1. RAJAPANDIAN.M
EMA IL: M.R AJ APAND IA N1986@ GMA IL.C OM
C ONTAC T NO: +91- 8870757661 / 8511066098
OBJECTIVE
Seeking a chance of working in a dynamic organization, where my educational,
technical knowledge, attitude for learning, problem solving abilities and especially my
long term experience in the field of quality would be utilize and get an opportunity to
improve myself and the organization.
SUMMARY OF QUALIFICATION
Proactive, dedicated and diligent professional with over 9 + years of broad hands on
experience in the mechanical construction (Refinery and Power) sector; Demonstrated
expertise in the areas of Fired Heater Fabrication & Erection, Static Equipment,
Structure, Piping Erection, Welding inspection, and Documentation of QA/QC among
others
EDUCATION
BE. Mechanical Engineering.
Full time with first class
Anna University. 2003 to 2007
CERTIFICATION
ASNT LEVEL II in
 Liquid Penetrant Testing.
 Magnetic Particle Testing.
 Radiographic Testing.
 Ultrasonic Testing.
Certified Welding Technology from WRI – BHEL INDIA
• Welding technology for Fresh Engineers
SOFTWARE SPECIALIZATION
 MSOffice.
 AutoCAD.
 Win x98

2. DUTIES & RESPONSIBILITIES
• Responsible For Stage by Stage inspection of Static & Rotating Equipment as per
approved ITP and ensure compliance of the code requirement.
• Material receiving inspection for Flanges, gasket, Bolt & nut, related fittings as per
drawing & packing list.
• Check the refractory bricks, castables , Ceramic Blankets lining for reformer, Fired
heater, as per drawing before installation,
• Inspect the verticality of Heater Radiant coils, Stack module, convection section, Flue
gas ducts and its coordination.
• Inspection of dimension, tolerance preparation of fit up and alignment according to the
drawing and specified standard documents.
• Inspection Flange face, Gasket, Bolt & Nut as per drawing specified standard
documents.
• Witnessing Bolt torque & Bolt tensioning of Equipments.
• Inspect the ID/FD Fan alignment (dial gauge / Laser alignment) Hot & Cold, tolerance
according to the standard.
• Indentifying and Issuing of Non conformance report when observed during work.
• Establish and review of welding procedure specifications (WPS) and compliance of the
code requirements.
• Monitoring and witnessing of the procedure qualification record (PQR)
• Witnessing the welder performance qualification test (WPQT) and preparation of
welder certificate and welders ID
• Implementation of the procedure specifications on the job and monitoring controls of
variables in welding process.
• Preparation of Inspection report format for welding, piping, mechanical for various
inspection activities.
• Visual and dimensional Inspection of the jobs as per drawing and review of Dim.
Report for compliance of the accuracy limit.
• Witness and review of reports of NDE results, Mechanical test and ensure compliance
of the code requirement.
• Preparation of Hydro test packages for piping get approval from clients or employer.
• Witness and review of the Hydro test, pneumatic test, surface finish, Painting
Inspection specification and painting inspections reports.
• Responsible for Blasting and Painting inspection such as DFT, WFT & Surface Profile
measurement.
• Co-ordinate with Thirty party and Clients/Employer.
• Ensuring all the construction/Inspection activities are carried out as per PQP, ITP, and
company standards required, Project Specification, Procedure and International Codes
and Standards.
• Prepared documents, inspection reports, Procedures for Inspection Methods, Method
statements, Inspection and Testing Plan in computerized environment. Maintained
Project records, reports, and final submission to client.

3. EMPLOYMENT HISTORY
QA/I ENGINEER at Heurtey Petrochem India Pvt Ltd, India From Dec 2011 to Still
Project : J3-PX4, DTA-Coker & Aromatic Heater-Jamnagar, India
Product : Fired Heaters -8nos
Client : Reliance Industries Limited
Period : Sep 2013 to still
Project : PA&NG Heaters- KFCL
Product : Heaters -3nos
Client : Kanpur Fertilizers and Chemicals –Kanpur, U.P
Period : Nov 2012 to Sep-2013
Project : Aromatic Complex-OMPL
Product : Aromatic (Isomer, Xylene, Toluene) Heaters -6nos
Client : ONGC-Mangalore Petrochemical Ltd
Period : Dec 2011 to Nov2012
Responsibilities:
• Involved Stage by Stage inspection for Fabrication & Erection of Fired Heaters.
• Establish and review of WPS, PQR and WPQT and compliance of the code
requirements.
• Fit-up, welding, Visual and dimensional Inspection of the jobs as per drawing and
review of Dimensions. Report for compliance of the accuracy limit.
• Witness and review of reports of NDT activities during Fabrication & Erection
• Refractory lining & Hot insulation inspection during application and final stages.
• Witness the alignment inspection of radiant coil after erection.
• Preparation of Hydro test packages for piping get approval from clients or employer.
• Witness and review of the Hydro test, pneumatic test, surface finish, Painting
Inspection.
• Coordinate with Instrumentation department and complete the work as per schedule
• Inspect the orientation, verticality, Alignment, Fit-up, welding and dimension
inspection during fabrication and after erection of equipment.
• Final Box up and Bolt Tightening Inspection for erected items.
• Co-ordinate with engineering team to solve the drawing issues during fabrication.
• Co-ordinate with Thirty party , Clients and Employer.
• Identifying and Issuing of Non-conformance report when observed during work.
• Documentation as per QCP for the compliance of the quality level after final inspection.

