How to Troubleshoot Apps for the Modern Connected Worker
D1 - virtual desktop and simulated xp installation
1.
2. STEP 1
First place the power
supply in place find the
power supply place in the
case and push it up to the
case frame
Then it should look
like this
3. STEP 2
Then add the screw at
the points to hold the
power supply in place
4. STEP 3
Then unclip the arm and lift
up the bracket to install the
CPU line up the little arrow
on the CPU and on the
socket and drop it in with
zero insertion force
5. STEP 4
After you have placed it in lower the bracket and
lower the are to lock the CPU in place
6. STEP 6
When you have finished it should look
like this
Then next apply thermal paste
7. STEP 7
Then place the CPU cooler over the CPU and
then lower it onto the CPU then press down
the 4 points on each corner until they click
into place
8. STEP 8
Then plug in the CPU
cooler power into the
motherboard this plug
should be next to the
CPU
9. STEP 9
Next get the
memory modules
and line up the
notch with the
memory socket
Then push the lever up to
lock the memory module
inplace
10. STEP 10
Then place the motherboard inside the
case remember to use standoffs to
prevent the motherboard from breaking
Then after screw the motherboard in
place so it cant move
11. STEP 10
Then take off the expansion slot
cover to install the NIC card line it
up with the socket then add a
screw to hold it in place
17. STEP 16
Then after you have slide it into
the bay then screw it into place
18. STEP 17
Then plug in the ribbon cable
into the motherboard
And plug the other end into the
disc drive, make sure to line up
the notches on the ribbon cable
19. Then get the other ribbon cable for the
floppy disk drive and plug one end into the
motherboard
And then plug the other end
into the floppy drive
As you can see the cable has
got a pin missing so you cant
plug it the wrong way
STEP 18
20. STEP 19
Then get your SATA cable
and plug one end to the
motherboard
And the other end into the
HDD drive
21. STEP 20
Then you have installed all the
internal components now you can
place both side panels back on the
case and screw them on
30. STEP 1
First put the windows xp disk in
the drive and then read the
onscreen information after you
have done that press enter to
continue onto the next step.
31. STEP 2
Now read through the
information and then if you
agree or disagree, if you
agree press F8 and if you do
not agree press ESC
32. STEP 3
Then choose the storage device
that where you want the
windows XP to be installed on
after you have chosen press
enter to continue.
33. STEP 4
Then choose what file you
want to store it on then after
press enter to continue