2. Members
011132065 – Mohammad Shahriar Reza
011142016 – Rakib Hasan Suvo
011145021 – Samrin Ahmed Riya
011142032 – Sanzida Akter
011142065 – Antara Anika Reza
011142151 – Roushanara Pervin
3. What is Arduino?
An open source.
Prototyping platform.
Easy to use hardware and software.
Works according to the instructions to the microcontroller to the board.
4. Why Arduino?
Inexpensive.
Cross-platform.
Simple, clear programming environment.
Open source – extensible software and hardware.
We are using
Arduino Uno R3
5. Arduino automated Parking Lot System
Microcontroller based Parking system.
Keeps track of the number of cars parked (09 being the max number).
Shows the number of slots unoccupied.
Controls the gate-arm by itself.
6. Project Objectives
To design and build up a prototype of an automated car park system.
To learn how to control the prototype system for automated parking.
To acknowledge how to program Arduino and make it work on any system.
7. List of necessities
Arduino UNO R3
RC Micro Servo (Hitec HS-55 or similar)
7-Segment Display Common anode
470 ohms resistors 1/4 w 5%
Mini breadboard 170 points
Cable jumpers Male-to-Male
Solid wire AWG #22 (breadboard jumpers)
Cardboard
aluminum foil
Alligator clips
Wooden Coffee Stirrer (the barrier)
White glue
8.
9. Real life implementation
Autonomous car-maneuvering system to perform parallel, perpendicular or
angle parking.
Enhancing the comfort and safety of driving in constrained environments to steer
the car with attention.
To ensure collision-free motion within the available space.
10. Limitations
The 7-segment display shows the maximum count when if power is gone and again
comes back.
Once the barrier is opened or closed, there is a count of the car.
At the time of entering two consecutive cars, there is a overcrowding situation.
There is a prohibition of entering and leaving two cars at a time.