CV LOUIS LAVERNE

Continued…
LOUIS LAVERNE
224 St Nicholas Drive  Lafayette Louisiana ljlaverne@yahoo.com
Instrument Superintendent
I would like to apply with your companyfor the position ofan InstrumentSuperintendent / Engineer / Sr. Supervisor /
Suitable job opening where I can use my skills and previous oilfield experience to help you obtain your company's
mission. The enclosed resume will furnish you with complete information concerning my background and capabilities.
I am seeking an international position, preferably on a rotating schedule. I have 30 plus years of oilfield experience on
Instrumentation field atnumerous gas and oil production facilities. I am an innovative thinker with a demonstrated ability
to improve job quality and decrease down time. I am very adaptable to changing work schedules and have a proven
ability to quickly train on different facilities. In addition, I have excellent planning and organizational skills as well as
excellent rapport within the managements and co-workers. You will find I work well under pressure, am an effective
problem solver and a conscientious and reliable worker.Sr.InstrumentSuperintendent:Involved in engineering activities
covering of site survey, as-building documents and drawings. Verification of documents and drawings and also
developing field sketches for field instrument supports, new field wiring diagrams, loop diagrams, cable routings, plot
plans and instrumentlocation drawings.Documentation for removal and installation ofinstruments and related materials,
carried out modification lay outs for Instrument Hook-ups, supervising of daily instrument activities such as calibration,
installation, loop checking, logic & sequence checking, taking active part in commissioning and plant start up, as -built
documentation,preventive and corrective maintenance ofdailyactivities after successfully plant start-up. Vendor related
documents and inspection of materials quality, assigning daily jobs to sub-contractor and inspection of daily activities,
documentation,and modification ofpre-builtdrawings issued for construction,commissioning activities. Experience with
air-cooled C3/MR design, 4.1mtpa LNG and 0.5mtpa LPG, GE-7 gas turbine drives with 10MW starter / helpers, an
extended end flash system, parallel APCI cryogenic heat exchangers, higher liquefaction pressure, extension of LPG
jetty for LNG loading, additional GE-6s for power generation and extension of LPG chilling unit (U-3700).
Key Skills
* Commissioning & Start-up & InstrumentSuperintendentfor Plant Maintenance and Offshore Platforms.
* Construction Management
* Engineering & Design
* DCS and ESD logic testing
* Fire & gas system testing
* Loop testing and tuning
* Calibration & Maintenance
* PLC programming
* Commissioning Procedure development
* Operations support
* Factory acceptance testing (FAT)
* Managementof design changes
My experiences managing over 200 E&I Technicians on multiple projects with L.N.G. Fortune five hundred
companies, pertaining to Managing Loop Folder Construction and Plant Maintenance as a Instrument Superintendent,
My focus for the last20 years has been primarilylocated in the Middle East, with experience in different regions such as,
13 Trains Hassi Berkine & Oran. Algeria 2 Trains L.N.G. Project, Coastal El Paso Refinery 1 Trains, Aruba L.N.G,
Crude Distillation,Hess Oil Refinery, St.Croix U.S.V.I. for 2 Trains L.N.G Crude Distillation,Texaco Refinery, Panama for
Crude Distillation, Amoco Texas City 3 Trains L.N.G. DD. Units, Stuart Steven Platform Maintenance Gulf of
Mexico, Marathon Oil CompanyEquatorial Guinea 9 Trains L.N.G I have demonstrated proficiencyin the construction,
start-up,and commissioning of a variety of Power Plants, Petrochemical Units, Petroleum Facilities, Offshore Platforms
and L.N.G. Plants.Over 30 years of experience,Testing & Commissioning to Transmission & Distribution Power Sectors
and Instrumentation to D.C.S. Systems and P.L.C. Controllers.Ihave extensive old fashion work ethic and experience in
the E&I, I&C and quality analysis.I would like to obtain a position in management, supervision, or any position that I can
contribute my expertise to a growth oriented company. I have demonstrated proficiency in the construction,
maintenance, pre-check, and start-up of a variety of Petrochemical units, Burner Management System, Offshore
Platforms and Petroleum facilities.My expertise also includes setting configurations, fine tuning control loop and critical
alarm systems, loading parameters, trouble-shooting APM, UCN, FTA, and PLC components associated with the
Honeywell-2000-3000,Foxboro-100-200-I/AIntelligence,Fisher- Provox ,Bailey D.C.S. system.The calibration of control
valves, smart-transmitter, analog, digital, pneumatic, electromagnetic, sonic-signal transducers and Emergency
Shutdown Devices for the MCC switch gears, A/C or D/C control relay ladder logic to local control panel, PLC or DCS
system.

