SY

1. MEE1001 Engineering Drawing L T P J C
Pre-Req: Nil 1 0 4 0 3
Module Topics
L
Hrs
SLO
1 Lettering and Dimensioning: Introduction, lettering practice,
Elements of dimensioning - systems of dimensioning.
1 6, 17
2 Geometric Constructions: Free hand sketching, Conic sections,
Special curves.
2 6, 17
3 Projection of Points: First and Third Angle Projections;
Projection of points.
Projection of Lines: Projection of straight lines (First angle
projection only); Projection of lines inclined to one plane and both
planes, true length and true inclinations.
3 6, 17
4 Projection of solids: Classification of solids, Projection of solids in
simple position, Projection of solids inclined to one plane.
Sections of Solids: Right regular solids and auxiliary views for the
true shape of the sections.
4 5, 6, 17
5 Development of Surfaces:Development of surfaces for various
regular solids.
2 5, 6, 17
6 Isometric Projection: Isometric scales, Isometric projections of
simple and combination of solids.
Perspective Projection: Orthographic representation of a
perspective views – Plane figures and simple solids - Visual ray
method.
2 5, 6, 17
7 Orthographic Projection: Conversion of pictorial view into
orthographic Projection.
1 5, 6, 17
Total Lecture Hours 15
Mode of Delivery: Flipped Class Room, Video Lectures
Text Books
1. Venugopal K and Prabhu Raja V, “Engineering Graphics”, New AGE International
Publishers, 2015.
References
1. N. D. Bhatt, Engineering Drawing, Charotar publishing House, 2012.
2. Natarajan, K. V., A Text book of Engineering Graphics, Dhanalakshmi Publishers, 2009.