Processing & Properties of Floor and Wall Tiles.pptx
Jamuna910 ppt
1. CENTRAL INSTITUTE OF
TECHNOLOGY, RAIPUR
PRESENTED BY
PARAMJEET PATEL
Anil ku. Kashyap
Avinash shrives
Sameer mishra
MINING 5TH SEM
VOCATINAL TRAINING REPORT 2015
IN JAMUNA-KOTMA AREA
2. INDEX
1.INRODUCTION
2.GEOLOGICAL INFORMATION
3.TECHNICAL INFORMATION
4.SURFACE FEATURE AND UNDER GROUND FEATURE
5.OPENING INFORMATION
6..METHOD OF WORKING
7.DEPILLARING INFORMATION
8.PILLAR EXTRACTION INFORMATION
9.CYCLE OF OPRATION
10. SAFETY FOR SUPPORT INFORMATION
11. MACHINERY USED IN MINE
12.VENTILATION REPORT
3. INTRODUCTION
NAME OF AREA :- Jamuna-kotma.
NAME OF MINE:- Jamuna 9&10.
DATE OF MINE OPENING:- 23/03/1985.
LOCATION OF MINE :- Jamuna 9&10 mine is located in Anuppur district
of M.P. in In Jamuna9&10 mine is approachable as following:-
By train from :- 5km from Kotma station.
3km from Harad station.
By roadway:- 35km from NH-78 Anuppur to Manendragarh.
PRODUCTION PER DAY:-650TE
4. GEOLOGICAL INFORMATIOn
Jamuna 9&10 mine form apart of the south Rewa plateau constituting a part of
Sohagpur plain.
The geological sequence is encountered in represented by Alluvium , Barakars ,
Talchirs and Archeans .
Only Barakar formation consist of workable coal seam
The general strike of coal seam is east-west.
seam gradient is:- 1in 27 in the direction of S31°E
The lower kotma seam has been traversed by fault ,ranging in throw up to 6m.
There are for coal bearing in the kotma block investigate for underground mining
the seams are as follows:-
Upper kotma
Middle kotma
Lower kotma 1
Lower kotma 2
there only lower kotma 2& middle kotma seams are economically workable.
5. TECHNICAL INFORMATION
No. of workable coal seam M.K.&L.K.-2
Name of seam being worked L.K.2
Average thickness of coal seam 2.80 M
Nature of roof SANDSTONE
Nature of floor SHALY sandstone
Make of water 800gpm
Pumping capacity 1500gpm
Degree of gassiness Degree 1
Incubation period of L.K.2 seam 12 month
Minimum cover L.K.2 seam 40m
Maximum cover L.K.2 seam 91m
Coal grade G6
Parting between M.K.& L.K.2 25-40 M
Life of mine 6 YEAR
Calorific value of L.K.2 seam 5726KCal/KG
6. SURFACE FEATURE OF MINE
B
1
2
3
4
M
O
L
C
W
T
I I
M MAGINE ROOM
COAL BUNKERS
MANAGER OFFICE
OFFICE OF
FOLLOWING-
1.VENTILATION OFFICER
2.SAFETY OFFICER
3.ENGINEER’S
4.LEAVE DPP.
INCLINE NO.10
INCLINE NO. 9
TAMPLE
WORKSHOPE
MAGINE OFFICE
CANTEEN
B
1
M
O
I
I
T
W
C
7. UNDERGROUD FEATURE
MINER’S STATION BENCH, TABLE,
FIRE FITING STATION FIRE EXTINGUISHER CYLENDERS AND BUCKET FILLED
WITH SAND
RESERVE STATION EXLOSIVE, ROOF BOLTING RODS E.T.C
CONVERGENCE STATION
AIR MESURNMENT STATION
FIRST AID STATION STRECHER, FIRST AID BOX,E.T.C
AIR BLAST STATION
SUB STATION TRANSFORMERS
8. OPENING INFORMATION
The coal seam of Jamuna 9&10 mine has been approached by
two inclines and one shaft.
NAME OF ENTERY LENGTH/DEPTH GRADIENT PURPOSE
INCLINE NO. 9 374 M 1 IN5 TRAVELING
ROADWAY,BELT WAY,
INTAKE AIR WAY.
INCLINE NO.10 348 M 1IN 4 HAULAGE ROAD
WAY,INTAKE AIR
WAY.
SHAFT 76M(4.2 M IN
DIAMETER.)
---------------------- RETURN AIR WAY
9. METHOD OF WORKING
Jamuna 9&10 mine has two workable coal seam
middle kotma
lower kotma-2
Both seams are developed by bord and pillar method of mining.
Now in present lower kotma -2 seam is depillaring by diagonal slicing technic in
Panel-11A
Panel- 16B
In this mine coal is extracted by solid blasting of coal
14. Dressing &DRILLING
Diameter of drilling rod -32m
Length of drill hole – 1m to 1.2m
Diameter of drill hole- 42mm
Length Of drilling rod -1.5m
DRILLING
UNIVERSAL
DRILL
MACHINE
COAL DRILL
MACHINE
15. CHARGING and blasting
Explosive Name- Pentadyne (P5)
Explosive weight- 185g
Explosive used in one hole -370g to555g
Charging time of one hole-25s
Detonator used –ordinary electric detonator
18. SUPPORT USED IN MINE
Following supports are used in depillaring under ground coal mine:-
• Steel & Wooden Cog support.
• Prop support.
• Cross bar support.
• Roof bolting by roof support.
• Roof stitching by waste wire rope.
• W plate support.
• Steel cog &corner prop support is used specially for depillaring area.
WOODEN COG
STEEL COG
ROOF BOLTING
PROPE SUPPORT
POWER TRANSMITION CABEL
19. VENTILATION INFORMATION
In Jamuna 9&10 mine mechanical ventilation is applied for ventilate the mine.
Details of mechanical ventilator are given bellow:-
Particular Detail
Type Axial flow fan (Exhaust)
Fan diameter 2000 MM
Fan pulley diameter 211inch.
Fan R.P.M 800 R.P.M
Motor 120h.p, 1440 R.P.M
Motor pulley diameter 12 inch
No. of blade in fan 08
Blade angle 19°
Humidity 96%
No. of person employ in shift 235 per shift
21. MACHINERY USED IN MINE
S
no.
MACHINE NAME QUNTITY
01 Coal drill machine 07
02 Universal drill
machine(U.D.M)
02
03 Load hole dumper(L.H.D) 03
04 Side discharge loader 01
05 Direct haulage 03
06 Endless haulage 01
07 Pony belt conveyors
08 Main belt conveyor etc. 01
Following machines are used in mine:-