4. • Maintaining all QA/QC documents related to project and prepares the final quality
dossier.
QA/QC ENGINEER at Five Star Industries, India From April 2007 to Nov 2011
Designation : QA/QC ENGINEER.
Duration : May 2009 to Nov 2011
Designation : Asst INSPECTION ENGINEER
Duration : April 2007 to April 2009
Company Profile:
M/s Five star Industries is the Leading Heavy Fabrication and Pressure
parts Fabrication Sub-Contracting Company of BHEL-Trichy, Tamilnadu,India
Project Handled:
Heavy Fabrication:
• Fabrication of 600 MW Ceiling Girder Assembly for North Chennai Thermal Power
Station.
• Fabrication of 660 MW Ceiling Girder Assembly for NTPC's Barh Thermal Power Project.
• Fabrication of 800 MW Ceiling Girder Assembly for Krishnapattinam Thermal Power
Project
• Fabrication of Main Column assembly, Wind box assembly for 300 to 800 MW boilers.
• Fabrication of 1.25/1.5/2MW wind mill tower shells for Suzlon Energy Limited.
• Fabrication of all kind of structural items for mentioned power projects.
Pressure parts Fabrication:
• Fabrication of Boiler Drum for OTPC Tiripura project.
• Fabrication of Ring Manifold header for North Chennai Thermal power station.
• Fabrication and assembly of Air pre heater/ cooler assembly for IPP boilers.
• Fabrication Air pre Heater Assembly for Koniambo project.
• Fabrication of loose tubes, Bifurcates for Ntpc projects and Non Ntpc Projects.
• Fabrication of Re-heater Coil assembly, Super Heater coil assembly and Economizer
Coil assembly for Bellary,Bathinda,Ukai,Sikkah, shree singaji, PPCL Bawana projects.
• Fabrication of Water Wall Panels for Marwa, Bokkaro, Bina, Shree Singaji, Adhunik
projects.
• Fabrication of SH Header,RH Header and Module Header for Bellary, shree singaji,PPCL
Bawana project,Adhunik.
• Fabrication of assembly of Reheater Coil,Super heater coil and Economiser coil for
Ukai, Durgapur,Becl,JITPL,Marwa,DSTPP,KTPP , projects.

5. • Fabrication of Fired Heater components such Convection Module assembly, Stack
Module and Structural items.
Responsibilities:
• Inspection at various stages like In coming Raw material, first of trial, Layout check,
Fit up, Dimensional check, Welding check, Pre heating ,Post Heating , PWHT ,Hydro
Witness, Final assembly dimension and painting inspection as per procedure.
• Preparation of WPS / PQR./ WQT
• Stage wise inspection of welding.(fit up, root pass visual & NDT, Final weld Visual
&NDT)
• To check the field welds & consumables comply with project qualifications
• To check all repairs are perform correctly & non destructive tests are regularly
repeated. To keep a report file for all non-destructive tests.
• Supervising & coordinating with work force in executing job to completion on time as
per work plan & with safety precautions & procedures
• Coordinating with quality control departments & representing matters with the client.
• Preparation of standardized Stage Inspection Reports and Documentation works,
preparation of IBR documents like form iii B etc
• Preparation of Material Traceability, Weld Map and Inspection Reports.
• Coordination with Client / Third party inspection agency personnel.
• Preparation of Final Dossier
PERSONAL DETAILS
Father’s Name : Maruthavanan.R
Date of Birth : 09.02.1986
Marital Status : Married
Languages Known : Tamil, English ,Malayalam and Hindi.
Passport No. : G7353028
Date of Expiry : Feb-2018
Permanent Address : 300,Maris nagar,Mathur,Kulathur taluka,Pudukkottai-622515,
DECLARATION
I do hereby confirm that the information given above is true to the best of my
knowledge and belief.