2. Congratulations on your ZYTO Compass purchase!
Included in your shipment:
(1) ZYTO Hand Cradle with USB cable (1) NuVision tablet
(1) Micro-USB on-the-go (OTG) cable (1) USB cable and wall charger
3. Setting up Internet connection
1. Tap or click the Wi-Fi icon in the
taskbar. If you do not see it, you
might have to tap the up arrow to
make it visible.
2. Tap or click the desired Wi-Fi net
work and tap or click the Connect
button. You can also check the box
that says“Connect automatically”if
you don’t want to manually
reconnect next time.
3. Enter the Wi-Fi password and tap
or click Next.
That’s it! You are now ready to set up Windows 10 and install the software!
4. Setting up Windows 10
1. When you first turn the tablet on,
you will notice that it looks slightly
different than a typical Windows 10
operating system.
2. The first recommended step will
be to turn“Tablet Mode”off.
Swipe the screen from left to right,
which will pull up a side menu bar.
Once you tap on the“Tablet Mode”
tile, the desktop will start looking
more familiar.
3. Next, it’s important to run a
Windows Update. To do so,
click or tap on the Windows logo
on the bottom left-hand side, then
click on“Settings”. (It will have an
icon of a gear next to it.)
5. 4. Click or tap on“Update & Security”.
Setting up Windows 10 continued
5. Click or tap on“Check for updates”.
6. Windows will automatically check
for updates and install them. Once
the updates are installed, click or tap
“Restart Now”. (You may need to scroll
down in order to see this.)
Now you‘re ready to install the ZYTO Compass software!
6. Installing the ZYTO Compass Software
1. Go to ZYTOcompass.com/install
and click or tap on“Download”.
2. Click or tap on“Install”.
3. Once the initial installation
process is complete, the software
will ask you to log in using your
email and password.
Note: You may not see the cursor,
but it will show up as you type.
7. Installing the ZYTO Compass Software continued
4. Once you log in, the software will
go through the installation and ask
you to accept the terms and
conditions. Click“Accept”to proceed.
5. Next, install the Hand Cradle
drivers. At this time, be sure you do
not have the cradle plugged in
before clicking“Next”.
6. The software will prompt you to
plug in the Hand Cradle. Be sure to
use the USB cable that came in the
Hard Cradle box. Plug the cable into
the USB port on the side of the key
board.
8. Installing the ZYTO Compass Software continued
7. If you do not have the keyboard
on hand, you may also use the OTG
cable and plug the Hand Cradle into
the side of the tablet.
*Note: The software will not recognize
the Hand Cradle if you use the long
white micro USB cable.
8. Lastly, install Adobe Reader X. You
will be prompted for permission to
proceed. Click“Yes”and the
installation will begin.
When you see the screen that has
the“New Client”,“Returning Client”,
and“Administrative Setting”options,
your setup is complete!
If you have any questions or would like assistance setting up your tablet or software,
please call our Technical Support Department at +1 801-919-3813, option 3.