIIC) – Repairs to Jetty (approx.
300 m long) – involved design of the remedial methods for the
underside of the concrete jetty where cracks appeared and
concrete spalled in isolated areas.
Gulf Hotel High Level Walkway – strengthening of footing for
columns using mini piles to prevent further settlement
Analysis and Design
King Hamad General Hospital – a 312-bed hospital consisting of
3 blocks of 4-storeys each, R.C.structure with 5 metre high
landscaped bunds on all sides against retaining walls.
During construction posted as Site Structural Engineer to
provide technical assistance to the Project Manager (Australian
Hospital Design Group). Reviewed material submittals, shop
drawings and method statements for structural and civil works;
resolved construction problems; answered contractor’s RFIs
Expansion of St. Christopher’s School - one new 3-storey block
and addition of one storey each to two existing 2-storey blocks.
New Equestrian Club, Janadriyah, Saudi Arabia – Carried out
the design of Grand Stand, ancillary structures, retaining walls,
and roads
Hidd and Seef Pumping Stations for Ministry of Electricity and
Water – Design of Basement Walls and Column foundations,
Pump foundations, Chambers and Thrust Blocks carrying
pipelines of up to 1400 mm diameter for 16 bar test pressure;
Review of Sea Water Intake Structure design.
Hilton Hotel - Structural Steel Platform for 2 no. chillers of 10
tonnes each.
Bahrain Petroleum Company (Bapco) - Chambers and Thrust
Blocks along Zallaq pipeline 800 mm diameter for 16 bar test
pressure
Mabani W.L.L., Abu Dhabi - Line Anchors (type of thrust blocks)
at vertical and horizontal 90, 45, 22.5 and 11.25 degree bends in
water pipeline for 10 bar test pressure
6. Page 6 of 7 PMC.1.1-22jul16
Apr.1996 - Apr.1998 Hashim & Neh Sdn. Bhd., Consulting Engineers, Malaysia
Structural Engineer
Responsibilities:
Structural design for multi-storied commercial buildings
Co-ordinating with other project consultants and contractors
Site visits to inspect work and resolve site problems
Review and approval of rebar detailing
Analysis and design to BS codes, using software STAAD III,
PROKON, WALLAP and SAFE
Attended in-house courses on Contract Management & Contract
Administration
Dec.1989 - Apr.1996 Tata Consulting Engineers, India
Engineer
Responsible for the following in Industrial and Nuclear Power Projects -
Static and Dynamic analysis of RC and steel structures using
software programs such as SAP IV and STAAD III
Design and detailing of RC and Steel structures to IS and ACI
codes
Design of plant roads and surface drainage
Design and detailing of earthquake resistant structures to IS codes
Review and approval of rebar detailing
Co-ordination with Clients and other Consultants
Feb.1988 - Dec.1989 DESEIN (New Delhi) Pvt. Ltd., India
Design Engineer
Carried out Analysis and Design of various structures including
Main Plant Building in Thermal Power Projects, using computer
aided analysis and design to IS and ACI codes
Feb.1985 - Jan.1988 S.S. Engineering Co., and Gannon Dunkerley & Co.
Senior Civil Engineer; Site Engineer
Executed construction of medium rise (8 to 10-storied) commercial
buildings and industrial buildings.
CERTIFICATIONS
Attended a short course on FIDIC contracts arranged by Parsons
International Ltd., Abu Dhabi
7. Page 7 of 7 PMC.1.1-22jul16
OTHER INTERESTS
Self development – improving communication skills – completed
an accredited course in Neuro-Linguistic Programming
Alternative / Complementary Medicine
PERSONAL
DETAILS
Date of Birth: 12th
March 1963
Nationality: Indian
Marital Status: Married
Driving License: U.A.E. driving license valid until 2018
REFERENCES
1) Kishore Balina,
Design Manager,
Technip France Abu Dhabi
Mobile no. 050-3181236
2) Subbarao Somalanka,
Senior Civil & Structural Engineer,
Tebodin Abu Dhabi
Mobile no. 050-6205476