This training course is an introduction to the fouling mitigation technologies for heat exchangers like Shell & Tube heat exchangers, Air Cooled heat exchangers, and Compact Type heat exchangers. The course will provide details on the maintenance aspects of several heat exchanger types in relation to process and mechanical design. Many case studies will be presented to show failures, mismatches. The thermal and mechanical design aspect in relation to fouling behavior is conducted using sophisticated computer software based on HTRI software. Attendees will be oered problem case studies in order to reach solutions on their own.

1. Supported by
02nd–04thNovember2015atBandung,Indonesia
ImproveYourHeatExchangerShell&TubeandCompactTypesPerformancewithLeadingExpert
Petrosync Lecturer
“Large amount of know-how and experience and very practical for the day to day work!”
“Bert is able to make the right connection between the theory and practical issues of
heat exchangers!”
“Much know-how presented in an calm and orderly way with good examples!”
“This is an expert and has many usefull examples!”
“Happy to have had this lecture from expert Bert!”
Testimonials
CaseStudies,
Discussion,Simulation
Learningandmany
Practicalexercises!
Mr. Bert Boxma Chemical Engineer Bsc.
Leading Heat Exchanger Consultant
CEO & President of Heat Transfer ABC B.V
Been leading courses for more than 200 companies since year 2000
Expert in heat exchanger type selection, special thermal/hydraulic
design, latest enhanced heat transfer technologies and govern-
mentalsubsidyadvices
Major Heat Exchanger Projects
Crude Oil Fouling experience using Helixchanger Technology.
Resolving fouling in an Economiser for an Air Liquification
Plant.
Heat Exchanger Fouling Mitigation Technology
Design & engineering of an advanced helical baffle heat
exchanger design for gas plant warming up cryogenic
subcooled propane liquid with water avoiding freezing.
Trouble Shooting experience for heavy fouling in Plate &
Frame heat exchanger.
FreeHeatExchanger
SelectionTool!
Over 30 years of experience in heat exchanger
The founder and Chairman of the HTRI Communication
Committee in Holland

2. Masterclass Overview
The need for proper energy management has considerably increased the importance of heat exchange equipment over
the past 2-3 decades. Enormous costs are involved with heat exchanger fouling. Latest studies show that in highly
industrialized countries total fouling costs are about 0,25% of Gross National Product.
This training course is an introduction to the fouling mitigation technologies for heat exchangers like Shell & Tube heat
exchangers, Air Cooled heat exchangers, and Compact Type heat exchangers. The course will provide details on the
maintenance aspects of several heat exchanger types in relation to process and mechanical design. Many case studies
will be presented to show failures, mismatches. The thermal and mechanical design aspect in relation to fouling
behavior is conducted using sophisticated computer software based on HTRI software. Attendees will be offered
problem case studies in order to reach solutions on their own.
To get a full picture of proven (advanced) heat transfer technologies a training module for other types of heat
exchangers is included. Besides Air Cooled we discuss Compact heat exchangers in more detail with all their pro’s and
con’s and fouling mitigation behavior.
Each attendee must bring a Laptop computer with Microsoft operating system and Scientific Calculator
Specially Designed for
The course is designed for professionals who want to improve the performance of heat exchanger in their
company for shell & tube and compact types
Mechanical Engineer
Design Engineer
Maintenance Engineer
Instrument Engineer
Project Engineer
Process Engineer
Heat Transfer Engineer
Plant Engineer
Operation Engineer
Limited Attendees
The course has limited seats to ensure maximum learning and experience for all delegates.
Certificate of Attendance
You will receive a Certificate of Attendance bearing the signatures of the Trainer upon successful completion of the course. This certificate is proof of
your continuing professional development.
Interactive Training
You will be attending a training designed to share both the latest knowledge and practical experience through interactive sessions. This will provide
you with a deeper and more long-term understanding of your current issues.
High Quality Course Materials
Printed course manual will provide you with working materials throughout the course and will be an invaluable source of reference for you and your
colleagues afterward. You can follow course progress on your laptop with soft copies provided.
Petrosync Quality
Masterclass Objectives
For those engineers not familiar with fouling behavior in shell and tube heat exchangers, this course will provide a
broad understanding of the technology and an excellent base for further learning.
For those responsible for maintenance, the training is intended to illustrate the interaction between the thermal and
mechanical design, the understanding of which will lead to more reliable design outcomes.
For those coming from an operating environment, the course will lead to a greater knowledge of the maintenance,
inspection and repair needs of shell and tube heat exchangers, including information on common causes of failure.
Solutions will be offered using latest “state of art” technologies are used to prevent fouling, tube vibration and
throughput limitations.