Professional Experience
* 30 Years of experience.
* Q/A, Q/C-Inspector.
* Documentation Control.
* Trouble-shooting ofelectrical & instrumentcontrol system including ladder logic,and logic diagrams.
* Switchgear/MCC maintenance of motor starters,variable speed drives,Including,Acrison,Woodward,K-Tron, and
Toshiba.
* Trouble-shooting and programming ofseveral of PLC systems including Modican,Allen Bradley, Texas Instrument,and
G.E.
* Software experience;P.I.D control, pointand alarm parameter changes,universal Station restarts,load & save of
PM/NIM and database.
* Hardware Experience;Trouble-shooting from the FTA, MUX, DISCRETE, HPM, NIM, UCN A/B Data highway.
* Start-up & Commissioning Engineer/Manager.
Simple & Combine cycle gas turbine power plants with SCR &HRSG, GE TM-2500, GM TM- 6000, Pratt & Whitney FT8
twin packs,GE Frame 7, including S.C.R.logic functional and tuning, Toshiba steam turbine and Westinghouse Ovation for
DCS, Mark V gas turbine controls,Westinghouse 900 MW steam turbine,Allen Bradley PLC 5 controls.
* Commissioning Engineer (Iraq)
Facilitate all disciplines involving 35 one MEG. GENERATORS in IRAQ. This included site preparation,delivery,
commissioning and start-up is including maintenance procedures.
* Commissioning Engineer (Iraq) Balad,Taji, and Spechier
Programming Multifunction Protection and Switchgear Control Unit ABB RFX, ABB Safeplus Model REF542 for Prime
Power Plants, Configuration of Function block has a specific channel number for serial communication parameters and
events Protection Coordination and Relay Setting. * Oversee all sales and business development functions, including new
productrollouts,key accountmanagement,customer relationship development, contract negotiations, and order fulfillment.
Hold P&L and budget responsibilities. Provide cross -functional team training, coaching, and mentoring. Direct network of
district sales managers and marketing associates located throughout the U.S and Middle Eas t. Design, implement, and
adjustvarious sales plans and programs for data storage products,with a focus on building two-tier distribution channel and
fostering demand in the Fortune 500 arena.
* The team leader to analyze preventive maintenance and troubleshooting activities, and fault finding of various process
instruments. Also safe and efficient execution of preventive maintenance (PM) schedules, Maintenance Policy. Schedule
PMs accordingly. Optimize use of IMMPOWER system with data entry, failure reporting. Deal with the Maintenance Policy
Schedule to keep it up a good job planning, at the same time observing the back log and always improve the key
performance. Propose and follow up plant improvement requests (PIR),Plant Change Requests (PCR)
· Interface with, and provide technical guidance for the activities of consultant engineering contractors as required,
· Deal with the operation and maintenance staff in analyzing root cause failure of plant equipment (RCA).
