Manas, a premier steam flow meter manufacturer, offers Model SFMc-150, which is applicable for measuring flow rates of saturated and superheated steam, mass flow rates of Boiler feed Water in closed conduits. It is based on one of the time-tested principles of flow measurement, the differential pressure measurement across the orifice.
The steam flow meter is a complete engineered package to suit user requirements. Hence there is no hassle during installation. There are no moving parts and hence the unit works without problem for a long period. No wiring connections are required during installation. Installation is easy because very little care needs to be taken at the site during installation to avoid leakages.
2. www.manasmicro.com
Introduction
• Applicable for measuring flow rates of saturated and
superheated steam, mass flow rates of Boiler feed
Water in closed conduits.
• It can be used as a heat energy transfer meter to
measure thermal energy using various fluids (including
thermic fluids / thermic oils).
• No moving parts and no wiring hence easy installation.
3. www.manasmicro.com
Features of Steam Flow Meter
• Size: 1 inch to 14 inch
• Type of flow element: Differential flow
element
• Density compensation: Online monitoring
and compensation of density
• Communication protocol: MODBUS, RTU.
• Used to measure the flow rate of boiler
water in closed conduits.
• Used to measure the flow of Saturated
(100°C to 300°C) and Super-heated
(300°C – 600°C) steam in closed conduits
for pressures up to 30bar.
• Can be used as a heat energy transfer
meter to measure thermal energy using
various fluids which are being used as the
heat transfer medium.