3. 1
3
Heat Exchanger Fouling Mitigation Technology
02nd – 04th November 2015 at Bandung, Indonesia
SAVE COST • IMPROVE PERFORMANCE • REDUCE RISK
PetroSync understands that in current economic climate, getting an excellent return on your training investment is critical for all our clients. This
excellent training can be conducted exclusively for your organization. The training can be tailored to meet your specific needs at your preferred
location and time. We will meet you anywhere around the globe.
If you like to know more about this excellent program, please contact on +65 6415 4500 or email general@petrosync.com
IN-HOUSE SOLUTIONS
1
Introduction to Fouling, Causes, Consequences,
and Mitigation
• Type of Fouling
• Parameters Which Affect Fouling
• Cooling Water Fouling
• Effect Fouling Factors
Case Studies
Fouling Aspects in Shell & Tube Heat Exchangers
• TEMA Type Selection
(mechanical and cleaning aspects)
• Baffle Selection
(conventional, helical, expanded metal)
• Tube Selection
(bare, low-fin, high-fin, twisted tube)
• Tube Insert Technologies
(wire mesh, spring wire, coiled strip)
• In Tube Self Cleaning Heat Exchanger
• Ball/Brush Type Cleaning Systems
• Effect of Tube Plugging
Case Studies & HTRI Simulations
Tube Vibration Causing Failures
• Basic Principles
• Fluid Elastic Vibration
• Acoustic Vibration
Case Studies
Introduction to Air Cooled Heat Exchangers
• General Description
• Nomenclature
• Key Components (louvers, fans)
• Forced/Induced Draft
• A-Frame
1
2
Mechanical & Maintenance Aspects
• Type Selection
• Fouling Behavior/Mitigation
• Tube Insert Technologies
• Header Types
• High Fin Tube Types
Case Studies
Introduction to Special Type
• Open Rack Vaporizer (LNG)
• Submerged Vaporizer (LNG)
• Waterbath Vaporizers
Discussions and Questions
• Heat Exchanger Selection Software (free of charge
for attendees)
Introduction to Compact Heat Exchangers &
Their Fouling Mitigation Behavior
• Double Pipe / Multi Tube
• Plate & Frame
• Spiral Plate
• Brazed Aluminum
• Printed Circuit
• Spiral Coil (LNG, CO2)
• Electrical Heater
Case Study
DAY 1
2
DAY 2
DAY 3

4. Petrosync Lecturer
Mr. Bert Boxma Chemical Engineer Bsc.
08:00–09:00 Registration (Day1)
09:00–11:00 Session I
11:00–11:15 Refreshment & Networking Session I
11:15–13:00 Session II
13:00–14:00
14:00–15:30 Session III
15:30–15:45 Refreshment & Networking Session II
15:45–17:00 Session IV
17:00 End of Day
PROGRAM SCHEDULE
Lunch
Leading Heat Exchanger Consultant
Bert Boxma is the CEO and president of Heat Transfer ABC B.V. with over 30
years of experience in Heat Exchanger. He is an international expert in heat
exchanger type selection, special thermal/hydraulic design, latest enhanced
heat transfer technologies, and governmental subsidy advices. Bert has
alreadypresentedmanytrainingcourses,attendedbyalmost800employees
from more than 200 companies (e.g. Shell Global Solutions, Petronas, BAYER,
DSM, Nestle, Heineken, Repsol YPF, IDESA, CB&I, Fluor and many others).
CLIENT LIST
• BP
• TOTAL
• Shell Global Solutions
• BASF
• Technip
• Aker Kvaerner
• AKZO
• Arcelor Mittal
• DSM
• Electrabel
• FLUOR
• Jacobs
• NUON Power
• Purac Biochem
• Tijen Twaron
• Petronas
• BAYER
Chairman and member of HTRI’s first Communication Committee
CC-Holland (Chairman 1994 - 1997 ; Member 2004 – Present)
Chairman of NLAHX SenterNovem Working Party (1999 - 2010)
Member of ESDU Crude Oil Fouling Working Party (1999 - 2003)
Guest Lecturer Technical University Twente, Delft & Eindhoven,
The Netherlands
Guest Lecturer HTRI European Seminar October (2004)
Member of the working Committee ISO 16812
HTRI’s Representative for The Netherlands (2008 - Present)
Representative of Koch Heat Transfer and Cal Gavin Ltd.
ADDITIONAL POSITIONS & CREDENTIALS
Reduced Total Life Cycle Costs Using Helixchanger Heat Exchangers and Enhancement
Technology for the Process Industries.
(Co-Author, Davos, Switzerland July, 2001)
Reduced Total Life Cycle Costs Using Helixchanger Heat Exchangers.
(Co-Author, Hamilton, Canada, October, 2003)
Most frequently used Heat Exchangers from pioneering research to application worldwide
(Co-Author, Prague, Czech Republic, October, 2004)
PUBLICATIONS