EDUCATION & TRAINING
Petroleum Engineer - 1979 – 1983 USL- Lafayette Louisiana, USA (3 Years)
1978- 1989 Fisher Control System. Process Control Applications and Management Skills
Louis Laverne
ljlaverne@yahoo.com

3 | P a g e
Page 3 of 7
Nationality- U.S.A
D.O.B - 3-16-61
After reviewing your web page, I came away from it with a strong vision of how I mightbe a part of your team.My skills and
background dovetail closelywith your company's growing need for experienced personnel,and I believe I possess the talent,
commitment,and energyyou are looking for in prospective employee,in a business contractor a personal contract.Keep me in mind
as your plans to add staff takes shape,It's clear that your Corporation is a vital, growing organization,and I know that wo rking there
would be a rewarding experience.Your companyhas an outstanding reputation as a global energycorporation,and I would welcome
the chance to interview for a specific position atyour firm.In the meantime,I hope that we can do some business in the nea r future,
hope to hear from you again, -- perhaps soon.
Qualifications;
I have demonstrated proficiencyin the Plant Maintenance,construction,start-up,and commissioning ofa variety of Petrochemical
units,Petroleum facilities,Offshore Platforms and L.N.G. Plants.My expertise also includes setting configurations,fine tuning control
loops and loading parameters into the D.C.S systems.Trouble-Shooting H.P.M, U.C.N, F.T.A and P.L.C components associated with
the Honeywell-2000&3000 Gus,Foxboro 100,200,I/A Intelligence,Fisher Provox, Bailey INFO 90 and other D.C.S system.The
calibration ofcontrol valves, smart-transmitter using the S.S.T 3000 and the Hart 275, analog,digital,pneumatic,electromagnetic,
sonic-signal transducers and EmergencyShutdown Devices for M.C.C. Directed all maintenance,repairs,procurements,site
Training,software upgrades and documentation ofequipmentassociated with Instrumentation for the past30 years. Problem sol ving
and enhancementprojects for process automation issues.
Qualified in the following areas:Classroom Instruction… Planning… Work Package reviews… System Walk downs… Procedure
Writing/Revisions… Start-up… Lead Technician Qualified… Process Instrumentation Maintenance … Calibration … Surveillance’s …
Troubleshooting … System Upgrades … Accurate Paperwork … Computers … Wiring Changes/Verifications … P&ID’s … Parts
Inventory … M&TE Tracking System Set-up.
Computer Skills;
Skillful with Microsoft Office (Word, Excel, PowerPoint,Project, Access & Outlook) and Lotus Notes.
Work History;
2010-2012 Kellogg Brown & Root (KBR
2009-2010 Kellogg Brown & Root (KBR) Saudi Kayan Petrochemical ComplexSaudi Kayan Olefins ProjectAl Jubail,Kingdom of
Saudi Arabia Demobilization Date July 3 2010 General Instrumentation Superintendent
Delivery of documentation to the Subcontractors,Ensures through the SpecialistSupervisor the assessmentofthe progress and its
accounting submitted by the Subcontractor.Prepares the work progress reportfor the approval by the Construction Management.
Ensures thatthe tests,controls and inspections are carried outby the Subcontractor according to the schedule and Specifica tion
requirements. Ensures thatSubcontractor activities are carried out according the approved Quality Plan and are in compliance with
the required HSE standards.Ensures thatall the instrumentation installation is correctlyinstalled for the process service. Supervises
all checks required to complete the works,loop checks, Function & Commission check including all necessarydocumentation
preparation (necessaryfor final As-Built). Takes part to the preparation and updating ofthe construction schedule.Check the fitness
for purpose ofSubcontractors equipmentand personnel,promoting anyaction For achieving the Project goals. Assists the
Construction Managementin resolving disputes and claims with the Subcontractors.
Aroop Pradhan Rachid Bessalah
Project Manager – Engineering Control Systems Completion Manager
Saudi Kayan Olefins Project Saudi Kayan-Olefins Project
KBR, Hydrocarbons Tel. (bravo): 0515229033
Al Jubail,Kingdom ofSaudi Arabia Mobile : 0551639207

4 | P a g e
Page 4 of 7
Office : +966-3359-0100 Ext. 124 E-mail: bessalahr@saudikayan.sabic.com
Cell : +966-515-017-219
E-mail : Aroop.Pradhan@kbr.com
2002-2009 Alaa Industrial EquipmentFactory Iraq.
* Start-up & Commissioning Engineer/Manager.
