Arduino based Parking Lot System

1. Electronics
Project
Arduino Based Parking Lot System

2. Members
011132065 -Mohammad Shahriar Reza
011142016-Rakib Hasan Suvo
011145021- Samrin Ahmed Riya
011142032-Sanzida Akter
011142051-Roushnara Pervin
011142065-Antara Anika Reza

3. What is Arduino?
● An open source.
● Prototyping platform.
● Easy to use hardware and software.
● Works according to the instructions to the
microcontroller to the board.

4. Why Arduino?
● Inexpensive.
● Cross-platform.
● Simple, clear programming environment.
● Open source – extensible software and hardware.
We are using
Arduino Uno R3

5. Arduino Automated Parking Lot System
● Microcontroller based Parking system.
● Keeps track of the number of cars parked (09
being the max number).
● Shows the number of slots unoccupied.
● Controls the gate-arm by itself.

6. Project Objectives
● To design and build up a prototype of an
automated car park system.
● To learn how to control the prototype system for
automated parking.
● To acknowledge how to program Arduino and
make it work on any system.

7. List of necessities
● Arduino UNO R3
● RC Micro Servo (Tower-pro SG90)
● 7-Segment Display CA
● 470 ohms resistors 1/4 w
● Mini breadboard
● Cable jumpers Male-to-Male
● Aluminum foil
● Paper clips
● White glue
● Cork sheet (base)

9. Project in Proteus

11. Real life implementation
● Autonomous car-maneuvering system to perform
parallel, perpendicular or angle parking.
● Enhancing the comfort and safety of driving in
constrained environments to steer the car with
attention.
● To ensure collision-free motion within the
available space.

12. Limitations
● The 7-segment display shows the maximum count
when if power is gone and again comes back.
● Once the barrier is opened or closed, there is a
count of the car whether there is not any entrance
or exit of the car.
● At the time of entering two consecutive cars, there
is a overcrowding situation.
● There is a prohibition of entering and leaving two
cars at a time.