5. Group discount is based on standard price
* For 5 or more delegates, please inquire for more attractive package.
* Important: Please note that registration without payment will incur a SGD 200 administration fee.
1st Delegate Name
Direct Line Number: Email:
Job Title: Department:
Head of Department:
Company:____________________________________________ Industry : __________________________________
Address: _______________________________________________________Postcode: _________________________
Country: ________________________Email: __________________________________________________________
Attention Invoice to: ______________________________________________________________________________
Direct Line Number: ______________________________ Fax: _____________________________________________
PAYMENTMETHODS
DELEGATESDETAILS
Please note:
- Indicate if you have already registered by Phone Fax Email Web
I agree to PetroSync’s terms & conditions, payment terms, and cancellation policy.
By Credit Card :
Please debit my credit card: Visa MasterCard
Card Number:
Name printed on card: _____________________________________________________________________
Expiry Date:
Security Code:
INVOICEDETAILS
Authorized Signature : ____________________________________________________________________________
Mrs Ms Dr OthersMr
PAYMENT TERMS : Payment is due in full at the time of registration. Full payment is mandatory for event attendance.
2nd Delegate Name
Direct Line Number: Email:
Job Title: Department:
Head of Department:
Mrs Ms Dr OthersMr
3rd Delegate Name
Direct Line Number: Email:
Job Title: Department:
Head of Department:
Mrs Ms Dr OthersMr
INVESTMENT PACKAGES
02nd – 04th November 2015 at Bandung, Indonesia
AMEX
* To enjoy the promotion & discount offer, payment must be made before deadline
* Prices include lunches, refreshments and materials. Promotion & discount cannot be combined with other promotional offers.
- If you have not received an acknowledgement before the training, please call us to confirm your booking.
Confirmation
HEAT EXCHANGER FOULING MITIGATION TECHNOLOGY
Standard Price
Early Bird Offer
Group Discount
(3 or more delegates)
SGD 2,995
SGD 2,795
Please checklist the package that you are attending!
PROGRAMMECONSULTANT
TERMSANDCONDITIONS
DISCLAIMER
Please note that trainers and topics were confirmed at
the time of publishing; however, PetroSync may
necessitate substitutions, alterations or cancellations of
the trainers or topics. As such, PetroSync reserves the
right to change or cancel any part of its published
programme due to unforeseen circumstances. Any
substitutions or alterations will be updated on our web
page as soon as possible.
DATAPROTECTION
The information you provide will be safeguarded by
PetroSync that may be used to keep you informed of
relevant products and services. As an international
group we may transfer your data on a global basis for
the purpose indicated above. If you do not want us to
share your information with other reputable companies,
please tick this box
CANCELLATIONPOLICY
You may substitute delegates at any time as long as
reasonable advance notice is given to PetroSync. For
any cancellation received in writing not less than
fourteen (14) working days prior to the training course,
you will receive a credit voucher worth total transaction
with less a SGD 200 administration fee and any related
bank or credit card charges.
Delegates who cancel less than fourteen (14) working
days of the training course, or who do not attend the
course, are liable to pay the full course fee and no
refunds will be granted.
In the event that PetroSync cancels or postpones an
event for any reason and that the delegate is unable or
unwilling to attend in on the rescheduled date, you will
receive a credit voucher for 100% of the contract fee
paid. You may use this credit voucher for another
PetroSync to be mutually agreed with PetroSync, which
must occur within a year from the date of postponement.
PetroSync is not responsible for any loss or damage as
a result of the cancellation policy. PetroSync will assume
no liability whatsoever in the event this event is
cancelled, rescheduled or postponed due to any Act of
God, fire, act of government or state, war, civil
commotion, insurrection, embargo, industrial action, or
any other reason beyond management control.
CERTIFICATEOFATTENDANCE
70% attendance is required for PetroSync's Certificate
of Attendance.
DETAILS
Please accept our apologies for mail or email that is
incorrectly addressed.
Please email us at registration@petrosync.com and
inform us of any incorrect details. We will amend them
accordingly.
CHARGES&FEE(s)
- For Payment by Direct TelegraphicTransfer,
client has to bear both local and oversea bank
charges.
- For credit card payment, there is additional
4% credit card processsing fee.
Contact : Cay Aagen
Email : registration@petrosync.com
Phone : +65 6415 4500
Fax : +65 6826 4322
Investment Packages
By Direct Transfer : Please quote invoice number(s) on remittance advice
PetroSync Global Pte Ltd Bank details:
All bank charges to be borne by payer. Please ensure that PetroSync Global Pte Ltd receives the full invoiced amount.
Account Name: PetroSync Global Pte Ltd
Bank Name : DBS Bank Ltd
Bank Code : 7171 • Bank Swift Code : DBSSSGSGXXX • Branch code : 288
Account No : • SGD : 288-901898-0 • USD : 0288-002682-01-6
Bank Address : 12 Marina Boulevard, Level 3. Marina Bay Financial Centre Tower 3. Singapore 018982
SGD 2,695
Course FeeDeadline
30th Oct 2015
30th Oct 2015
02nd Oct 2015