For the past6 years in Iraq I was the Iraq as CEO of RML Services & Branch Manager for Alaa Industrial EquipmentFactory,
executing projects for the Iraq and USA governmentdeveloping a standard protocol for the Oil Sector mostlyrelated to offsho re and
onshore upgrades to their Instrumentation and Flow Meters validation.
Simple & Combine cycle gas turbine power plants with SCR &HRSG, GE TM-2500, GM TM- 6000, Pratt & Whitney FT8 twin packs,
GE Frame 7, including S.C.R.logic functional and tuning,Toshiba steam turbine and Westinghouse Ovation for DCS, Mark V gas
turbine controls,Westinghouse 900 MW steam turbine,Allen Bradley PLC 5 controls.Commissioning Engineer (Iraq)
Facilitate all disciplines involving 35 one MEG. GENERATORS in IRAQ. This included site preparation,delivery,commissioning and
start-up is including maintenance procedures.
* Commissioning Engineer (Iraq) Balad,Taji, and Spechier
Programming Multifunction Protection and Switchgear Control UnitABB RFX, ABB Safeplus Model REF542 for Prime Power Plants,
Configuration of Function block has a specific channel number for serial communication parameters and events Protection
Coordination and RelaySetting. * Oversee all sales and business developmentfunctions,including new product rollouts, key account
management,customer relationship development, contract negotiations, and order fulfillment. and P&L and budget responsibilities.
Provide cross-functional team training,coaching,and mentoring.Directnetwork of districtsales managers and marketing associates
located throughout the U.S and Middle East. Design, implement, and adjust various sales plans and programs for data storage
products, with a focus on building two-tier distribution channel and fostering demand in the Fortune 500 arena.
2001-2002 Advanced Instrumentation & Electrical.
Brown & RootProject, Hassi Berkine.Algeria.
InstrumentSuperintendentfor L.N.G. Project.
Duties:Include preparation ofloop packages and job packs,Setting up of Instrumentand pre-cals ofall instrumentation then pre-
commissioning and commissioning ofEightgas turbines and compressors.Nouvo Pignone Compressors tied in to existing plantand
control system.Control System ABB/Bailey INFI 90 DCS. Compressor control system Dresser Rand Di-Tronics 4 and Norfass Fire
and Augusta Gas system.Compressor shutdown system Rotork ESD.
2000-2001 Star Con Engineering Coastal El Paso Refinery,Aruba for Crude Distillation.
InstrumentSuperintendentfor Plant Maintenance.
Duties:Shift InstrumentSuperintendentto delegate daily work orders to Venezuela national work force in the oil refineries.Instrument
Superintendent for Plant Maintenance including project commissioning coordinator for Plant Maintenance to the following systems,
Honeywell - TDC-2000 & 3000, Fisher Instrument, Rosemount and Allen Bradley P.L.C. 5. Utility system for Gas, Oil and Naphtha
Power Generation Turbine buy G. E, Mitsubishi. The team leader to analyze preventive maintenance and troubleshooting activities,
and fault finding of various process instruments. Also safe and efficient execution of preventive maintenance (PM) schedules,
Maintenance Policy. Schedule PMs accordingly. Optimize use of IMMPOWER system with data entry, failure reporting. Deal with the
Maintenance Policy Schedule to keep it up a good job planning,atthe same time observing the back log and always improve the key
performance. Propose and follow up plant improvement requests (PIR),Plant Change Requests (PCR)
· Interface with, and provide technical guidance for the activities of consultant engineering contractors as required,
· Deal with the operation and maintenance staff in analyzing root cause failure of plant equipment (RCA).
1997-2000 Jacobs Engineering Hess Oil Refineryand St.Croix U.S.V.I. for Crude Distillation.
