1540 Ch 6 Overview

1. Fire Protection Systems
Third Edition
Chapter 6 — Standpipe and Hose Systems

2. Overview/Introduction
‣ This chapter discusses the importance of a standpipe system to
firefighting.

3. ‣ Upon successful completion of this lesson, the student shall be able
to:
‣ List and describe the different types of standpipes and the
different standpipe classifications.
‣ List and describe the different standpipe system components.
‣ State when and where standpipes and hose systems are required
in buildings.
‣ Reference the design and installation standards that apply to
standpipes.
‣ State the minimum standpipe system design pressure and flow
requirements.
‣ Reference the inspection, testing, and maintenance
requirements.
‣ Recognize the possible impairments to standpipe systems.
Learning Objectives

4. Section
I. Introduction
II. Types of Standpipe Systems
III. Classification of Standpipe Systems
IV. Standpipe System Components
V. Required Installations
VI. Design and Installation Standards
VII. Water Pressure and Flow Requirements
VIII. Inspection, Testing, and Maintenance Requirements
Chapter Content