Duties:My team was responsible for complete integration ofpower plantprocess control systems including DCS,PLC and field
instrumentation (Water Systems,Fly Ash, Sorbent Injection,Flue Gas De-Sulfurization,FCC, Crude Units,Vacuum, Plat former Units,
Boiler Burner, Soot Blower,Air heater, Material Handling in this case coal).Utilized in depth understanding ofFoxboro DCS Invensys,
RSControl Logix, RSCompactLogix,Micro Logix, SLC500,PLC5, Johnson Metasys,Johnson DX series controllers,RSLogix500 and
5000,RSNetWorx, RSLinx, GE Cimplicity, GE9070 and 9040 series processors,Foundation Fieldbus, Profibus and Modbus to
successfullystartup systems ShiftInstrumentSuperintendentto delegate dailywork orders for plantMaintenance, to the foll owing
systems,Honeywell - TDC- 3000,Honeywell U,D.C 6000,58 P, SmartTransmitter,Foxboro Spec 100 & 200, 43 AP, 13A ,Fisher
SmartInstrument,Valve Tek, and Allen Bradley P.L.C. The team leader to analyze preventive maintenance and troubleshooting
activities, and fault finding of various process instruments.Also safe and efficientexecution of preventive m aintenance (PM)
schedules,Maintenance Policy. Schedule PMs accordingly. Optimize use of IMMPOWER system with data entry, failure reporting.
Deal with the Maintenance Policy Schedule to keep it up a good job planning,atthe same time observing the back lo g and always
improve the key performance.Propose and follow up plantimprovementrequests (PIR),PlantChange Requests (PCR)

5 | P a g e
Page 5 of 7
· Interface with, and provide technical guidance for the activities of consultantengineering contractors as required,
· Deal with the operation and maintenance staffin analyzing root cause failure ofplant equipment(RCA).
1997-1997 Baker Energy
Mobil Oil Co. S.M.I 243 for Offshore Platform
InstrumentSuperintendentPlatform Maintenance.
Duties:Maintenance of onshore wellhead surface and subsurface safetysystem.In depth knowledge ofwellhead and Xmas trees.
Good understanding ofBaker CAC and Otis wellhead control panel and the operation of surface and subsurface controlled valves .
Initiate preventive maintenance according to setprocedure.Capable ofperforming week end duties.Operate wellhead as per
operation departmentrequired.Generate dailyreport. Overhaul control valves, pneumatic and hydraulic actuators.
1996-1997 H.B.Zachary
Union Carbide,Texas City, TX for Chemical Plant.
Duties:Directed a global team of more than 20 professionals in engineering managementsupporting major corporate expansions
including three $2B manufacturing facilities.My teams were deployed in multiple global projects simultaneouslyand were responsible
for managementofEPIC activity (Engineering,Procurement,Installation and Commissioning) for entire industrial control systems on
state of the art semiconductor facilities...Under my direction,my teams successfullycompleted installation & Maintenance
commissioning projects.Also safe and efficientexecution of preventive maintenance (PM) schedules,Maintenance Policy.Schedule
PMs accordingly. Optimize use of IMMPOWER system with data entry, failure reporting.Deal with the Maintenance Policy Schedule
to keep it up a good job planning,at the same time observing the back log and always improve the key performance.Propose an d
follow up plantimprovementrequests (PIR),PlantChange Requests (PCR)
1996-1996 Litwen Engineering
Coastal El Paso Refinery, Aruba for Crude Distillation.
InstrumentSuperintendentfor Coker Unit.
Duties:Construction ofa new Coker units,include preparation ofloop packages and job packs,Setting up of Instrumentand p re-cals
of all instrumentation then pre- commissioning and commissioning to gas turbines and compressors.Control System Honeywell -
3000 DCS. Fisher level 2390,Fisher control valve, K-tron x-ray Level. Compressor control system Woodworth governor.Burner
Managementsystem control Allan Brady slick 5. Also safe and efficient execution of preventive maintenance (PM) schedules,
Maintenance Policy. Schedule PMs accordingly.Optimize use of IMMPOWER system with data entry, failure reporting.Deal with the
Maintenance Policy Schedule to keep it up a good job planning,atthe same time observing the back log and always improve the key
performance.Propose and follow up plantimprovementrequests (PIR),PlantChange Requests (PCR)
1995-1996 M.W. Kellogg Engineering
Bethouia,Algeria
InstrumentSuperintendentfor L.N.G. Project.
Duties:Also safe and efficientexecution of preventive maintenance (PM) schedules,Maintenance Policy.Schedule PMs accordingly.
Optimize use of IMMPOWER system with data entry, failure reporting.Deal with the Maintenance Policy Schedule to keep it up a
good job planning,at the same time observing the back log and always improve the key performance.Propose and follow up plan t
improvementrequests (PIR),PlantChange Requests (PCR) · Interface with, and provide technical guidance for the activities of
consultantengineering contractors as required,
· Deal with the operation and maintenance staffin analyzing root cause failure ofplant equipment(RCA). Hot cut over to new D.C.S
system,include preparation ofloop packages and job packs,Commissioning of10 gas turbines and compressors.Compressors tied
in to existing plantand control system.Control System Honeywell - 3000 DCS. Fisher valves with Taylor transmitter,Ashcroft
switches.TrIcones Fire and Gas P.L.C.systems.
1995-1995 Litwen Engineering
Texaco Refinery, Panama for Crude Distillation.
Duties:Hot cut over to new D.C.S system,include preparation ofloop packages and job packs,Pre-cals ofall instrumentation then
commissioning ofplantand control systems.Control System Honeywell - 3000 DCS, Honeywell smarttransmitter and Valtex valves
and Fisher Et, Ed valve, and 249 level transmitters.

6 | P a g e
Page 6 of 7
1994-1995 Bay Control
Enron Refinery, Houston,TX Chemical Plant.
Duties:P.I.D. elevation and location up-grade in the field that was sentfor Auto Cad, after plantexplosion.Control System upgrade to
a Foxboro I/A DCS, Smart Foxboro transmitter and Fisher valves and Com pressor control station. Also safe and efficient execution of
preventive maintenance (PM) schedules,Maintenance Policy. Schedule PMs accordingly. Optimize use of IMMPOWER system with
data entry, failure reporting.Deal with the Maintenance Policy Schedule to keep it up a good job planning,atthe same time observing
the back log and always improve the key performance.Propose and follow up plantimprovementrequests (PIR),PlantChange
Requests (PCR)
1993-1994 H.B.Zachary
Bayer, Baytown, TX.
InstrumentSuperintendentfor Plant Maintenance Makrolon polycarbonate Plant.
Duties:Plantmaintenance per dailyrequirementofproblem instrumentation.Controls Fisher PROVOX D.C.S, with Rosemountand
Honeywell transmitters.Allen Bradley P.L.C. 5 controls for conveyor system .
1992-1993 Brown & Root
Amoco Refinery, Texas City, TX for Crude Distillation.
InstrumentSupervisor for Plant Maintenance.
Duties:Directly responsible for overseeing all aspects ofPlantMaintenance Instrumenttesting,from field mounted transduce rs,to
DCS Process & PLC S/D systems,utilizing Supervisorypersonnel and field operatives.Pre-Commissioning duties include comms link
reliability,pre-installation Calibration,pro-installation loop sales,loop control action testing,and the associated documentation
procurementfor handover to the clienton Turnkey Projectcompletion.Control system Foxboro I/A, Honeywell - 3000, Fisher
products,Nouvo Pignone compressor,Bailey,Yokogawa and a variety of variable speeds. Also safe and efficientexecution of
preventive maintenance (PM) schedules,Maintenance Policy. Schedule PMs accordingly. Optimize use of IMMPOWER system with
data entry, failure reporting.Deal with the Maintenance Policy Schedule to keep it up a good job planning,atthe same time observing
the back log and always improve the key performance.Propose and follow up plantimprovementrequests (PIR),PlantChange
Requests (PCR)
1991-1992 InstrumentControl System
Coastal El Paso Refinery, Aruba for Crude Distillation.
InstrumentSuperintendentfor PlantMaintenance.
Duties:P.I.D. elevation and location up-grade in the field that was sentfor Auto Cad after plant was shutdown for Five years Control
System upgrade to a Honeywell DCS, smartHoneywell transmitter and Fisher valves and Compressor control station. Also safe and
efficient execution of preventive maintenance (PM) schedules,Maintenance Policy.Schedule PMs accordingly. Optimize use of
IMMPOWER system with data entry, failure reporting.Deal with the Maintenance Policy Schedule to keep it up a good job planni ng,
at the same time observing the back log and always improve the key performance.Propose and follow up plantimprovementrequests
(PIR),Plant Change Requests (PCR)
· Interface with, and provide technical guidance for the activities of consultantengineering contractors as req uired,
1989-1990 Crossland Instrument
Hess Oil Refineries,St.Croix U.S.V.I. for Crude Distillation.
Duties:InstrumentTechnician to work on daily work orders in oil refineries.Maintenance to the following systems,Honeywell - TDC-
3000,Honeywell U,D.C 2000,58 P, SmartTransmitter,Foxboro Spec 100 & 200, 43 AP, 13A Fisher SmartInstrument,Valve Tek,
Agar probe and Allen Bradley P.L.C. Also safe and efficient execution of preventive maintenance (PM) schedules,Maintenance
Policy. Schedule PMs accordingly. Optimize use of IMMPOWER system with data entry, failure reporting.Deal with the Maintenan ce
Policy Schedule to keep it up a good job planning,atthe same time observing the back log and always improve the key perform ance.
Propose and follow up plant improvementrequests (PIR),PlantChange Requests (PCR)

7 | P a g e
Page 7 of 7
1979-1989 Fisher Control/RosemountCompanyLafayette, Louisiana
InstrumentManager.
Duties:Service of all products associated with Fisher Control System ,Measurement& Analytical, Valves, Regulators, and Final
Control Elements,Systems,Controllers, and Software.
Unit Qualifications Listed Below:
Gas Plant/Refinery Units Include:Utility System:
Cooling Towers 2 Stage Ion- Exchange Demineralizers
Crude Units Boiler Feed Water Treatment
Diesel,Kerosene Treaters High Press Steam Generators/Heat
Fluidized Catalytic Cracker (F.C.C.U) High Press Steam Generators/Heat
Gas Plants:GOSP, LPG Recovery
Gas and Oil Separation (Crude Oil, Gas) High Pressure Steam Boiler
Gas Pipelines and Compressor Stations High Pressure Turbines
Gas Turbine operations Nitrogen Generation System
Gasifiers (Coke Synthesis Gas) Reverse Osmosis Demineralizers
Hydrofluoric (H.F) Acid Alky Vacuum System
LPG/LNG Fractionation & Treating
LSR/Naphtha Strippers Manufacturing Processes Include:
Merox Units BaghouseSeparators
Naphtha Hydrotreater Belt Conveyer System Load - Cell Belt
Naphtha Reformer Electrostatic Participatators
Oil & Gas Fired Heaters Cyclone Separators
Sour Water Strippers Weighing System
TEG Units
Turbo Expander
Vacuum Units
Chemical Plant Units Include:Acid/Caustic/Chemical/Handling/Storage:
Absorption Tower/Contactors/Purifiers Amine ( DEA )
Acid Centrifuges Ammonia
Acid Reformer Caustic
Amine Sour Gas Treater Chlorine
Chillers-Refrigeration Units Cholorosuphonic Acid
Distillation Purifiers Hydrochloric Acid
Gas Reforming Hydrofluoric Acid
Herbacides LPG/LNG
Hydrogen Generation & Purification Oxygen
Pesticides Solvents
Selexol H2S/ CO2 Treating- Acid Gas Sulfuric Acid
Experienced Trainer:
Basic Distillation
Basic Operations
Boiler Operations
DCS & PLC Control System, PlantOperation & Maintenance and OJT Trainer for Operation Units

CV LOUIS LAVERNE

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to CV LOUIS LAVERNE

Similar to CV LOUIS LAVERNE (20)

CV LOUIS LAVERNE